[commit] r5714 - in trunk/src: mainboard/amd/mahogany mainboard/amd/mahogany_fam10 mainboard/amd/tilapia_fam10 mainboard/asrock/939a785gmh southbridge/amd/rs780

[repository service]

Author: stepan
Date: Tue Aug 17 13:11:09 2010
New Revision: 5714
URL: https://tracker.coreboot.org/trac/coreboot/changeset/5714

Log:
Tilapila supports both dual slot and single slot. The difference should be
detected by the existence of dev3. Some other RS780 mainboard has 
the same function. The patch added the function to make these boards work
smoothly.

Signed-off-by: Wang Qing Pei 
Acked-by: Zheng Bao

Modified:
   trunk/src/mainboard/amd/mahogany/mainboard.c
   trunk/src/mainboard/amd/mahogany_fam10/mainboard.c
   trunk/src/mainboard/amd/tilapia_fam10/mainboard.c
   trunk/src/mainboard/asrock/939a785gmh/mainboard.c
   trunk/src/southbridge/amd/rs780/rs780_gfx.c

Modified: trunk/src/mainboard/amd/mahogany/mainboard.c
==============================================================================
--- trunk/src/mainboard/amd/mahogany/mainboard.c	Tue Aug 17 13:08:31 2010	(r5713)
+++ trunk/src/mainboard/amd/mahogany/mainboard.c	Tue Aug 17 13:11:09 2010	(r5714)
@@ -34,7 +34,7 @@

void set_pcie_dereset(void);
 void set_pcie_reset(void);
-
+u8 is_dev3_present(void);
 /*
  * Mahogany uses GPIO 6 as PCIe slot reset, GPIO4 as GFX slot reset. We need to
  * pull it up before training the slot.
@@ -94,6 +94,10 @@
 }
 #endif	/* get_ide_dma66 */

+u8 is_dev3_present(void)
+{
+	return 0;
+}
 /*************************************************
 * enable the dedicated function in mahogany board.
 * This function called early than rs780_enable.

Modified: trunk/src/mainboard/amd/mahogany_fam10/mainboard.c
==============================================================================
--- trunk/src/mainboard/amd/mahogany_fam10/mainboard.c	Tue Aug 17 13:08:31 2010	(r5713)
+++ trunk/src/mainboard/amd/mahogany_fam10/mainboard.c	Tue Aug 17 13:11:09 2010	(r5714)
@@ -34,7 +34,7 @@

void set_pcie_dereset(void);
 void set_pcie_reset(void);
-
+u8 is_dev3_present(void);
 /*
  * Mahogany uses GPIO 6 as PCIe slot reset, GPIO4 as GFX slot reset. We need to
  * pull it up before training the slot.
@@ -94,6 +94,11 @@
 }
 #endif	/* get_ide_dma66() */

+u8 is_dev3_present(void)
+{
+	return 0;
+}
+
 /*************************************************
 * enable the dedicated function in mahogany board.
 * This function called early than rs780_enable.

Modified: trunk/src/mainboard/amd/tilapia_fam10/mainboard.c
==============================================================================
--- trunk/src/mainboard/amd/tilapia_fam10/mainboard.c	Tue Aug 17 13:08:31 2010	(r5713)
+++ trunk/src/mainboard/amd/tilapia_fam10/mainboard.c	Tue Aug 17 13:11:09 2010	(r5714)
@@ -48,6 +48,7 @@

void set_pcie_dereset(void);
 void set_pcie_reset(void);
+u8 is_dev3_present(void);

void set_pcie_dereset()
 {
@@ -130,6 +131,90 @@
 #endif

/*
+ * justify the dev3 is exist or not
+ */
+u8 is_dev3_present(void)
+{
+	u16 word;
+	device_t sm_dev;
+
+	/* access the smbus extended register */
+	sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0));
+
+	/* put the GPIO68 output to tristate */
+	word = pci_read_config16(sm_dev, 0x7e);
+	word |= 1 << 6;
+	pci_write_config16(sm_dev, 0x7e,word);
+
+	/* read the GPIO68 input status */
+	word = pci_read_config16(sm_dev, 0x7e);
+
+	if(word & (1 << 10)){
+		/*not exist*/
+		return 0;
+	}else{
+		/*exist*/
+		return 1;
+	}
+}
+
+
+/*
+ * set gpio40 gfx
+ */
+static void set_gpio40_gfx(void)
+{
+	u8 byte;
+	u32 dword;
+	device_t sm_dev;
+	/* disable the GPIO40 as CLKREQ2# function */
+	byte = pm_ioread(0xd3);
+	byte &= ~(1 << 7);
+	pm_iowrite(0xd3, byte);
+
+	/* disable the GPIO40 as CLKREQ3# function */
+	byte = pm_ioread(0xd4);
+	byte &= ~(1 << 0);
+	pm_iowrite(0xd4, byte);
+
+	/* enable pull up for GPIO68 */
+	byte = pm2_ioread(0xf1);
+	byte &=	~(1 << 4);
+	pm2_iowrite(0xf1, byte);
+
+	/* access the smbus extended register */
+	sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0));
+
+	/*if the dev3 is present, set the gfx to 2x8 lanes*/
+	/*otherwise set the gfx to 1x16 lanes*/
+	if(is_dev3_present()){
+
+		printk(BIOS_INFO, "Dev3 is present. GFX Configuration is Two x8 slots\n");
+		/* when the gpio40 is configured as GPIO, this will enable the output */
+		pci_write_config32(sm_dev, 0xf8, 0x4);
+		dword = pci_read_config32(sm_dev, 0xfc);
+		dword &= ~(1 << 10);
+
+	        /* When the gpio40 is configured as GPIO, this will represent the output value*/
+		/* 1 :enable two x8  , 0 : master slot enable only */
+		dword |= (1 << 26);
+		pci_write_config32(sm_dev, 0xfc, dword);
+
+	}else{
+		printk(BIOS_INFO, "Dev3 is not present. GFX Configuration is One x16 slot\n");
+		/* when the gpio40 is configured as GPIO, this will enable the output */
+		pci_write_config32(sm_dev, 0xf8, 0x4);
+		dword = pci_read_config32(sm_dev, 0xfc);
+		dword &= ~(1 << 10);
+
+        	/* When the gpio40 is configured as GPIO, this will represent the output value*/
+		/* 1 :enable two x8  , 0 : master slot enable only */
+		dword &=  ~(1 << 26);
+		pci_write_config32(sm_dev, 0xfc, dword);
+	}
+}
+
+/*
  * set thermal config
  */
 static void set_thermal_config(void)
@@ -247,6 +332,7 @@
    set_pcie_dereset();
    /* get_ide_dma66(); */
    set_thermal_config();
+	set_gpio40_gfx();
 }

int add_mainboard_resources(struct lb_memory *mem)

Modified: trunk/src/mainboard/asrock/939a785gmh/mainboard.c
==============================================================================
--- trunk/src/mainboard/asrock/939a785gmh/mainboard.c	Tue Aug 17 13:08:31 2010	(r5713)
+++ trunk/src/mainboard/asrock/939a785gmh/mainboard.c	Tue Aug 17 13:11:09 2010	(r5714)
@@ -34,7 +34,7 @@

void set_pcie_dereset(void);
 void set_pcie_reset(void);
-
+u8 is_dev3_present(void);
 /*
  * Mahogany uses GPIO 6 as PCIe slot reset, GPIO4 as GFX slot reset. We need to
  * pull it up before training the slot.
@@ -94,6 +94,11 @@
 }
 #endif	/* get_ide_dma66 */

+u8 is_dev3_present(void)
+{
+	return 0;
+}
+
 /*************************************************
 * enable the dedicated function in mahogany board.
 * This function called early than rs780_enable.

Modified: trunk/src/southbridge/amd/rs780/rs780_gfx.c
==============================================================================
--- trunk/src/southbridge/amd/rs780/rs780_gfx.c	Tue Aug 17 13:08:31 2010	(r5713)
+++ trunk/src/southbridge/amd/rs780/rs780_gfx.c	Tue Aug 17 13:11:09 2010	(r5714)
@@ -35,7 +35,7 @@
 #include <delay.h>
 #include <cpu/x86/msr.h>
 #include "rs780.h"
-
+extern int is_dev3_present(void);
 void set_pcie_reset(void);
 void set_pcie_dereset(void);

@@ -1214,6 +1214,40 @@
    	printk(BIOS_DEBUG, "device = %x\n", dev->path.pci.devfn >> 3);
    	dual_port_configuration(nb_dev, dev);
    	break;
+
+	case 2:
+
+		if(is_dev3_present()){
+			/* step 1, lane reversal (only need if CMOS option is enabled) */
+			if (cfg->gfx_lane_reversal) {
+				set_nbmisc_enable_bits(nb_dev, 0x33, 1 << 2, 1 << 2);
+				set_nbmisc_enable_bits(nb_dev, 0x33, 1 << 3, 1 << 3);
+			}
+			printk(BIOS_DEBUG, "rs780_gfx_init step1.\n");
+			/* step 1.1, dual-slot gfx configuration (only need if CMOS option is enabled) */
+			/* AMD calls the configuration CrossFire */
+			set_nbmisc_enable_bits(nb_dev, 0x0, 0xf << 8, 5 << 8);
+			printk(BIOS_DEBUG, "rs780_gfx_init step2.\n");
+
+
+			printk(BIOS_DEBUG, "device = %x\n", dev->path.pci.devfn >> 3);
+			dual_port_configuration(nb_dev, dev);
+
+		}else{
+			if (cfg->gfx_lane_reversal) {
+				set_nbmisc_enable_bits(nb_dev, 0x33, 1 << 2, 1 << 2);
+			}
+			printk(BIOS_DEBUG, "rs780_gfx_init step1.\n");
+			printk(BIOS_DEBUG, "rs780_gfx_init step2.\n");
+
+			if((dev->path.pci.devfn >> 3) == 2)
+				single_port_configuration(nb_dev, dev);
+			else{
+				set_nbmisc_enable_bits(nb_dev, 0xc, 0, 0x2 << 2); /* hide the GFX bridge. */
+				printk(BIOS_DEBUG, "If dev3.., single port. Do nothing.\n");
+			    }
+		}
+
    default:
    	printk(BIOS_INFO, "Incorrect configuration of external GFX slot.\n");
    	break;