Hi everyone!
I'm trying to make an Elitegroup (ECS) board run coreboot. Model specifics are ECS C7VCM2 rev.1.0 with: - CN700 - VT8237R - ITE IT8716F-S - VIA C7 CPU @ 1000 MHz
The Homepage of the product is at:
http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=885&a...
Yet, i've tried booting a vanilla pc2500 coreboot with various payloads. The most i got it to do was outputting this line to the serial console: "Coreboot-2.0.0-pc2500e Fr 30. Jan 20:12:16 CET 2009 booting..." Actually, there was some garbage in front of that, but that got emitted on every powerup of the board (even without flash-chip). Afterwards the system just keeps emitting two barely audible clicks every 4 seconds (which it also does without flash).
Uwe tried helping with various suggestions (thanksalot!) but nothing really helped. So i'm posting here, maybe someone knows a solution.
Appended is the output of lspci -tvnn, superiotool, getpir, and mptable (as Uwe kindly suggested).
Thanks in advance,
Heiko
----- 8< ----- Attached board info ----- >8 -----
root@grml ~ # ./coreboot_diag.sh
------- lspci -tvnn output -------
-[0000:00]-+-00.0 VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge [1106:0314] +-00.1 VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge [1106:1314] +-00.2 VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge [1106:2314] +-00.3 VIA Technologies, Inc. PT890 Host Bridge [1106:3208] +-00.4 VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge [1106:4314] +-00.7 VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge [1106:7314] +-01.0-[0000:01]----00.0 VIA Technologies, Inc. UniChrome Pro IGP [1106:3344] +-0a.0 Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] +-0f.0 VIA Technologies, Inc. VIA VT6420 SATA RAID Controller [1106:3149] +-0f.1 VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] +-10.0 VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] +-10.1 VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] +-10.2 VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] +-10.3 VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] +-10.4 VIA Technologies, Inc. USB 2.0 [1106:3104] +-11.0 VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South] [1106:3227] -11.5 VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller [1106:3059]
------- superiotool output -------
superiotool r Probing for ALi Super I/O at 0x3f0... Failed. Returned data: id=0xffff, rev=0xff Probing for ALi Super I/O at 0x370... Failed. Returned data: id=0xffff, rev=0xff Probing for Fintek Super I/O at 0x2e... Failed. Returned data: vid=0xffff, id=0xffff Probing for Fintek Super I/O at 0x4e... Failed. Returned data: vid=0xffff, id=0xffff Probing for ITE Super I/O (init=standard) at 0x2e... Found ITE IT8716F (id=0x8716, rev=0x1) at 0x2e Register dump: idx 20 21 22 23 24 2b val 87 16 01 10 00 00 def 87 16 01 00 00 00 LDN 0x00 (Floppy) idx 30 60 61 70 74 f0 f1 val 00 00 00 00 04 00 80 def 00 03 f0 06 02 00 00 LDN 0x01 (COM1) idx 30 60 61 70 f0 f1 f2 f3 val 01 03 f8 04 00 50 00 7f def 00 03 f8 04 00 50 00 7f LDN 0x02 (COM2) idx 30 60 61 70 f0 f1 f2 f3 val 01 02 f8 03 00 50 00 7f def 00 02 f8 03 00 50 00 7f LDN 0x03 (Parallel port) idx 30 60 61 62 63 70 74 f0 val 01 03 78 00 00 07 04 08 def 00 03 78 07 78 07 03 03 LDN 0x04 (Environment controller) idx 30 60 61 62 63 70 f0 f1 f2 f3 f4 f5 f6 val 01 02 90 00 00 00 80 00 0a 00 80 00 ff def 00 02 90 02 30 09 00 00 00 00 00 NA NA LDN 0x05 (Keyboard) idx 30 60 61 62 63 70 71 f0 val 00 00 60 00 64 00 02 48 def 01 00 60 00 64 01 02 00 LDN 0x06 (Mouse) idx 30 70 71 f0 val 00 0c 02 00 def 00 0c 02 00 LDN 0x07 (GPIO) idx 25 26 27 28 29 2a 2c 60 61 62 63 64 65 70 71 72 73 74 b0 b1 b2 b3 b4 b5 b8 b9 ba bb bc bd c0 c1 c2 c3 c4 c8 c9 ca cb cc e0 e1 e2 e3 e4 f0 f1 f2 f3 f4 f5 f6 f7 f8 f9 fa fb fc fd val 00 03 00 00 28 80 1f 00 00 08 00 00 00 00 01 00 38 00 00 00 00 00 20 00 00 00 00 00 00 00 00 ff 00 00 00 00 00 00 00 28 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00 3f 00 def 01 00 00 40 00 00 00 00 00 00 00 00 00 00 00 20 38 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00 40 00 01 00 00 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 NA 00 LDN 0x08 (MIDI port) idx 30 60 61 70 f0 val 00 03 00 0a 00 def 00 03 00 0a 00 LDN 0x09 (Game port) idx 30 60 61 val 00 02 01 def 00 02 01 LDN 0x0a (Consumer IR) idx 30 60 61 70 f0 val 00 03 10 0b 06 def 00 03 10 0b 00 Probing for ITE Super I/O (init=it8761e) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8228e) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=0x87,0x87) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=standard) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8761e) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8228e) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=0x87,0x87) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=legacy/it8661f) at 0x370... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=legacy/it8671f) at 0x370... Failed. Returned data: id=0xffff, rev=0xf Probing for NSC Super I/O at 0x2e... Failed. Returned data: port=0xff, port+1=0xff Probing for NSC Super I/O at 0x4e... Failed. Returned data: port=0xff, port+1=0xff Probing for NSC Super I/O at 0x15c... Failed. Returned data: port=0xff, port+1=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x2e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x2e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x4e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x4e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x162e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x162e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x164e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x164e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x3f0... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x3f0... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x370... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x370... Failed. Returned data: id=0xff, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
------- getpir output -------
Probing PIRQ table in memory. Found PCI IRQ routing table signature at 0xfcd30. Validating... checksum is wrong. Creating irq_tables.c ... Done, you can move the file to the coreboot tree now.
------- getpir generated irq_tables.c -------
/* This file was generated by getpir.c, do not modify! * (but if you do, please run checkpir on it to verify) * * Contains the IRQ Routing Table dumped directly from your * memory, which BIOS sets up. * * Documentation at: http://www.microsoft.com/whdc/archive/pciirq.mspx */
#ifdef GETPIR #include "pirq_routing.h" #else #include <arch/pirq_routing.h> #endif
const struct irq_routing_table intel_irq_routing_table = { PIRQ_SIGNATURE, /* u32 signature */ PIRQ_VERSION, /* u16 version */ 32+16*6, /* There can be total 6 devices on the bus */ 0x00, /* Where the interrupt router lies (bus) */ (0x11<<3)|0x0, /* Where the interrupt router lies (dev) */ 0xc20, /* IRQs devoted exclusively to PCI usage */ 0x1106, /* Vendor */ 0x596, /* Device */ 0, /* Miniport */ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ 0xcc, /* u8 checksum. This has to be set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ { /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ {0x00,(0x08<<3)|0x0, {{0x01, 0xdef8}, {0x02, 0xdef8}, {0x03, 0xdef8}, {0x05, 0xdef8}}, 0x1, 0x0}, {0x00,(0x0a<<3)|0x0, {{0x02, 0xdef8}, {0x03, 0xdef8}, {0x05, 0xdef8}, {0x01, 0xdef8}}, 0x2, 0x0}, {0x00,(0x11<<3)|0x0, {{0x00, 0xdef8}, {0x00, 0xdef8}, {0x03, 0xdef8}, {0x05, 0xdef8}}, 0x0, 0x0}, {0x00,(0x0f<<3)|0x0, {{0x01, 0xdef8}, {0x02, 0xdef8}, {0x03, 0xdef8}, {0x05, 0xdef8}}, 0x0, 0x0}, {0x00,(0x01<<3)|0x0, {{0x01, 0xdef8}, {0x02, 0xdef8}, {0x03, 0xdef8}, {0x05, 0xdef8}}, 0x0, 0x0}, {0x00,(0x10<<3)|0x0, {{0x01, 0xdef8}, {0x02, 0xdef8}, {0x03, 0xdef8}, {0x05, 0xdef8}}, 0x0, 0x0}, } };
unsigned long write_pirq_routing_table(unsigned long addr) { return copy_pirq_routing_table(addr); }
------- mptable output -------
/* generated by MPTable, version 2.0.15*/ /* as modified by RGM for coreboot */ #include <console/console.h> #include <arch/smp/mpspec.h> #include <device/pci.h> #include <string.h> #include <stdint.h>
void *smp_write_config_table(void *v) { static const char sig[4] = "PCMP"; static const char oem[8] = "LNXI "; static const char productid[12] = "P4DPE "; struct mp_config_table *mc;
mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); memset(mc, 0, sizeof(*mc));
memcpy(mc->mpc_signature, sig, sizeof(sig)); mc->mpc_length = sizeof(*mc); /* initially just the header */ mc->mpc_spec = 0x04; mc->mpc_checksum = 0; /* not yet computed */ memcpy(mc->mpc_oem, oem, sizeof(oem)); memcpy(mc->mpc_productid, productid, sizeof(productid)); mc->mpc_oemptr = 0; mc->mpc_oemsize = 0; mc->mpc_entry_count = 0; /* No entries yet... */ mc->mpc_lapic = LAPIC_ADDR; mc->mpe_length = 0; mc->mpe_checksum = 0; mc->reserved = 0;
smp_write_processors(mc);
/*Bus: Bus ID Type*/ smp_write_bus(mc, 0, "PCI "); smp_write_bus(mc, 1, "PCI "); smp_write_bus(mc, 2, "ISA "); /*I/O APICs: APIC ID Version State Address*/ smp_write_ioapic(mc, 2, 0x20, 0xfec00000); { device_t dev; struct resource *res; dev = dev_find_slot(1, PCI_DEVFN(0x1e,0)); if (dev) { res = find_resource(dev, PCI_BASE_ADDRESS_0); if (res) { smp_write_ioapic(mc, 3, 0x20, res->base); } } dev = dev_find_slot(1, PCI_DEVFN(0x1c,0)); if (dev) { res = find_resource(dev, PCI_BASE_ADDRESS_0); if (res) { smp_write_ioapic(mc, 4, 0x20, res->base); } } dev = dev_find_slot(4, PCI_DEVFN(0x1e,0)); if (dev) { res = find_resource(dev, PCI_BASE_ADDRESS_0); if (res) { smp_write_ioapic(mc, 5, 0x20, res->base); } } dev = dev_find_slot(4, PCI_DEVFN(0x1c,0)); if (dev) { res = find_resource(dev, PCI_BASE_ADDRESS_0); if (res) { smp_write_ioapic(mc, 8, 0x20, res->base); } } } /*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x40, 0x2, 0x15); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x40, 0x2, 0x15); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x41, 0x2, 0x15); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x41, 0x2, 0x15); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x42, 0x2, 0x15); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x46, 0x2, 0x16); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x1, 0x0, 0x2, 0x10); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x28, 0x2, 0x11); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x3d, 0x2, 0x14); smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, 0x2, 0x0, 0x2, 0x0); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, 0x2, 0x1, 0x2, 0x1); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, 0x2, 0x0, 0x2, 0x2); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, 0x2, 0x3, 0x2, 0x3); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, 0x2, 0x4, 0x2, 0x4); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, 0x2, 0x6, 0x2, 0x6); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, 0x2, 0x7, 0x2, 0x7); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x2, 0x8, 0x2, 0x8); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, 0x2, 0x9, 0x2, 0x9); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, 0x2, 0xc, 0x2, 0xc); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, 0x2, 0xd, 0x2, 0xd); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, 0x2, 0xe, 0x2, 0xe); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, 0x2, 0xf, 0x2, 0xf); /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, 0x0, 0x0, MP_APIC_ALL, 0x0); smp_write_intsrc(mc, mp_NMI, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, 0x0, 0x0, MP_APIC_ALL, 0x1); /* There is no extension information... */
/* Compute the checksums */ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); printk_debug("Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); }
unsigned long write_smp_table(unsigned long addr) { void *v; v = smp_write_floating_table(addr); return (unsigned long)smp_write_config_table(v); } root@grml ~ #
Heiko Weinen wrote:
Hi everyone!
I'm trying to make an Elitegroup (ECS) board run coreboot. Model specifics are ECS C7VCM2 rev.1.0 with:
- CN700
- VT8237R
- ITE IT8716F-S
- VIA C7 CPU @ 1000 MHz
The Homepage of the product is at:
http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=885&a...
Yet, i've tried booting a vanilla pc2500 coreboot with various payloads. The most i got it to do was outputting this line to the serial console: "Coreboot-2.0.0-pc2500e Fr 30. Jan 20:12:16 CET 2009 booting..." Actually, there was some garbage in front of that, but that got emitted on every powerup of the board (even without flash-chip). Afterwards the system just keeps emitting two barely audible clicks every 4 seconds (which it also does without flash).
Uwe tried helping with various suggestions (thanksalot!) but nothing really helped. So i'm posting here, maybe someone knows a solution.
I have a couple of these. I'll take a look when I get a chance and let you know what I find. The factory BIOS is one of the slowest booting I have seen in >10 years.
-Bari
On Tue, Feb 24, 2009 at 08:01:38PM -0600, bari wrote:
Heiko Weinen wrote:
Hi everyone!
I'm trying to make an Elitegroup (ECS) board run coreboot. Model specifics are ECS C7VCM2 rev.1.0 with:
[..]
I have a couple of these. I'll take a look when I get a chance and let you know what I find. The factory BIOS is one of the slowest booting I have seen in >10 years.
Thats exactly the reason why i'm trying to run coreboot on them. A boot takes ages with the original bios.
Any news on the matter?
Cheers,
Heiko
-
bari -
Heiko Weinen -
heikoļ¼ fedev.eu