Hi, I bought the HP 5103 netbook. I was wondering if coreboot would run on it. It has the following specs:
Here are the quick specs (the more detailed specs are at the bottom):
CPU: Intel Atom N550 with an integrated northbridge Southbridge: Intel N10/ICH 7 SuperIO: SMSC FDC37B72x
So on your motherboard page, the closest motherboard I could find is the Intel D945GCLF. So I found the Kconfig file and thought a good way to start would be to modify it. It has: select CPU_INTEL_SOCKET_441 select NORTHBRIDGE_INTEL_I945GC select SOUTHBRIDGE_INTEL_I82801GX select SUPERIO_SMSC_LPC47M15X
Should I start by modifying these four lines? Then compile and flash?
The socket for the N550 is the Intel Socket 437. Does coreboot support that?
The other question I had was about the northbridge. Since its integrated into the CPU, should I remove that line? Or can I keep it in?
Thanks for your help! Joseph
Per the FAQ, here's lspci -tvnn: -[0000:00]-+-00.0 Intel Corporation N10 Family DMI Bridge [8086:a010] +-02.0 Intel Corporation N10 Family Integrated Graphics Controller [8086:a011] +-02.1 Intel Corporation N10 Family Integrated Graphics Controller [8086:a012] +-1b.0 Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] +-1c.0-[0000:01]----00.0 Broadcom Corporation Device [14e4:4727] +-1c.3-[0000:02]----00.0 Marvell Technology Group Ltd. Device [11ab:4381] +-1d.0 Intel Corporation N10/ICH7 Family USB UHCI Controller #1 [8086:27c8] +-1d.1 Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] +-1d.2 Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] +-1d.3 Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] +-1d.7 Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] +-1e.0-[0000:03]-- +-1f.0 Intel Corporation NM10 Family LPC Controller [8086:27bc] -1f.2 Intel Corporation N10/ICH7 Family SATA AHCI Controller [8086:27c1]
Here's superiotool -dV: Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x2e... Found SMSC FDC37B72x (id=0x4c, rev=0x01) at 0x2e Register dump: idx 03 20 21 22 23 24 26 27 28 2b 2c 2d 2e 2f val 00 4c 01 10 00 04 2e 00 00 00 00 00 00 00 def 03 4c 00 00 00 04 MM MM 00 NA NA NA NA NA LDN 0x00 (Floppy) idx 30 60 61 70 74 f0 f1 f2 f4 f5 val 00 00 00 00 00 00 00 00 00 00 def 00 03 f0 06 02 0e 00 ff 00 00 LDN 0x03 (Parallel port) idx 30 60 61 70 74 f0 f1 val 00 00 00 00 00 00 00 def 00 00 00 00 04 3c 00 LDN 0x04 (COM1) idx 30 60 61 70 f0 val 01 02 80 06 00 def 00 00 00 00 00 LDN 0x05 (COM2) idx 30 60 61 70 f0 f1 f2 val 00 00 00 00 00 00 00 def NA 00 00 00 00 02 03 LDN 0x07 (Keyboard) idx 30 70 72 f0 val 01 01 0c 00 def 00 00 00 00 LDN 0x08 (Aux I/O) idx 30 b0 b1 b2 b3 b8 c0 c1 c2 c3 c4 c5 c6 c8 ca cb cc d0 d1 d2 d3 d4 d5 d6 d7 e0 e1 e2 e3 e4 e5 e6 e7 ef f0 f1 f2 f3 f4 f6 f9 fa val 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 def 00 NA NA NA NA NA 00 01 NA NA NA 00 NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA 00 00 00 MM NA NA NA LDN 0x0a (ACPI) idx 30 60 61 70 f0 val 00 00 00 00 00 def 00 00 00 NA NA
Here's flashrom -V: flashrom v0.9.1-r946 No coreboot table found. DMI string system-manufacturer: "Hewlett-Packard" DMI string system-product-name: "HP Mini 5103" DMI string system-version: " " DMI string baseboard-manufacturer: "Hewlett-Packard" DMI string baseboard-product-name: "1608" DMI string baseboard-version: "KBC Version 92.04" DMI string chassis-type: "Notebook" Laptop detected via DMI ======================================================================== WARNING! You seem to be running flashrom on a laptop. Laptops, notebooks and netbooks are difficult to support and we recommend to use the vendor flashing utility. The embedded controller (EC) in these machines often interacts badly with flashing. See http://www.flashrom.org/Laptops for details. ======================================================================== Found chipset "Intel NM10", enabling flash write... 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode enabled 0xffe00000/0xffa00000 FWH decode enabled 0xffd80000/0xff980000 FWH decode enabled 0xffd00000/0xff900000 FWH decode enabled 0xffc80000/0xff880000 FWH decode enabled 0xffc00000/0xff800000 FWH decode enabled 0xff700000/0xff300000 FWH decode disabled 0xff600000/0xff200000 FWH decode disabled 0xff500000/0xff100000 FWH decode disabled 0xff400000/0xff000000 FWH decode disabled Maximum FWH chip size: 0x100000 bytes BIOS Lock Enable: disabled, BIOS Write Enable: disabled, BIOS_CNTL is 0x0
Root Complex Register Block address = 0xfed1c000 GCS = 0x460: BIOS Interface Lock-Down: disabled, BOOT BIOS Straps: 0x1 (SPI) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3020 0x00: 0x8004 (SPIS) 0x02: 0x4020 (SPIC) 0x04: 0x00000000 (SPIA) 0x08: 0x00412500 (SPID0) 0x0c: 0x00000000 (SPID0+4) 0x10: 0x00000000 (SPID1) 0x14: 0x00000000 (SPID1+4) 0x18: 0x00000000 (SPID2) 0x1c: 0x00000000 (SPID2+4) 0x20: 0x00000000 (SPID3) 0x24: 0x00000000 (SPID3+4) 0x28: 0x00000000 (SPID4) 0x2c: 0x00000000 (SPID4+4) 0x30: 0x00000000 (SPID5) 0x34: 0x00000000 (SPID5+4) 0x38: 0x00000000 (SPID6) 0x3c: 0x00000000 (SPID6+4) 0x40: 0x00000000 (SPID7) 0x44: 0x00000000 (SPID7+4) 0x50: 0x00000000 (BBAR) 0x54: 0x0606 (PREOP) 0x56: 0x7f48 (OPTYPE) 0x58: 0x0405039f (OPMENU) 0x5c: 0x0102d820 (OPMENU+4) 0x60: 0x80ff01c0 (PBR0) 0x64: 0x00000000 (PBR1) 0x68: 0x00000000 (PBR2) 0x6c: 0x00000000 (PBR3)
WARNING: SPI Configuration Lockdown activated. Generating OPCODES... done SPI Read Configuration: prefetching disabled, caching enabled, OK. This chipset supports the following protocols: SPI. Calibrating delay loop... 738M loops per second, 100 myus = 211 us. OK. Probing for AMD Am29F010A/B, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F016D, 2048 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F040B, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F080B, 1024 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMD Am29LV040B, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMD Am29LV081B, 1024 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for ASD AE49F2008, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Atmel AT25DF021, 256 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT25DF041A, 512 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT25DF081, 1024 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT25DF161, 2048 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT25DF321, 4096 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT25DF321A, 4096 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT25DF641, 8192 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT25F512B, 64 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT25FS010, 128 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT25FS040, 512 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT26DF041, 512 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT26DF081A, 1024 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT26DF161, 2048 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT26DF161A, 2048 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT26F004, 512 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT29C512, 64 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Atmel AT29C010A, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Atmel AT29C020, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Atmel AT29C040A, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Atmel AT45CS1282, 16896 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT45DB011D, 128 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT45DB021D, 256 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT45DB041D, 512 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT45DB081D, 1024 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT45DB161D, 2048 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT45DB321C, 4224 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT45DB321D, 4096 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT45DB642D, 8192 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT49BV512, 64 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Atmel AT49F002(N), 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMIC A25L40PT, 512 KB: RDID returned 0xbf 0x25 0x41 0xbf. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25L40PU, 512 KB: RDID returned 0xbf 0x25 0x41 0xbf. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A29002B, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMIC A29002T, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMIC A29040B, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMIC A49LF040A, 512 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for EMST F49B002UA, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Eon EN25B05, 64 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B05T, 64 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B10, 128 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B10T, 128 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B20, 256 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B20T, 256 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B40, 512 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B40T, 512 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B80, 1024 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B80T, 1024 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B16, 2048 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B16T, 2048 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B32, 4096 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B32T, 4096 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B64, 8192 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B64T, 8192 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25D16, 2048 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25F05, 64 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25F10, 128 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25F20, 256 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25F40, 512 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25F80, 1024 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25F16, 2048 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25F32, 4096 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN29F010, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for EON EN29F002(A)(N)B, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for EON EN29F002(A)(N)T, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Intel 28F001BX-B, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Intel 28F001BX-T, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Intel 28F004S5, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Intel 82802AB, 512 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for Intel 82802AC, 1024 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for Macronix MX25L512, 64 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix MX25L1005, 128 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix MX25L2005, 256 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix MX25L4005, 512 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix MX25L8005, 1024 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix MX25L1605, 2048 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix MX25L1635D, 2048 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix MX25L3205, 4096 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix MX25L3235D, 4096 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix MX25L6405, 8192 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix MX25L12805, 16384 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix MX29F001B, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29F001T, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29F002B, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29F002T, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29LV040, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Numonyx M25PE10, 128 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Numonyx M25PE20, 256 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Numonyx M25PE40, 512 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Numonyx M25PE80, 1024 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Numonyx M25PE16, 2048 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for PMC Pm25LV010, 128 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for PMC Pm25LV016B, 2048 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for PMC Pm25LV020, 256 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for PMC Pm25LV040, 512 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for PMC Pm25LV080B, 1024 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for PMC Pm25LV512, 64 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for PMC Pm29F002T, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for PMC Pm29F002B, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for PMC Pm39LV010, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for PMC Pm49FL002, 256 KB: skipped. Host bus type SPI and chip bus type LPC,FWH are incompatible. Probing for PMC Pm49FL004, 512 KB: skipped. Host bus type SPI and chip bus type LPC,FWH are incompatible. Probing for Sanyo LF25FW203A, 2048 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Sharp LHF00L04, 1024 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for Spansion S25FL008A, 1024 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Spansion S25FL016A, 2048 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for SST SST25VF016B, 2048 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Chip status register is 00 Chip status register: Block Protect Write Disable (BPL) is not set Chip status register: Auto Address Increment Programming (AAI) is not set Chip status register: Bit 5 / Block Protect 3 (BP3) is not set Chip status register: Bit 4 / Block Protect 2 (BP2) is not set Chip status register: Bit 3 / Block Protect 1 (BP1) is not set Chip status register: Bit 2 / Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Resulting block protection : none Found chip "SST SST25VF016B" (2048 KB, SPI) at physical address 0xffe00000. Probing for SST SST25VF032B, 4096 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for SST SST25VF040.REMS, 512 KB: Invalid OPCODE 0x90 Probing for SST SST25VF040B, 512 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for SST SST25VF040B.REMS, 512 KB: Invalid OPCODE 0x90 Probing for SST SST25VF080B, 1024 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for SST SST28SF040A, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST29EE010, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST29LE010, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST29EE020A, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST29LE020, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST39SF512, 64 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST39SF010A, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST39SF020A, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST39SF040, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF512, 64 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF010, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF020, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF040, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF080, 1024 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST49LF002A/B, 256 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for SST SST49LF003A/B, 384 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for SST SST49LF004A/B, 512 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for SST SST49LF004C, 512 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for SST SST49LF008A, 1024 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for SST SST49LF008C, 1024 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for SST SST49LF016C, 2048 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for SST SST49LF020, 256 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for SST SST49LF020A, 256 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for SST SST49LF040, 512 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for SST SST49LF040B, 512 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for SST SST49LF080A, 1024 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for SST SST49LF160C, 2048 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for ST M25P05-A, 64 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for ST M25P05.RES, 64 KB: RDID returned 0xbf 0x25 0x41. Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for ST M25P10.RES, 128 KB: RDID returned 0xbf 0x25 0x41. Ignoring RES in favour of RDID. Probing for ST M25P20, 256 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for ST M25P40, 512 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for ST M25P40-old, 512 KB: RDID returned 0xbf 0x25 0x41. Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for ST M25P16, 2048 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for ST M25P32, 4096 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for ST M25P64, 8192 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for ST M25P128, 16384 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for ST M29F002B, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for ST M29F002T/NT, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for ST M29F040B, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for ST M29F400BT, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for ST M29W010B, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for ST M29W040B, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for ST M29W512B, 64 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for ST M50FLW040A, 512 KB: skipped. Host bus type SPI and chip bus type LPC,FWH are incompatible. Probing for ST M50FLW040B, 512 KB: skipped. Host bus type SPI and chip bus type LPC,FWH are incompatible. Probing for ST M50FLW080A, 1024 KB: skipped. Host bus type SPI and chip bus type LPC,FWH are incompatible. Probing for ST M50FLW080B, 1024 KB: skipped. Host bus type SPI and chip bus type LPC,FWH are incompatible. Probing for ST M50FW002, 256 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for ST M50FW016, 2048 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for ST M50FW040, 512 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for ST M50FW080, 1024 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for ST M50LPW116, 2048 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for SyncMOS S29C31004T, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SyncMOS S29C51001T, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SyncMOS S29C51002T, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SyncMOS S29C51004T, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for TI TMS29F002RB, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for TI TMS29F002RT, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Winbond W25x10, 128 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Winbond W25x20, 256 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Winbond W25x40, 512 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Winbond W25x80, 1024 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Winbond W25x16, 2048 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Winbond W25x32, 4096 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Winbond W25x64, 8192 KB: RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Winbond W29C011, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Winbond W29C020C, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Winbond W29C040P, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Winbond W29EE011, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Winbond W39V040A, 512 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for Winbond W39V040B, 512 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for Winbond W39V040C, 512 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for Winbond W39V040FA, 512 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for Winbond W39V080A, 1024 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for Winbond W49F002U, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Winbond W49V002A, 256 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for Winbond W49V002FA, 256 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for Winbond W39V080FA, 1024 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for Winbond W39V080FA (dual mode), 512 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for Atmel unknown Atmel SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Not unmapping zero size at (nil) Probing for EON unknown EON SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Not unmapping zero size at (nil) Probing for Macronix unknown Macronix SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Not unmapping zero size at (nil) Probing for PMC unknown PMC SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Not unmapping zero size at (nil) Probing for SST unknown SST SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Not unmapping zero size at (nil) Probing for ST unknown ST SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Not unmapping zero size at (nil) Probing for Sanyo unknown Sanyo SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Not unmapping zero size at (nil) Probing for Generic unknown SPI chip (RDID), 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0xbf 0x25 0x41. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Not unmapping zero size at (nil) Probing for Generic unknown SPI chip (REMS), 0 KB: Not mapping flash chip, zero size at 0x00000000. Invalid OPCODE 0x90 Not unmapping zero size at (nil) === This flash part has status UNTESTED for operations: ERASE Please email a report to flashrom@flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -rV, -wV, -EV), and mention which mainboard or programmer you tested. Thanks for your help! === No operations were specified.
* Joesph Czerniak joseph.czerniak@gmail.com [110411 22:22]:
Hi, I bought the HP 5103 netbook. I was wondering if coreboot would run on it. It has the following specs:
Here are the quick specs (the more detailed specs are at the bottom):
CPU: Intel Atom N550 with an integrated northbridge Southbridge: Intel N10/ICH 7 SuperIO: SMSC FDC37B72x
So on your motherboard page, the closest motherboard I could find is the Intel D945GCLF. So I found the Kconfig file and thought a good way to start would be to modify it. It has: select CPU_INTEL_SOCKET_441 select NORTHBRIDGE_INTEL_I945GC select SOUTHBRIDGE_INTEL_I82801GX select SUPERIO_SMSC_LPC47M15X
Should I start by modifying these four lines? Then compile and flash?
The socket for the N550 is the Intel Socket 437. Does coreboot support that?
The other question I had was about the northbridge. Since its integrated into the CPU, should I remove that line? Or can I keep it in?
The N10/NM10 northbridge is unsupported by coreboot as of now. You will have to write support for that in order to get coreboot working on your system.
Stefan
On Mon, Apr 11, 2011 at 8:48 PM, Stefan Reinauer stefan.reinauer@coreboot.org wrote:
- Joesph Czerniak joseph.czerniak@gmail.com [110411 22:22]:
Hi, I bought the HP 5103 netbook. I was wondering if coreboot would run on it. It has the following specs:
Here are the quick specs (the more detailed specs are at the bottom):
CPU: Intel Atom N550 with an integrated northbridge Southbridge: Intel N10/ICH 7 SuperIO: SMSC FDC37B72x
So on your motherboard page, the closest motherboard I could find is the Intel D945GCLF. So I found the Kconfig file and thought a good way to start would be to modify it. It has: select CPU_INTEL_SOCKET_441 select NORTHBRIDGE_INTEL_I945GC select SOUTHBRIDGE_INTEL_I82801GX select SUPERIO_SMSC_LPC47M15X
Should I start by modifying these four lines? Then compile and flash?
The socket for the N550 is the Intel Socket 437. Does coreboot support that?
The other question I had was about the northbridge. Since its integrated into the CPU, should I remove that line? Or can I keep it in?
The N10/NM10 northbridge is unsupported by coreboot as of now. You will have to write support for that in order to get coreboot working on your system.
Stefan
The NM10 isn't the northbridge, it's the southbridge, and all it is is an ICH7 with one different PCI ID. The northbridge is integrated into the Atom CPU, and it's VERY different from the i945 (don't bother trying it, it won't work). Although public datasheets are available, the Bios Porting Guides for the Atom N500 and D400/500 series are covered under Intel NDA.
-Corey
-
Corey Osgood -
Joesph Czerniak -
Stefan Reinauer