Author: myles Date: Mon Sep 13 16:51:26 2010 New Revision: 5809 URL: https://tracker.coreboot.org/trac/coreboot/changeset/5809
Log: Add support for Asus M4A785-M.
Signed-off-by: Juhana Helovuo juhe@iki.fi Acked-by: Myles Watson mylesgw@gmail.com
Added: trunk/src/mainboard/asus/m4a785-m/ - copied from r5792, trunk/src/mainboard/amd/tilapia_fam10/ Replaced: trunk/src/mainboard/asus/m4a785-m/Kconfig - copied, changed from r5800, trunk/src/mainboard/amd/tilapia_fam10/Kconfig Modified: trunk/src/mainboard/asus/Kconfig trunk/src/mainboard/asus/m4a785-m/devicetree.cb trunk/src/mainboard/asus/m4a785-m/irq_tables.c trunk/src/mainboard/asus/m4a785-m/mainboard.c trunk/src/mainboard/asus/m4a785-m/romstage.c
Modified: trunk/src/mainboard/asus/Kconfig ============================================================================== --- trunk/src/mainboard/asus/Kconfig Mon Sep 13 16:50:20 2010 (r5808) +++ trunk/src/mainboard/asus/Kconfig Mon Sep 13 16:51:26 2010 (r5809) @@ -27,6 +27,8 @@ bool "A8V-E SE" config BOARD_ASUS_M2V_MX_SE bool "M2V-MX SE" +config BOARD_ASUS_M4A785M + bool "M4A785-M" config BOARD_ASUS_MEW_AM bool "MEW-AM" config BOARD_ASUS_MEW_VM @@ -49,6 +51,7 @@ source "src/mainboard/asus/a8n_e/Kconfig" source "src/mainboard/asus/a8v-e_se/Kconfig" source "src/mainboard/asus/m2v-mx_se/Kconfig" +source "src/mainboard/asus/m4a785-m/Kconfig" source "src/mainboard/asus/mew-am/Kconfig" source "src/mainboard/asus/mew-vm/Kconfig" source "src/mainboard/asus/p2b/Kconfig"
Copied and modified: trunk/src/mainboard/asus/m4a785-m/Kconfig (from r5800, trunk/src/mainboard/amd/tilapia_fam10/Kconfig) ============================================================================== --- trunk/src/mainboard/amd/tilapia_fam10/Kconfig Fri Sep 10 20:33:24 2010 (r5800, copy source) +++ trunk/src/mainboard/asus/m4a785-m/Kconfig Mon Sep 13 16:51:26 2010 (r5809) @@ -1,21 +1,20 @@ -if BOARD_AMD_TILAPIA_FAM10 +if BOARD_ASUS_M4A785M
config BOARD_SPECIFIC_OPTIONS # dummy def_bool y select ARCH_X86 select CPU_AMD_SOCKET_AM3 - select DIMM_DDR3 - select DIMM_REGISTERED + select DIMM_DDR2 select NORTHBRIDGE_AMD_AMDFAM10 select SOUTHBRIDGE_AMD_RS780 select SOUTHBRIDGE_AMD_SB700 - select SUPERIO_ITE_IT8718F + select SOUTHBRIDGE_AMD_SB700_SKIP_ISA_DMA_INIT + select SUPERIO_ITE_IT8712F select BOARD_HAS_FADT select HAVE_BUS_CONFIG select HAVE_OPTION_TABLE select GENERATE_PIRQ_TABLE select GENERATE_MP_TABLE - select HAVE_MAINBOARD_RESOURCES select CACHE_AS_RAM select HAVE_HARD_RESET select SB_HT_CHAIN_UNITID_OFFSET_ONLY @@ -30,7 +29,7 @@
config MAINBOARD_DIR string - default amd/tilapia_fam10 + default asus/m4a785-m
config APIC_ID_OFFSET hex @@ -38,7 +37,7 @@
config MAINBOARD_PART_NUMBER string - default "Tilapia (Fam10)" + default "M4A785-M"
config HW_MEM_HOLE_SIZEK hex @@ -74,7 +73,7 @@
config IRQ_SLOT_COUNT int - default 11 + default 19
config AMD_UCODE_PATCH_FILE string @@ -94,11 +93,11 @@
config MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID hex - default 0x3060 + default 0x83a2
config MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID hex - default 0x1022 + default 0x1043
config RAMBASE hex @@ -108,4 +107,4 @@ hex default 0
-endif # BOARD_AMD_TILAPIA_FAM10 +endif
Modified: trunk/src/mainboard/asus/m4a785-m/devicetree.cb ============================================================================== --- trunk/src/mainboard/amd/tilapia_fam10/devicetree.cb Thu Sep 9 12:35:52 2010 (r5792) +++ trunk/src/mainboard/asus/m4a785-m/devicetree.cb Mon Sep 13 16:51:26 2010 (r5809) @@ -1,7 +1,6 @@ -# sample config for amd/tilapia_fam10 chip northbridge/amd/amdfam10/root_complex device lapic_cluster 0 on - chip cpu/amd/socket_AM3 #L1 and DDR3 + chip cpu/amd/socket_AM3 #L1 and DDR2 device lapic 0 on end end end @@ -11,15 +10,15 @@ chip southbridge/amd/rs780 device pci 0.0 on end # HT 0x9600 device pci 1.0 on end # Internal Graphics P2P bridge 0x9602 - device pci 2.0 on end # PCIE P2P bridge (external graphics) 0x9603 - device pci 3.0 on end # PCIE P2P bridge 0x960b - device pci 4.0 on end # PCIE P2P bridge 0x9604 + device pci 2.0 off end # PCIE P2P bridge (external graphics) 0x9603 + device pci 3.0 off end # PCIE P2P bridge 0x960b + device pci 4.0 off end # PCIE P2P bridge 0x9604 device pci 5.0 off end # PCIE P2P bridge 0x9605 device pci 6.0 off end # PCIE P2P bridge 0x9606 device pci 7.0 off end # PCIE P2P bridge 0x9607 device pci 8.0 off end # NB/SB Link P2P bridge - device pci 9.0 on end # - device pci a.0 on end # + device pci 9.0 off end # + device pci a.0 on end # bridge to RTL8111/8168B PCI Express Gigabit Ethernet register "gppsb_configuration" = "1" # Configuration B register "gpp_configuration" = "3" # Configuration D default register "port_enable" = "0x6fc" @@ -57,12 +56,8 @@ device pci 14.1 on end # IDE 0x439c device pci 14.2 on end # HDA 0x4383 device pci 14.3 on # LPC 0x439d - chip superio/ite/it8718f - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end + chip superio/ite/it8712f + device pnp 2e.0 off end # Floppy device pnp 2e.1 on # Com1 io 0x60 = 0x3f8 irq 0x70 = 4 @@ -75,7 +70,7 @@ io 0x60 = 0x378 irq 0x70 = 7 end - device pnp 2e.4 off end # EC + device pnp 2e.4 off end # Environment Controller device pnp 2e.5 on # Keyboard io 0x60 = 0x60 io 0x62 = 0x64 @@ -87,16 +82,13 @@ device pnp 2e.7 off # GPIO, must be closed for unresolved reason. end device pnp 2e.8 off # MIDI - io 0x60 = 0x300 - irq 0x70 = 9 end device pnp 2e.9 off # GAME - io 0x60 = 0x220 end device pnp 2e.a off end # CIR - end #superio/ite/it8718f + end #superio end #LPC - device pci 14.4 on end # PCI 0x4384 + device pci 14.4 on end # PCI to PCI Bridge [1002:4384] device pci 14.5 on end # USB 2 register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE end #southbridge/amd/sb700 @@ -108,35 +100,6 @@ device pci 18.2 on end device pci 18.3 on end device pci 18.4 on end -# device pci 00.5 on end - end + end # chip northbridge end #pci_domain - #for node 32 to node 63 -# device pci_domain 0 on -# chip northbridge/amd/amdfam10 -# device pci 00.0 on end# northbridge -# device pci 00.0 on end -# device pci 00.0 on end -# device pci 00.0 on end -# device pci 00.1 on end -# device pci 00.2 on end -# device pci 00.3 on end -# device pci 00.4 on end -# device pci 00.5 on end -# end -# end #pci_domain - -# chip drivers/generic/debug -# device pnp 0.0 off end # chip name -# device pnp 0.1 on end # pci_regs_all -# device pnp 0.2 off end # mem -# device pnp 0.3 off end # cpuid -# device pnp 0.4 off end # smbus_regs_all -# device pnp 0.5 off end # dual core msr -# device pnp 0.6 off end # cache size -# device pnp 0.7 off end # tsc -# device pnp 0.8 off end # hard reset -# device pnp 0.9 off end # mcp55 -# device pnp 0.a on end # GH ext table -# end -end +end # northbridge/amd/amdfam10/root_complex
Modified: trunk/src/mainboard/asus/m4a785-m/irq_tables.c ============================================================================== --- trunk/src/mainboard/amd/tilapia_fam10/irq_tables.c Thu Sep 9 12:35:52 2010 (r5792) +++ trunk/src/mainboard/asus/m4a785-m/irq_tables.c Mon Sep 13 16:51:26 2010 (r5809) @@ -1,11 +1,12 @@ /* * This file is part of the coreboot project. * - * Copyright (C) 2010 Advanced Micro Devices, Inc. + * Copyright (C) 200x TODO TODO@TODO * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of @@ -17,97 +18,48 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */
-#include <console/console.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> #include <arch/pirq_routing.h>
-#include <cpu/amd/amdfam10_sysconf.h> - - - -static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, - u8 link0, u16 bitmap0, u8 link1, u16 bitmap1, - u8 link2, u16 bitmap2, u8 link3, u16 bitmap3, - u8 slot, u8 rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} -extern u8 bus_isa; -extern u8 bus_rs780[8]; -extern u8 bus_sb700[2]; -extern unsigned long sbdn_sb700; +const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, /* u32 signature */ + PIRQ_VERSION, /* u16 version */ + 32 + 16 * 19, /* Max. number of devices on the bus */ + 0x00, /* Interrupt router bus */ + (0x14 << 3) | 0x3, /* Interrupt router dev */ + 0, /* IRQs devoted exclusively to PCI usage */ + 0x1002, /* Vendor */ + 0x439d, /* Device */ + 0, /* Miniport */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ + 0x8, /* Checksum (has to be set to some value that + * would give 0 after the sum of all bytes + * for this structure (including checksum). + */ + { + /* bus, dev | fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ + {0x01, (0x05 << 3) | 0x0, {{0x03, 0xdc90}, {0x04, 0xdc90}, {0x01, 0xdc90}, {0x02, 0xdc90}}, 0x0, 0x0}, + {0x00, (0x02 << 3) | 0x0, {{0x03, 0xdc90}, {0x04, 0xdc90}, {0x01, 0xdc90}, {0x02, 0xdc90}}, 0x0, 0x0}, + {0x00, (0x03 << 3) | 0x0, {{0x04, 0xdc90}, {0x01, 0xdc90}, {0x02, 0xdc90}, {0x03, 0xdc90}}, 0x0, 0x0}, + {0x00, (0x04 << 3) | 0x0, {{0x01, 0xdc90}, {0x02, 0xdc90}, {0x03, 0xdc90}, {0x04, 0xdc90}}, 0x0, 0x0}, + {0x00, (0x05 << 3) | 0x0, {{0x02, 0xdc90}, {0x03, 0xdc90}, {0x04, 0xdc90}, {0x01, 0xdc90}}, 0x0, 0x0}, + {0x00, (0x06 << 3) | 0x0, {{0x03, 0xdc90}, {0x04, 0xdc90}, {0x01, 0xdc90}, {0x02, 0xdc90}}, 0x0, 0x0}, + {0x00, (0x07 << 3) | 0x0, {{0x04, 0xdc90}, {0x01, 0xdc90}, {0x02, 0xdc90}, {0x03, 0xdc90}}, 0x0, 0x0}, + {0x00, (0x09 << 3) | 0x0, {{0x02, 0xdc90}, {0x03, 0xdc90}, {0x04, 0xdc90}, {0x01, 0xdc90}}, 0x0, 0x0}, + {0x00, (0x0a << 3) | 0x0, {{0x03, 0xdc90}, {0x04, 0xdc90}, {0x01, 0xdc90}, {0x02, 0xdc90}}, 0x0, 0x0}, + {0x02, (0x00 << 3) | 0x0, {{0x03, 0xdc90}, {0x04, 0xdc90}, {0x01, 0xdc90}, {0x02, 0xdc90}}, 0xa, 0x0}, + {0x00, (0x0b << 3) | 0x0, {{0x04, 0xdc90}, {0x01, 0xdc90}, {0x02, 0xdc90}, {0x03, 0xdc90}}, 0x0, 0x0}, + {0x00, (0x0c << 3) | 0x0, {{0x01, 0xdc90}, {0x02, 0xdc90}, {0x03, 0xdc90}, {0x04, 0xdc90}}, 0x0, 0x0}, + {0x00, (0x14 << 3) | 0x0, {{0x01, 0xdc90}, {0x02, 0xdc90}, {0x03, 0xdc90}, {0x04, 0xdc90}}, 0x0, 0x0}, + {0x00, (0x12 << 3) | 0x0, {{0x01, 0xdc90}, {0x02, 0xdc90}, {0x03, 0xdc90}, {0x04, 0xdc90}}, 0x0, 0x0}, + {0x00, (0x13 << 3) | 0x0, {{0x03, 0xdc90}, {0x04, 0xdc90}, {0x01, 0xdc90}, {0x02, 0xdc90}}, 0x0, 0x0}, + {0x00, (0x11 << 3) | 0x0, {{0x0c, 0xdc90}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x0000}}, 0x0, 0x0}, + {0x0a, (0x00 << 3) | 0x0, {{0x03, 0xdc90}, {0x04, 0xdc90}, {0x01, 0xdc90}, {0x02, 0xdc90}}, 0x0, 0x0}, + {0x03, (0x05 << 3) | 0x0, {{0x0a, 0xdc90}, {0x0b, 0xdc90}, {0x0c, 0xdc90}, {0x0d, 0xdc90}}, 0xc, 0x0}, + {0x03, (0x06 << 3) | 0x0, {{0x0b, 0xdc90}, {0x0c, 0xdc90}, {0x0d, 0xdc90}, {0x0a, 0xdc90}}, 0xd, 0x0}, + } +};
unsigned long write_pirq_routing_table(unsigned long addr) { - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - u32 slot_num; - u8 *v; - - u8 sum = 0; - int i; - - get_bus_conf(); /* it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c */ - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be betweeen 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (u8 *) (addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = bus_sb700[0]; - pirq->rtr_devfn = ((sbdn_sb700 + 0x14) << 3) | 4; - - pirq->exclusive_irqs = 0; - - pirq->rtr_vendor = 0x1002; - pirq->rtr_device = 0x4384; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *)(&pirq->checksum + 1); - slot_num = 0; - - /* pci bridge */ - write_pirq_info(pirq_info, bus_sb700[0], ((sbdn_sb700 + 0x14) << 3) | 4, - 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, - 0); - pirq_info++; - slot_num++; - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - printk(BIOS_INFO, "write_pirq_routing_table done.\n"); - - return (unsigned long)pirq_info; + return copy_pirq_routing_table(addr); }
Modified: trunk/src/mainboard/asus/m4a785-m/mainboard.c ============================================================================== --- trunk/src/mainboard/amd/tilapia_fam10/mainboard.c Thu Sep 9 12:35:52 2010 (r5792) +++ trunk/src/mainboard/asus/m4a785-m/mainboard.c Mon Sep 13 16:51:26 2010 (r5809) @@ -21,7 +21,6 @@ #include <device/device.h> #include <device/pci.h> #include <arch/io.h> -#include <boot/tables.h> #include <cpu/x86/msr.h> #include <cpu/amd/mtrr.h> #include <device/pci_def.h> @@ -132,6 +131,8 @@
/* * justify the dev3 is exist or not + * NOTE: This just copied from AMD Tilapia code. + * It is completly unknown it it will work at all for Asus M4A785-A */ u8 is_dev3_present(void) { @@ -158,62 +159,6 @@ } }
- -/* - * set gpio40 gfx - */ -static void set_gpio40_gfx(void) -{ - u8 byte; - u32 dword; - device_t sm_dev; - /* disable the GPIO40 as CLKREQ2# function */ - byte = pm_ioread(0xd3); - byte &= ~(1 << 7); - pm_iowrite(0xd3, byte); - - /* disable the GPIO40 as CLKREQ3# function */ - byte = pm_ioread(0xd4); - byte &= ~(1 << 0); - pm_iowrite(0xd4, byte); - - /* enable pull up for GPIO68 */ - byte = pm2_ioread(0xf1); - byte &= ~(1 << 4); - pm2_iowrite(0xf1, byte); - - /* access the smbus extended register */ - sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); - - /*if the dev3 is present, set the gfx to 2x8 lanes*/ - /*otherwise set the gfx to 1x16 lanes*/ - if(is_dev3_present()){ - - printk(BIOS_INFO, "Dev3 is present. GFX Configuration is Two x8 slots\n"); - /* when the gpio40 is configured as GPIO, this will enable the output */ - pci_write_config32(sm_dev, 0xf8, 0x4); - dword = pci_read_config32(sm_dev, 0xfc); - dword &= ~(1 << 10); - - /* When the gpio40 is configured as GPIO, this will represent the output value*/ - /* 1 :enable two x8 , 0 : master slot enable only */ - dword |= (1 << 26); - pci_write_config32(sm_dev, 0xfc, dword); - - }else{ - printk(BIOS_INFO, "Dev3 is not present. GFX Configuration is One x16 slot\n"); - /* when the gpio40 is configured as GPIO, this will enable the output */ - pci_write_config32(sm_dev, 0xf8, 0x4); - dword = pci_read_config32(sm_dev, 0xfc); - dword &= ~(1 << 10); - - /* When the gpio40 is configured as GPIO, this will represent the output value*/ - /* 1 :enable two x8 , 0 : master slot enable only */ - dword &= ~(1 << 26); - pci_write_config32(sm_dev, 0xfc, dword); - } -} - /* * set thermal config */ @@ -279,12 +224,12 @@ }
/************************************************* -* enable the dedicated function in tilapia board. +* enable the dedicated function in m4a785m board. * This function called early than rs780_enable. *************************************************/ -static void tilapia_enable(device_t dev) +static void m4a785m_enable(device_t dev) { - printk(BIOS_INFO, "Mainboard TILAPIA Enable. dev=0x%p\n", dev); + printk(BIOS_INFO, "Mainboard M4A785M Enable. dev=0x%p\n", dev);
#if (CONFIG_GFXUMA == 1) msr_t msr, msr2; @@ -328,24 +273,9 @@ set_pcie_dereset(); /* get_ide_dma66(); */ set_thermal_config(); - set_gpio40_gfx(); -} - -int add_mainboard_resources(struct lb_memory *mem) -{ - /* UMA is removed from system memory in the northbridge code, but - * in some circumstances we want the memory mentioned as reserved. - */ -#if (CONFIG_GFXUMA == 1) - printk(BIOS_INFO, "uma_memory_start=0x%llx, uma_memory_size=0x%llx \n", - uma_memory_base, uma_memory_size); - lb_add_memory_range(mem, LB_MEM_RESERVED, uma_memory_base, - uma_memory_size); -#endif - return 0; }
struct chip_operations mainboard_ops = { - CHIP_NAME("AMD TILAPIA Mainboard") - .enable_dev = tilapia_enable, + CHIP_NAME("AMD M4A785M Mainboard") + .enable_dev = m4a785m_enable, };
Modified: trunk/src/mainboard/asus/m4a785-m/romstage.c ============================================================================== --- trunk/src/mainboard/amd/tilapia_fam10/romstage.c Thu Sep 9 12:35:52 2010 (r5792) +++ trunk/src/mainboard/asus/m4a785-m/romstage.c Mon Sep 13 16:51:26 2010 (r5809) @@ -59,7 +59,7 @@
static int smbus_read_byte(u32 device, u32 address);
-#include "superio/ite/it8718f/it8718f_early_serial.c" +#include "superio/ite/it8712f/it8712f_early_serial.c" #include "cpu/x86/mtrr/earlymtrr.c" #include <cpu/amd/mtrr.h> #include "northbridge/amd/amdfam10/setup_resource_map.c" @@ -136,7 +136,8 @@ enable_rs780_dev8(); sb700_lpc_init();
- it8718f_enable_serial(0, CONFIG_TTYS0_BASE); + it8712f_enable_serial(0, CONFIG_TTYS0_BASE); + it8712f_kill_watchdog(); /* disable watchdog, so it does not reset while still booting */ uart_init(); console_init(); printk(BIOS_DEBUG, "\n");
-
repository service