This is completely off-topic for the LinuxBIOS mailing list.
On Thu, Mar 17, 2005 at 09:54:18AM -0600, DongWook Kim wrote:
I have a problem with activating the ethernet in my embedded linux. I am using realtek 8100c(It is one of the realteck's 8139 compatible NIC).
Our company designed a board and a some kind of system BIOS for our board. And after I installed a linux on the board with the BIOS and upload the firmware of the realtek 8100c into its rom.
The only ROM I see close to the 8100C is the EEPROM that contains configuration and MAC address. This should only have to be written to once.
[..]
Does my System BIOS need some kind of initialization on the realteck 8100c?
Besides normal PCI init required for all PCI devices I very much doubt that. But speak with your hardware department and your supplier. And check out the chip data sheet.
//Peter
-
Peter Stuge