[Broadwell-DE] camelbackmountain_fsp project hang 7a/95

[James_Lee]

Hello All,

My platform is Intel camelback CRB, I use coreboot +intel FSP,

But hang on 7a or 95, please see below log, and attach .config,

I have enable serial irq conutine mode, have some guys know

the root cause? Thanks.

Best Regards

-James

Hide devices in Bus:255

Notify: PPI Guid: 30CFE3E7-3DE1-4586-BE20-DEABA1B3B793, Peim notify entry
point: 7F7417E7

FSP Notification Handler Returns : 0x00000000

FSP Got Notification. Notification Value : 0x00000040

FSP Ready To Boot ...

Install PPI: 7CE88FB3-4BD7-4679-87A8-A8D8DEE50D2B

Notify: PPI Guid: 7CE88FB3-4BD7-4679-87A8-A8D8DEE50D2B, Peim notify entry
point: 7F7966F7

Notify: PPI Guid: 7CE88FB3-4BD7-4679-87A8-A8D8DEE50D2B, Peim notify entry
point: 7F79991A

IioLateInitialize ReadyToBoot Callback

OnExitBootServices..

IioInit Late Secure the Platform (TXT)..

Notify: PPI Guid: 7CE88FB3-4BD7-4679-87A8-A8D8DEE50D2B, Peim notify entry
point: 7F766B1E

Hiding ME Devices

Notify: PPI Guid: 7CE88FB3-4BD7-4679-87A8-A8D8DEE50D2B, Peim notify entry
point: 7F7727C4

MP ReadyToBootEvent()

:: Set LOCK bit in PACKAGE_RAPL_LIMIT with value = 80078150

:: Set LOCK bit in CSR_SAPMCTL with value = B8002024

:: Set LOCK bit in CSR_DRAM_PLANE_POWER_LIMIT with value = 80000000

:: Set LOCK bit in P_STATE_LIMITS_PCU_FUN0_REG with value = 800000FF

:: Set LOCK bit in CSR_DESIRED_CORES_PCU_FUN1_REG with value = 80000000

Done Write MAILBOX_BIOS_CMD_WRITE_PCU_MISC_CONFIG, data = 800002, SETUP
Pl2SafetyNetEnable = 1

:: Read BIOS_MAILBOX_DATA_PCU_FUN1_REG back, data = 800002

:: Debug PpmSetBiosInitDone Read Data: 00000606

Detected 16 CPU threads

Notify: PPI Guid: 7CE88FB3-4BD7-4679-87A8-A8D8DEE50D2B, Peim notify entry
point: 7F7190F5

PciERWORegInit() Start

PciERWORegInit() End

ThermalLockDown() Start

ThermalLockdown() - ThermalBaseB = 00000004

ThermalBaseB not set!!

BDX-DE MCP PMSYNC enable = 1

InstallPchThermalLevelsProtocol()

ASSERT DUMP:

-> EBP:0x7F0FDE60  EIP:0x7F719305

-> EBP:0x7F0FDEBC  EIP:0x7F718D2D

-> EBP:0x7F0FDEF4  EIP:0x7F7190FD

-> EBP:0x7F0FDF30  EIP:0x7F7FA29B

-> EBP:0x7F0FDF5C  EIP:0x7F7F309B

-> EBP:0x7F0FDF84  EIP:0x7F7F2DC9

-> EBP:0x7F0FE8EC  EIP:0xFFEB2239

-> EBP:0x7F0FF24C  EIP:0xFFEB5584

[Yang, York]

> From the log, it looks like hang in FSP.  What version of FSP did you use.  Are you using U-0 stepping CPU?

You may want to enable the "Configure defaults for the Intel FSP package" in menuconfig\Mainboard menu.

/ YoRK

From: coreboot [mailto:[e-mail]] On Behalf Of James_Lee
Sent: Wednesday, October 19, 2016 3:59 AM
To: [e-mail]
Subject: [coreboot] [Broadwell-DE] camelbackmountain_fsp project hang 7a/95

Hello All,
   My platform is Intel camelback CRB, I use coreboot +intel FSP,
But hang on 7a or 95, please see below log, and attach .config,
I have enable serial irq conutine mode, have some guys know
the root cause? Thanks.

Best Regards
-James

Hide devices in Bus:255
Notify: PPI Guid: 30CFE3E7-3DE1-4586-BE20-DEABA1B3B793, Peim notify entry point: 7F7417E7
FSP Notification Handler Returns : 0x00000000
FSP Got Notification. Notification Value : 0x00000040
FSP Ready To Boot ...
Install PPI: 7CE88FB3-4BD7-4679-87A8-A8D8DEE50D2B
Notify: PPI Guid: 7CE88FB3-4BD7-4679-87A8-A8D8DEE50D2B, Peim notify entry point: 7F7966F7
Notify: PPI Guid: 7CE88FB3-4BD7-4679-87A8-A8D8DEE50D2B, Peim notify entry point: 7F79991A
IioLateInitialize ReadyToBoot Callback
OnExitBootServices..
IioInit Late Secure the Platform (TXT)..
Notify: PPI Guid: 7CE88FB3-4BD7-4679-87A8-A8D8DEE50D2B, Peim notify entry point: 7F766B1E
Hiding ME Devices
Notify: PPI Guid: 7CE88FB3-4BD7-4679-87A8-A8D8DEE50D2B, Peim notify entry point: 7F7727C4
MP ReadyToBootEvent()
:: Set LOCK bit in PACKAGE_RAPL_LIMIT with value = 80078150
:: Set LOCK bit in CSR_SAPMCTL with value = B8002024
:: Set LOCK bit in CSR_DRAM_PLANE_POWER_LIMIT with value = 80000000
:: Set LOCK bit in P_STATE_LIMITS_PCU_FUN0_REG with value = 800000FF
:: Set LOCK bit in CSR_DESIRED_CORES_PCU_FUN1_REG with value = 80000000

Done Write MAILBOX_BIOS_CMD_WRITE_PCU_MISC_CONFIG, data = 800002, SETUP Pl2SafetyNetEnable = 1
:: Read BIOS_MAILBOX_DATA_PCU_FUN1_REG back, data = 800002
:: Debug PpmSetBiosInitDone Read Data: 00000606

Detected 16 CPU threads
Notify: PPI Guid: 7CE88FB3-4BD7-4679-87A8-A8D8DEE50D2B, Peim notify entry point: 7F7190F5
PciERWORegInit() Start
PciERWORegInit() End
ThermalLockDown() Start
ThermalLockdown() - ThermalBaseB = 00000004
ThermalBaseB not set!!
BDX-DE MCP PMSYNC enable = 1
InstallPchThermalLevelsProtocol()
ASSERT DUMP:
-> EBP:0x7F0FDE60  EIP:0x7F719305
-> EBP:0x7F0FDEBC  EIP:0x7F718D2D
-> EBP:0x7F0FDEF4  EIP:0x7F7190FD
-> EBP:0x7F0FDF30  EIP:0x7F7FA29B
-> EBP:0x7F0FDF5C  EIP:0x7F7F309B
-> EBP:0x7F0FDF84  EIP:0x7F7F2DC9
-> EBP:0x7F0FE8EC  EIP:0xFFEB2239
-> EBP:0x7F0FF24C  EIP:0xFFEB5584