RE: Enable apic ext id to use 256 apic id for AMD64

[YhLu]

Yes.

#ifndef ENABLE_APIC_EXT_ID
#define ENABLE_APIC_EXT_ID 0 
#endif

static void enable_apic_ext_id(u8 node)
{
#if ENABLE_APIC_EXT_ID==1
#warning "FIXME Is the right place to enable apic ext id here?"

u32 val;

val = pci_read_config32(NODE_HT(node), 0x68);
        val |= (HTTC_APIC_EXT_SPUR | HTTC_APIC_EXT_ID |
HTTC_APIC_EXT_BRD_CST);
        pci_write_config32(NODE_HT(node), 0x68, val);
#endif
}

-----Original Message-----
From: Andi Kleen [mailto:[e-mail]] 
Sent: Friday, January 07, 2005 1:29 PM
To: YhLu
Cc: Stefan Reinauer; Ronald G. Minnich; [e-mail];
[e-mail]; [e-mail]; [e-mail]; Matt
Domsch
Subject: Re: Enable apic ext id to use 256 apic id for AMD64
>      nodeid = lapicid() & 0xf;
>     #if ENABLE_APIC_EXT_ID == 1
>             enable_apic_ext_id(nodeid);
>             lapic_write(LAPIC_ID, ( lapic_read(LAPIC_ID) |
>
> (APIC_ID_OFFSET<<24) ) ); // CPU apicid is from 0x10

Surely you should at least enable ApicExtBrd too. Otherwise
0xf will send to all CPUs.

-Andi