[LinuxBIOS] hda: lost interrupt when executing linux kernel

[michal wan]

1 it looks ok running linuxbios and filo 
2 loading kernel ok

when  executing linux kernel, something occurs like "hda: lost interrupt"

there are some problems which can be seen from the output of linux kernel
1  AMD5536: not 100% native mode: will probe irqs lalater
2 AMD5536: neither IDE port enabled (BIOS)

another problem is below
in the function model_lx_init() from src/cpu/amd/model_lx/model_lx_init.c
if umcomment setup_lapic() and vsm_end_post_smi(), it will occur supported 
interrupt 13, then  die  
i have uncomment the object  irq_tables.o in file 
src/mainboard/artecgroup/dbe61/Options.lb

any advice would be appreciated!

_________________________________________________________________
免费下载 MSN Explorer:   http://explorer.msn.com/lccn

[Indrek Kruusa]

Ühel kenal päeval (neljapäev 01 veebruar 2007 4:44 am) kirjutas michal wan:
> 1 it looks ok running linuxbios and filo
> 2 loading kernel ok
>
> when  executing linux kernel, something occurs like "hda: lost interrupt"
>
> there are some problems which can be seen from the output of linux kernel
> 1  AMD5536: not 100% native mode: will probe irqs lalater
> 2 AMD5536: neither IDE port enabled (BIOS)

You don't have CS5536 properly configured for IDE.
grepping  MDD_PIN_OPT in source would help. This register is referred as 
DIVIL_BALL_OPT in CS5536's datasheet.
I suppose that in the future somebody will fix the source to match the 
datasheet.

cheers,
Indrek
> another problem is below
> in the function model_lx_init() from src/cpu/amd/model_lx/model_lx_init.c
> if umcomment setup_lapic() and vsm_end_post_smi(), it will occur supported
> interrupt 13, then  die
> i have uncomment the object  irq_tables.o in file
> src/mainboard/artecgroup/dbe61/Options.lb
>
> any advice would be appreciated!
>
> 免费下载 MSN Explorer:   http://explorer.msn.com/lccn