Re: [coreboot] [PATCH] artecgroup/dbe61: Set up 4MB mode for LPC dongle

[Mart Raudsepp]

> Unless someone has a huge problem with this (I don't)
>
> Acked-by: Ronald G. Minnich
>
> so you're booting? Do we have your RAM setup commit?

I didn't do anything to it. It just worked as it was, just had to get
video memory set up to get coreinfo going instead of "q-funk: like what a
nice C4 game with heavy pixelation might appear" :)

I don't quite remember what was wrong in my testings before. I just
updated to HEAD, compiled and it worked as shown at
http://www.pastebin.ca/1031398
Maybe it all worked before, and I was too sleepy to notice the last time
around?
To be sure, I'd have to go look around IRC logs from that day, but it's
getting late.

Regarding WinCE, I just remembered 8MB wasn't enough for some tests on
DBE62, so I just went straight 16MB for DBE61, instead of having to later
have to up it to 16MB. DBE62 could use upping that from 8MB to 16MB too,
but maybe by the time that will be necessary in practice, someone
(possibly me) has cooked up a Kconfig patch instead.

Regards,
Mart Raudsepp

[PATCH] artecgroup/dbe61: Set up 4MB mode for LPC dongle

[ron minnich]

On Tue, May 27, 2008 at 5:41 PM, Mart Raudsepp
 wrote:
> I don't quite remember what was wrong in my testings before. I just
> updated to HEAD, compiled and it worked as shown at
> http://www.pastebin.ca/1031398

it's got the alix1c memory settings in it from my port :-)
The files from alix1c are the same.

I have no grafix from dbe62 at present. Don't know why.

ron