Re: [coreboot] Freescale i.MX6

On Fri, 20 Sep 2013 12:53:07 +0200
Christian Gmeiner  wrote:

Hi Guys.
> > thank you for your quick response.
> >
> > If there is actually no active effort to support i.MX6, I’m

interested in
> > leading that project.
> >
> > But I cannot start before the end of the year because I have to wait

for our
> > hardware and to bring-up the board first with u-boot.
>
> I think that I could spend 2-3 days to look into initial support for
> the I.MX6 during the
> next 2-3 weeks.

well I can give you a git-link for an U-Boot already running and
kicking on i.MX6 (D&Q), it's DT/FDT capable.
If you want to cut this short.
> > Another point is to think about hardware donation.
>
> I have access to some I.MX6D and one I.MX6Q boards.. also I own a ARM
> jtag. So I have
> all I need :)

I also have access to i.MX6D/Q boards, no JTAG/OLIMEX though.

Oliver Wendt

Freescale i.MX6

[Christian Gmeiner]

2013/9/20  :
> On Fri, 20 Sep 2013 12:53:07 +0200
> Christian Gmeiner  wrote:
>
> Hi Guys.
> > > thank you for your quick response.
> > >
> > > If there is actually no active effort to support i.MX6, I’m
>
> interested in
> > > leading that project.
> > >
> > > But I cannot start before the end of the year because I have to wait
>
> for our
> > > hardware and to bring-up the board first with u-boot.
> >
> > I think that I could spend 2-3 days to look into initial support for
> > the I.MX6 during the
> > next 2-3 weeks.
>
> well I can give you a git-link for an U-Boot already running and
> kicking on i.MX6 (D&Q), it's DT/FDT capable.
> If you want to cut this short.

u-boot... I am using mainline u-boot.git for a custom I.MX6D board..
but thanks.
> > > Another point is to think about hardware donation.
> >
> > I have access to some I.MX6D and one I.MX6Q boards.. also I own a ARM
> > jtag. So I have
> > all I need :)
>
> I also have access to i.MX6D/Q boards, no JTAG/OLIMEX though.