Re: [LinuxBIOS] linuxbios Digest, Vol 25, Issue 92

[C.-Valentin Schmitt]

already tried ? this ?
flash with flash-light ?
maybe door-ring ? if sss=true ?;
> -----Ursprüngliche Nachricht-----
> Von: [e-mail]
> Gesendet: 22.03.07 15:07:27
> An: [e-mail]
> Betreff: linuxbios Digest, Vol 25, Issue 92
> Send linuxbios mailing list submissions to
>    [e-mail]
>
> To subscribe or unsubscribe via the World Wide Web, visit
>    http://www.linuxbios.org/mailman/listinfo/linuxbios
> or, via email, send a message with subject or body 'help' to
>    [e-mail]
>
> You can reach the person managing the list at
>    [e-mail]
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of linuxbios digest..."
>
> Today's Topics:
> Re: Flashing with flashrom ok but no debug on com port
> (Stefan Reinauer)
> Re: dmidecode, lspci (-n, -v, -t) (Stefan Reinauer)
> Re: Getting Friendly with Flashrom (Carl-Daniel Hailfinger)
> Re: Flashing with flashrom ok but no debug on com port
> ([e-mail])
> cookie:Re: linuxbios Digest, Vol 25, Issue 91
> (C.-Valentin Schmitt)
>
> Message: 1
> Date: Thu, 22 Mar 2007 14:12:04 +0100
> From: Stefan Reinauer 
> Subject: Re: [LinuxBIOS] Flashing with flashrom ok but no debug on com
>    port
> To: [e-mail]
> Cc: [e-mail]
> Message-ID: 
> Content-Type: text/plain; charset=utf-8
> [e-mail]  [070322 11:20]:
> > Hi all,
> >
> > I have successfully flash LinuxBIOS on my chip SST39SF020A with flashrom,
> > when I reboot my card, I have no visual response, after that I use an Null
> > modem db9 wire between my card with LinuxBios et my computer. I have use
> > Hyperterminal with parameter 115200 baud, 8bit, no parity, 1 bit stop, and
> > after reboot my card, I have nothing ...
> >
> > I don't know why, in my config file I have set normally the good line for
> > active the com port in debug mode, but if somebody know all of the
> > modification for check if it's ok, it's welcome ;).
> >
> > thanks by advance for your help.
> >
> > regards
> >
> > Ccases
> >
> > PS : my card is an advantech pcm-5823
>
> It's a geode gx1?
>
> This looks like you did not initialize the SuperIO correctly.
>
> What SuperIO do you have on the board?
>
> Message: 2
> Date: Thu, 22 Mar 2007 14:14:19 +0100
> From: Stefan Reinauer 
> Subject: Re: [LinuxBIOS] dmidecode, lspci (-n, -v, -t)
> To: jag jag 
> Cc: [e-mail]
> Message-ID: 
> Content-Type: text/plain; charset=utf-8
> jag jag  [070322 13:57]:
> > BIOS ROM is socketed
>
> good.
> > Handle 0x0002, DMI type 2, 8 bytes
> > Base Board Information
> >    Manufacturer: ASUSTeK Computer Inc.
> >    Product Name: P4C800
> >    Version: Rev 1.xx
> >    Serial Number: MB-1234567890
>
> Intel 875P Chipset is not supported (yet)
>
> Sorry.
>
> Message: 3
> Date: Thu, 22 Mar 2007 14:22:49 +0100
> From: Carl-Daniel Hailfinger 
> Subject: Re: [LinuxBIOS] Getting Friendly with Flashrom
> To: Stefan Reinauer 
> Cc: [e-mail]
> Message-ID: 
> Content-Type: text/plain; charset=UTF-8
>
> On 22.03.2007 10:56, Stefan Reinauer wrote:
> > The sequence to call these in-flash enablers is well-known. Uniflash is
> > using them and so knows how to flash every board without the need for
> > new code, as long as it knows the flash chips.
>
> Does Uniflash work on this board? If so, you can modify it to print out
> the addresses it would be calling (along with the parameters) and then
> call these addresses in vm86 under Linux. That should work.
> You can even dump the PCI config space before and after enabling and
> diff them.
>
> Regards,
> Carl-Daniel
> -- 
> http://www.hailfinger.org/
>
> Message: 4
> Date: Thu, 22 Mar 2007 14:26:11 +0100 (CET)
> From: [e-mail]
> Subject: Re: [LinuxBIOS] Flashing with flashrom ok but no debug on com
>    port
> To: "Stefan Reinauer" 
> Cc: [e-mail], [e-mail]
> Message-ID: 
> Content-Type: text/plain;charset=iso-8859-1
> > [e-mail]  [070322 11:20]:
> > > Hi all,
> > >
> > > I have successfully flash LinuxBIOS on my chip SST39SF020A with
> > > flashrom,
> > > when I reboot my card, I have no visual response, after that I use an
> > > Null
> > > modem db9 wire between my card with LinuxBios et my computer. I have use
> > > Hyperterminal with parameter 115200 baud, 8bit, no parity, 1 bit stop,
> > > and
> > > after reboot my card, I have nothing ...
> > >
> > > I don't know why, in my config file I have set normally the good line
> > > for
> > > active the com port in debug mode, but if somebody know all of the
> > > modification for check if it's ok, it's welcome ;).
> > >
> > > thanks by advance for your help.
> > >
> > > regards
> > >
> > > Ccases
> > >
> > > PS : my card is an advantech pcm-5823
> >
> > It's a geode gx1?
>
> Yes
> > This looks like you did not initialize the SuperIO correctly.
> >
> > What SuperIO do you have on the board?
>
> It's an Winbond W83977AF-F and I use the W83977TF on LinuxBios.
>
> thanks for your help
>
> regards
>
> Ccases
>
> Message: 5
> Date: Thu, 22 Mar 2007 15:05:41 +0100
> From: "C.-Valentin Schmitt" 
> Subject: [LinuxBIOS] cookie:Re: linuxbios Digest, Vol 25, Issue 91
> To: [e-mail]
> Message-ID: 
> Content-Type: text/plain; charset=iso-8859-15
>
> derbestepolizeihundderwelt?!
> keineahnung?!michaelcaineoderwas?!
> > -----Urspr?ngliche Nachricht-----
> > Von: [e-mail]
> > Gesendet: 22.03.07 14:24:20
> > An: [e-mail]
> > Betreff: linuxbios Digest, Vol 25, Issue 91
> > Send linuxbios mailing list submissions to
> >    [e-mail]
> >
> > To subscribe or unsubscribe via the World Wide Web, visit
> >    http://www.linuxbios.org/mailman/listinfo/linuxbios
> > or, via email, send a message with subject or body 'help' to
> >    [e-mail]
> >
> > You can reach the person managing the list at
> >    [e-mail]
> >
> > When replying, please edit your Subject line so it is more specific
> > than "Re: Contents of linuxbios digest..."
> >
> > Today's Topics:
> > dmidecode, lspci (-n, -v, -t) (jag jag)
> > Hope it'll help! (Daniel Romar)
> >
> > Message: 1
> > Date: Thu, 22 Mar 2007 13:57:23 +0100 (CET)
> > From: jag jag 
> > Subject: [LinuxBIOS] dmidecode, lspci (-n, -v, -t)
> > To: [e-mail]
> > Message-ID: 
> > Content-Type: text/plain; charset="iso-8859-1"
> >
> > _________________________________________________________
> > Flyger tiden iv?g? F?nga dagen med Yahoo! Mails inbyggda
> > kalender. Dessutom 250 MB gratis, virusscanning och antispam. F? den p?: http://se.mail.yahoo.com