Dear Sir.
My ENV is see below.
CPU : Rangeley C2358(Based on ADI board)
Curently, I'm try to use the u-boot(2016.05) but have a "boot fail".
log is see below.
U-Boot 2016.05-rc3 (Nov 23 2016 - 16:42:44 +0900)
CPU: x86_64, vendor Intel, device 406d8h DRAM: 4 GiB dm_pci_hose_probe_bus: Internal error, bus 'pch@1,0' got seq 0, expected 1 Using default environment
Model: QEMU x86 (I440FX) dm_pci_hose_probe_bus: Internal error, bus 'pch@1,0' got seq 0, expected 1 initcall sequence 7fc5a340 failed at call 01110185 (err=-32) ### ERROR ### Please RESET the board ###
I was use the "qemu-x86_i440fx.dts" It is a default dts of u-boot.
Boot failure is caused by "wrong DTS", I guess.
And.
A few month ago, I was success booted use the u-boot.
But, I was lost the source code and memories..
Please advise to me.
Thank you.
-
김유석