[LinuxBIOS] r2867 - trunk/LinuxBIOSv2/src/mainboard/msi/ms7260

Author: uwe
Date: 2007-10-17 03:57:14 +0200 (Wed, 17 Oct 2007)
New Revision: 2867

Modified:
   trunk/LinuxBIOSv2/src/mainboard/msi/ms7260/Config.lb
Log:
Fix up totally broken Super I/O setup on the MSI MS-7260 (K9N Neo).

This has not been working at all until now. With this fix, keyboard,
mouse, parallel port, and the Super I/O sensors work fine (tested
on actual hardware).

Signed-off-by: Uwe Hermann 
Acked-by: Uwe Hermann

Modified: trunk/LinuxBIOSv2/src/mainboard/msi/ms7260/Config.lb
===================================================================
--- trunk/LinuxBIOSv2/src/mainboard/msi/ms7260/Config.lb	2007-10-16 23:36:34 UTC (rev 2866)
+++ trunk/LinuxBIOSv2/src/mainboard/msi/ms7260/Config.lb	2007-10-17 01:57:14 UTC (rev 2867)
@@ -182,31 +182,46 @@
           device pci 0.0 on end			# HT
           device pci 1.0 on			# LPC
             chip superio/winbond/w83627ehg	# Super I/O
-              device pnp 4e.5 on		# Com1
-                io 0x60 = 0x3f8
-                irq 0x70 = 4
-              end
-              device pnp 4e.6 off		# Com2 / IrDA
-                io 0x60 = 0x2f8
-                irq 0x70 = 3
-              end
-              device pnp 4e.7 on		# Floppy
+              device pnp 4e.0 on		# Floppy
                 io 0x60 = 0x3f0
                 irq 0x70 = 6
                 drq 0x74 = 2
               end
-              device pnp 4e.8 on		# Parallel port
+              device pnp 4e.1 on		# Parallel port
                 io 0x60 = 0x378
                 irq 0x70 = 7
               end
-              device pnp 4e.b on		# PS/2 keyboard
+              device pnp 4e.2 on		# Com1
+                io 0x60 = 0x3f8
+                irq 0x70 = 4
+              end
+              device pnp 4e.3 on		# Com2 / IrDA
+                io 0x60 = 0x2f8
+                irq 0x70 = 3
+              end
+              device pnp 4e.5 on		# PS/2 keyboard
                 io 0x60 = 0x60
                 io 0x62 = 0x64
-                irq 0x70 = 1
+                irq 0x70 = 1			# PS/2 keyboard IRQ
+                irq 0x72 = 12			# PS/2 mouse IRQ
               end
-              device pnp 4e.c on		# PS/2 mouse
-                irq 0x70 = 12
+              device pnp 4e.6 off		# Serial flash interface
+                # io 0x62 = 0x100
               end
+              device pnp 4e.7 off		# GPIO1/6, game port, MIDI port
+                # io 0x60 = 0x220		# Datasheet: 0x201
+                # io 0x62 = 0x300		# Datasheet: 0x330
+                # irq 0x70 = 9
+              end
+              device pnp 4e.8 off		# WDTO#, PLED
+              end
+              device pnp 4e.9 off		# GPIO2/3/4/5, SUSLED
+              end
+              device pnp 4e.a off		# ACPI
+              end
+              device pnp 4e.b on		# HWM (for lm-sensors)
+                io 0x60 = 0xa10
+              end
             end
           end
           device pci 1.1 on			# SM 0