[patch 0/3] A few buildrom patches

Here we go again - the "classic" vsa patch is being resubmitted,
along with the openVSA patch and a FILO bug fix just for funsies.

You should now be able to build a openVSA blob into your v2 code
and shoot for the moon (even when it is eclipsed).  v3 love is still
needed, but it should be pretty straight forward from this point on.

Enjoy,
Jordan

[patch 1/3] Fix a dependency problem with FILO and bump the revision

Fix an annoying dependency problem with the FILO output and move the
SVN revision to latest.

Signed-off-by: Jordan Crouse 
Index: buildrom-devel/packages/filo/filo.mk
===================================================================
--- buildrom-devel.orig/packages/filo/filo.mk	2008-02-20 16:24:45.000000000 -0700
+++ buildrom-devel/packages/filo/filo.mk	2008-02-20 16:24:50.000000000 -0700
@@ -1,5 +1,5 @@
-FILO_URL=svn://80.190.231.112/filo/trunk/filo-0.5
-FILO_TAG=34
+FILO_URL=svn://coreboot.org/filo/trunk/filo-0.5
+FILO_TAG=42

FILO_DIR=$(BUILD_DIR)/filo
 FILO_SRC_DIR=$(FILO_DIR)/svn
@@ -59,16 +59,20 @@
    @ mkdir -p $(OUTPUT_DIR)/config/filo
    @ cp $(FILO_SRC_DIR)/Config $(OUTPUT_DIR)/config/filo/

+$(FILO_STAMP_DIR)/.copied: $(FILO_SRC_DIR)/filo.elf
+	@ mkdir -p $(shell dirname $(PAYLOAD_ELF))
+	@ cp $(FILO_SRC_DIR)/filo.elf $(PAYLOAD_ELF)
+	@ touch $@
+
 $(FILO_STAMP_DIR) $(FILO_LOG_DIR):
    @ mkdir -p $@

-filo: $(FILO_STAMP_DIR) $(FILO_LOG_DIR) $(FILO_SRC_DIR)/filo.elf
-	@ mkdir -p $(OUTPUT_DIR)
-	@ cp $(FILO_SRC_DIR)/filo.elf $(PAYLOAD_ELF)
+filo: $(FILO_STAMP_DIR) $(FILO_LOG_DIR) $(FILO_STAMP_DIR)/.copied

filo-clean:
    @ echo "Cleaning filo..."
    @ $(MAKE) -C $(FILO_SRC_DIR) clean > /dev/null 2>&1
+	@ rm -f $(FILO_STAMP_DIR)/.copied

filo-distclean:
    @ rm -rf $(FILO_DIR)/*

[patch 2/3] Fixup VSA fetching code

In preparation for v3 and the upcoming openvsa changes,
rearrange the VSA fetching code.  We now fetch an 
uncompressed blob, and do the compressing within buildrom.
I'm mainly concentrating on v2 right now (this is not quite
v3 friendly), but it will be.

Also, work around a hopefully temporary bug on the AMD
servers.

Signed-off-by: Jordan Crouse 
Index: buildrom-devel/packages/coreboot-v2/geodelx.mk
===================================================================
--- buildrom-devel.orig/packages/coreboot-v2/geodelx.mk	2008-02-20 15:20:45.000000000 -0700
+++ buildrom-devel/packages/coreboot-v2/geodelx.mk	2008-02-20 16:10:05.000000000 -0700
@@ -10,16 +10,11 @@
 CBV2_URL=svn://coreboot.org/repos/trunk/coreboot-v2
 CBV2_TARBALL=coreboot-svn-$(CBV2_TAG).tar.gz
 CBV2_PAYLOAD_TARGET=$(CBV2_BUILD_DIR)/payload.$(CBV2_PAYLOAD_FILE_EXT)
-VSA_URL=http://www.amd.com/files/connectivitysolutions/geode/geode_lx/
-CBV2_VSA=lx_vsa.36k.bin
+
 TARGET_ROM = $(COREBOOT_VENDOR)-$(COREBOOT_BOARD).rom

include $(PACKAGE_DIR)/coreboot-v2/coreboot.inc

-$(SOURCE_DIR)/$(CBV2_VSA):
-	@ echo "Fetching the VSA blob..."
-	wget -P $(SOURCE_DIR) $(VSA_URL)/$(CBV2_VSA).gz  -O $@
-
 $(SOURCE_DIR)/$(CBV2_TARBALL):
    @ echo "Fetching the coreboot rev $(CBV2_TAG) code..."
    @ mkdir -p $(SOURCE_DIR)/coreboot
@@ -27,12 +22,10 @@
    $(CBV2_TAG) $(SOURCE_DIR)/$(CBV2_TARBALL) \
    > $(CBV2_FETCH_LOG) 2>&1

-# Special rule - append the VSA
-
-$(OUTPUT_DIR)/$(TARGET_ROM): $(CBV2_OUTPUT) $(SOURCE_DIR)/$(CBV2_VSA)
+$(OUTPUT_DIR)/$(TARGET_ROM): $(CBV2_OUTPUT) $(GEODE_PADDED_VSA)
    @ mkdir -p $(OUTPUT_DIR)
-	@ cat $(SOURCE_DIR)/$(CBV2_VSA) $(CBV2_OUTPUT) > $@
+	@ cat $(GEODE_PADDED_VSA) $(CBV2_OUTPUT) > $@

-coreboot: $(OUTPUT_DIR)/$(TARGET_ROM)
-coreboot-clean: generic-coreboot-clean
-coreboot-distclean: generic-coreboot-distclean
+coreboot: geodevsa $(OUTPUT_DIR)/$(TARGET_ROM)
+coreboot-clean: geodevsa-clean generic-coreboot-clean
+coreboot-distclean: geodevsa-distclean generic-coreboot-distclean
Index: buildrom-devel/packages/utils/nrv2b.mk
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ buildrom-devel/packages/utils/nrv2b.mk	2008-02-20 16:10:05.000000000 -0700
@@ -0,0 +1,47 @@
+NRV2B_URL=svn://coreboot.org/repos/trunk/coreboot-v2/util/nrv2b
+NRV2B_TAG=3086
+
+NRV2B_DIR=$(BUILD_DIR)/nrv2b
+NRV2B_SRC_DIR=$(NRV2B_DIR)/svn
+NRV2B_STAMP_DIR=$(NRV2B_DIR)/stamps
+NRV2B_LOG_DIR=$(NRV2B_DIR)/logs
+NRV2B_TARBALL=nrv2b-svn-$(NRV2B_TAG).tar.gz
+
+ifeq ($(CONFIG_VERBOSE),y)
+NRV2B_BUILD_LOG=/dev/stdout
+NRV2B_FETCH_LOG=/dev/stdout
+else
+NRV2B_BUILD_LOG=$(NRV2B_LOG_DIR)/build.log
+NRV2B_FETCH_LOG=$(NRV2B_LOG_DIR)/fetch.log
+endif
+
+$(SOURCE_DIR)/$(NRV2B_TARBALL):
+	mkdir -p $(SOURCE_DIR)/nrv2b
+	@ $(BIN_DIR)/fetchsvn.sh $(NRV2B_URL) $(SOURCE_DIR)/nrv2b \
+	$(NRV2B_TAG) $@ > $(NRV2B_FETCH_LOG) 2>&1
+
+$(NRV2B_STAMP_DIR)/.unpacked: $(SOURCE_DIR)/$(NRV2B_TARBALL)
+	@ tar -C $(NRV2B_DIR) -zxf $(SOURCE_DIR)/$(NRV2B_TARBALL)
+	@ touch $@
+
+$(NRV2B_SRC_DIR)/nrv2b: $(NRV2B_STAMP_DIR)/.unpacked
+	@ (unset CFLAGS; unset LDFLAGS; \
+	$(MAKE) -C $(NRV2B_SRC_DIR) \
+	 > $(NRV2B_BUILD_LOG) 2>&1)
+
+$(STAGING_DIR)/bin/nrv2b: $(NRV2B_SRC_DIR)/nrv2b
+	mkdir -p $(STAGING_DIR)/bin
+	cp $< $@
+
+$(NRV2B_STAMP_DIR) $(NRV2B_LOG_DIR):
+	@ mkdir -p $@
+
+nrv2b: $(NRV2B_STAMP_DIR) $(NRV2B_LOG_DIR) $(STAGING_DIR)/bin/nrv2b
+
+nrv2b-clean:
+	@ echo "Cleaning nrv2b..."
+	@ $(MAKE) -C $(NRV2B_SRC_DIR) clean > /dev/null 2>&1
+
+nrv2b-distclean:
+	@ rm -r $(NRV2B_DIR)
+
Index: buildrom-devel/packages/geodevsa/amdvsa.inc
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ buildrom-devel/packages/geodevsa/amdvsa.inc	2008-02-20 16:10:05.000000000 -0700
@@ -0,0 +1,21 @@
+# Target file for the AMD VSA binary - included from geodevsa.mk
+
+AMDVSA_URL=http://www.amd.com/files/connectivitysolutions/geode/geode_lx/
+AMDVSA_BIN=amd_vsa_lx_1.01.bin
+
+# 2008-02-19 - the AMD URL above is broken, when trying to wget
+# amd_vsa_lx_1.01.bin.gz it arrives uncompressed instead.  This
+# breakage is expected to be fixed; but to properly
+# handle this temporary situation without breakage down the line,
+# we do the unsual check of the file type below:
+# Jordan
+
+$(SOURCE_DIR)/$(AMDVSA_BIN):
+	@ echo "Fetching the AMD VSA binary..."
+	wget -P $(SOURCE_DIR) $(AMDVSA_URL)/$(AMDVSA_BIN).gz -O $@.gz
+	@ if file $@.gz | grep -q "COM executable"; then \
+	mv $@.gz $@; else gunzip -q $@.gz; fi
+
+$(GEODE_UNCOMPRESSED_VSA): $(SOURCE_DIR)/$(AMDVSA_BIN)
+	@ mkdir -p $(shell dirname $(GEODE_UNCOMPRESSED_VSA))
+	@ cp $< $@
Index: buildrom-devel/packages/geodevsa/geodevsa.mk
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ buildrom-devel/packages/geodevsa/geodevsa.mk	2008-02-20 16:10:05.000000000 -0700
@@ -0,0 +1,33 @@
+# Master targets for VSA manipulation
+
+GEODE_UNCOMPRESSED_VSA=$(OUTPUT_DIR)/vsa/geodevsa.bin
+GEODE_COMPRESSED_VSA=$(OUTPUT_DIR)/vsa/geodevsa.bin.nrv
+GEODE_PADDED_VSA=$(OUTPUT_DIR)/vsa/geodevsa.bin.nrv.pad
+
+GEODE_VSA_SIZE=36864
+
+ifeq ($(CONFIG_COREBOOT_V2),y)
+VSA_BUILD_TARGET = $(GEODE_PADDED_VSA)
+else
+VSA_BUILD_TARGET = $(GEODE_UNCOMPRESSED_VSA)
+endif
+
+include $(PACKAGE_DIR)/geodevsa/amdvsa.inc
+
+$(GEODE_COMPRESSED_VSA): $(GEODE_UNCOMPRESSED_VSA)
+	@ $(STAGING_DIR)/bin/nrv2b e $(GEODE_UNCOMPRESSED_VSA) $@ \
+	> /dev/null 2>&1
+
+$(GEODE_PADDED_VSA): $(GEODE_COMPRESSED_VSA)
+	@ cp $< $@
+	@ (size=`stat -c %s $<`; count=`expr $(GEODE_VSA_SIZE) - $$size`; \
+	dd if=/dev/zero bs=1 count=$$count  >> $@ 2> /dev/null)
+
+geodevsa: $(VSA_BUILD_TARGET)
+
+geodevsa-clean:
+	@ rm -f $(GEODE_UNCOMPRESSED_VSA) $(GEODE_COMPRESSED_VSA)
+	@ rm -f $(GEODE_PADDED_VSA)
+
+geodevsa-distclean:
+	@ rm -rf $(OUTPUT_DIR)/vsa
Index: buildrom-devel/Config.in
===================================================================
--- buildrom-devel.orig/Config.in	2008-02-20 15:20:45.000000000 -0700
+++ buildrom-devel/Config.in	2008-02-20 16:10:05.000000000 -0700
@@ -124,6 +124,10 @@
    bool
    default n

+config PLATFORM_GEODE
+	bool
+	default n
+
 config PAYLOAD_64BIT
    bool
    default n
@@ -137,5 +141,13 @@
    bool
    default n

+# This config option will only be set by platforms that need it
+# (geode + coreboot v2)
+
+config USE_NRV2B
+	bool
+	depends PLATFORM_GEODE && COREBOOT_V2
+	default y
+
 source config/platforms/Config.in
 source config/payloads/Config.in
Index: buildrom-devel/config/payloads/payloads.conf
===================================================================
--- buildrom-devel.orig/config/payloads/payloads.conf	2008-02-20 15:20:45.000000000 -0700
+++ buildrom-devel/config/payloads/payloads.conf	2008-02-20 16:10:05.000000000 -0700
@@ -33,6 +33,7 @@
 endif

HOSTTOOLS-$(CONFIG_BUILD_QEMU) += qemu
+HOSTTOOLS-$(CONFIG_USE_NRV2B) += nrv2b

# Sanity check

Index: buildrom-devel/config/platforms/Config.in
===================================================================
--- buildrom-devel.orig/config/platforms/Config.in	2008-02-20 15:20:45.000000000 -0700
+++ buildrom-devel/config/platforms/Config.in	2008-02-20 16:11:52.000000000 -0700
@@ -45,27 +45,32 @@
        bool "AMD Geode LX 'Norwich'"
        depends VENDOR_AMD
        select PLATFORM
+       select PLATFORM_GEODE

config PLATFORM_DBE61
        bool "Artec Group DBE61"
        depends VENDOR_ARTEC_GROUP
        select PLATFORM
+       select PLATFORM_GEODE

config PLATFORM_ALIX1C
        bool "PC Engines ALIX1.C"
        depends VENDOR_PC_ENGINES
        select PLATFORM
+       select PLATFORM_GEODE

config PLATFORM_MSM800SEV
        bool "Advanced Digital Logic MSM800SEV"
        depends VENDOR_ADVANCED_DIGITAL_LOGIC
        select PLATFORM
+       select PLATFORM_GEODE

config PLATFORM_DB800
    bool "AMD DB800"
    depends VENDOR_AMD
    depends COREBOOT_V2
    select PLATFORM
+	select PLATFORM_GEODE

config PLATFORM_GA_M57SLI_S4
        bool "GIGABYTE GA-M57SLI-S4"

[patch 3/3] Add openVSA

Add OpenVSA as an option for Geode platform rather the AMD 
or "classic" VSA.

Signed-off-by: Jordan Crouse 
Index: buildrom-devel/packages/geodevsa/geodevsa.mk
===================================================================
--- buildrom-devel.orig/packages/geodevsa/geodevsa.mk	2008-02-20 16:10:05.000000000 -0700
+++ buildrom-devel/packages/geodevsa/geodevsa.mk	2008-02-20 16:12:15.000000000 -0700
@@ -12,7 +12,17 @@
 VSA_BUILD_TARGET = $(GEODE_UNCOMPRESSED_VSA)
 endif

+VSA_CLEAN_TARGET=
+VSA_DISTCLEAN_TARGET=
+
+ifeq ($(CONFIG_VSA_LEGACY),y)
 include $(PACKAGE_DIR)/geodevsa/amdvsa.inc
+else
+include $(PACKAGE_DIR)/geodevsa/openvsa.inc
+
+VSA_CLEAN_TARGET=openvsa-clean
+VSA_DISTCLEAN_TARGET=openvsa-distclean
+endif

$(GEODE_COMPRESSED_VSA): $(GEODE_UNCOMPRESSED_VSA)
    @ $(STAGING_DIR)/bin/nrv2b e $(GEODE_UNCOMPRESSED_VSA) $@ \
@@ -25,9 +35,9 @@

geodevsa: $(VSA_BUILD_TARGET)

-geodevsa-clean:
+geodevsa-clean: $(VSA_CLEAN_TARGET)
    @ rm -f $(GEODE_UNCOMPRESSED_VSA) $(GEODE_COMPRESSED_VSA)
    @ rm -f $(GEODE_PADDED_VSA)

-geodevsa-distclean:
+geodevsa-distclean: $(VSA_DISTCLEAN_TARGET)
    @ rm -rf $(OUTPUT_DIR)/vsa
Index: buildrom-devel/packages/geodevsa/openvsa.inc
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ buildrom-devel/packages/geodevsa/openvsa.inc	2008-02-20 16:12:15.000000000 -0700
@@ -0,0 +1,53 @@
+# Build target for openVSA - included from geodevsa.mk
+
+OPENVSA_URL=svn://openbios.org/openvsa/trunk/openvsa
+OPENVSA_TAG=6
+
+OPENVSA_DIR=$(BUILD_DIR)/openvsa
+OPENVSA_SRC_DIR=$(OPENVSA_DIR)/svn
+OPENVSA_STAMP_DIR=$(OPENVSA_DIR)/stamps
+OPENVSA_LOG_DIR=$(OPENVSA_DIR)/logs
+OPENVSA_TARBALL=openvsa-svn-$(OPENVSA_TAG).tar.gz
+
+ifeq ($(CONFIG_VERBOSE),y)
+OPENVSA_BUILD_LOG=/dev/stdout
+OPENVSA_FETCH_LOG=/dev/stdout
+else
+OPENVSA_BUILD_LOG=$(OPENVSA_LOG_DIR)/build.log
+OPENVSA_FETCH_LOG=$(OPENVSA_LOG_DIR)/fetch.log
+endif
+
+$(SOURCE_DIR)/$(OPENVSA_TARBALL):
+	@ mkdir -p $(SOURCE_DIR)/openvsa
+	@ mkdir -p $(OPENVSA_LOG_DIR)
+	@ echo "Fetching openvsa..."
+	@ $(BIN_DIR)/fetchsvn.sh $(OPENVSA_URL) $(SOURCE_DIR)/openvsa \
+	$(OPENVSA_TAG) $@ > $(OPENVSA_FETCH_LOG) 2>&1
+
+$(OPENVSA_STAMP_DIR)/.unpacked: $(SOURCE_DIR)/$(OPENVSA_TARBALL)
+	@ mkdir -p $(OPENVSA_DIR)
+	@ tar -C $(OPENVSA_DIR) -zxf $(SOURCE_DIR)/$(OPENVSA_TARBALL)
+	@ mkdir -p $(OPENVSA_STAMP_DIR)
+	@ touch $@
+
+$(OPENVSA_SRC_DIR)/vsa_lx.bin: $(OPENVSA_STAMP_DIR)/.unpacked
+	@ mkdir -p $(OPENVSA_LOG_DIR)
+	@ echo "Building openvsa..."
+	@(unset LDFLAGS; $(MAKE) -C $(OPENVSA_SRC_DIR) \
+	> $(OPENVSA_BUILD_LOG) 2>&1)
+
+$(GEODE_UNCOMPRESSED_VSA): $(OPENVSA_SRC_DIR)/vsa_lx.bin
+	@ mkdir -p $(shell dirname $(GEODE_UNCOMPRESSED_VSA))
+	@ cp $< $@
+
+openvsa: $(OPENVSA_SRC_DIR)/vsa_lx.bin
+
+openvsa-clean:
+	@ if [ -d $(OPENVSA_SRC_DIR) ]; then \
+	echo "Cleaning openvsa..."; \
+	$(MAKE) -C $(OPENVSA_SRC_DIR) clean > /dev/null 2>&1; \
+	fi
+
+openvsa-distclean:
+	@ rm -rf $(OPENVSA_DIR)
+
Index: buildrom-devel/config/platforms/Config.in
===================================================================
--- buildrom-devel.orig/config/platforms/Config.in	2008-02-20 16:11:52.000000000 -0700
+++ buildrom-devel/config/platforms/Config.in	2008-02-20 16:12:34.000000000 -0700
@@ -125,6 +125,23 @@
    select PLATFORM_SUPPORT_64BIT
 endchoice

+choice
+	prompt "Geode VSA SMM handler"
+	depends PLATFORM_GEODE
+	default VSA_LEGACY
+	help
+	  Select the SMM handler source to use with Geode platforms
+
+config VSA_LEGACY
+	bool "Legacy VSA binary from AMD"
+
+config VSA_OPENVSA
+	bool "OpenVSA"
+	depends EXPERIMENTAL
+
+endchoice
+
+
 config BUILD_QEMU
    bool "Build QEMU with patches for LinuxBIOS"
    depends PLATFORM_QEMU-X86

[patch 2/3] Fixup VSA fetching code

[Peter Stuge]

On Wed, Feb 20, 2008 at 04:28:58PM -0700, [e-mail] wrote:
> +config PLATFORM_GEODE
> bool
> default n

..
> @@ -45,27 +45,32 @@
>         bool "AMD Geode LX 'Norwich'"
>         depends VENDOR_AMD
>         select PLATFORM
>   select PLATFORM_GEODE
>
> config PLATFORM_DBE61
>         bool "Artec Group DBE61"
>         depends VENDOR_ARTEC_GROUP
>         select PLATFORM
>   select PLATFORM_GEODE

Should PLATFORM_GEODE select PLATFORM?

//Peter

[patch 2/3] Fixup VSA fetching code

[Ward Vandewege]

On Wed, Feb 20, 2008 at 04:28:58PM -0700, [e-mail] wrote:
> In preparation for v3 and the upcoming openvsa changes,
> rearrange the VSA fetching code.  We now fetch an 
> uncompressed blob, and do the compressing within buildrom.
> I'm mainly concentrating on v2 right now (this is not quite
> v3 friendly), but it will be.
>
> Also, work around a hopefully temporary bug on the AMD
> servers.

That workaround did not work for me, see a modified version below that fixes
the build.
> --- /dev/null	1970-01-01 00:00:00.000000000 +0000
> +++ buildrom-devel/packages/geodevsa/amdvsa.inc	2008-02-20 16:10:05.000000000 -0700
> @@ -0,0 +1,21 @@
> +# Target file for the AMD VSA binary - included from geodevsa.mk
>
> +AMDVSA_URL=http://www.amd.com/files/connectivitysolutions/geode/geode_lx/
> +AMDVSA_BIN=amd_vsa_lx_1.01.bin
>
> +# 2008-02-19 - the AMD URL above is broken, when trying to wget
> +# amd_vsa_lx_1.01.bin.gz it arrives uncompressed instead.  This
> +# breakage is expected to be fixed; but to properly
> +# handle this temporary situation without breakage down the line,
> +# we do the unsual check of the file type below:
> +# Jordan
>
> +$(SOURCE_DIR)/$(AMDVSA_BIN):
> @ echo "Fetching the AMD VSA binary..."
> wget -P $(SOURCE_DIR) $(AMDVSA_URL)/$(AMDVSA_BIN).gz -O $@.gz
> @ if file $@.gz | grep -q "COM executable"; then \
> mv $@.gz $@; else gunzip -q $@.gz; fi

The above did not work for me (I just got 'data' as output from 'file'). I
think this is perhaps a more reliable:

@ if file $@.gz | grep -q "gzip"; then \
  gunzip -q $@.gz; else mv $@.gz $@; fi

It fixes the build for me.

Thanks,
Ward.

[patch 3/3] Add openVSA

[Ward Vandewege]

On Wed, Feb 20, 2008 at 04:28:59PM -0700, [e-mail] wrote:
> Add OpenVSA as an option for Geode platform rather the AMD 
> or "classic" VSA.
>
> Signed-off-by: Jordan Crouse

This builds for me, but I have not tested it (yet) on real hardware.

Acked-by: Ward Vandewege:

Thanks,
Ward.

[patch 1/3] Fix a dependency problem with FILO and bump the revision

[Ward Vandewege]

On Wed, Feb 20, 2008 at 04:28:57PM -0700, [e-mail] wrote:
> Fix an annoying dependency problem with the FILO output and move the
> SVN revision to latest.

I did not realize we were still using such an old FILO version in buildrom,
nor that we were using a hardcoded IP.

Build-tested ok for alix1c (v2).
> Signed-off-by: Jordan Crouse

Acked-by: Ward Vandewege

Thanks,
Ward.

Add openVSA

[Jordan Crouse]

On 21/02/08 17:51 -0500, Ward Vandewege wrote:
> On Wed, Feb 20, 2008 at 04:28:59PM -0700, [e-mail] wrote:
> > Add OpenVSA as an option for Geode platform rather the AMD 
> > or "classic" VSA.
> >
> > Signed-off-by: Jordan Crouse
>
> This builds for me, but I have not tested it (yet) on real hardware.

if you did, you would probably be very sad.  I am told it hangs quite
early.
> Acked-by: Ward Vandewege:
>
> Thanks,
> Ward.

Add openVSA

[Jordan Crouse]

On 21/02/08 17:51 -0500, Ward Vandewege wrote:
> On Wed, Feb 20, 2008 at 04:28:59PM -0700, [e-mail] wrote:
> > Add OpenVSA as an option for Geode platform rather the AMD 
> > or "classic" VSA.
> >
> > Signed-off-by: Jordan Crouse
>
> This builds for me, but I have not tested it (yet) on real hardware.
>
> Acked-by: Ward Vandewege:
>
> Thanks,
> Ward.

r130
>