New patch to review for coreboot: 37e4516 Added RAMINIT_SYSINFO. Also re-generated irq_tables.c
Oskar Enoksson (enok@lysator.liu.se) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/236
-gerrit
commit 37e4516ea19db743daa0142ea00933586100bea5 Author: Oskar Enoksson enok@lysator.liu.se Date: Tue Oct 4 16:31:20 2011 +0200
Added RAMINIT_SYSINFO. Also re-generated irq_tables.c
Signed-off-by: enok71 enok@lysator.liu.se Change-Id: Ie90a134a1efc9605b3fe17a5b5008856226984be --- src/mainboard/hp/dl145_g1/Kconfig | 1 + src/mainboard/hp/dl145_g1/get_bus_conf.c | 55 ++++----- src/mainboard/hp/dl145_g1/irq_tables.c | 148 ++++++++----------------- src/mainboard/hp/dl145_g1/mb_sysconf.h | 33 ++++++ src/mainboard/hp/dl145_g1/mptable.c | 37 +++---- src/mainboard/hp/dl145_g1/romstage.c | 177 +++++++++++++++--------------- 6 files changed, 208 insertions(+), 243 deletions(-)
diff --git a/src/mainboard/hp/dl145_g1/Kconfig b/src/mainboard/hp/dl145_g1/Kconfig index eb90b07..ebd7ffd 100644 --- a/src/mainboard/hp/dl145_g1/Kconfig +++ b/src/mainboard/hp/dl145_g1/Kconfig @@ -15,6 +15,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy select HAVE_PIRQ_TABLE select HAVE_MP_TABLE select BOARD_ROMSIZE_KB_512 + select RAMINIT_SYSINFO # select SB_HT_CHAIN_UNITID_OFFSET_ONLY select QRANK_DIMM_SUPPORT
diff --git a/src/mainboard/hp/dl145_g1/get_bus_conf.c b/src/mainboard/hp/dl145_g1/get_bus_conf.c index e4721ce..8fb52bd 100644 --- a/src/mainboard/hp/dl145_g1/get_bus_conf.c +++ b/src/mainboard/hp/dl145_g1/get_bus_conf.c @@ -9,20 +9,12 @@
#include <cpu/amd/amdk8_sysconf.h> #include <stdlib.h> - +#include "mb_sysconf.h"
// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables -//busnum is default -unsigned char bus_8131_0 = 1; -unsigned char bus_8131_1 = 2; -unsigned char bus_8131_2 = 3; -unsigned char bus_8111_0 = 1; -unsigned char bus_8111_1 = 4; -unsigned apicid_8111 ; -unsigned apicid_8131_1; -unsigned apicid_8131_2; - -unsigned pci1234x[] = +struct mb_sysconf_t mb_sysconf; + +static unsigned pci1234x[] = { //Here you only need to set value in pci1234 for HT-IO that could be installed or not //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail 0x0000ff0, @@ -34,7 +26,7 @@ unsigned pci1234x[] = // 0x0000ff0, // 0x0000ff0 }; -unsigned hcdnx[] = +static unsigned hcdnx[] = { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most 0x20202020, // 0x20202020, @@ -45,8 +37,6 @@ unsigned hcdnx[] = // 0x20202020, // 0x20202020, }; -unsigned sbdn3; -
static unsigned get_bus_conf_done = 0; @@ -58,11 +48,16 @@ void get_bus_conf(void)
device_t dev; int i; + struct mb_sysconf_t *m;
if(get_bus_conf_done==1) return; //do it only once
get_bus_conf_done = 1;
+ sysconf.mb = &mb_sysconf; + + m = sysconf.mb; + sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); for(i=0;i<sysconf.hc_possible_num; i++) { sysconf.pci1234[i] = pci1234x[i]; @@ -72,36 +67,36 @@ void get_bus_conf(void) get_sblk_pci1234();
sysconf.sbdn = (sysconf.hcdn[0] >> 8) & 0xff; - sbdn3 = sysconf.hcdn[0] & 0xff; + m->sbdn3 = sysconf.hcdn[0] & 0xff;
- bus_8131_0 = (sysconf.pci1234[0] >> 16) & 0xff; - bus_8111_0 = bus_8131_0; + m->bus_8131_0 = (sysconf.pci1234[0] >> 16) & 0xff; + m->bus_8111_0 = m->bus_8131_0;
/* 8111 */ - dev = dev_find_slot(bus_8111_0, PCI_DEVFN(sysconf.sbdn,0)); + dev = dev_find_slot(m->bus_8111_0, PCI_DEVFN(sysconf.sbdn,0)); if (dev) { - bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); + m->bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); } else { - printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:03.0, using defaults\n", bus_8111_0); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:03.0, using defaults\n", m->bus_8111_0); }
/* 8131-1 */ - dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3,0)); + dev = dev_find_slot(m->bus_8131_0, PCI_DEVFN(m->sbdn3,0)); if (dev) { - bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); + m->bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); } else { - printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:01.0, using defaults\n", bus_8131_0); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:01.0, using defaults\n", m->bus_8131_0); }
/* 8132-2 */ - dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3+1,0)); + dev = dev_find_slot(m->bus_8131_0, PCI_DEVFN(m->sbdn3+1,0)); if (dev) { - bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); + m->bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); } else { - printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:02.0, using defaults\n", bus_8131_0); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:02.0, using defaults\n", m->bus_8131_0); }
@@ -111,7 +106,7 @@ void get_bus_conf(void) #else apicid_base = CONFIG_MAX_PHYSICAL_CPUS; #endif - apicid_8111 = apicid_base+0; - apicid_8131_1 = apicid_base+1; - apicid_8131_2 = apicid_base+2; + m->apicid_8111 = apicid_base+0; + m->apicid_8131_1 = apicid_base+1; + m->apicid_8131_2 = apicid_base+2; } diff --git a/src/mainboard/hp/dl145_g1/irq_tables.c b/src/mainboard/hp/dl145_g1/irq_tables.c index b53a992..cd5e5a7 100644 --- a/src/mainboard/hp/dl145_g1/irq_tables.c +++ b/src/mainboard/hp/dl145_g1/irq_tables.c @@ -1,107 +1,55 @@ -/* This file was generated by getpir.c, do not modify! - (but if you do, please run checkpir on it to verify) - Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Oskar Enoksson enok@lysator.liu.se + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */
- Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM -*/ -#include <console/console.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> #include <arch/pirq_routing.h>
-#include <cpu/amd/amdk8_sysconf.h> - -static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, - uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3, - uint8_t slot, uint8_t rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} - -extern unsigned char bus_8131_0; -extern unsigned char bus_8131_1; -extern unsigned char bus_8131_2; -extern unsigned char bus_8111_0; -extern unsigned char bus_8111_1; - -extern unsigned sbdn3; - - +const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, /* u32 signature */ + PIRQ_VERSION, /* u16 version */ + 32 + 16 * 9, /* Max. number of devices on the bus */ + 0x00, /* Interrupt router bus */ + (0x07 << 3) | 0x3, /* Interrupt router dev */ + 0, /* IRQs devoted exclusively to PCI usage */ + 0x1022, /* Vendor */ + 0x746b, /* Device */ + 0, /* Miniport */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ + 0x2d, /* Checksum (has to be set to some value that + * would give 0 after the sum of all bytes + * for this structure (including checksum). + */ + { + /* bus, dev | fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ + {0x00, (0x07 << 3) | 0x0, {{0x01, 0xdef8}, {0x02, 0xdef8}, {0x03, 0xdef8}, {0x04, 0xdef8}}, 0x0, 0x0}, + {0x01, (0x00 << 3) | 0x0, {{0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x0000}, {0x04, 0xdef8}}, 0x0, 0x0}, + {0x01, (0x01 << 3) | 0x0, {{0x01, 0xdef8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x0000}}, 0x0, 0x0}, + {0x03, (0x01 << 3) | 0x0, {{0x02, 0xdef8}, {0x03, 0xdef8}, {0x04, 0xdef8}, {0x01, 0xdef8}}, 0x2, 0x0}, + {0x03, (0x02 << 3) | 0x0, {{0x03, 0xdef8}, {0x04, 0xdef8}, {0x01, 0xdef8}, {0x02, 0xdef8}}, 0x4, 0x0}, + {0x01, (0x04 << 3) | 0x0, {{0x01, 0xdef8}, {0x02, 0xdef8}, {0x03, 0xdef8}, {0x04, 0xdef8}}, 0x1, 0x0}, + {0x02, (0x03 << 3) | 0x0, {{0x04, 0xdef8}, {0x01, 0xdef8}, {0x00, 0x0000}, {0x00, 0x0000}}, 0x0, 0x0}, + {0x02, (0x01 << 3) | 0x0, {{0x02, 0xdef8}, {0x03, 0xdef8}, {0x00, 0x0000}, {0x00, 0x0000}}, 0x0, 0x0}, + {0x03, (0x03 << 3) | 0x0, {{0x04, 0xdef8}, {0x01, 0xdef8}, {0x02, 0xdef8}, {0x03, 0xdef8}}, 0x3, 0x0}, + } +};
unsigned long write_pirq_routing_table(unsigned long addr) { - - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - unsigned slot_num; - uint8_t *v; - - uint8_t sum=0; - int i; - - get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be betweeen 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (uint8_t *)(addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = bus_8111_0; - pirq->rtr_devfn = ((sysconf.sbdn+1)<<3)|0; - - pirq->exclusive_irqs = 0; - - pirq->rtr_vendor = 0x1022; - pirq->rtr_device = 0x746b; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *) ( &pirq->checksum + 1); - slot_num = 0; -//pci bridge - write_pirq_info(pirq_info, bus_8111_0, ((sysconf.sbdn+1)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); - pirq_info++; slot_num++; -//pcix bridge -// write_pirq_info(pirq_info, bus_8131_0, (sbdn3<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); -// pirq_info++; slot_num++; - - pirq_info++; slot_num++; - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - printk(BIOS_INFO, "done.\n"); - - return (unsigned long) pirq_info; - + return copy_pirq_routing_table(addr); } diff --git a/src/mainboard/hp/dl145_g1/mb_sysconf.h b/src/mainboard/hp/dl145_g1/mb_sysconf.h new file mode 100644 index 0000000..aecd9b6 --- /dev/null +++ b/src/mainboard/hp/dl145_g1/mb_sysconf.h @@ -0,0 +1,33 @@ +#ifndef MB_SYSCONF_H + +#define MB_SYSCONF_H + +// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables +//busnum is default +/* +unsigned char bus_8131_0 = 1; +unsigned char bus_8131_1 = 2; +unsigned char bus_8131_2 = 3; +unsigned char bus_8111_0 = 1; +unsigned char bus_8111_1 = 4; +unsigned apicid_8111 ; +unsigned apicid_8131_1; +unsigned apicid_8131_2; +unsigned sbdn3; +*/ +struct mb_sysconf_t { + unsigned char bus_8131_0; + unsigned char bus_8131_1; + unsigned char bus_8131_2; + unsigned char bus_8111_0; + unsigned char bus_8111_1; + + unsigned apicid_8111; + unsigned apicid_8131_1; + unsigned apicid_8131_2; + + unsigned sbdn3; +}; + +#endif + diff --git a/src/mainboard/hp/dl145_g1/mptable.c b/src/mainboard/hp/dl145_g1/mptable.c index 3cd9fd6..d8b1a6a 100644 --- a/src/mainboard/hp/dl145_g1/mptable.c +++ b/src/mainboard/hp/dl145_g1/mptable.c @@ -5,22 +5,13 @@ #include <string.h> #include <stdint.h> #include <cpu/amd/amdk8_sysconf.h> - -extern unsigned char bus_8131_0; -extern unsigned char bus_8131_1; -extern unsigned char bus_8131_2; -extern unsigned char bus_8111_0; -extern unsigned char bus_8111_1; -extern unsigned apicid_8111; -extern unsigned apicid_8131_1; -extern unsigned apicid_8131_2; - -extern unsigned sbdn3; +#include "mb_sysconf.h"
static void *smp_write_config_table(void *v) { struct mp_config_table *mc; int bus_isa; + struct mb_sysconf_t *m;
mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
@@ -30,31 +21,33 @@ static void *smp_write_config_table(void *v)
get_bus_conf();
+ m = sysconf.mb; + mptable_write_buses(mc, NULL, &bus_isa);
/*I/O APICs: APIC ID Version State Address*/ - smp_write_ioapic(mc, apicid_8111, 0x20, IO_APIC_ADDR); + smp_write_ioapic(mc, m->apicid_8111, 0x20, IO_APIC_ADDR); { device_t dev; struct resource *res; - dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3,1)); + dev = dev_find_slot(m->bus_8131_0, PCI_DEVFN(m->sbdn3,1)); if (dev) { res = find_resource(dev, PCI_BASE_ADDRESS_0); if (res) { - smp_write_ioapic(mc, apicid_8131_1, 0x20, res->base); + smp_write_ioapic(mc, m->apicid_8131_1, 0x20, res->base); } } - dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3+1,1)); + dev = dev_find_slot(m->bus_8131_0, PCI_DEVFN(m->sbdn3+1,1)); if (dev) { res = find_resource(dev, PCI_BASE_ADDRESS_0); if (res) { - smp_write_ioapic(mc, apicid_8131_2, 0x20, res->base); + smp_write_ioapic(mc, m->apicid_8131_2, 0x20, res->base); } }
}
- mptable_add_isa_interrupts(mc, bus_isa, apicid_8111, 0); + mptable_add_isa_interrupts(mc, bus_isa, m->apicid_8111, 0);
// // The commented-out lines are auto-detected on my servers. @@ -66,18 +59,18 @@ static void *smp_write_config_table(void *v) //smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_0, ( 0x4 <<2)|1, apicid_8111 , 0x11); //smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_0, ( 0x4 <<2)|2, apicid_8111 , 0x12); // Integrated AMD USB - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, ( 0x4 <<2)|0, apicid_8111 , 0x10); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, ( 0x0 <<2)|3, apicid_8111 , 0x13); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8111_1, ( 0x4 <<2)|0, m->apicid_8111 , 0x10); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8111_1, ( 0x0 <<2)|3, m->apicid_8111 , 0x13); // On board ATI Rage XL //smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, ( 0x5 <<2)|0, apicid_8111 , 0x14); // On board Broadcom nics - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, ( 0x3 <<2)|0, apicid_8131_2, 0x03); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, ( 0x3 <<2)|1, apicid_8131_2, 0x00); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8131_2, ( 0x3 <<2)|0, m->apicid_8131_2, 0x03); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8131_2, ( 0x3 <<2)|1, m->apicid_8131_2, 0x00); // On board LSI SCSI //smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, ( 0x2 <<2)|0, apicid_8131_2, 0x02);
// PCIX-133 Slot - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, ( 0x1 <<2)|0, apicid_8131_1, 0x01); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8131_1, ( 0x1 <<2)|0, m->apicid_8131_1, 0x01); //smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, ( 0x1 <<2)|1, apicid_8131_1, 0x02); //smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, ( 0x1 <<2)|2, apicid_8131_1, 0x03); //smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, ( 0x1 <<2)|3, apicid_8131_1, 0x04); diff --git a/src/mainboard/hp/dl145_g1/romstage.c b/src/mainboard/hp/dl145_g1/romstage.c index f51b4c4..7c34ff9 100644 --- a/src/mainboard/hp/dl145_g1/romstage.c +++ b/src/mainboard/hp/dl145_g1/romstage.c @@ -1,17 +1,17 @@ #include <stdint.h> #include <string.h> #include <device/pci_def.h> +#include <device/pci_ids.h> #include <arch/io.h> #include <device/pnp_def.h> #include <arch/romcc_io.h> #include <pc80/mc146818rtc.h> #include <console/console.h> #include <cpu/amd/model_fxx_rev.h> -#include "northbridge/amd/amdk8/incoherent_ht.c" +#include "northbridge/amd/amdk8/amdk8.h" #include "southbridge/amd/amd8111/early_smbus.c" #include "northbridge/amd/amdk8/raminit.h" #include "cpu/amd/model_fxx/apic_timer.c" -#include "lib/delay.c" #include "northbridge/amd/amdk8/reset_test.c" #include "northbridge/amd/amdk8/debug.c" #include "superio/winbond/w83627hf/early_serial.c" @@ -23,53 +23,45 @@
static void memreset_setup(void) { - if (is_cpu_pre_c0()) { - /* Set the memreset low. */ - outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); - /* Ensure the BIOS has control of the memory lines. */ - outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17); - } else { - /* Ensure the CPU has control of the memory lines. */ - outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); - } + if (is_cpu_pre_c0()) { + // Set the memreset low. + outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); + // Ensure the BIOS has control of the memory lines. + outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17); + } else { + // Ensure the CPU has control of the memory lines. + outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); + } }
static void memreset(int controllers, const struct mem_controller *ctrl) { - if (is_cpu_pre_c0()) { - udelay(800); - /* Set memreset high. */ - outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); - udelay(90); - } + if (is_cpu_pre_c0()) { + udelay(800); + // Set memreset high. + outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); + udelay(90); + } }
#define SMBUS_HUB 0x18
-static inline void activate_spd_rom(const struct mem_controller *ctrl) +static inline void change_i2c_mux(unsigned device) { - int ret,i; - unsigned device=(ctrl->channel0[0])>>8; - /* the very first write always get COL_STS=1 and ABRT_STS=1, so try another time*/ - i=2; - do { - ret = smbus_write_byte(SMBUS_HUB, 0x01, device); - } while ((ret!=0) && (i-->0)); - - smbus_write_byte(SMBUS_HUB, 0x03, 0); + int ret, i; + print_debug("change_i2c_mux i="); print_debug_hex8(device); print_debug("\n"); + i=2; + do { + ret = smbus_write_byte(SMBUS_HUB, 0x01, device); + print_debug("change_i2c_mux 1 ret="); print_debug_hex32(ret); print_debug("\n"); + } while ((ret!=0) && (i-->0)); + ret = smbus_write_byte(SMBUS_HUB, 0x03, 0); + print_debug("change_i2c_mux 2 ret="); print_debug_hex32(ret); print_debug("\n"); }
-static inline void change_i2c_mux(unsigned device) +static inline void activate_spd_rom(const struct mem_controller *ctrl) { - int ret, i; - print_debug("change_i2c_mux i="); print_debug_hex8(device); print_debug("\n"); - i=2; - do { - ret = smbus_write_byte(SMBUS_HUB, 0x01, device); - print_debug("change_i2c_mux 1 ret="); print_debug_hex32(ret); print_debug("\n"); - } while ((ret!=0) && (i-->0)); - ret = smbus_write_byte(SMBUS_HUB, 0x03, 0); - print_debug("change_i2c_mux 2 ret="); print_debug_hex32(ret); print_debug("\n"); + change_i2c_mux(ctrl->channel0[0]>>8); }
static inline int spd_read_byte(unsigned device, unsigned address) @@ -77,6 +69,7 @@ static inline int spd_read_byte(unsigned device, unsigned address) return smbus_read_byte(device, address); }
+#include "northbridge/amd/amdk8/incoherent_ht.c" #include "northbridge/amd/amdk8/raminit.c" #include "resourcemap.c" #include "northbridge/amd/amdk8/coherent_ht.c" @@ -86,78 +79,80 @@ static inline int spd_read_byte(unsigned device, unsigned address) #include "cpu/amd/car/post_cache_as_ram.c" #include "cpu/amd/model_fxx/init_cpus.c"
-#define RC0 ((1<<1)<<8) // Not sure about these values -#define RC1 ((1<<2)<<8) // Not sure about these values - void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { - static const uint16_t spd_addr [] = { - //first node - RC0|DIMM0, RC0|DIMM2, 0, 0, - RC0|DIMM1, RC0|DIMM3, 0, 0, -#if CONFIG_MAX_PHYSICAL_CPUS > 1 - //second node - RC1|DIMM0, RC1|DIMM2, 0, 0, - RC1|DIMM1, RC1|DIMM3, 0, 0, -#endif - }; - - int needs_reset; - unsigned bsp_apicid = 0, nodes; - struct mem_controller ctrl[8]; + struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE); + int needs_reset = 0; + unsigned bsp_apicid = 0;
- if (bist == 0) - bsp_apicid = init_cpus(cpu_init_detectedx); + if (bist == 0) + bsp_apicid = init_cpus(cpu_init_detectedx,sysinfo);
w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); + console_init();
/* Halt if there was a built in self test failure */ report_bist_failure(bist);
+ printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1); + setup_dl145g1_resource_map(); //setup_default_resource_map();
- needs_reset = setup_coherent_ht_domain(); - - wait_all_core0_started(); +#if CONFIG_MEM_TRAIN_SEQ == 1 + set_sysinfo_in_ram(0); // in BSP so could hold all ap until sysinfo is in ram +#endif + setup_coherent_ht_domain(); + wait_all_core0_started(); #if CONFIG_LOGICAL_CPUS==1 - // It is said that we should start core1 after all core0 launched - start_other_cores(); - wait_all_other_cores_started(bsp_apicid); + // It is said that we should start core1 after all core0 launched + start_other_cores(); + wait_all_other_cores_started(bsp_apicid); #endif + ht_setup_chains_x(sysinfo);
- needs_reset |= ht_setup_chains_x(); - - if (needs_reset) { - print_info("ht reset -\n"); - soft_reset(); - } - - enable_smbus(); - - int i; - for(i=0;i<2;i++) { - activate_spd_rom(&ctrl[i]); - } - for(i=2;i<8;i<<=1) { - change_i2c_mux(i); + needs_reset |= optimize_link_coherent_ht(); + needs_reset |= optimize_link_incoherent_ht(sysinfo); + if (needs_reset) { + print_info("ht reset -\n"); + soft_reset_x(sysinfo->sbbusn, sysinfo->sbdn); }
- //dump_spd_registers(&ctrl[0]); - //dump_spd_registers(&ctrl[1]); - //dump_smbus_registers(); - - allow_all_aps_stop(bsp_apicid); - - nodes = get_nodes(); - //It's the time to set ctrl now; - fill_mem_ctrl(nodes, ctrl, spd_addr); - - memreset_setup(); - sdram_initialize(nodes, ctrl); + enable_smbus();
- //dump_pci_devices(); +#define RC0 ((1<<1)<<8) +#define RC1 ((1<<2)<<8) +#if 0 + change_i2c_mux(RC0>>8); + dump_smbus_registers(); + change_i2c_mux(RC1>>8); + dump_smbus_registers(); +#endif + allow_all_aps_stop(bsp_apicid);
+ //It's the time to set ctrl now; + static const uint16_t spd_addr [] = { + //first node + RC0|DIMM0, RC0|DIMM2, 0, 0, + RC0|DIMM1, RC0|DIMM3, 0, 0, +#if CONFIG_MAX_PHYSICAL_CPUS > 1 + //second node + RC1|DIMM0, RC1|DIMM2, 0, 0, + RC1|DIMM1, RC1|DIMM3, 0, 0, +#endif + }; + fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); +#if 0 + change_i2c_mux(sysinfo->ctrl[0].channel0[0]>>8); + dump_spd_registers(&sysinfo->ctrl[0]); + change_i2c_mux(sysinfo->ctrl[1].channel0[0]>>8); + dump_spd_registers(&sysinfo->ctrl[1]); +#endif + memreset_setup(); + sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); +#if 0 + dump_pci_devices(); +#endif post_cache_as_ram(); }
-
Oskar Enoksson