Will coreboot work on my Shuttle X27?

[Jørn Odberg]

1) This is a Shuttle X27 , dual Intel Atom CPU 330.
lshw reports:
- Motherboard SFM27
- BIOS Phoenix v6.00 PG
- Host bridge: Intel 82945G/GZ/P/PL Memory Controller Hub
- Display: Intel 82945G/GZ Integrated
- Audio: Intel N10/ICH 7 HD
- PCI Bridge: Intel N10/ICH 7 Family PCI Express Port 1
- Network: TRL8111/8168B Pci Express Gigabit
- USB: Intel N10/ICH7 Family USB UHCI / N10/ICH 7 Family USB2 EHCI
- PCI Bridge: Intel 82801 PCI bridge
 -ISA bridge: 82801GB/GR (ICH7 Family) LPC Interface Bridge
- SMBus N10/ICH 7 Family SMBus Controller
See attached lshw.txt

2) See attached lspci-tvnn.txt

3) See attached superiotool-dV.txt

4) See attached flashrom-V.txt

Please tell if I need to supply more info.

// jorn

[Stefan Reinauer]

* Jørn Odberg  [110217 15:49]:
> This is a Shuttle X27 , dual Intel Atom CPU 330.

This system is fairly similar to the Intel D945GCLF board that is
already supported by coreboot. You will have to adapt the SuperIO
settings in devicetree.cb and romstage.c to the ite/it8718f though.
> superiotool r3844
> Found ITE IT8718F (id=0x8718, rev=0x5) at 0x2e

Make sure you have a backup BIOS chip and a means of recovery as well as
a serial null modem cable for the debug messages.

Stefan