Looks like files got patched but new files didn't get added.
Yep. Sorry I botched it.
Rev 4550.
Thanks, Myles
Cool.
I'll have another patch coming soon, once it looks like the last one is in and secure.
Looks like with a bit of help from Patrick the build is back up with VGA restored under CBFS.
Jon
-----Original Message----- From: Myles Watson [mailto:mylesgw@gmail.com] Sent: 18 August 2009 16:14 To: Harrison, Jon (SELEX GALILEO, UK); coreboot@coreboot.org Subject: RE: [coreboot] build service results for r4549
*** WARNING ***This message has originated outside your organisation, either from an external partner or the Global Internet. Keep this in mind if you answer this message.
Looks like files got patched but new files didn't get added.
Yep. Sorry I botched it.
Rev 4550.
Thanks, Myles
SELEX Sensors and Airborne Systems Limited Registered Office: Sigma House, Christopher Martin Road, Basildon, Essex SS14 3EL A company registered in England & Wales. Company no. 02426132 ******************************************************************** This email and any attachments are confidential to the intended recipient and may also be privileged. If you are not the intended recipient please delete it from your system and notify the sender. You should not copy it or use it for any purpose nor disclose or distribute its contents to any other person. ********************************************************************
Myles,
Please find attached patches to restore the functionality of the EPIA-N(L)/CN400 build, after the recent change to CBFS. This patch fixes the build for loading VGA/BOCHS during VGA Init.
I've tested this against R4553 and EPIA-NL8000EG.
Features Tested as Working using FILO 0.6.0 Payload launching Fedora Core 9 (2.6.25 kernel):: VGA Console / X SATA (As Boot device) PATA CDROM (Autodetect/Mount/Eject all seem to work) USB (keyboard, mouse and USB Flash Disk) Networking ACPI (S0/S5 Soft-off Works OK, Linux PM Seems to be working, PCI IRQ Routing) IOAPIC/LAPIC
Legacy Keyboard/Mouse have NOT been tested, but should work based on existing VT8237R work.
Boots to FILO in ~1 second. FILO USB Keyboard/Mouse Support tested as working.
I've also attached a log of the boot console output.
cn400-src-v9.patch should be applied at src level cn400-targets-v9.patch should be applied at targets level
Signed-off-by: Jon Harrison bothlyn@blueyonder.co.uk
PS The change itself is a bit of a hack to get things up and running again. Discussions with Patrick suggest that the way that I'm doing the VGA Init, based on the rather elderly epia-m build, is obsolete/anachronistic as there is stuff in the core functionality to the same job perhaps a bit more cleanly. I don't really have the time at the moment to sort this out, perhaps someone else will have a look if a working build is out there ?
-----Original Message----- From: Myles Watson [mailto:mylesgw@gmail.com] Sent: 18 August 2009 16:14 To: Harrison, Jon (SELEX GALILEO, UK); coreboot@coreboot.org Subject: RE: [coreboot] build service results for r4549
*** WARNING ***This message has originated outside your organisation, either from an external partner or the Global Internet. Keep this in mind if you answer this message.
Looks like files got patched but new files didn't get added.
Yep. Sorry I botched it.
Rev 4550.
Thanks, Myles
SELEX Sensors and Airborne Systems Limited Registered Office: Sigma House, Christopher Martin Road, Basildon, Essex SS14 3EL A company registered in England & Wales. Company no. 02426132 ******************************************************************** This email and any attachments are confidential to the intended recipient and may also be privileged. If you are not the intended recipient please delete it from your system and notify the sender. You should not copy it or use it for any purpose nor disclose or distribute its contents to any other person. ********************************************************************
-
Harrison, Jon (SELEX GALILEO, UK) -
Myles Watson