CPU: National Semiconductor Geode GX1 266Mhz Mainboard Chipset: National Semiconductor CS5530A I dunno what chipset use in SuperIO chipset. Sorry.
root@xxxx:~# lspci -vvv 0000:00:00.0 Host bridge: Cyrix Corporation PCI Master Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0
0000:00:0e.0 Ethernet controller: National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (63750ns min, 63750ns max) Interrupt: pin A routed to IRQ 15 Region 0: I/O ports at f800 [size=256] Region 1: Memory at fedff000 (32-bit, non-prefetchable) [size=4K] Expansion ROM at <unassigned> [disabled] [size=64K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=320mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME+
0000:00:12.0 ISA bridge: Cyrix Corporation 5530 Legacy [Kahlua] (rev 30) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, Cache Line Size: 0x04 (16 bytes)
0000:00:12.1 Bridge: Cyrix Corporation 5530 SMI [Kahlua] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Region 0: Memory at 40012000 (32-bit, non-prefetchable) [size=256]
0000:00:12.2 IDE interface: Cyrix Corporation 5530 IDE [Kahlua] (prog-if 80 [Master]) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Region 4: I/O ports at fc00 [size=16]
0000:00:12.3 Multimedia audio controller: Cyrix Corporation 5530 Audio [Kahlua] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Region 0: Memory at 40011000 (32-bit, non-prefetchable) [size=128]
0000:00:12.4 VGA compatible controller: Cyrix Corporation 5530 Video [Kahlua] (prog-if 00 [VGA]) Subsystem: Cyrix Corporation: Unknown device 0001 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Region 0: Memory at 40800000 (32-bit, non-prefetchable) [size=8M]
0000:00:13.0 USB Controller: Compaq Computer Corporation ZFMicro Chipset USB (rev 06) (prog-if 10 [OHCI]) Subsystem: Compaq Computer Corporation ZFMicro Chipset USB Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 11 Region 0: Memory at fedfe000 (32-bit, non-prefetchable) [size=4K]
here is more infomation http://kil13r.info/hardware.html (crowled by lshw util)
sorry for my poor english.
- Chae Jong-bin
unknown user schrieb:
CPU: National Semiconductor Geode GX1 266Mhz Mainboard Chipset: National Semiconductor CS5530A I dunno what chipset use in SuperIO chipset. Sorry.
Have a look at the LinuxBios sources under amd. AMD has take over the national semiconducter stuff.
The chipset and cpu should be nearly the same.
chris
Thanks for advice.
- Chae Jong-bin
-
Christian Sühs -
unknown user