[PATCH] fix Tyan s2881 boot (Kconfig)

[Ward Vandewege]

This fixes breakage introduced in r5051.

Thanks,
Ward.

[Stefan Reinauer]

On 2/3/10 6:50 PM, Ward Vandewege wrote:
> This fixes breakage introduced in r5051.
>
> Thanks,
> Ward.

Sorry for the inconvenience.

Acked-by: Stefan Reinauer

[Ward Vandewege]

On Wed, Feb 03, 2010 at 06:52:57PM +0100, Stefan Reinauer wrote:
> On 2/3/10 6:50 PM, Ward Vandewege wrote:
> > This fixes breakage introduced in r5051.
> >
> > Thanks,
> > Ward.
>
> Sorry for the inconvenience.
>
> Acked-by: Stefan Reinauer

No worries - fixed in r5083 for both newconfig and Kconfig.

Thanks,
Ward.

[Patrick Georgi]

Am 03.02.2010 18:50, schrieb Ward Vandewege:
> This fixes breakage introduced in r5051.

Sorry for that. I assumed newconfig would be fine:

(Options.lb)
#make the SB HT chain on bus 0, default is not (0)
default CONFIG_SB_HT_CHAIN_ON_BUS0=0

If you want to change that in newconfig, too, consider both your patch
and that change to be
Acked-by: Patrick Georgi

[Ward Vandewege]

On Wed, Feb 03, 2010 at 07:00:25PM +0100, Patrick Georgi wrote:
> Am 03.02.2010 18:50, schrieb Ward Vandewege:
> > This fixes breakage introduced in r5051.
>
> Sorry for that. I assumed newconfig would be fine:
>
> (Options.lb)
> #make the SB HT chain on bus 0, default is not (0)
> default CONFIG_SB_HT_CHAIN_ON_BUS0=0
>
> If you want to change that in newconfig, too, consider both your patch
> and that change to be
> Acked-by: Patrick Georgi

I fixed both after boot-verifying that newconfig needed the same fix. Thanks!

Thanks,
Ward.