Ok. So a bit more digging and Bayou looks like something worth looking rather than FILO CBFS support.
Drawback is that it looks like Bayou is not really CBFS friendly right now and sort of duplicates some functionality that you get with CBFS too ??
Also, this means ending up with effectively a minimum 3 payloads in precious Flash rather than 2 (Bayou + Payload2 + (FILO --> /dev/hda)) Vs ((FILO --> /dev/hda) + Payload2)
Hmmmm. Think I still like the idea of direct CBFS support in FILO.
-----Original Message----- From: Harrison, Jon (SELEX GALILEO, UK) Sent: 19 August 2009 13:34 To: 'coreboot@coreboot.org' Subject: [filo] How to boot secondary payload from flash using FILO ?
Hi Guys,
What I'd like to do now is to use filo to boot either Linux for SATA (Working already) or a second Payload/ElfImage from Flash.
Ideally, for maximum efficiency, I'd like to be able to pull the second payload into the CBFS image that is programmed and have FILO load the elfImage from CBFS.
I'm happy to do some work on this, if it's not there right now, and someone can give me an inital steer into the code.
Any alterantive suggestions ?
Jon
SELEX Sensors and Airborne Systems Limited Registered Office: Sigma House, Christopher Martin Road, Basildon, Essex SS14 3EL A company registered in England & Wales. Company no. 02426132 ******************************************************************** This email and any attachments are confidential to the intended recipient and may also be privileged. If you are not the intended recipient please delete it from your system and notify the sender. You should not copy it or use it for any purpose nor disclose or distribute its contents to any other person. ********************************************************************