EPIA-M10000 can't work properly with VGA from HD

Hi ,

Have any one can help me?

I used EPIA-M10000 + LinuxBIOS+ Filo 0.4.1 + mkelfImage 1.6 on Red Hat 8.0.
I needed VGABIOS to use.
But it can't work properly.
Serial port msgs show some unknow codes.

The POST number is 96.

epia config file:

#
# LinuxBIOS config file for: VIA epia-m mini-itx
#

target /epia-m

# via epia
mainboard via/epia-m

# Enable Serial Console for debugging
option SERIAL_CONSOLE=1
#option SERIAL_POST=1
#option TTYS0_BAUD=115200
option TTYS0_BAUD=57600
option DEFAULT_CONSOLE_LOGLEVEL=9
option DEBUG=1

# Use 256KB Standard Flash as Normal BIOS 
option RAMTEST=1
option USE_GENERIC_ROM=1
option STD_FLASH=1
option VGABIOS_START=0xfffc0000
option ZKERNEL_START=0xfffd0000
option ROM_SIZE=262144

# FrameBuffer
option HAVE_FRAMEBUFFER=1
option SMA_SIZE=16
option CONFIG_VGABIOS=1
option CONFIG_REALMODE_IDT=1
option CONFIG_PCIBIOS=1
option CONFIG_PCIPIOS_IRQ=1
dir src/bioscall

# payload size = 192KB
option PAYLOAD_SIZE=196608

# use ELF Loader to load Etherboot
option USE_ELF_BOOT=1

# Use Filo as our payload 
payload /vga+filo.bin

filo config:

# !!! NOTE !!!
# Do NOT add spaces or comments at the end of option lines.
# It confuses some versions of make.

# Image filename for automatic boot and optional command line parameter
AUTOBOOT_FILE = "hda2:/vmlinuz.epia root=/dev/hda2 console=tty0 console=ttyS0,57600"

# Time in second before booting AUTOBOOT_FILE
AUTOBOOT_DELAY = 2

# Driver for hard disk, CompactFlash, and CD-ROM on IDE bus
IDE_DISK = 1

# VGA text console
VGA_CONSOLE = 1
PC_KEYBOARD = 1

# Serial console
SERIAL_CONSOLE = 1
SERIAL_IOBASE = 0x3f8
SERIAL_SPEED = 57600

# Filesystems
FSYS_EXT2FS = 1
FSYS_FAT = 1
FSYS_JFS = 1
FSYS_MINIX = 1
FSYS_REISERFS = 1
FSYS_XFS = 1
FSYS_ISO9660 = 1

# Support for boot disk image in bootable CD-ROM (El Torito)
ELTORITO = 1

# PCI support
SUPPORT_PCI = 1

# Sound support (needs SUPPORT_PCI)
SUPPORT_SOUND = 1

# Sound drivers
VIA_SOUND = 1

# Debugging
DEBUG_ALL = 1
DEBUG_ELFBOOT = 1
DEBUG_ELFNOTE = 1
DEBUG_LINUXBIOS = 1
#DEBUG_MALLOC = 1
DEBUG_MULTIBOOT = 1
#DEBUG_SEGMENT = 1
#DEBUG_SYS_INFO = 1
#DEBUG_TIMER = 1
#DEBUG_BLOCKDEV = 1
DEBUG_PCI = 1
#DEBUG_VIA_SOUND = 1
DEBUG_LINUXLOAD = 1
DEBUG_IDE = 1
#DEBUG_ELTORITO = 1

# i386 options

# Loader for standard Linux kernel image, a.k.a. /vmlinuz
LINUX_LOADER = 1

# Boot FILO from Multiboot loader (eg. GRUB)
MULTIBOOT_IMAGE = 1

# Use PCI Configuration Mechanism #1 (most boards)
PCI_CONFIG_1 = 1

************************************************************

Any suggestion, please tell me.

Best regards,
Eddy
==========================================================
 沒錢換照相手機？快上 eBay 撿便宜
 http://edm-prg.epaper.com.tw/click.php?ad_code=31602
==========================================================
 PChome交友~~幸福天天有 *^o^*//
 http://love.pchome.com.tw/
==========================================================

EPIA-M10000 can't work properly with VGA from HD [PMX:##]

[ron minnich]

can you send serial port output?

ron