[LinuxBIOS] 答复: MSI ms9282 with etherboot restart again and again

Dr. Lu,

Use the new kernel seems more effective . I installed
suse10.0(64bit ) + kernel(2.6.18-rc5) and use mkelfImage build elf . and
I find the elf  image boot quite fine.

I can jump into OS now  though many devices do not fuction.

Thanks

bxshi

_____

发件人: Lu, Yinghai [mailto:[e-mail]] 
发送时间: 2006年9月19日 0:41
收件人: [e-mail]; [e-mail]
抄送: [e-mail]; [e-mail]
主题: RE: MSI ms9282 with etherboot restart again and again

Can you try

1.	use latest kernel  (2.6.18?)+ suse 9.3 (64bit) rescue initrd 
2.	use mkelf to build elf and put elf in your HD.

I’m just back to office, Please let me ping NV again about MCP55.

Thanks

Yinghai Lu

_____

From: [e-mail] [mailto:[e-mail]] 
Sent: Monday, September 18, 2006 4:24 AM
To: [e-mail]
Cc: [e-mail]; [e-mail]
Subject: MSI ms9282 with etherboot restart again and again

Dear  Dr. Lu,

I tried to boot kernel on ide hdd with etherboot ,  but after it shown
“Jumping to entry point ” , it restart again and again. (the log is
below) ? what maybe  the problem?

And is there any good news for Nvidia mcp55?

Thanks.

bxshi

Etherboot 5.4.2 (GPL) http://etherboot.org

Drivers: TG3 FILO   Images: NBI ELF

Protocols: DHCP TFTP

Relocating _text from: [000100e0,000682d0) to [3fea7e10,3ff00000)

Boot from (N)etwork (D)isk or (Q)uit?

Probing pci nic...

Probing isa nic...

Probing pci disk...

[FILO]FILO version 0.4.1 (root@suse101) Mon Sep 18 18:52:42 CST 2006

Press <Enter> for default boot, or <Esc> for boot prompt... timed out

boot: hda1:/vmlinuz-2.4.20-6smp initrd=/initrd-2.4.20-6smp.img ro
root=/dev/hda2 console=tty0 console=ttyS0,10

hda: LBA: FUJITSU MHV2040AT

Mounted ext2fs

Found Linux version 2.4.20-6smp ([e-mail])
#1 SMP Thu Feb 27 09:36:38 EST 2003 bz.

Loading kernel... ok

Loading initrd... ok

Jumping to entry point...

INIT detected from  ---- {APICID = 00 NODEID = 00 COREID = 00} ---

Issuing SOFT_RESET...

*****CONFIDENTIAL INFORMATION*****

This email is intended only for the use of the person or entity to whom
it is addressed and contains information that may be subject to and/or
may be restricted from disclosure by contract or applicable law. If you
are not the intended recipient of this email, be advised that any
disclosure, copy, distribution or use of the contents of this message is
strictly prohibited. If you are not the intended recipient of this
email, please notify the sender that you have received this in error by
replying to this message. Then, please delete it from your system. Thank
you.

*****CONFIDENTIAL INFORMATION*****

This email is intended only for the use of the person or entity to whom it is addressed and contains information that may be subject to and/or may be restricted from disclosure by contract or applicable  law. If you are not the intended recipient of this email, be advised that any disclosure, copy, distribution or use of the contents of this message is strictly prohibited. If you are not the intended recipient of this email, please notify the sender that you have received this in error by replying to this message. Then, please delete it from your system. Thank you.