Zheng Bao (zheng.bao@amd.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/2483
-gerrit
commit 61f0d1cf8c817c587df52f17c77be02a4684db90 Author: Zheng Bao fishbaozi@gmail.com Date: Tue Feb 26 16:20:11 2013 +0800
documentation: Complete the AMD-S3.txt
Fix some typos and finish empty sections.
Change-Id: I08cc971e763252b035ab8ed2118180140e34ac72 Signed-off-by: Zheng Bao zheng.bao@amd.com Signed-off-by: Zheng Bao fishbaozi@gmail.com --- documentation/AMD-S3.txt | 33 +++++++++++++++++++++++++++------ 1 file changed, 27 insertions(+), 6 deletions(-)
diff --git a/documentation/AMD-S3.txt b/documentation/AMD-S3.txt index 1ef87c0..14f444a 100644 --- a/documentation/AMD-S3.txt +++ b/documentation/AMD-S3.txt @@ -13,7 +13,7 @@ /_/ __| |_|_____/ |_____/ |____/
- S3 in Coreboot (V 1.1) + S3 in Coreboot (V 1.2) ---------------------------------------- Zheng Bao zheng.bao@amd.com @@ -22,7 +22,7 @@ Introduction ============ This document is about how the feature S3 is implemented on coreboot, -specificly on AMD platform. This topic deals with ACPI spec, hardware, +specifically on AMD platform. This topic deals with ACPI spec, hardware, BIOS, OS. We try to help coreboot users to realize their own S3.
S3 in a nutshell @@ -103,20 +103,41 @@ Lifecycle of booting, sleeping and waking Coreboot and Ubuntu ============================================================= 1. Cold boot. For a system with S3 feature, the BIOS needs to save some data to -non-volitile storage at cold boot stage. What data need to be save are +non-volatile storage at cold boot stage. What data need to be save are provided by AmdS3Save. After the wrapper calls the AmdS3Save, it gets the VolatileStorage and NvStorage, which are where the data are located. It is the wrappers's responsibility to save the data.[3][4] -Currently, the wrappers allocate a CBFS modules in BIOS image. Todo +Currently, the wrappers allocate a CBFS modules in BIOS image. To do that, the wrapper needs to have the ability to write flash chips. It is not as comprehensive as flashrom. But for the SST chip on Parmer, MX chip on Thather, coreboot works well.[5]
2. OS goes in S3. - -3. BIOS detect S3 wakeup +For Linux, besides the kernel needs to do some saving, most distributions +run some scripts. For Ubuntu, scripts are located at /usr/lib/pm-utils/sleep.d. + # ls /usr/lib/pm-utils/sleep.d + 000kernel-change 49bluetooth 90clock 95led + 00logging 55NetworkManager 94cpufreq 98video-quirk-db-handler + 00powersave 60_wpa_supplicant 95anacron 99video + 01PulseAudio 75modules 95hdparm-apm +The script with lower prefix runs before the one with higher prefix. +99video is the last one. + +3. Firmware detects S3 wakeup +As we mentioned, Firmware detects the SLP_TYPx to find out if the board +wakes up. In romstage.c, AmdInitReset and AmdInitEarly are called +as they are during cold boot. AmdInitResume and AmdS3LateRestore are +called only during resume. For whole ramstage, Coreboot goes through +almost the same way as cold boot, other than not calling the AmdInitMid, +AmdInitLate and AmdS3Save, and restoring all the MTRRs. +At last step of coreboot stage, coreboot finds out the wakeup vector in FADT, +written by OS, and jump.
4. OS resumes. +When Linux resume, all the sleeping scripts continues. If we are more lucky, +all the scripts can go through. More chances that the 99video hangs or fails +to get the display back. Sometimes it can fixed if CONFIG_S3_VGA_ROM_RUN is +unset in Coreboot/Kconfig. That needs more troubleshooting.
Reference
-
Zheng Bao