[commit] r5442 - in trunk/src: drivers/ati/ragexl include/boot mainboard/amd/dbm690t mainboard/amd/mahogany mainboard/amd/mahogany_fam10 mainboard/amd/pistachio mainboard/amd/serengeti_cheetah main...
Author: stepan Date: Thu Apr 15 14:39:29 2010 New Revision: 5442 URL: https://tracker.coreboot.org/trac/coreboot/changeset/5442
Log: zero warnings days...
Signed-off-by: Stefan Reinauer stepan@coresystems.de Acked-by: Stefan Reinauer stepan@coresystems.de
Modified: trunk/src/drivers/ati/ragexl/mach64_ct.c trunk/src/drivers/ati/ragexl/xlinit.c trunk/src/include/boot/tables.h trunk/src/mainboard/amd/dbm690t/mainboard.c trunk/src/mainboard/amd/mahogany/mainboard.c trunk/src/mainboard/amd/mahogany_fam10/mainboard.c trunk/src/mainboard/amd/pistachio/mainboard.c trunk/src/mainboard/amd/serengeti_cheetah/romstage.c trunk/src/mainboard/asrock/939a785gmh/get_bus_conf.c trunk/src/mainboard/asrock/939a785gmh/mainboard.c trunk/src/mainboard/asus/a8v-e_se/romstage.c trunk/src/mainboard/asus/m2v-mx_se/mainboard.c trunk/src/mainboard/asus/m2v-mx_se/romstage.c trunk/src/mainboard/gigabyte/ga_2761gxdk/romstage.c trunk/src/mainboard/gigabyte/m57sli/romstage.c trunk/src/mainboard/hp/dl145_g3/romstage.c trunk/src/mainboard/intel/eagleheights/debug.c trunk/src/mainboard/iwill/dk8_htx/romstage.c trunk/src/mainboard/iwill/dk8s2/romstage.c trunk/src/mainboard/iwill/dk8x/romstage.c trunk/src/mainboard/kontron/kt690/mainboard.c trunk/src/mainboard/msi/ms7260/romstage.c trunk/src/mainboard/msi/ms9185/romstage.c trunk/src/mainboard/msi/ms9282/romstage.c trunk/src/mainboard/nvidia/l1_2pvv/get_bus_conf.c trunk/src/mainboard/nvidia/l1_2pvv/romstage.c trunk/src/mainboard/olpc/btest/mainboard.c trunk/src/mainboard/sunw/ultra40/get_bus_conf.c trunk/src/mainboard/sunw/ultra40/irq_tables.c trunk/src/mainboard/sunw/ultra40/mptable.c trunk/src/mainboard/supermicro/h8dme/romstage.c trunk/src/mainboard/supermicro/h8dmr/romstage.c trunk/src/mainboard/technexion/tim5690/mainboard.c trunk/src/mainboard/technexion/tim5690/vgabios.c trunk/src/mainboard/technexion/tim8690/mainboard.c trunk/src/mainboard/tyan/s2735/romstage.c trunk/src/mainboard/tyan/s2912/romstage.c trunk/src/mainboard/via/epia-m700/Makefile.inc trunk/src/mainboard/via/epia-m700/wakeup.c trunk/src/mainboard/via/epia-n/mainboard.c trunk/src/northbridge/amd/amdk8/raminit_f.c trunk/src/northbridge/intel/e7501/debug.c trunk/src/northbridge/intel/e7501/raminit.c trunk/src/northbridge/intel/e7501/raminit.h trunk/src/northbridge/intel/i82830/northbridge.c trunk/src/northbridge/intel/i945/northbridge.c trunk/src/southbridge/intel/i82801ex/i82801ex_early_smbus.c trunk/src/southbridge/via/vt8235/vt8235.c
Modified: trunk/src/drivers/ati/ragexl/mach64_ct.c ============================================================================== --- trunk/src/drivers/ati/ragexl/mach64_ct.c Thu Apr 15 10:26:30 2010 (r5441) +++ trunk/src/drivers/ati/ragexl/mach64_ct.c Thu Apr 15 14:39:29 2010 (r5442) @@ -1,4 +1,5 @@ #define DEBUG_PLL 0 +#define PLL_CRTC_DECODE 0
/* FIXME: remove the FAIL definition */ #if 0 @@ -123,9 +124,7 @@ #if DEBUG_PLL==1 int pllmclk, pllsclk; #endif - - u32 q, x; /* x is a workaround for sparc64-linux-gcc */ - x = x; /* x is a workaround for sparc64-linux-gcc */ + u32 q;
pll->pll_ref_div = info->pll_per*2*255/info->ref_clk_per;
Modified: trunk/src/drivers/ati/ragexl/xlinit.c ============================================================================== --- trunk/src/drivers/ati/ragexl/xlinit.c Thu Apr 15 10:26:30 2010 (r5441) +++ trunk/src/drivers/ati/ragexl/xlinit.c Thu Apr 15 14:39:29 2010 (r5442) @@ -485,12 +485,12 @@ static void ati_ragexl_init(device_t dev) { u32 chip_id; - u32 i; int j; u16 type; u8 rev; const char *chipname = NULL; #if CONFIG_CONSOLE_BTEXT + u32 i; const char *xtal; #endif int pll, mclk, xclk;
Modified: trunk/src/include/boot/tables.h ============================================================================== --- trunk/src/include/boot/tables.h Thu Apr 15 10:26:30 2010 (r5441) +++ trunk/src/include/boot/tables.h Thu Apr 15 14:39:29 2010 (r5442) @@ -2,6 +2,7 @@ #define BOOT_TABLES_H
#include <boot/coreboot_tables.h> +#include <arch/coreboot_tables.h>
void lb_add_memory_range(struct lb_memory *mem, uint32_t type, uint64_t start, uint64_t size);
Modified: trunk/src/mainboard/amd/dbm690t/mainboard.c ============================================================================== --- trunk/src/mainboard/amd/dbm690t/mainboard.c Thu Apr 15 10:26:30 2010 (r5441) +++ trunk/src/mainboard/amd/dbm690t/mainboard.c Thu Apr 15 14:39:29 2010 (r5442) @@ -21,12 +21,11 @@ #include <device/device.h> #include <device/pci.h> #include <arch/io.h> -#include <boot/coreboot_tables.h> -#include <arch/coreboot_tables.h> +#include <boot/tables.h> #include <cpu/x86/msr.h> #include <cpu/amd/mtrr.h> #include <device/pci_def.h> -#include <../southbridge/amd/sb600/sb600.h> +#include <southbridge/amd/sb600/sb600.h> #include "chip.h"
#define ADT7461_ADDRESS 0x4C @@ -36,8 +35,6 @@ extern int do_smbus_read_byte(u32 smbus_io_base, u32 device, u32 address); extern int do_smbus_write_byte(u32 smbus_io_base, u32 device, u32 address, u8 val); -extern void lb_add_memory_range(struct lb_memory *mem, uint32_t type, - uint64_t start, uint64_t size); #define ADT7461_read_byte(address) \ do_smbus_read_byte(SMBUS_IO_BASE, ADT7461_ADDRESS, address) #define ARA_read_byte(address) \
Modified: trunk/src/mainboard/amd/mahogany/mainboard.c ============================================================================== --- trunk/src/mainboard/amd/mahogany/mainboard.c Thu Apr 15 10:26:30 2010 (r5441) +++ trunk/src/mainboard/amd/mahogany/mainboard.c Thu Apr 15 14:39:29 2010 (r5442) @@ -21,19 +21,15 @@ #include <device/device.h> #include <device/pci.h> #include <arch/io.h> -#include <boot/coreboot_tables.h> +#include <boot/tables.h> #include <cpu/x86/msr.h> #include <cpu/amd/mtrr.h> #include <device/pci_def.h> -#include <arch/coreboot_tables.h> -#include <../southbridge/amd/sb700/sb700.h> +#include <southbridge/amd/sb700/sb700.h> #include "chip.h"
#define SMBUS_IO_BASE 0x6000
-extern void lb_add_memory_range(struct lb_memory *mem, uint32_t type, - uint64_t start, uint64_t size); - uint64_t uma_memory_base, uma_memory_size;
void set_pcie_dereset(void);
Modified: trunk/src/mainboard/amd/mahogany_fam10/mainboard.c ============================================================================== --- trunk/src/mainboard/amd/mahogany_fam10/mainboard.c Thu Apr 15 10:26:30 2010 (r5441) +++ trunk/src/mainboard/amd/mahogany_fam10/mainboard.c Thu Apr 15 14:39:29 2010 (r5442) @@ -21,19 +21,15 @@ #include <device/device.h> #include <device/pci.h> #include <arch/io.h> -#include <boot/coreboot_tables.h> +#include <boot/tables.h> #include <cpu/x86/msr.h> #include <cpu/amd/mtrr.h> #include <device/pci_def.h> -#include <arch/coreboot_tables.h> -#include <../southbridge/amd/sb700/sb700.h> +#include <southbridge/amd/sb700/sb700.h> #include "chip.h"
#define SMBUS_IO_BASE 0x6000
-extern void lb_add_memory_range(struct lb_memory *mem, uint32_t type, - uint64_t start, uint64_t size); - uint64_t uma_memory_base, uma_memory_size;
void set_pcie_dereset(void);
Modified: trunk/src/mainboard/amd/pistachio/mainboard.c ============================================================================== --- trunk/src/mainboard/amd/pistachio/mainboard.c Thu Apr 15 10:26:30 2010 (r5441) +++ trunk/src/mainboard/amd/pistachio/mainboard.c Thu Apr 15 14:39:29 2010 (r5442) @@ -21,12 +21,11 @@ #include <device/device.h> #include <device/pci.h> #include <arch/io.h> -#include <boot/coreboot_tables.h> -#include <arch/coreboot_tables.h> +#include <boot/tables.h> #include <cpu/x86/msr.h> #include <cpu/amd/mtrr.h> #include <device/pci_def.h> -#include <../southbridge/amd/sb600/sb600.h> +#include <southbridge/amd/sb600/sb600.h> #include "chip.h"
#define ADT7475_ADDRESS 0x2E @@ -35,9 +34,6 @@ extern int do_smbus_read_byte(u32 smbus_io_base, u32 device, u32 address); extern int do_smbus_write_byte(u32 smbus_io_base, u32 device, u32 address, u8 val); -extern void lb_add_memory_range(struct lb_memory *mem, uint32_t type, - uint64_t start, uint64_t size); - #define ADT7475_read_byte(address) \ do_smbus_read_byte(SMBUS_IO_BASE, ADT7475_ADDRESS, address) #define ADT7475_write_byte(address, val) \
Modified: trunk/src/mainboard/amd/serengeti_cheetah/romstage.c ============================================================================== --- trunk/src/mainboard/amd/serengeti_cheetah/romstage.c Thu Apr 15 10:26:30 2010 (r5441) +++ trunk/src/mainboard/amd/serengeti_cheetah/romstage.c Thu Apr 15 14:39:29 2010 (r5442) @@ -101,12 +101,9 @@ }
#include "northbridge/amd/amdk8/amdk8.h" -#include "northbridge/amd/amdk8/coherent_ht.c" - #include "northbridge/amd/amdk8/incoherent_ht.c" - +#include "northbridge/amd/amdk8/coherent_ht.c" #include "northbridge/amd/amdk8/raminit_f.c" - #include "lib/generic_sdram.c"
/* tyan does not want the default */
Modified: trunk/src/mainboard/asrock/939a785gmh/get_bus_conf.c ============================================================================== --- trunk/src/mainboard/asrock/939a785gmh/get_bus_conf.c Thu Apr 15 10:26:30 2010 (r5441) +++ trunk/src/mainboard/asrock/939a785gmh/get_bus_conf.c Thu Apr 15 14:39:29 2010 (r5442) @@ -63,8 +63,6 @@
static u32 get_bus_conf_done = 0;
-void get_bus_conf(void); - void get_bus_conf(void) { u32 apicid_base;
Modified: trunk/src/mainboard/asrock/939a785gmh/mainboard.c ============================================================================== --- trunk/src/mainboard/asrock/939a785gmh/mainboard.c Thu Apr 15 10:26:30 2010 (r5441) +++ trunk/src/mainboard/asrock/939a785gmh/mainboard.c Thu Apr 15 14:39:29 2010 (r5442) @@ -21,19 +21,15 @@ #include <device/device.h> #include <device/pci.h> #include <arch/io.h> -#include <boot/coreboot_tables.h> +#include <boot/tables.h> #include <cpu/x86/msr.h> #include <cpu/amd/mtrr.h> #include <device/pci_def.h> -#include <arch/coreboot_tables.h> -#include <../southbridge/amd/sb700/sb700.h> +#include <southbridge/amd/sb700/sb700.h> #include "chip.h"
#define SMBUS_IO_BASE 0x6000
-extern void lb_add_memory_range(struct lb_memory *mem, uint32_t type, - uint64_t start, uint64_t size); - uint64_t uma_memory_base, uma_memory_size;
void set_pcie_dereset(void);
Modified: trunk/src/mainboard/asus/a8v-e_se/romstage.c ============================================================================== --- trunk/src/mainboard/asus/a8v-e_se/romstage.c Thu Apr 15 10:26:30 2010 (r5441) +++ trunk/src/mainboard/asus/a8v-e_se/romstage.c Thu Apr 15 14:39:29 2010 (r5442) @@ -105,10 +105,11 @@ #define K8_4RANK_DIMM_SUPPORT 1
#include "northbridge/amd/amdk8/amdk8.h" -#include "northbridge/amd/amdk8/raminit.c" -#include "northbridge/amd/amdk8/coherent_ht.c" #include "northbridge/amd/amdk8/incoherent_ht.c" +#include "northbridge/amd/amdk8/coherent_ht.c" +#include "northbridge/amd/amdk8/raminit.c" #include "lib/generic_sdram.c" + #include "cpu/amd/dualcore/dualcore.c" #include "southbridge/via/k8t890/k8t890_early_car.c"
@@ -126,7 +127,7 @@ return (dev >> 15) & 0x1f; }
-void sio_init(void) +static void sio_init(void) { u8 reg;
@@ -171,17 +172,17 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { static const uint16_t spd_addr[] = { + // Node 0 (0xa << 3) | 0, (0xa << 3) | 2, 0, 0, (0xa << 3) | 1, (0xa << 3) | 3, 0, 0, -#if CONFIG_MAX_PHYSICAL_CPUS > 1 + // Node 1 (0xa << 3) | 4, (0xa << 3) | 6, 0, 0, (0xa << 3) | 5, (0xa << 3) | 7, 0, 0, -#endif }; unsigned bsp_apicid = 0; int needs_reset = 0; - struct sys_info *sysinfo = - (CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE); + struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
sio_init(); w83627ehg_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
Modified: trunk/src/mainboard/asus/m2v-mx_se/mainboard.c ============================================================================== --- trunk/src/mainboard/asus/m2v-mx_se/mainboard.c Thu Apr 15 10:26:30 2010 (r5441) +++ trunk/src/mainboard/asus/m2v-mx_se/mainboard.c Thu Apr 15 14:39:29 2010 (r5442) @@ -21,9 +21,8 @@ #include <device/pci.h> #include <device/pci_ids.h> #include <boot/tables.h> -#include <arch/coreboot_tables.h> -#include "chip.h" #include <southbridge/via/k8t890/k8t890.h> +#include "chip.h"
int add_mainboard_resources(struct lb_memory *mem) {
Modified: trunk/src/mainboard/asus/m2v-mx_se/romstage.c ============================================================================== --- trunk/src/mainboard/asus/m2v-mx_se/romstage.c Thu Apr 15 10:26:30 2010 (r5441) +++ trunk/src/mainboard/asus/m2v-mx_se/romstage.c Thu Apr 15 14:39:29 2010 (r5442) @@ -70,10 +70,6 @@ #define SERIAL_DEV PNP_DEV(0x2e, IT8712F_SP1) #define WATCHDOG_DEV PNP_DEV(0x2e, IT8712F_GPIO)
-static void memreset_setup(void) -{ -} - static void memreset(int controllers, const struct mem_controller *ctrl) { } @@ -83,18 +79,20 @@ return smbus_read_byte(device, address); }
-void activate_spd_rom(const struct mem_controller *ctrl) +static void activate_spd_rom(const struct mem_controller *ctrl) { }
#define K8_4RANK_DIMM_SUPPORT 1
#include "southbridge/via/k8t890/k8t890_early_car.c" + #include "northbridge/amd/amdk8/amdk8.h" -#include "northbridge/amd/amdk8/raminit_f.c" -#include "northbridge/amd/amdk8/coherent_ht.c" #include "northbridge/amd/amdk8/incoherent_ht.c" +#include "northbridge/amd/amdk8/coherent_ht.c" +#include "northbridge/amd/amdk8/raminit_f.c" #include "lib/generic_sdram.c" + #include "cpu/amd/dualcore/dualcore.c"
#include "cpu/amd/car/post_cache_as_ram.c" @@ -144,34 +142,21 @@ return (dev >> 15) & 0x1f; }
-void sio_init(void) -{ - -} - -void real_main(unsigned long bist, unsigned long cpu_init_detectedx); - void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { - real_main(bist, cpu_init_detectedx); -} - -void real_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ static const uint16_t spd_addr[] = { + // Node 0 (0xa << 3) | 0, (0xa << 3) | 2, 0, 0, (0xa << 3) | 1, (0xa << 3) | 3, 0, 0, -#if CONFIG_MAX_PHYSICAL_CPUS > 1 + // Node 1 (0xa << 3) | 4, (0xa << 3) | 6, 0, 0, (0xa << 3) | 5, (0xa << 3) | 7, 0, 0, -#endif }; unsigned bsp_apicid = 0; int needs_reset = 0; struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
- sio_init(); it8712f_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); it8712f_kill_watchdog(); it8712f_enable_3vsbsw(); @@ -234,7 +219,6 @@ /* It's the time to set ctrl now. */ fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); enable_smbus(); - memreset_setup(); sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); post_cache_as_ram(); }
Modified: trunk/src/mainboard/gigabyte/ga_2761gxdk/romstage.c ============================================================================== --- trunk/src/mainboard/gigabyte/ga_2761gxdk/romstage.c Thu Apr 15 10:26:30 2010 (r5441) +++ trunk/src/mainboard/gigabyte/ga_2761gxdk/romstage.c Thu Apr 15 14:39:29 2010 (r5442) @@ -86,10 +86,6 @@
#include "southbridge/sis/sis966/sis966_early_ctrl.c"
-static void memreset_setup(void) -{ -} - static void memreset(int controllers, const struct mem_controller *ctrl) { } @@ -105,12 +101,9 @@ }
#include "northbridge/amd/amdk8/amdk8_f.h" -#include "northbridge/amd/amdk8/coherent_ht.c" - #include "northbridge/amd/amdk8/incoherent_ht.c" - +#include "northbridge/amd/amdk8/coherent_ht.c" #include "northbridge/amd/amdk8/raminit_f.c" - #include "lib/generic_sdram.c"
#include "resourcemap.c" @@ -165,12 +158,12 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { static const uint16_t spd_addr [] = { + // Node 0 (0xa<<3)|0, (0xa<<3)|2, 0, 0, (0xa<<3)|1, (0xa<<3)|3, 0, 0, -#if CONFIG_MAX_PHYSICAL_CPUS > 1 + // Node 1 (0xa<<3)|4, (0xa<<3)|6, 0, 0, (0xa<<3)|5, (0xa<<3)|7, 0, 0, -#endif };
struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + @@ -275,8 +268,6 @@ sis_init_stage1(); enable_smbus();
- memreset_setup(); - //do we need apci timer, tsc...., only debug need it for better output /* all ap stopped? */ // init_timer(); // Need to use TMICT to synconize FID/VID
Modified: trunk/src/mainboard/gigabyte/m57sli/romstage.c ============================================================================== --- trunk/src/mainboard/gigabyte/m57sli/romstage.c Thu Apr 15 10:26:30 2010 (r5441) +++ trunk/src/mainboard/gigabyte/m57sli/romstage.c Thu Apr 15 14:39:29 2010 (r5442) @@ -84,10 +84,6 @@
#include "southbridge/nvidia/mcp55/mcp55_early_ctrl.c"
-static void memreset_setup(void) -{ -} - static void memreset(int controllers, const struct mem_controller *ctrl) { } @@ -103,12 +99,9 @@ }
#include "northbridge/amd/amdk8/amdk8_f.h" -#include "northbridge/amd/amdk8/coherent_ht.c" - #include "northbridge/amd/amdk8/incoherent_ht.c" - +#include "northbridge/amd/amdk8/coherent_ht.c" #include "northbridge/amd/amdk8/raminit_f.c" - #include "lib/generic_sdram.c"
#include "resourcemap.c" @@ -132,8 +125,6 @@ #include "southbridge/nvidia/mcp55/mcp55_early_setup_ss.h" #include "southbridge/nvidia/mcp55/mcp55_early_setup_car.c"
- - #include "cpu/amd/car/post_cache_as_ram.c"
#include "cpu/amd/model_fxx/init_cpus.c" @@ -145,8 +136,6 @@
static void sio_setup(void) { - - unsigned value; uint32_t dword; uint8_t byte;
@@ -166,15 +155,16 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { static const uint16_t spd_addr [] = { + // Node 0 (0xa<<3)|0, (0xa<<3)|2, 0, 0, (0xa<<3)|1, (0xa<<3)|3, 0, 0, -#if CONFIG_MAX_PHYSICAL_CPUS > 1 + // Node 1 (0xa<<3)|4, (0xa<<3)|6, 0, 0, (0xa<<3)|5, (0xa<<3)|7, 0, 0, -#endif };
- struct sys_info *sysinfo = (CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE); + struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
int needs_reset = 0; unsigned bsp_apicid = 0; @@ -289,8 +279,6 @@
enable_smbus();
- memreset_setup(); - //do we need apci timer, tsc...., only debug need it for better output /* all ap stopped? */ // init_timer(); // Need to use TMICT to synconize FID/VID
Modified: trunk/src/mainboard/hp/dl145_g3/romstage.c ============================================================================== --- trunk/src/mainboard/hp/dl145_g3/romstage.c Thu Apr 15 10:26:30 2010 (r5441) +++ trunk/src/mainboard/hp/dl145_g3/romstage.c Thu Apr 15 14:39:29 2010 (r5442) @@ -107,16 +107,11 @@ }
#include "northbridge/amd/amdk8/amdk8_f.h" -#include "northbridge/amd/amdk8/coherent_ht.c" - #include "northbridge/amd/amdk8/incoherent_ht.c" - +#include "northbridge/amd/amdk8/coherent_ht.c" #include "northbridge/amd/amdk8/raminit_f.c" - #include "lib/generic_sdram.c"
-//#include "resourcemap.c" - #include "cpu/amd/dualcore/dualcore.c"
//first node @@ -212,8 +207,6 @@
pilot_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
- //setup_mp_resource_map(); - uart_init();
/* Halt if there was a built in self test failure */
Modified: trunk/src/mainboard/intel/eagleheights/debug.c ============================================================================== --- trunk/src/mainboard/intel/eagleheights/debug.c Thu Apr 15 10:26:30 2010 (r5441) +++ trunk/src/mainboard/intel/eagleheights/debug.c Thu Apr 15 14:39:29 2010 (r5442) @@ -38,7 +38,7 @@ return; }
-static void xbus_en(void) +static inline void xbus_en(void) { /* select the XBUS function in the SIO */ outb(0x07, 0x2e); @@ -66,7 +66,7 @@ return; }
-static void siodump(void) +static inline void siodump(void) { int i; unsigned char data; @@ -143,7 +143,7 @@ print_debug_hex8((dev >> 8) & 7); }
-static void print_pci_devices(void) +static inline void print_pci_devices(void) { device_t dev; for(dev = PCI_DEV(0, 0, 0); @@ -161,7 +161,7 @@ } }
-static void dump_pci_device(unsigned dev) +static inline void dump_pci_device(unsigned dev) { int i; print_debug_pci_dev(dev); @@ -182,7 +182,7 @@ } }
-static void dump_bar14(unsigned dev) +static inline void dump_bar14(unsigned dev) { int i; unsigned long bar; @@ -227,70 +227,7 @@ } }
-#if 0 -static void dump_spd_registers(const struct mem_controller *ctrl) -{ - int i; - print_debug("\n"); - for(i = 0; i < 4; i++) { - unsigned device; - device = ctrl->channel0[i]; - if (device) { - int j; - print_debug("dimm: "); - print_debug_hex8(i); - print_debug(".0: "); - print_debug_hex8(device); - for(j = 0; j < 256; j++) { - int status; - unsigned char byte; - if ((j & 0xf) == 0) { - print_debug("\n"); - print_debug_hex8(j); - print_debug(": "); - } - status = smbus_read_byte(device, j); - if (status < 0) { - print_debug("bad device\n"); - break; - } - byte = status & 0xff; - print_debug_hex8(byte); - print_debug_char(' '); - } - print_debug("\n"); - } - device = ctrl->channel1[i]; - if (device) { - int j; - print_debug("dimm: "); - print_debug_hex8(i); - print_debug(".1: "); - print_debug_hex8(device); - for(j = 0; j < 256; j++) { - int status; - unsigned char byte; - if ((j & 0xf) == 0) { - print_debug("\n"); - print_debug_hex8(j); - print_debug(": "); - } - status = smbus_read_byte(device, j); - if (status < 0) { - print_debug("bad device\n"); - break; - } - byte = status & 0xff; - print_debug_hex8(byte); - print_debug_char(' '); - } - print_debug("\n"); - } - } -} -#endif - -void dump_spd_registers(void) +static inline void dump_spd_registers(void) { unsigned device; device = SMBUS_MEM_DEVICE_START; @@ -322,7 +259,7 @@ } }
-void dump_ipmi_registers(void) +static inline void dump_ipmi_registers(void) { unsigned device; device = 0x42;
Modified: trunk/src/mainboard/iwill/dk8_htx/romstage.c ============================================================================== --- trunk/src/mainboard/iwill/dk8_htx/romstage.c Thu Apr 15 10:26:30 2010 (r5441) +++ trunk/src/mainboard/iwill/dk8_htx/romstage.c Thu Apr 15 14:39:29 2010 (r5442) @@ -90,12 +90,9 @@ }
#include "northbridge/amd/amdk8/amdk8.h" -#include "northbridge/amd/amdk8/coherent_ht.c" - #include "northbridge/amd/amdk8/incoherent_ht.c" - +#include "northbridge/amd/amdk8/coherent_ht.c" #include "northbridge/amd/amdk8/raminit.c" - #include "lib/generic_sdram.c" #include "lib/ramtest.c"
@@ -113,7 +110,6 @@ #define DIMM6 0x56 #define DIMM7 0x57
- #include "cpu/amd/car/post_cache_as_ram.c"
#include "cpu/amd/model_fxx/init_cpus.c"
Modified: trunk/src/mainboard/iwill/dk8s2/romstage.c ============================================================================== --- trunk/src/mainboard/iwill/dk8s2/romstage.c Thu Apr 15 10:26:30 2010 (r5441) +++ trunk/src/mainboard/iwill/dk8s2/romstage.c Thu Apr 15 14:39:29 2010 (r5442) @@ -90,12 +90,9 @@ }
#include "northbridge/amd/amdk8/amdk8.h" -#include "northbridge/amd/amdk8/coherent_ht.c" - #include "northbridge/amd/amdk8/incoherent_ht.c" - +#include "northbridge/amd/amdk8/coherent_ht.c" #include "northbridge/amd/amdk8/raminit.c" - #include "lib/generic_sdram.c" #include "lib/ramtest.c"
@@ -113,7 +110,6 @@ #define DIMM6 0x56 #define DIMM7 0x57
- #include "cpu/amd/car/post_cache_as_ram.c"
#include "cpu/amd/model_fxx/init_cpus.c"
Modified: trunk/src/mainboard/iwill/dk8x/romstage.c ============================================================================== --- trunk/src/mainboard/iwill/dk8x/romstage.c Thu Apr 15 10:26:30 2010 (r5441) +++ trunk/src/mainboard/iwill/dk8x/romstage.c Thu Apr 15 14:39:29 2010 (r5442) @@ -90,12 +90,9 @@ }
#include "northbridge/amd/amdk8/amdk8.h" -#include "northbridge/amd/amdk8/coherent_ht.c" - #include "northbridge/amd/amdk8/incoherent_ht.c" - +#include "northbridge/amd/amdk8/coherent_ht.c" #include "northbridge/amd/amdk8/raminit.c" - #include "lib/generic_sdram.c" #include "lib/ramtest.c"
@@ -113,7 +110,6 @@ #define DIMM6 0x56 #define DIMM7 0x57
- #include "cpu/amd/car/post_cache_as_ram.c"
#include "cpu/amd/model_fxx/init_cpus.c"
Modified: trunk/src/mainboard/kontron/kt690/mainboard.c ============================================================================== --- trunk/src/mainboard/kontron/kt690/mainboard.c Thu Apr 15 10:26:30 2010 (r5441) +++ trunk/src/mainboard/kontron/kt690/mainboard.c Thu Apr 15 14:39:29 2010 (r5442) @@ -21,8 +21,7 @@ #include <device/device.h> #include <device/pci.h> #include <arch/io.h> -#include <boot/coreboot_tables.h> -#include <arch/coreboot_tables.h> +#include <boot/tables.h> #include <cpu/x86/msr.h> #include <cpu/amd/mtrr.h> #include <device/pci_def.h> @@ -36,8 +35,6 @@ extern int do_smbus_read_byte(u32 smbus_io_base, u32 device, u32 address); extern int do_smbus_write_byte(u32 smbus_io_base, u32 device, u32 address, u8 val); -extern void lb_add_memory_range(struct lb_memory *mem, uint32_t type, - uint64_t start, uint64_t size); #define ADT7461_read_byte(address) \ do_smbus_read_byte(SMBUS_IO_BASE, ADT7461_ADDRESS, address) #define ARA_read_byte(address) \
Modified: trunk/src/mainboard/msi/ms7260/romstage.c ============================================================================== --- trunk/src/mainboard/msi/ms7260/romstage.c Thu Apr 15 10:26:30 2010 (r5441) +++ trunk/src/mainboard/msi/ms7260/romstage.c Thu Apr 15 14:39:29 2010 (r5442) @@ -83,7 +83,6 @@
#include "southbridge/nvidia/mcp55/mcp55_early_ctrl.c"
-static void memreset_setup(void) {} static void memreset(int controllers, const struct mem_controller *ctrl) {} static inline void activate_spd_rom(const struct mem_controller *ctrl) {}
@@ -93,10 +92,11 @@ }
#include "northbridge/amd/amdk8/amdk8_f.h" -#include "northbridge/amd/amdk8/coherent_ht.c" #include "northbridge/amd/amdk8/incoherent_ht.c" +#include "northbridge/amd/amdk8/coherent_ht.c" #include "northbridge/amd/amdk8/raminit_f.c" #include "lib/generic_sdram.c" + #include "resourcemap.c" #include "cpu/amd/dualcore/dualcore.c"
@@ -144,16 +144,17 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { static const uint16_t spd_addr[] = { + // Node 0 (0xa << 3) | 0, (0xa << 3) | 2, 0, 0, (0xa << 3) | 1, (0xa << 3) | 3, 0, 0, -#if CONFIG_MAX_PHYSICAL_CPUS > 1 + // Node 1 (0xa << 3) | 4, (0xa << 3) | 6, 0, 0, (0xa << 3) | 5, (0xa << 3) | 7, 0, 0, -#endif };
- struct sys_info *sysinfo = - (CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE); + struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE); + int needs_reset = 0; unsigned bsp_apicid = 0;
@@ -252,8 +253,6 @@
enable_smbus();
- memreset_setup(); - /* Do we need apci timer, tsc...., only debug need it for better output */ /* All AP stopped? */ // init_timer(); /* Need to use TMICT to synconize FID/VID. */
Modified: trunk/src/mainboard/msi/ms9185/romstage.c ============================================================================== --- trunk/src/mainboard/msi/ms9185/romstage.c Thu Apr 15 10:26:30 2010 (r5441) +++ trunk/src/mainboard/msi/ms9185/romstage.c Thu Apr 15 14:39:29 2010 (r5442) @@ -71,9 +71,6 @@ #define SERIAL_DEV PNP_DEV(0x2e, PC87417_SP1) #define RTC_DEV PNP_DEV(0x2e, PC87417_RTC) #include "southbridge/broadcom/bcm5785/bcm5785_early_setup.c" -static void memreset_setup(void) -{ -}
static void memreset(int controllers, const struct mem_controller *ctrl) { @@ -104,12 +101,9 @@ }
#include "northbridge/amd/amdk8/amdk8_f.h" -#include "northbridge/amd/amdk8/coherent_ht.c" - #include "northbridge/amd/amdk8/incoherent_ht.c" - +#include "northbridge/amd/amdk8/coherent_ht.c" #include "northbridge/amd/amdk8/raminit_f.c" - #include "lib/generic_sdram.c"
/* msi does not want the default */ @@ -129,7 +123,6 @@ #define DIMM6 0x56 #define DIMM7 0x57
- #include "cpu/amd/car/post_cache_as_ram.c"
#include "cpu/amd/model_fxx/init_cpus.c" @@ -144,12 +137,9 @@ //first node RC0|DIMM0, RC0|DIMM2, RC0|DIMM4, RC0|DIMM6, RC0|DIMM1, RC0|DIMM3, RC0|DIMM5, RC0|DIMM7, -#if CONFIG_MAX_PHYSICAL_CPUS > 1 //second node RC1|DIMM0, RC1|DIMM2, RC1|DIMM4, RC1|DIMM6, RC1|DIMM1, RC1|DIMM3, RC1|DIMM5, RC1|DIMM7, -#endif - };
struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + @@ -278,8 +268,6 @@ } #endif
- memreset_setup(); - //do we need apci timer, tsc...., only debug need it for better output /* all ap stopped? */ // init_timer(); // Need to use TMICT to synconize FID/VID
Modified: trunk/src/mainboard/msi/ms9282/romstage.c ============================================================================== --- trunk/src/mainboard/msi/ms9282/romstage.c Thu Apr 15 10:26:30 2010 (r5441) +++ trunk/src/mainboard/msi/ms9282/romstage.c Thu Apr 15 14:39:29 2010 (r5442) @@ -68,9 +68,6 @@
#include <device/pci_ids.h> #include "southbridge/nvidia/mcp55/mcp55_early_ctrl.c" -static void memreset_setup(void) -{ -}
static void memreset(int controllers, const struct mem_controller *ctrl) { @@ -103,9 +100,9 @@ //#define K8_4RANK_DIMM_SUPPORT 1
#include "northbridge/amd/amdk8/amdk8_f.h" -#include "northbridge/amd/amdk8/raminit_f.c" -#include "northbridge/amd/amdk8/coherent_ht.c" #include "northbridge/amd/amdk8/incoherent_ht.c" +#include "northbridge/amd/amdk8/coherent_ht.c" +#include "northbridge/amd/amdk8/raminit_f.c" #include "lib/generic_sdram.c"
/* msi does not want the default */ @@ -228,8 +225,6 @@ } #endif
- memreset_setup(); - sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo);
post_cache_as_ram();
Modified: trunk/src/mainboard/nvidia/l1_2pvv/get_bus_conf.c ============================================================================== --- trunk/src/mainboard/nvidia/l1_2pvv/get_bus_conf.c Thu Apr 15 10:26:30 2010 (r5441) +++ trunk/src/mainboard/nvidia/l1_2pvv/get_bus_conf.c Thu Apr 15 14:39:29 2010 (r5442) @@ -92,11 +92,9 @@
void get_bus_conf(void) { - unsigned apicid_base; struct mb_sysconf_t *m;
- device_t dev; int i, j;
if (get_bus_conf_done) @@ -160,5 +158,4 @@ #endif m->apicid_mcp55 = apicid_base+0; m->apicid_mcp55b = apicid_base+1; - }
Modified: trunk/src/mainboard/nvidia/l1_2pvv/romstage.c ============================================================================== --- trunk/src/mainboard/nvidia/l1_2pvv/romstage.c Thu Apr 15 10:26:30 2010 (r5441) +++ trunk/src/mainboard/nvidia/l1_2pvv/romstage.c Thu Apr 15 14:39:29 2010 (r5442) @@ -83,10 +83,6 @@
#include "southbridge/nvidia/mcp55/mcp55_early_ctrl.c"
-static void memreset_setup(void) -{ -} - static void memreset(int controllers, const struct mem_controller *ctrl) { } @@ -102,12 +98,9 @@ }
#include "northbridge/amd/amdk8/amdk8_f.h" -#include "northbridge/amd/amdk8/coherent_ht.c" - #include "northbridge/amd/amdk8/incoherent_ht.c" - +#include "northbridge/amd/amdk8/coherent_ht.c" #include "northbridge/amd/amdk8/raminit_f.c" - #include "lib/generic_sdram.c"
#include "resourcemap.c" @@ -274,8 +267,6 @@
enable_smbus();
- memreset_setup(); - //do we need apci timer, tsc...., only debug need it for better output /* all ap stopped? */ // init_timer(); // Need to use TMICT to synconize FID/VID
Modified: trunk/src/mainboard/olpc/btest/mainboard.c ============================================================================== --- trunk/src/mainboard/olpc/btest/mainboard.c Thu Apr 15 10:26:30 2010 (r5441) +++ trunk/src/mainboard/olpc/btest/mainboard.c Thu Apr 15 14:39:29 2010 (r5442) @@ -69,7 +69,7 @@ write_bit(rev > 0 ? 1 : 0); }
-void +static void init_cafe_irq(void){ const unsigned char slots_cafe[4] = {11, 0, 0, 0};
Modified: trunk/src/mainboard/sunw/ultra40/get_bus_conf.c ============================================================================== --- trunk/src/mainboard/sunw/ultra40/get_bus_conf.c Thu Apr 15 10:26:30 2010 (r5441) +++ trunk/src/mainboard/sunw/ultra40/get_bus_conf.c Thu Apr 15 14:39:29 2010 (r5442) @@ -7,6 +7,7 @@ #include <cpu/amd/multicore.h> #endif #include <stdlib.h> +#include <cpu/amd/amdk8_sysconf.h>
// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables
Modified: trunk/src/mainboard/sunw/ultra40/irq_tables.c ============================================================================== --- trunk/src/mainboard/sunw/ultra40/irq_tables.c Thu Apr 15 10:26:30 2010 (r5441) +++ trunk/src/mainboard/sunw/ultra40/irq_tables.c Thu Apr 15 14:39:29 2010 (r5442) @@ -9,6 +9,7 @@ #include <string.h> #include <stdint.h> #include <arch/pirq_routing.h> +#include <cpu/amd/amdk8_sysconf.h>
static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3,
Modified: trunk/src/mainboard/sunw/ultra40/mptable.c ============================================================================== --- trunk/src/mainboard/sunw/ultra40/mptable.c Thu Apr 15 10:26:30 2010 (r5441) +++ trunk/src/mainboard/sunw/ultra40/mptable.c Thu Apr 15 14:39:29 2010 (r5442) @@ -3,6 +3,7 @@ #include <device/pci.h> #include <string.h> #include <stdint.h> +#include <cpu/amd/amdk8_sysconf.h>
extern unsigned char bus_isa; extern unsigned char bus_ck804_0; //1 @@ -32,8 +33,6 @@ extern unsigned sbdn3; extern unsigned sbdnb;
- - static void *smp_write_config_table(void *v) { static const char sig[4] = "PCMP";
Modified: trunk/src/mainboard/supermicro/h8dme/romstage.c ============================================================================== --- trunk/src/mainboard/supermicro/h8dme/romstage.c Thu Apr 15 10:26:30 2010 (r5441) +++ trunk/src/mainboard/supermicro/h8dme/romstage.c Thu Apr 15 14:39:29 2010 (r5442) @@ -77,10 +77,6 @@
#include "southbridge/nvidia/mcp55/mcp55_early_ctrl.c"
-static void memreset_setup(void) -{ -} - static void memreset(int controllers, const struct mem_controller *ctrl) { } @@ -154,12 +150,9 @@ }
#include "northbridge/amd/amdk8/amdk8_f.h" -#include "northbridge/amd/amdk8/coherent_ht.c" - #include "northbridge/amd/amdk8/incoherent_ht.c" - +#include "northbridge/amd/amdk8/coherent_ht.c" #include "northbridge/amd/amdk8/raminit_f.c" - #include "lib/generic_sdram.c"
#include "resourcemap.c" @@ -175,8 +168,6 @@ #include "southbridge/nvidia/mcp55/mcp55_early_setup_ss.h" #include "southbridge/nvidia/mcp55/mcp55_early_setup_car.c"
- - #include "cpu/amd/car/post_cache_as_ram.c"
#include "cpu/amd/model_fxx/init_cpus.c" @@ -340,8 +331,6 @@
enable_smbus(); /* enable in sio_setup */
- memreset_setup(); - //do we need apci timer, tsc...., only debug need it for better output /* all ap stopped? */ // init_timer(); // Need to use TMICT to synconize FID/VID
Modified: trunk/src/mainboard/supermicro/h8dmr/romstage.c ============================================================================== --- trunk/src/mainboard/supermicro/h8dmr/romstage.c Thu Apr 15 10:26:30 2010 (r5441) +++ trunk/src/mainboard/supermicro/h8dmr/romstage.c Thu Apr 15 14:39:29 2010 (r5442) @@ -80,10 +80,6 @@
#include "southbridge/nvidia/mcp55/mcp55_early_ctrl.c"
-static void memreset_setup(void) -{ -} - static void memreset(int controllers, const struct mem_controller *ctrl) { } @@ -99,12 +95,9 @@ }
#include "northbridge/amd/amdk8/amdk8_f.h" -#include "northbridge/amd/amdk8/coherent_ht.c" - #include "northbridge/amd/amdk8/incoherent_ht.c" - +#include "northbridge/amd/amdk8/coherent_ht.c" #include "northbridge/amd/amdk8/raminit_f.c" - #include "lib/generic_sdram.c"
#include "resourcemap.c" @@ -120,8 +113,6 @@ #include "southbridge/nvidia/mcp55/mcp55_early_setup_ss.h" #include "southbridge/nvidia/mcp55/mcp55_early_setup_car.c"
- - #include "cpu/amd/car/post_cache_as_ram.c"
#include "cpu/amd/model_fxx/init_cpus.c" @@ -263,8 +254,6 @@
// enable_smbus(); /* enable in sio_setup */
- memreset_setup(); - //do we need apci timer, tsc...., only debug need it for better output /* all ap stopped? */ // init_timer(); // Need to use TMICT to synconize FID/VID @@ -272,6 +261,4 @@ sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo);
post_cache_as_ram(); // bsp swtich stack to ram and copy sysinfo ram now - } -
Modified: trunk/src/mainboard/technexion/tim5690/mainboard.c ============================================================================== --- trunk/src/mainboard/technexion/tim5690/mainboard.c Thu Apr 15 10:26:30 2010 (r5441) +++ trunk/src/mainboard/technexion/tim5690/mainboard.c Thu Apr 15 14:39:29 2010 (r5442) @@ -21,8 +21,7 @@ #include <device/device.h> #include <device/pci.h> #include <arch/io.h> -#include <boot/coreboot_tables.h> -#include <arch/coreboot_tables.h> +#include <boot/tables.h> #include <cpu/x86/msr.h> #include <cpu/amd/mtrr.h> #include <device/pci_def.h> @@ -179,7 +178,7 @@ }
/* Mainboard specific GPIO setup. */ -void mb_gpio_init(u16 *iobase) +static void mb_gpio_init(u16 *iobase) { /* Init Super I/O GPIOs. */ it8712f_enter_conf(); @@ -193,7 +192,7 @@ }
/* The LCD's panel id seletion. */ -void lcd_panel_id(rs690_vbios_regs *vbios_regs, u8 num_id) +static void lcd_panel_id(rs690_vbios_regs *vbios_regs, u8 num_id) { switch (num_id) { case 0x1: @@ -226,9 +225,6 @@ *************************************************/ static void tim5690_enable(device_t dev) { - struct mainboard_config *mainboard = - (struct mainboard_config *)dev->chip_info; - rs690_vbios_regs vbios_regs; u16 gpio_base = IT8712F_SIMPLE_IO_BASE; u8 port2; @@ -240,6 +236,7 @@ /* The LCD's panel id seletion by switch. */ port2 = inb(gpio_base+1); lcd_panel_id(&vbios_regs, ((~port2) & 0xf)); + /* No support TV */ vbios_regs.int15_regs.fun05_tv_standard = TV_MODE_NO; vgabios_init(&vbios_regs);
Modified: trunk/src/mainboard/technexion/tim5690/vgabios.c ============================================================================== --- trunk/src/mainboard/technexion/tim5690/vgabios.c Thu Apr 15 10:26:30 2010 (r5441) +++ trunk/src/mainboard/technexion/tim5690/vgabios.c Thu Apr 15 14:39:29 2010 (r5442) @@ -36,6 +36,7 @@ vbios_regs_local.int15_regs.fun00_panel_id = vbios_regs->int15_regs.fun00_panel_id; vbios_regs_local.int15_regs.fun05_tv_standard = vbios_regs->int15_regs.fun05_tv_standard; } + /* BIOS int15 function */ int tim5690_int15_handler(struct eregs *regs) {
Modified: trunk/src/mainboard/technexion/tim8690/mainboard.c ============================================================================== --- trunk/src/mainboard/technexion/tim8690/mainboard.c Thu Apr 15 10:26:30 2010 (r5441) +++ trunk/src/mainboard/technexion/tim8690/mainboard.c Thu Apr 15 14:39:29 2010 (r5442) @@ -21,12 +21,11 @@ #include <device/device.h> #include <device/pci.h> #include <arch/io.h> -#include <boot/coreboot_tables.h> -#include <arch/coreboot_tables.h> +#include <boot/tables.h> #include <cpu/x86/msr.h> #include <cpu/amd/mtrr.h> #include <device/pci_def.h> -#include <../southbridge/amd/sb600/sb600.h> +#include <southbridge/amd/sb600/sb600.h> #include "chip.h"
#define ADT7461_ADDRESS 0x4C @@ -36,8 +35,6 @@ extern int do_smbus_read_byte(u32 smbus_io_base, u32 device, u32 address); extern int do_smbus_write_byte(u32 smbus_io_base, u32 device, u32 address, u8 val); -extern void lb_add_memory_range(struct lb_memory *mem, uint32_t type, - uint64_t start, uint64_t size); #define ADT7461_read_byte(address) \ do_smbus_read_byte(SMBUS_IO_BASE, ADT7461_ADDRESS, address) #define ARA_read_byte(address) \
Modified: trunk/src/mainboard/tyan/s2735/romstage.c ============================================================================== --- trunk/src/mainboard/tyan/s2735/romstage.c Thu Apr 15 10:26:30 2010 (r5441) +++ trunk/src/mainboard/tyan/s2735/romstage.c Thu Apr 15 14:39:29 2010 (r5442) @@ -15,7 +15,6 @@ #include "southbridge/intel/i82801ex/i82801ex_early_smbus.c" #include "northbridge/intel/e7501/raminit.h"
-#include "cpu/x86/lapic/boot_cpu.c" #include "northbridge/intel/e7501/debug.c" #include "superio/winbond/w83627hf/w83627hf_early_serial.c"
Modified: trunk/src/mainboard/tyan/s2912/romstage.c ============================================================================== --- trunk/src/mainboard/tyan/s2912/romstage.c Thu Apr 15 10:26:30 2010 (r5441) +++ trunk/src/mainboard/tyan/s2912/romstage.c Thu Apr 15 14:39:29 2010 (r5442) @@ -83,10 +83,6 @@
#include "southbridge/nvidia/mcp55/mcp55_early_ctrl.c"
-static void memreset_setup(void) -{ -} - static void memreset(int controllers, const struct mem_controller *ctrl) { } @@ -102,12 +98,9 @@ }
#include "northbridge/amd/amdk8/amdk8_f.h" -#include "northbridge/amd/amdk8/coherent_ht.c" - #include "northbridge/amd/amdk8/incoherent_ht.c" - +#include "northbridge/amd/amdk8/coherent_ht.c" #include "northbridge/amd/amdk8/raminit_f.c" - #include "lib/generic_sdram.c"
#include "resourcemap.c" @@ -130,8 +123,6 @@ #include "southbridge/nvidia/mcp55/mcp55_early_setup_ss.h" #include "southbridge/nvidia/mcp55/mcp55_early_setup_car.c"
- - #include "cpu/amd/car/post_cache_as_ram.c"
#include "cpu/amd/model_fxx/init_cpus.c" @@ -271,8 +262,6 @@
enable_smbus();
- memreset_setup(); - //do we need apci timer, tsc...., only debug need it for better output /* all ap stopped? */ // init_timer(); // Need to use TMICT to synconize FID/VID @@ -280,6 +269,4 @@ sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo);
post_cache_as_ram(); // bsp swtich stack to ram and copy sysinfo ram now - } -
Modified: trunk/src/mainboard/via/epia-m700/Makefile.inc ============================================================================== --- trunk/src/mainboard/via/epia-m700/Makefile.inc Thu Apr 15 10:26:30 2010 (r5441) +++ trunk/src/mainboard/via/epia-m700/Makefile.inc Thu Apr 15 14:39:29 2010 (r5442) @@ -19,5 +19,8 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ##
-obj-y += wakeup.o +# This code is unused and should be replaced by the generic resume code +# completely. If anyone works on wakeup for this chipset/board, delete +# wakeup.c when you are done. +# obj-y += wakeup.o
Modified: trunk/src/mainboard/via/epia-m700/wakeup.c ============================================================================== --- trunk/src/mainboard/via/epia-m700/wakeup.c Thu Apr 15 10:26:30 2010 (r5441) +++ trunk/src/mainboard/via/epia-m700/wakeup.c Thu Apr 15 14:39:29 2010 (r5442) @@ -19,6 +19,10 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */
+/* FIXME This code should be dropped and instead the generic resume code + * should be used. + */ + /* Parts of this code is taken from reboot.c from Linux. */
/* @@ -96,19 +100,6 @@ 0xea, 0x00, 0x00, 0x00, 0xe0 /* ljmp $0xffff, $0x0000 */ };
-/* - * Switch to real mode and then execute the code - * specified by the code and length parameters. - * We assume that length will aways be less that 100! - */ -static unsigned char show31[6] = { - 0xb0, 0x31, 0xe6, 0x80, 0xeb, 0xFA /* ljmp $0xffff, $0x0000 */ -}; - -static unsigned char show32[6] = { - 0xb0, 0x32, 0xe6, 0x80, 0xeb, 0xFA /* ljmp $0xffff, $0x0000 */ -}; - void acpi_jump_wake(u32 vector) { u32 dwEip; @@ -337,8 +328,6 @@ * Enable A20 gate (return -1 on failure) */
-// #include "boot.h" - #define MAX_8042_LOOPS 100000
static int empty_8042(void) @@ -375,13 +364,9 @@ int ok = 0; int saved, ctr;
-// set_fs(0x0000); -// set_gs(0xffff); - saved = ctr = *((u32 *) A20_TEST_ADDR);
while (loops--) { - //wrfs32(++ctr, A20_TEST_ADDR);
*((u32 *) A20_TEST_ADDR) = ++ctr;
Modified: trunk/src/mainboard/via/epia-n/mainboard.c ============================================================================== --- trunk/src/mainboard/via/epia-n/mainboard.c Thu Apr 15 10:26:30 2010 (r5441) +++ trunk/src/mainboard/via/epia-n/mainboard.c Thu Apr 15 14:39:29 2010 (r5442) @@ -23,8 +23,8 @@ #include <device/pci.h> #include <device/pci_ids.h> #include <boot/tables.h> +#include <southbridge/via/vt8237r/vt8237r.h> #include "chip.h" -#include "../../../southbridge/via/vt8237r/vt8237r.h"
int add_mainboard_resources(struct lb_memory *mem) {
Modified: trunk/src/northbridge/amd/amdk8/raminit_f.c ============================================================================== --- trunk/src/northbridge/amd/amdk8/raminit_f.c Thu Apr 15 10:26:30 2010 (r5441) +++ trunk/src/northbridge/amd/amdk8/raminit_f.c Thu Apr 15 14:39:29 2010 (r5442) @@ -718,12 +718,14 @@
static int is_opteron(const struct mem_controller *ctrl) { - /* Test to see if I am an Opteron. - * FIXME Testing dual channel capability is correct for now - * but a better test is probably required. - * m2 and s1g1 support dual channel too. but only support unbuffered dimm + /* Test to see if I am an Opteron. M2 and S1G1 support dual + * channel, too, but only support unbuffered DIMMs so we need a + * better test for Opterons. + * However, all code uses is_opteron() to find out whether to + * use dual channel, so if we really check for opteron here, we + * need to fix up all code using this function, too. */ -#warning "FIXME implement a better test for opterons" + uint32_t nbcap; nbcap = pci_read_config32(ctrl->f3, NORTHBRIDGE_CAP); return !!(nbcap & NBCAP_128Bit);
Modified: trunk/src/northbridge/intel/e7501/debug.c ============================================================================== --- trunk/src/northbridge/intel/e7501/debug.c Thu Apr 15 10:26:30 2010 (r5441) +++ trunk/src/northbridge/intel/e7501/debug.c Thu Apr 15 14:39:29 2010 (r5442) @@ -13,7 +13,7 @@ print_debug_hex8((dev >> 8) & 7); }
-static void print_pci_devices(void) +static inline void print_pci_devices(void) { device_t dev; for(dev = PCI_DEV(0, 0, 0); @@ -58,7 +58,7 @@ print_debug("\n"); }
-static void dump_pci_devices(void) +static inline void dump_pci_devices(void) { device_t dev; for(dev = PCI_DEV(0, 0, 0); @@ -75,7 +75,7 @@ } }
-static void dump_pci_devices_on_bus(unsigned busn) +static inline void dump_pci_devices_on_bus(unsigned busn) { device_t dev; for(dev = PCI_DEV(busn, 0, 0); @@ -92,7 +92,7 @@ } }
-static void dump_spd_registers(const struct mem_controller *ctrl) +static inline void dump_spd_registers(const struct mem_controller *ctrl) { int i; print_debug("\n"); @@ -174,7 +174,7 @@ } } } -static void dump_smbus_registers(void) +static inline void dump_smbus_registers(void) { unsigned device; print_debug("\n"); @@ -215,7 +215,7 @@ } }
-static void dump_io_resources(unsigned port) +static inline void dump_io_resources(unsigned port) {
int i; @@ -249,7 +249,7 @@ } }
-static void dump_mem(unsigned start, unsigned end) +static inline void dump_mem(unsigned start, unsigned end) { unsigned i; print_debug("dump_mem:");
Modified: trunk/src/northbridge/intel/e7501/raminit.c ============================================================================== --- trunk/src/northbridge/intel/e7501/raminit.c Thu Apr 15 10:26:30 2010 (r5441) +++ trunk/src/northbridge/intel/e7501/raminit.c Thu Apr 15 14:39:29 2010 (r5442) @@ -24,9 +24,9 @@
#if CONFIG_DEBUG_RAM_SETUP #define RAM_DEBUG_MESSAGE(x) print_debug(x) -#define RAM_DEBUG_HEX32(x) print_debug_hex32(x) -#define RAM_DEBUG_HEX8(x) print_debug_hex8(x) -#define DUMPNORTH() dump_pci_device(PCI_DEV(0, 0, 0)) +#define RAM_DEBUG_HEX32(x) print_debug_hex32(x) +#define RAM_DEBUG_HEX8(x) print_debug_hex8(x) +#define DUMPNORTH() dump_pci_device(PCI_DEV(0, 0, 0)) #else #define RAM_DEBUG_MESSAGE(x) #define RAM_DEBUG_HEX32(x) @@ -35,23 +35,23 @@ #endif
#define E7501_SDRAM_MODE (SDRAM_BURST_INTERLEAVED | SDRAM_BURST_4) -#define SPD_ERROR "Error reading SPD info\n" +#define SPD_ERROR "Error reading SPD info\n"
// NOTE: This used to be 0x100000. -// That doesn't work on systems where A20M# is asserted, because -// attempts to access 0x1000NN end up accessing 0x0000NN. +// That doesn't work on systems where A20M# is asserted, because +// attempts to access 0x1000NN end up accessing 0x0000NN. #define RCOMP_MMIO 0x200000
struct dimm_size { - unsigned long side1; - unsigned long side2; + unsigned long side1; + unsigned long side2; };
/*^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^*/ -/* DEFINITIONS */ +/* DEFINITIONS */ /**********************************************************************************/
-static const uint32_t refresh_frequency[]= { +static const uint32_t refresh_frequency[] = { /* Relative frequency (array value) of each E7501 Refresh Mode Select * (RMS) value (array index) * 0 == least frequent refresh (longest interval between refreshes) @@ -64,7 +64,8 @@ * [6] reserved -> 0 * [7] 64 clocks -> 4 */ - 0, 2, 3, 1, 0, 0, 0, 4 }; + 0, 2, 3, 1, 0, 0, 0, 4 +};
static const uint32_t refresh_rate_map[] = { /* Map the JEDEC spd refresh rates (array index) to E7501 Refresh Mode @@ -73,7 +74,7 @@ * The E7501 supports only 15.6 us (1), 7.8 us (2), 64 us (3), and * 64 clock (481 ns) (7) refresh. * [0] == 15.625 us -> 15.6 us - * [1] == 3.9 us -> 481 ns + * [1] == 3.9 us -> 481 ns * [2] == 7.8 us -> 7.8 us * [3] == 31.3 us -> 15.6 us * [4] == 62.5 us -> 15.6 us @@ -81,22 +82,22 @@ */ 1, 7, 2, 1, 1, 3 }; -#define MAX_SPD_REFRESH_RATE ((sizeof(refresh_rate_map) / sizeof(uint32_t)) - 1)
+#define MAX_SPD_REFRESH_RATE ((sizeof(refresh_rate_map) / sizeof(uint32_t)) - 1)
// SPD parameters that must match for dual-channel operation static const uint8_t dual_channel_parameters[] = { - SPD_MEMORY_TYPE, - SPD_MODULE_VOLTAGE, - SPD_NUM_COLUMNS, - SPD_NUM_ROWS, - SPD_NUM_DIMM_BANKS, - SPD_PRIMARY_SDRAM_WIDTH, + SPD_MEMORY_TYPE, + SPD_MODULE_VOLTAGE, + SPD_NUM_COLUMNS, + SPD_NUM_ROWS, + SPD_NUM_DIMM_BANKS, + SPD_PRIMARY_SDRAM_WIDTH, SPD_NUM_BANKS_PER_SDRAM };
/* - * Table: constant_register_values + * Table: constant_register_values */ static const long constant_register_values[] = { /* SVID - Subsystem Vendor Identification Register @@ -107,9 +108,9 @@ * 0x2e - 0x2f * [15:00] Subsystem ID */ - // Not everyone wants to be Super Micro Computer, Inc. - // The mainboard should set this if desired. - // 0x2c, 0, (0x15d9 << 0) | (0x3580 << 16), + // Not everyone wants to be Super Micro Computer, Inc. + // The mainboard should set this if desired. + // 0x2c, 0, (0x15d9 << 0) | (0x3580 << 16),
/* Undocumented * (DRAM Read Timing Control, if similar to 855PM?) @@ -128,7 +129,7 @@ * work at all. * Steven James 02/06/2003 */ - /* NOTE: values now configured in configure_e7501_cas_latency() based + /* NOTE: values now configured in configure_e7501_cas_latency() based * on SPD info and total number of DIMMs (per Intel) */
@@ -172,15 +173,15 @@ */ // Conservatively say each row has 64MB of ram, we will fix this up later // NOTE: These defaults allow us to prime all of the DIMMs on the board - // without jumping through 36-bit adddressing hoops, even if the - // total memory is > 4 GB. Changing these values may break do_ram_command()! + // without jumping through 36-bit adddressing hoops, even if the + // total memory is > 4 GB. Changing these values may break do_ram_command()! 0x60, 0x00000000, (0x01 << 0) | (0x02 << 8) | (0x03 << 16) | (0x04 << 24), 0x64, 0x00000000, (0x05 << 0) | (0x06 << 8) | (0x07 << 16) | (0x08 << 24),
/* DRA - DRAM Row Attribute Register * 0x70 Row 0,1 * 0x71 Row 2,3 - * 0x72 Row 4,5 + * 0x72 Row 4,5 * 0x73 Row 6,7 * [7:7] Device width for Odd numbered rows * 0 == 8 bits wide x8 @@ -201,7 +202,7 @@ * 101 == 64KB (This page size appears broken) * Others == Reserved */ - // NOTE: overridden by configure_e7501_row_attributes(), later + // NOTE: overridden by configure_e7501_row_attributes(), later 0x70, 0x00000000, 0,
/* DRT - DRAM Timing Register @@ -223,9 +224,9 @@ * Others == Reserved * [23:19] Reserved * [18:16] DRAM idle timer - * 000 == infinite - * 011 == 16 dram clocks - * 001 == 0 clocks + * 000 == infinite + * 011 == 16 dram clocks + * 001 == 0 clocks * [15:11] Reserved * [10:09] Active to Precharge (tRAS) * 00 == 7 clocks @@ -241,9 +242,9 @@ * [03:03] Write Ras# to Cas# Delay (tRCD) * 0 == 3 DRAM Clocks * 1 == 2 DRAM Clocks - * [02:01] Read RAS# to CAS# Delay (tRCD) - * 00 == reserved - * 01 == reserved + * [02:01] Read RAS# to CAS# Delay (tRCD) + * 00 == reserved + * 01 == reserved * 10 == 3 DRAM Clocks * 11 == 2 DRAM Clocks * [00:00] DRAM RAS# to Precharge (tRP) @@ -251,15 +252,15 @@ * 1 == 2 DRAM Clocks */
- // Some earlier settings: + // Some earlier settings: /* Most aggressive settings possible */ -// 0x78, 0xc0fff8c4, (1<<29)|(1<<28)|(1<<27)|(2<<24)|(2<<9)|CAS_LATENCY|(1<<3)|(1<<1)|(1<<0), -// 0x78, 0xc0f8f8c0, (1<<29)|(1<<28)|(1<<27)|(1<<24)|(1<<16)|(2<<9)|CAS_LATENCY|(1<<3)|(3<<1)|(1<<0), -// 0x78, 0xc0f8f9c0, (1<<29)|(1<<28)|(1<<27)|(1<<24)|(1<<16)|(2<<9)|CAS_LATENCY|(1<<3)|(3<<1)|(1<<0), +// 0x78, 0xc0fff8c4, (1<<29)|(1<<28)|(1<<27)|(2<<24)|(2<<9)|CAS_LATENCY|(1<<3)|(1<<1)|(1<<0), +// 0x78, 0xc0f8f8c0, (1<<29)|(1<<28)|(1<<27)|(1<<24)|(1<<16)|(2<<9)|CAS_LATENCY|(1<<3)|(3<<1)|(1<<0), +// 0x78, 0xc0f8f9c0, (1<<29)|(1<<28)|(1<<27)|(1<<24)|(1<<16)|(2<<9)|CAS_LATENCY|(1<<3)|(3<<1)|(1<<0),
// The only things we need to set here are DRAM idle timer, Back-to-Back Read Turnaround, and // Back-to-Back Write-Read Turnaround. All others are configured based on SPD. - 0x78, 0xD7F8FFFF, (1<<29)|(1<<27)|(1<<16), + 0x78, 0xD7F8FFFF, (1 << 29) | (1 << 27) | (1 << 16),
/* FIXME why was I attempting to set a reserved bit? */ /* 0x0100040f */ @@ -271,9 +272,9 @@ * 0 == Not Complete * 1 == Complete * [28:23] Reserved - * [22:22] Channels - * 0 == Single channel - * 1 == Dual Channel + * [22:22] Channels + * 0 == Single channel + * 1 == Dual Channel * [21:20] DRAM Data Integrity Mode * 00 == Disabled, no ECC * 01 == Reserved @@ -281,10 +282,10 @@ * 11 == Reserved * [19:18] DRB Granularity (Read-Only) * 00 == 32 MB quantities (single channel mode) - * 01 == 64 MB quantities (dual-channel mode) - * 10 == Reserved - * 11 == Reserved - * [17:17] (Intel Undocumented) should always be set to 1 (SJM: comment inconsistent with current setting, below) + * 01 == 64 MB quantities (dual-channel mode) + * 10 == Reserved + * 11 == Reserved + * [17:17] (Intel Undocumented) should always be set to 1 (SJM: comment inconsistent with current setting, below) * [16:16] Command Per Clock - Address/Control Assertion Rule (CPC) * 0 == 2n Rule * 1 == 1n rule @@ -301,42 +302,42 @@ * 001 == NOP Command * 010 == All Banks Precharge * 011 == Mode Register Set - * 100 == Extended Mode Register Set + * 100 == Extended Mode Register Set * 101 == Reserved * 110 == CBR Refresh * 111 == Normal Operation * [03:00] Reserved */ -// .long 0x7c, 0xffcefcff, (1<<22)|(2 << 20)|(1 << 16)| (0 << 8), -// .long 0x7c, 0xff8cfcff, (1<<22)|(2 << 20)|(1 << 17)|(1 << 16)| (0 << 8), -// .long 0x7c, 0xff80fcff, (1<<22)|(2 << 20)|(1 << 18)|(1 << 17)|(1 << 16)| (0 << 8), +// .long 0x7c, 0xffcefcff, (1<<22)|(2 << 20)|(1 << 16)| (0 << 8), +// .long 0x7c, 0xff8cfcff, (1<<22)|(2 << 20)|(1 << 17)|(1 << 16)| (0 << 8), +// .long 0x7c, 0xff80fcff, (1<<22)|(2 << 20)|(1 << 18)|(1 << 17)|(1 << 16)| (0 << 8),
// Default to dual-channel mode, ECC, 1-clock address/cmd hold // NOTE: configure_e7501_dram_controller_mode() configures further - 0x7c, 0xff8ef8ff, (1<<22)|(2<<20)|(1<<16)|(0<<8), + 0x7c, 0xff8ef8ff, (1 << 22) | (2 << 20) | (1 << 16) | (0 << 8),
/* Another Intel undocumented register * 0x88 - 0x8B - * [31:31] Purpose unknown - * [26:26] Master DLL Reset? - * 0 == Normal operation? - * 1 == Reset? - * [07:07] Periodic memory recalibration? - * 0 == Disabled? - * 1 == Enabled? - * [04:04] Receive FIFO RE-Sync? - * 0 == Normal operation? - * 1 == Reset? + * [31:31] Purpose unknown + * [26:26] Master DLL Reset? + * 0 == Normal operation? + * 1 == Reset? + * [07:07] Periodic memory recalibration? + * 0 == Disabled? + * 1 == Enabled? + * [04:04] Receive FIFO RE-Sync? + * 0 == Normal operation? + * 1 == Reset? */ - // NOTE: Some factory BIOSs don't do this. - // Doesn't seem to matter either way. + // NOTE: Some factory BIOSs don't do this. + // Doesn't seem to matter either way. 0x88, 0xffffff00, 0x80,
/* CLOCK_DIS - CK/CK# Disable Register * 0x8C * [7:7] DDR Frequency - * 0 == 100 MHz (200 MHz data rate) - * 1 == 133 MHz (266 MHz data rate) + * 0 == 100 MHz (200 MHz data rate) + * 1 == 133 MHz (266 MHz data rate) * [6:4] Reserved * [3:3] CK3 * 0 == Enable @@ -352,7 +353,7 @@ * 1 == Disable */ // NOTE: Disable all clocks initially; turn ones we need back on - // in enable_e7501_clocks() + // in enable_e7501_clocks() 0x8C, 0xfffffff0, 0xf,
/* TOLM - Top of Low Memory Register @@ -383,23 +384,23 @@ /* DVNP - Device Not Present Register * 0xE0 - 0xE1 * [15:05] Reserved - * [04:04] Device 4 Function 1 Present + * [04:04] Device 4 Function 1 Present * 0 == Present * 1 == Absent - * [03:03] Device 3 Function 1 Present + * [03:03] Device 3 Function 1 Present * 0 == Present * 1 == Absent - * [02:02] Device 2 Function 1 Present + * [02:02] Device 2 Function 1 Present * 0 == Present * 1 == Absent - * [01:01] Reserved - * [00:00] Device 0 Function 1 Present + * [01:01] Reserved + * [00:00] Device 0 Function 1 Present * 0 == Present * 1 == Absent */
// Enable D0:D1, disable D2:F1, D3:F1, D4:F1 - 0xe0, 0xffffffe2, (1<<4)|(1<<3)|(1<<2)|(0<<0), + 0xe0, 0xffffffe2, (1 << 4) | (1 << 3) | (1 << 2) | (0 << 0),
// Undocumented 0xd8, 0xffff9fff, 0x00000000, @@ -410,22 +411,22 @@ * [31:31] Purpose unknown * [30:30] Purpose unknown * [29:23] Unknown - not used? - * [22:22] System Memory MMR Enable + * [22:22] System Memory MMR Enable * 0 == Disable: mem space and BAR at 0x14 are not accessible * 1 == Enable: mem space and BAR at 0x14 are accessible * [21:20] Purpose unknown - * [19:02] Unknown - not used? - * [01:01] D6EN (Device #6 enable) + * [19:02] Unknown - not used? + * [01:01] D6EN (Device #6 enable) * 0 == Disable * 1 == Enable - * [00:00] Unknown - not used? + * [00:00] Unknown - not used? */
0xf4, 0x3f8ffffd, 0x40300002,
#ifdef SUSPICIOUS_LOOKING_CODE // SJM: Undocumented. - // This will access D2:F0:0x50, is this correct?? + // This will access D2:F0:0x50, is this correct?? 0x1050, 0xffffffcf, 0x00000030, #endif }; @@ -453,29 +454,31 @@ /*^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^*/ /* TABLES */ /**********************************************************************************/ -#define SLOW_DOWN_IO inb(0x80); +#define SLOW_DOWN_IO inb(0x80) //#define SLOW_DOWN_IO udelay(40);
- /* Estimate that SLOW_DOWN_IO takes about 50&76us*/ + /* Estimate that SLOW_DOWN_IO takes about 50&76us */ /* delay for 200us */
#if 1 static void do_delay(void) { int i; - for(i = 0; i < 16; i++) { SLOW_DOWN_IO } + for (i = 0; i < 16; i++) { + SLOW_DOWN_IO; + } } -#define DO_DELAY do_delay(); + +#define DO_DELAY do_delay() #else #define DO_DELAY \ - udelay(200); -#endif + udelay(200) +#endif
#define EXTRA_DELAY DO_DELAY
- /*^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^*/ -/* DELAY FUNCTIONS */ +/* DELAY FUNCTIONS */ /**********************************************************************************/
static void die_on_spd_error(int spd_return_value) @@ -485,90 +488,100 @@ }
//---------------------------------------------------------------------------------- -// Function: sdram_spd_get_page_size -// Parameters: dimm_socket_address - SMBus address of DIMM socket to interrogate -// Return Value: struct dimm_size - log2(page size) for each side of the DIMM. -// Description: Calculate the page size for each physical bank of the DIMM: -// log2(page size) = (# columns) + log2(data width) +// Function: sdram_spd_get_page_size +// Parameters: dimm_socket_address - SMBus address of DIMM socket to interrogate +// Return Value: struct dimm_size - log2(page size) for each side of the DIMM. +// Description: Calculate the page size for each physical bank of the DIMM: +// log2(page size) = (# columns) + log2(data width) // -// NOTE: page size is the total number of data bits in a row. +// NOTE: page size is the total number of data bits in a row. // -static struct dimm_size sdram_spd_get_page_size(uint16_t dimm_socket_address) +static struct dimm_size sdram_spd_get_page_size(uint16_t + dimm_socket_address) { uint16_t module_data_width; int value; struct dimm_size pgsz;
pgsz.side1 = 0; - pgsz.side2 = 0; - + pgsz.side2 = 0; + // Side 1 - value = spd_read_byte(dimm_socket_address, SPD_NUM_COLUMNS); - if (value < 0) goto hw_err; - pgsz.side1 = value & 0xf; // # columns in bank 1 - + value = spd_read_byte(dimm_socket_address, SPD_NUM_COLUMNS); + if (value < 0) + goto hw_err; + pgsz.side1 = value & 0xf; // # columns in bank 1 + /* Get the module data width and convert it to a power of two */ - value = spd_read_byte(dimm_socket_address, SPD_MODULE_DATA_WIDTH_MSB); - if (value < 0) goto hw_err; + value = + spd_read_byte(dimm_socket_address, SPD_MODULE_DATA_WIDTH_MSB); + if (value < 0) + goto hw_err; module_data_width = (value & 0xff) << 8;
- value = spd_read_byte(dimm_socket_address, SPD_MODULE_DATA_WIDTH_LSB); - if (value < 0) goto hw_err; + value = + spd_read_byte(dimm_socket_address, SPD_MODULE_DATA_WIDTH_LSB); + if (value < 0) + goto hw_err; module_data_width |= (value & 0xff);
pgsz.side1 += log2(module_data_width);
/* side two */ value = spd_read_byte(dimm_socket_address, SPD_NUM_DIMM_BANKS); - if (value < 0) goto hw_err; - if (value > 2) + if (value < 0) + goto hw_err; + if (value > 2) die("Bad SPD value\n"); if (value == 2) {
- pgsz.side2 = pgsz.side1; // Assume symmetric banks until we know differently - value = spd_read_byte(dimm_socket_address, SPD_NUM_COLUMNS); - if (value < 0) goto hw_err; + pgsz.side2 = pgsz.side1; // Assume symmetric banks until we know differently + value = + spd_read_byte(dimm_socket_address, SPD_NUM_COLUMNS); + if (value < 0) + goto hw_err; if ((value & 0xf0) != 0) { // Asymmetric banks - pgsz.side2 -= value & 0xf; /* Subtract out columns on side 1 */ - pgsz.side2 += (value>>4) & 0xf; /* Add in columns on side 2 */ + pgsz.side2 -= value & 0xf; /* Subtract out columns on side 1 */ + pgsz.side2 += (value >> 4) & 0xf; /* Add in columns on side 2 */ } }
- return pgsz; + return pgsz;
-hw_err: + hw_err: die(SPD_ERROR); - return pgsz; // Never reached + return pgsz; // Never reached }
- //---------------------------------------------------------------------------------- -// Function: sdram_spd_get_width -// Parameters: dimm_socket_address - SMBus address of DIMM socket to interrogate -// Return Value: dimm_size - width in bits of each DIMM side's DRAMs. -// Description: Read the width in bits of each DIMM side's DRAMs via SPD. -// (i.e. 4, 8, 16) +// Function: sdram_spd_get_width +// Parameters: dimm_socket_address - SMBus address of DIMM socket to interrogate +// Return Value: dimm_size - width in bits of each DIMM side's DRAMs. +// Description: Read the width in bits of each DIMM side's DRAMs via SPD. +// (i.e. 4, 8, 16) // -static struct dimm_size sdram_spd_get_width(uint16_t dimm_socket_address) +static struct dimm_size sdram_spd_get_width(uint16_t dimm_socket_address) { int value; struct dimm_size width; - + width.side1 = 0; width.side2 = 0;
- value = spd_read_byte(dimm_socket_address, SPD_PRIMARY_SDRAM_WIDTH); + value = + spd_read_byte(dimm_socket_address, SPD_PRIMARY_SDRAM_WIDTH); die_on_spd_error(value); - - width.side1 = value & 0x7f; // Mask off bank 2 flag + + width.side1 = value & 0x7f; // Mask off bank 2 flag
if (value & 0x80) { width.side2 = width.side1 << 1; // Bank 2 exists and is double-width } else { // If bank 2 exists, it's the same width as bank 1 - value = spd_read_byte(dimm_socket_address, SPD_NUM_DIMM_BANKS); - die_on_spd_error(value); + value = + spd_read_byte(dimm_socket_address, SPD_NUM_DIMM_BANKS); + die_on_spd_error(value);
#ifdef ROMCC_IF_BUG_FIXED if (value == 2) @@ -587,94 +600,100 @@
return width; } - + //---------------------------------------------------------------------------------- -// Function: spd_get_dimm_size -// Parameters: dimm_socket_address - SMBus address of DIMM socket to interrogate -// Return Value: dimm_size - log2(number of bits) for each side of the DIMM -// Description: Calculate the log base 2 size in bits of both DIMM sides. -// log2(# bits) = (# columns) + log2(data width) + -// (# rows) + log2(banks per SDRAM) -// -// Note that it might be easier to use SPD byte 31 here, it has the -// DIMM size as a multiple of 4MB. The way we do it now we can size -// both sides of an asymmetric dimm. +// Function: spd_get_dimm_size +// Parameters: dimm_socket_address - SMBus address of DIMM socket to interrogate +// Return Value: dimm_size - log2(number of bits) for each side of the DIMM +// Description: Calculate the log base 2 size in bits of both DIMM sides. +// log2(# bits) = (# columns) + log2(data width) + +// (# rows) + log2(banks per SDRAM) +// +// Note that it might be easier to use SPD byte 31 here, it has the +// DIMM size as a multiple of 4MB. The way we do it now we can size +// both sides of an asymmetric dimm. // static struct dimm_size spd_get_dimm_size(unsigned dimm_socket_address) { - int value; + int value;
// Start with log2(page size) - struct dimm_size sz = sdram_spd_get_page_size(dimm_socket_address); + struct dimm_size sz = sdram_spd_get_page_size(dimm_socket_address);
if (sz.side1 > 0) {
value = spd_read_byte(dimm_socket_address, SPD_NUM_ROWS); die_on_spd_error(value);
- sz.side1 += value & 0xf; + sz.side1 += value & 0xf;
if (sz.side2 > 0) {
// Double-sided DIMM if (value & 0xF0) - sz.side2 += value >> 4; // Asymmetric + sz.side2 += value >> 4; // Asymmetric else - sz.side2 += value; // Symmetric + sz.side2 += value; // Symmetric }
- value = spd_read_byte(dimm_socket_address, SPD_NUM_BANKS_PER_SDRAM); - die_on_spd_error(value); + value = + spd_read_byte(dimm_socket_address, + SPD_NUM_BANKS_PER_SDRAM); + die_on_spd_error(value);
value = log2(value); - sz.side1 += value; + sz.side1 += value; if (sz.side2 > 0) - sz.side2 += value; + sz.side2 += value; }
return sz; }
+#ifdef VALIDATE_DIMM_COMPATIBILITY //---------------------------------------------------------------------------------- -// Function: are_spd_values_equal -// Parameters: spd_byte_number - -// dimmN_address - SMBus addresses of DIMM sockets to interrogate -// Return Value: 1 if both DIMM sockets report the same value for the specified -// SPD parameter; 0 if the values differed or an error occurred. -// Description: Determine whether two DIMMs have the same value for a SPD parameter. -// -static uint8_t are_spd_values_equal(uint8_t spd_byte_number, uint16_t dimm0_address, - uint16_t dimm1_address) +// Function: are_spd_values_equal +// Parameters: spd_byte_number - +// dimmN_address - SMBus addresses of DIMM sockets to interrogate +// Return Value: 1 if both DIMM sockets report the same value for the specified +// SPD parameter; 0 if the values differed or an error occurred. +// Description: Determine whether two DIMMs have the same value for a SPD parameter. +// +static uint8_t are_spd_values_equal(uint8_t spd_byte_number, + uint16_t dimm0_address, + uint16_t dimm1_address) { uint8_t bEqual = 0;
int dimm0_value = spd_read_byte(dimm0_address, spd_byte_number); int dimm1_value = spd_read_byte(dimm1_address, spd_byte_number);
- if ((dimm0_value >= 0) && (dimm1_value >= 0) && (dimm0_value == dimm1_value)) + if ((dimm0_value >= 0) && (dimm1_value >= 0) + && (dimm0_value == dimm1_value)) bEqual = 1;
return bEqual; } +#endif
//---------------------------------------------------------------------------------- -// Function: spd_get_supported_dimms -// Parameters: ctrl - PCI addresses of memory controller functions, and -// SMBus addresses of DIMM slots on the mainboard -// Return Value: uint8_t - a bitmask indicating which of the possible sockets -// for each channel was found to contain a compatible DIMM. -// Bit 0 corresponds to the closest socket for channel 0, -// Bit 1 to the next socket for channel 0, -// ... -// Bit MAX_DIMM_SOCKETS_PER_CHANNEL-1 to the last socket for channel 0, -// Bit MAX_DIMM_SOCKETS_PER_CHANNEL is the closest socket for channel 1, -// ... -// Bit 2*MAX_DIMM_SOCKETS_PER_CHANNEL-1 is the last socket for channel 1 -// Description: Scan for compatible DIMMs. -// The code in this module only supports dual-channel operation, -// so we test that compatible DIMMs are paired. +// Function: spd_get_supported_dimms +// Parameters: ctrl - PCI addresses of memory controller functions, and +// SMBus addresses of DIMM slots on the mainboard +// Return Value: uint8_t - a bitmask indicating which of the possible sockets +// for each channel was found to contain a compatible DIMM. +// Bit 0 corresponds to the closest socket for channel 0, +// Bit 1 to the next socket for channel 0, +// ... +// Bit MAX_DIMM_SOCKETS_PER_CHANNEL-1 to the last socket for channel 0, +// Bit MAX_DIMM_SOCKETS_PER_CHANNEL is the closest socket for channel 1, +// ... +// Bit 2*MAX_DIMM_SOCKETS_PER_CHANNEL-1 is the last socket for channel 1 +// Description: Scan for compatible DIMMs. +// The code in this module only supports dual-channel operation, +// so we test that compatible DIMMs are paired. // -static uint8_t spd_get_supported_dimms(const struct mem_controller *ctrl) +static uint8_t spd_get_supported_dimms(const struct mem_controller *ctrl) { int i; uint8_t dimm_mask = 0; @@ -686,54 +705,60 @@ // Then see if the corresponding channel 1 DIMM has the same parameters, // since we only support dual-channel.
- for (i = 0; i < MAX_DIMM_SOCKETS_PER_CHANNEL; i++) { + for (i = 0; i < MAX_DIMM_SOCKETS_PER_CHANNEL; i++) {
- uint16_t channel0_dimm = ctrl->channel0[i]; + uint16_t channel0_dimm = ctrl->channel0[i]; uint16_t channel1_dimm = ctrl->channel1[i]; uint8_t bDualChannel = 1; - struct dimm_size page_size; - struct dimm_size sdram_width; +#ifdef VALIDATE_DIMM_COMPATIBILITY + struct dimm_size page_size; + struct dimm_size sdram_width; +#endif int spd_value; - int j;
if (channel0_dimm == 0) - continue; // No such socket on this mainboard + continue; // No such socket on this mainboard
- if (spd_read_byte(channel0_dimm, SPD_MEMORY_TYPE) != SPD_MEMORY_TYPE_SDRAM_DDR) + if (spd_read_byte(channel0_dimm, SPD_MEMORY_TYPE) != + SPD_MEMORY_TYPE_SDRAM_DDR) continue;
#ifdef VALIDATE_DIMM_COMPATIBILITY - if (spd_read_byte(channel0_dimm, SPD_MODULE_VOLTAGE) != SPD_VOLTAGE_SSTL2) - continue; // Unsupported voltage + if (spd_read_byte(channel0_dimm, SPD_MODULE_VOLTAGE) != + SPD_VOLTAGE_SSTL2) + continue; // Unsupported voltage
// E7501 does not support unregistered DIMMs - spd_value = spd_read_byte(channel0_dimm, SPD_MODULE_ATTRIBUTES); + spd_value = + spd_read_byte(channel0_dimm, SPD_MODULE_ATTRIBUTES); if (!(spd_value & MODULE_REGISTERED) || (spd_value < 0)) continue; - - // Must support burst = 4 for dual-channel operation on E7501 + + // Must support burst = 4 for dual-channel operation on E7501 // NOTE: for single-channel, burst = 8 is required - spd_value = spd_read_byte(channel0_dimm, SPD_SUPPORTED_BURST_LENGTHS); + spd_value = + spd_read_byte(channel0_dimm, + SPD_SUPPORTED_BURST_LENGTHS); if (!(spd_value & SPD_BURST_LENGTH_4) || (spd_value < 0)) continue;
- page_size = sdram_spd_get_page_size(channel0_dimm); + page_size = sdram_spd_get_page_size(channel0_dimm); sdram_width = sdram_spd_get_width(channel0_dimm);
// Validate DIMM page size // The E7501 only supports page sizes of 4, 8, 16, or 32 KB per channel // NOTE: 4 KB = 32 Kb = 2^15 - // 32 KB = 262 Kb = 2^18 + // 32 KB = 262 Kb = 2^18
if ((page_size.side1 < 15) || (page_size.side1 > 18)) continue;
// If DIMM is double-sided, verify side2 page size - if (page_size.side2 != 0) { - if ((page_size.side2 < 15) || (page_size.side2 > 18)) + if (page_size.side2 != 0) { + if ((page_size.side2 < 15) + || (page_size.side2 > 18)) continue; } - // Validate SDRAM width // The E7501 only supports x4 and x8 devices
@@ -741,31 +766,37 @@ continue;
// If DIMM is double-sided, verify side2 width - if (sdram_width.side2 != 0) { - if ((sdram_width.side2 != 4) && (sdram_width.side2 != 8)) + if (sdram_width.side2 != 0) { + if ((sdram_width.side2 != 4) + && (sdram_width.side2 != 8)) continue; } -#endif +#endif // Channel 0 DIMM looks compatible. // Now see if it is paired with the proper DIMM on channel 1.
- ASSERT(channel1_dimm != 0); // No such socket on this mainboard?? + ASSERT(channel1_dimm != 0); // No such socket on this mainboard??
// NOTE: unpopulated DIMMs cause read to fail - spd_value = spd_read_byte(channel1_dimm, SPD_MODULE_ATTRIBUTES); + spd_value = + spd_read_byte(channel1_dimm, SPD_MODULE_ATTRIBUTES); if (!(spd_value & MODULE_REGISTERED) || (spd_value < 0)) { - + print_debug("Skipping un-matched DIMMs - only dual-channel operation supported\n"); continue; } - #ifdef VALIDATE_DIMM_COMPATIBILITY - spd_value = spd_read_byte(channel1_dimm, SPD_SUPPORTED_BURST_LENGTHS); + spd_value = + spd_read_byte(channel1_dimm, + SPD_SUPPORTED_BURST_LENGTHS); if (!(spd_value & SPD_BURST_LENGTH_4) || (spd_value < 0)) continue;
- for (j=0; j<sizeof(dual_channel_parameters); ++j) { - if (!are_spd_values_equal(dual_channel_parameters[j], channel0_dimm, channel1_dimm)) { + int j; + for (j = 0; j < sizeof(dual_channel_parameters); ++j) { + if (!are_spd_values_equal + (dual_channel_parameters[j], channel0_dimm, + channel1_dimm)) {
bDualChannel = 0; break; @@ -777,22 +808,21 @@ #ifdef ROMCC_IF_BUG_FIXED if (bDualChannel) { // Made it through all the checks, this DIMM pair is usable - dimm_mask |= ((1<<i) | (1<<(MAX_DIMM_SOCKETS_PER_CHANNEL + i))); - } - else + dimm_mask |= ((1 << i) | (1 << (MAX_DIMM_SOCKETS_PER_CHANNEL + i))); + } else print_debug("Skipping un-matched DIMMs - only dual-channel operation supported\n"); #else switch (bDualChannel) { case 0: print_debug("Skipping un-matched DIMMs - only dual-channel operation supported\n"); break; - + default: // Made it through all the checks, this DIMM pair is usable - dimm_mask |= (1<<i) | (1<<(MAX_DIMM_SOCKETS_PER_CHANNEL + i)); + dimm_mask |= (1 << i) | (1 << (MAX_DIMM_SOCKETS_PER_CHANNEL + i)); break; } -#endif +#endif }
return dimm_mask; @@ -803,32 +833,32 @@ /**********************************************************************************/
//---------------------------------------------------------------------------------- -// Function: do_ram_command -// Parameters: -// command - specifies the command to be sent to the DIMMs: -// RAM_COMMAND_NOP - No Operation -// RAM_COMMAND_PRECHARGE - Precharge all banks -// RAM_COMMAND_MRS - Load Mode Register -// RAM_COMMAND_EMRS - Load Extended Mode Register -// RAM_COMMAND_CBR - Auto Refresh ("CAS-before-RAS") -// RAM_COMMAND_NORMAL - Normal operation -// jedec_mode_bits - for mode register set & extended mode register set -// commands, bits 0-12 contain the register value in JEDEC format. -// Return Value: None -// Description: Send the specified command to all DIMMs. +// Function: do_ram_command +// Parameters: +// command - specifies the command to be sent to the DIMMs: +// RAM_COMMAND_NOP - No Operation +// RAM_COMMAND_PRECHARGE - Precharge all banks +// RAM_COMMAND_MRS - Load Mode Register +// RAM_COMMAND_EMRS - Load Extended Mode Register +// RAM_COMMAND_CBR - Auto Refresh ("CAS-before-RAS") +// RAM_COMMAND_NORMAL - Normal operation +// jedec_mode_bits - for mode register set & extended mode register set +// commands, bits 0-12 contain the register value in JEDEC format. +// Return Value: None +// Description: Send the specified command to all DIMMs. // -static void do_ram_command(uint8_t command, uint16_t jedec_mode_bits) +static void do_ram_command(uint8_t command, uint16_t jedec_mode_bits) { - int i; + int i; uint32_t dram_controller_mode; uint8_t dimm_start_64M_multiple = 0; uint16_t e7501_mode_bits = jedec_mode_bits;
// Configure the RAM command - dram_controller_mode = pci_read_config32(PCI_DEV(0, 0, 0), DRC); - dram_controller_mode &= 0xFFFFFF8F; - dram_controller_mode |= command; - pci_write_config32(PCI_DEV(0, 0, 0), DRC, dram_controller_mode); + dram_controller_mode = pci_read_config32(PCI_DEV(0, 0, 0), DRC); + dram_controller_mode &= 0xFFFFFF8F; + dram_controller_mode |= command; + pci_write_config32(PCI_DEV(0, 0, 0), DRC, dram_controller_mode);
// RAM_COMMAND_NORMAL is an exception. // It affects only the memory controller and does not need to be "sent" to the DIMMs. @@ -837,7 +867,7 @@
// Send the command to all DIMMs by accessing a memory location within each // NOTE: for mode select commands, some of the location address bits - // are part of the command + // are part of the command
// Map JEDEC mode bits to E7501 if (command == RAM_COMMAND_MRS) { @@ -846,8 +876,8 @@
ASSERT(!(jedec_mode_bits & 0x0401));
- e7501_mode_bits = ((jedec_mode_bits & 0x1800) << (15-12)) | // JEDEC bits 11-12 move to bits 14-15 - ((jedec_mode_bits & 0x03FE) << (13-9)); // JEDEC bits 1-9 move to bits 5-13 + e7501_mode_bits = ((jedec_mode_bits & 0x1800) << (15 - 12)) | // JEDEC bits 11-12 move to bits 14-15 + ((jedec_mode_bits & 0x03FE) << (13 - 9)); // JEDEC bits 1-9 move to bits 5-13
} else if (command == RAM_COMMAND_EMRS) { // Host address lines [15:3] map to DIMM address lines [12:0] @@ -855,12 +885,12 @@ } else ASSERT(jedec_mode_bits == 0);
- dimm_start_64M_multiple = 0;
for (i = 0; i < (MAX_NUM_CHANNELS * MAX_DIMM_SOCKETS_PER_CHANNEL); ++i) {
- uint8_t dimm_end_64M_multiple = pci_read_config8(PCI_DEV(0, 0, 0), DRB_ROW_0 + i); + uint8_t dimm_end_64M_multiple = + pci_read_config8(PCI_DEV(0, 0, 0), DRB_ROW_0 + i); if (dimm_end_64M_multiple > dimm_start_64M_multiple) {
// This code assumes DRAM row boundaries are all set below 4 GB @@ -869,34 +899,38 @@
// NOTE: 2^26 == 64 MB
- uint32_t dimm_start_address = dimm_start_64M_multiple << 26; + uint32_t dimm_start_address = + dimm_start_64M_multiple << 26;
RAM_DEBUG_MESSAGE(" Sending RAM command to 0x"); RAM_DEBUG_HEX32(dimm_start_address + e7501_mode_bits); RAM_DEBUG_MESSAGE("\n"); + read32(dimm_start_address + e7501_mode_bits);
// Set the start of the next DIMM - dimm_start_64M_multiple = dimm_end_64M_multiple; + dimm_start_64M_multiple = + dimm_end_64M_multiple; } } } }
//---------------------------------------------------------------------------------- -// Function: set_ram_mode -// Parameters: jedec_mode_bits - for mode register set & extended mode register set -// commands, bits 0-12 contain the register value in JEDEC format. -// Return Value: None -// Description: Set the mode register of all DIMMs. The proper CAS# latency -// setting is added to the mode bits specified by the caller. +// Function: set_ram_mode +// Parameters: jedec_mode_bits - for mode register set & extended mode register set +// commands, bits 0-12 contain the register value in JEDEC format. +// Return Value: None +// Description: Set the mode register of all DIMMs. The proper CAS# latency +// setting is added to the mode bits specified by the caller. // static void set_ram_mode(uint16_t jedec_mode_bits) { ASSERT(!(jedec_mode_bits & SDRAM_CAS_MASK));
- uint32_t dram_cas_latency = pci_read_config32(PCI_DEV(0, 0, 0), DRT) & DRT_CAS_MASK; - + uint32_t dram_cas_latency = + pci_read_config32(PCI_DEV(0, 0, 0), DRT) & DRT_CAS_MASK; + switch (dram_cas_latency) { case DRT_CAS_2_5: jedec_mode_bits |= SDRAM_CAS_2_5; @@ -915,25 +949,22 @@ }
/*^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^*/ -/* SDRAM CONFIGURATION FUNCTIONS */ +/* SDRAM CONFIGURATION FUNCTIONS */ /**********************************************************************************/
//---------------------------------------------------------------------------------- -// Function: configure_dimm_row_boundaries -// Parameters: -// dimm_log2_num_bits - log2(number of bits) for each side of the DIMM -// total_dram_64M_multiple - total DRAM in the system (as a -// multiple of 64 MB) for DIMMs < dimm_index -// dimm_index - which DIMM pair is being processed -// (0..MAX_DIMM_SOCKETS_PER_CHANNEL) -// Return Value: New multiple of 64 MB total DRAM in the system -// Description: Configure the E7501's DRAM Row Boundary registers for the memory -// present in the specified DIMM. -// -static uint8_t configure_dimm_row_boundaries( - struct dimm_size dimm_log2_num_bits, - uint8_t total_dram_64M_multiple, - unsigned dimm_index) +// Function: configure_dimm_row_boundaries +// Parameters: +// dimm_log2_num_bits - log2(number of bits) for each side of the DIMM +// total_dram_64M_multiple - total DRAM in the system (as a +// multiple of 64 MB) for DIMMs < dimm_index +// dimm_index - which DIMM pair is being processed +// (0..MAX_DIMM_SOCKETS_PER_CHANNEL) +// Return Value: New multiple of 64 MB total DRAM in the system +// Description: Configure the E7501's DRAM Row Boundary registers for the memory +// present in the specified DIMM. +// +static uint8_t configure_dimm_row_boundaries(struct dimm_size dimm_log2_num_bits, uint8_t total_dram_64M_multiple, unsigned dimm_index) { int i;
@@ -941,7 +972,8 @@
// DIMM sides must be at least 32 MB ASSERT(dimm_log2_num_bits.side1 >= 28); - ASSERT((dimm_log2_num_bits.side2 == 0) || (dimm_log2_num_bits.side2 >= 28)); + ASSERT((dimm_log2_num_bits.side2 == 0) + || (dimm_log2_num_bits.side2 >= 28));
// In dual-channel mode, we are called only once for each pair of DIMMs. // Each time we process twice the capacity of a single DIMM. @@ -951,7 +983,7 @@ dimm_log2_num_bits.side1++; if (dimm_log2_num_bits.side2 > 0) dimm_log2_num_bits.side2++; - + // Add the capacity of side 1 this DIMM pair (as a multiple of 64 MB) // to the total capacity of the system // NOTE: 64 MB == 512 Mb, and log2(512 Mb) == 29 @@ -959,76 +991,82 @@ total_dram_64M_multiple += (1 << (dimm_log2_num_bits.side1 - 29));
// Configure the boundary address for the row on side 1 - pci_write_config8(PCI_DEV(0, 0, 0), DRB_ROW_0+(dimm_index<<1), total_dram_64M_multiple); + pci_write_config8(PCI_DEV(0, 0, 0), DRB_ROW_0 + (dimm_index << 1), + total_dram_64M_multiple);
// If the DIMMs are double-sided, add the capacity of side 2 this DIMM pair // (as a multiple of 64 MB) to the total capacity of the system - if (dimm_log2_num_bits.side2 >= 29) - total_dram_64M_multiple += (1 << (dimm_log2_num_bits.side2 - 29)); - + if (dimm_log2_num_bits.side2 >= 29) + total_dram_64M_multiple += + (1 << (dimm_log2_num_bits.side2 - 29)); + // Configure the boundary address for the row (if any) on side 2 - pci_write_config8(PCI_DEV(0, 0, 0), DRB_ROW_1+(dimm_index<<1), total_dram_64M_multiple); + pci_write_config8(PCI_DEV(0, 0, 0), DRB_ROW_1 + (dimm_index << 1), + total_dram_64M_multiple);
// Update boundaries for rows subsequent to these. // These settings will be overridden by a subsequent call if a populated physical slot exists - - for(i=dimm_index+1; i<MAX_DIMM_SOCKETS_PER_CHANNEL; i++) { - pci_write_config8(PCI_DEV(0, 0, 0), DRB_ROW_0+(i<<1), total_dram_64M_multiple); - pci_write_config8(PCI_DEV(0, 0, 0), DRB_ROW_1+(i<<1), total_dram_64M_multiple); + + for (i = dimm_index + 1; i < MAX_DIMM_SOCKETS_PER_CHANNEL; i++) { + pci_write_config8(PCI_DEV(0, 0, 0), DRB_ROW_0 + (i << 1), + total_dram_64M_multiple); + pci_write_config8(PCI_DEV(0, 0, 0), DRB_ROW_1 + (i << 1), + total_dram_64M_multiple); } - - return total_dram_64M_multiple; + + return total_dram_64M_multiple; }
//---------------------------------------------------------------------------------- -// Function: configure_e7501_ram_addresses -// Parameters: ctrl - PCI addresses of memory controller functions, and -// SMBus addresses of DIMM slots on the mainboard -// dimm_mask - bitmask of populated DIMMs on the board - see -// spd_get_supported_dimms() -// Return Value: None -// Description: Program the E7501's DRAM row boundary addresses and its Top Of -// Low Memory (TOLM). If necessary, set up a remap window so we -// don't waste DRAM that ordinarily would lie behind addresses -// reserved for memory-mapped I/O. +// Function: configure_e7501_ram_addresses +// Parameters: ctrl - PCI addresses of memory controller functions, and +// SMBus addresses of DIMM slots on the mainboard +// dimm_mask - bitmask of populated DIMMs on the board - see +// spd_get_supported_dimms() +// Return Value: None +// Description: Program the E7501's DRAM row boundary addresses and its Top Of +// Low Memory (TOLM). If necessary, set up a remap window so we +// don't waste DRAM that ordinarily would lie behind addresses +// reserved for memory-mapped I/O. // -static void configure_e7501_ram_addresses(const struct mem_controller *ctrl, - uint8_t dimm_mask) +static void configure_e7501_ram_addresses(const struct mem_controller + *ctrl, uint8_t dimm_mask) { int i; - uint8_t total_dram_64M_multiple = 0; + uint8_t total_dram_64M_multiple = 0;
// Configure the E7501's DRAM row boundaries // Start by zeroing out the temporary initial configuration pci_write_config32(PCI_DEV(0, 0, 0), DRB_ROW_0, 0); pci_write_config32(PCI_DEV(0, 0, 0), DRB_ROW_4, 0);
- for(i = 0; i < MAX_DIMM_SOCKETS_PER_CHANNEL; i++) { + for (i = 0; i < MAX_DIMM_SOCKETS_PER_CHANNEL; i++) {
- uint16_t dimm_socket_address = ctrl->channel0[i]; + uint16_t dimm_socket_address = ctrl->channel0[i]; struct dimm_size sz;
- if (!(dimm_mask & (1 << i))) - continue; // This DIMM not present + if (!(dimm_mask & (1 << i))) + continue; // This DIMM not present
- sz = spd_get_dimm_size(dimm_socket_address); + sz = spd_get_dimm_size(dimm_socket_address);
- RAM_DEBUG_MESSAGE("dimm size ="); - RAM_DEBUG_HEX32(sz.side1); - RAM_DEBUG_MESSAGE(" "); - RAM_DEBUG_HEX32(sz.side2); - RAM_DEBUG_MESSAGE("\n"); + RAM_DEBUG_MESSAGE("dimm size ="); + RAM_DEBUG_HEX32(sz.side1); + RAM_DEBUG_MESSAGE(" "); + RAM_DEBUG_HEX32(sz.side2); + RAM_DEBUG_MESSAGE("\n");
if (sz.side1 == 0) die("Bad SPD value\n");
- total_dram_64M_multiple = configure_dimm_row_boundaries(sz, total_dram_64M_multiple, i); + total_dram_64M_multiple = + configure_dimm_row_boundaries(sz, total_dram_64M_multiple, i); }
// Configure the Top Of Low Memory (TOLM) in the E7501 // This address must be a multiple of 128 MB that is less than 4 GB. // NOTE: 16-bit wide TOLM register stores only the highest 5 bits of a 32-bit address - // in the highest 5 bits. + // in the highest 5 bits.
// We set TOLM to the smaller of 0xC0000000 (3 GB) or the total DRAM in the system. // This reserves addresses from 0xC0000000 - 0xFFFFFFFF for non-DRAM purposes @@ -1040,30 +1078,33 @@
// NOTE: 0xC0000000 / (64 MB) == 0x30
- if (total_dram_64M_multiple <= 0x30) { + if (total_dram_64M_multiple <= 0x30) {
// <= 3 GB total RAM
/* I should really adjust all of this in C after I have resources - * to all of the pci devices. - */ + * to all of the pci devices. + */
// Round up to 128MB granularity // SJM: Is "missing" 64 MB of memory a potential issue? Should this round down?
- uint8_t total_dram_128M_multiple = (total_dram_64M_multiple + 1) >> 1; + uint8_t total_dram_128M_multiple = + (total_dram_64M_multiple + 1) >> 1;
// Convert to high 16 bits of address - uint16_t top_of_low_memory = total_dram_128M_multiple << 11; + uint16_t top_of_low_memory = + total_dram_128M_multiple << 11;
- pci_write_config16(PCI_DEV(0, 0, 0), TOLM, top_of_low_memory); + pci_write_config16(PCI_DEV(0, 0, 0), TOLM, + top_of_low_memory);
} else {
// > 3 GB total RAM
// Set defaults for > 4 GB DRAM, i.e. remap a 1 GB (= 0x10 * 64 MB) range of memory - uint16_t remap_base = total_dram_64M_multiple; // A[25:0] == 0 + uint16_t remap_base = total_dram_64M_multiple; // A[25:0] == 0 uint16_t remap_limit = total_dram_64M_multiple + 0x10 - 1; // A[25:0] == 0xF
// Put TOLM at 3 GB @@ -1073,25 +1114,28 @@ // Define a remap window to make the RAM that would appear from 3 GB - 4 GB // visible just beyond 4 GB or the end of physical memory, whichever is larger // NOTE: 16-bit wide REMAP registers store only the highest 10 bits of a 36-bit address, - // (i.e. a multiple of 64 MB) in the lowest 10 bits. + // (i.e. a multiple of 64 MB) in the lowest 10 bits. // NOTE: 0x100000000 / (64 MB) == 0x40
- if (total_dram_64M_multiple < 0x40) { - remap_base = 0x40; // 0x100000000 - remap_limit = 0x40 + (total_dram_64M_multiple - 0x30) - 1; + if (total_dram_64M_multiple < 0x40) { + remap_base = 0x40; // 0x100000000 + remap_limit = + 0x40 + (total_dram_64M_multiple - 0x30) - 1; }
- pci_write_config16(PCI_DEV(0, 0, 0), REMAPBASE, remap_base); - pci_write_config16(PCI_DEV(0, 0, 0), REMAPLIMIT, remap_limit); + pci_write_config16(PCI_DEV(0, 0, 0), REMAPBASE, + remap_base); + pci_write_config16(PCI_DEV(0, 0, 0), REMAPLIMIT, + remap_limit); } }
//---------------------------------------------------------------------------------- -// Function: initialize_ecc -// Parameters: None -// Return Value: None -// Description: If we're configured to use ECC, initialize the SDRAM and -// clear the E7501's ECC error flags. +// Function: initialize_ecc +// Parameters: None +// Return Value: None +// Description: If we're configured to use ECC, initialize the SDRAM and +// clear the E7501's ECC error flags. // static void initialize_ecc(void) { @@ -1101,145 +1145,156 @@ dram_controller_mode = pci_read_config32(PCI_DEV(0, 0, 0), DRC); dram_controller_mode >>= 20; dram_controller_mode &= 3; - if (dram_controller_mode == 2) { - + if (dram_controller_mode == 2) { + uint8_t byte;
RAM_DEBUG_MESSAGE("Initializing ECC state...\n"); - /* Initialize ECC bits , use ECC zero mode (new to 7501)*/ + /* Initialize ECC bits , use ECC zero mode (new to 7501) */ pci_write_config8(PCI_DEV(0, 0, 0), MCHCFGNS, 0x06); pci_write_config8(PCI_DEV(0, 0, 0), MCHCFGNS, 0x07);
// Wait for scrub cycle to complete do { - byte = pci_read_config8(PCI_DEV(0, 0, 0), MCHCFGNS); - - } while ( (byte & 0x08 ) == 0); + byte = + pci_read_config8(PCI_DEV(0, 0, 0), MCHCFGNS); + } while ((byte & 0x08) == 0);
pci_write_config8(PCI_DEV(0, 0, 0), MCHCFGNS, byte & 0xfc); - RAM_DEBUG_MESSAGE("ECC state initialized.\n"); + RAM_DEBUG_MESSAGE("ECC state initialized.\n");
/* Clear the ECC error bits */ pci_write_config8(PCI_DEV(0, 0, 1), DRAM_FERR, 0x03); pci_write_config8(PCI_DEV(0, 0, 1), DRAM_NERR, 0x03);
// Clear DRAM Interface error bits (write-one-clear) - pci_write_config32(PCI_DEV(0, 0, 1), FERR_GLOBAL, 1<<18); - pci_write_config32(PCI_DEV(0, 0, 1), NERR_GLOBAL, 1<<18); + pci_write_config32(PCI_DEV(0, 0, 1), FERR_GLOBAL, 1 << 18); + pci_write_config32(PCI_DEV(0, 0, 1), NERR_GLOBAL, 1 << 18);
// Start normal ECC scrub pci_write_config8(PCI_DEV(0, 0, 0), MCHCFGNS, 5); } - + }
//---------------------------------------------------------------------------------- -// Function: configure_e7501_dram_timing -// Parameters: ctrl - PCI addresses of memory controller functions, and -// SMBus addresses of DIMM slots on the mainboard -// dimm_mask - bitmask of populated DIMMs on the board - see -// spd_get_supported_dimms() -// Return Value: None -// Description: Program the DRAM Timing register of the E7501 (except for CAS# -// latency, which is assumed to have been programmed already), based -// on the parameters of the various installed DIMMs. +// Function: configure_e7501_dram_timing +// Parameters: ctrl - PCI addresses of memory controller functions, and +// SMBus addresses of DIMM slots on the mainboard +// dimm_mask - bitmask of populated DIMMs on the board - see +// spd_get_supported_dimms() +// Return Value: None +// Description: Program the DRAM Timing register of the E7501 (except for CAS# +// latency, which is assumed to have been programmed already), based +// on the parameters of the various installed DIMMs. // -static void configure_e7501_dram_timing(const struct mem_controller *ctrl, uint8_t dimm_mask) +static void configure_e7501_dram_timing(const struct mem_controller *ctrl, + uint8_t dimm_mask) { int i; - uint32_t dram_timing; - int value; + uint32_t dram_timing; + int value; uint8_t slowest_row_precharge = 0; uint8_t slowest_ras_cas_delay = 0; uint8_t slowest_active_to_precharge_delay = 0; - uint32_t current_cas_latency = pci_read_config32(PCI_DEV(0, 0, 0), DRT) & DRT_CAS_MASK; + uint32_t current_cas_latency = + pci_read_config32(PCI_DEV(0, 0, 0), DRT) & DRT_CAS_MASK;
// CAS# latency must be programmed beforehand - ASSERT((current_cas_latency == DRT_CAS_2_0) || (current_cas_latency == DRT_CAS_2_5)); + ASSERT((current_cas_latency == DRT_CAS_2_0) + || (current_cas_latency == DRT_CAS_2_5));
// Each timing parameter is determined by the slowest DIMM
for (i = 0; i < MAX_DIMM_SOCKETS; i++) { + uint16_t dimm_socket_address;
- uint16_t dimm_socket_address; - if (!(dimm_mask & (1 << i))) - continue; // This DIMM not present + continue; // This DIMM not present
if (i < MAX_DIMM_SOCKETS_PER_CHANNEL) dimm_socket_address = ctrl->channel0[i]; else - dimm_socket_address = ctrl->channel1[i - MAX_DIMM_SOCKETS_PER_CHANNEL]; + dimm_socket_address = + ctrl->channel1[i - MAX_DIMM_SOCKETS_PER_CHANNEL];
- value = spd_read_byte(dimm_socket_address, SPD_MIN_ROW_PRECHARGE_TIME); - if (value < 0) goto hw_err; + value = + spd_read_byte(dimm_socket_address, + SPD_MIN_ROW_PRECHARGE_TIME); + if (value < 0) + goto hw_err; if (value > slowest_row_precharge) slowest_row_precharge = value;
- value = spd_read_byte(dimm_socket_address, SPD_MIN_RAS_TO_CAS_DELAY); - if(value < 0 ) goto hw_err; + value = + spd_read_byte(dimm_socket_address, + SPD_MIN_RAS_TO_CAS_DELAY); + if (value < 0) + goto hw_err; if (value > slowest_ras_cas_delay) slowest_ras_cas_delay = value;
- value = spd_read_byte(dimm_socket_address, SPD_MIN_ACTIVE_TO_PRECHARGE_DELAY); - if(value < 0 ) goto hw_err; + value = + spd_read_byte(dimm_socket_address, + SPD_MIN_ACTIVE_TO_PRECHARGE_DELAY); + if (value < 0) + goto hw_err; if (value > slowest_active_to_precharge_delay) slowest_active_to_precharge_delay = value; }
// NOTE for timing parameters: - // At 133 MHz, 1 clock == 7.52 ns + // At 133 MHz, 1 clock == 7.52 ns
- /* Read the initial state */ - dram_timing = pci_read_config32(PCI_DEV(0, 0, 0), DRT); + /* Read the initial state */ + dram_timing = pci_read_config32(PCI_DEV(0, 0, 0), DRT);
/* Trp */
// E7501 supports only 2 or 3 clocks for tRP - if (slowest_row_precharge > ((22<<2) | (2<<0))) - die("unsupported DIMM tRP"); // > 22.5 ns: 4 or more clocks - else if (slowest_row_precharge > (15<<2)) - dram_timing &= ~(1<<0); // > 15.0 ns: 3 clocks + if (slowest_row_precharge > ((22 << 2) | (2 << 0))) + die("unsupported DIMM tRP"); // > 22.5 ns: 4 or more clocks + else if (slowest_row_precharge > (15 << 2)) + dram_timing &= ~(1 << 0); // > 15.0 ns: 3 clocks else - dram_timing |= (1<<0); // <= 15.0 ns: 2 clocks + dram_timing |= (1 << 0); // <= 15.0 ns: 2 clocks
/* Trcd */
// E7501 supports only 2 or 3 clocks for tRCD // Use the same value for both read & write - dram_timing &= ~((1<<3)|(3<<1)); - if (slowest_ras_cas_delay > ((22<<2) | (2<<0))) - die("unsupported DIMM tRCD"); // > 22.5 ns: 4 or more clocks - else if (slowest_ras_cas_delay > (15<<2)) - dram_timing |= (2<<1); // > 15.0 ns: 3 clocks + dram_timing &= ~((1 << 3) | (3 << 1)); + if (slowest_ras_cas_delay > ((22 << 2) | (2 << 0))) + die("unsupported DIMM tRCD"); // > 22.5 ns: 4 or more clocks + else if (slowest_ras_cas_delay > (15 << 2)) + dram_timing |= (2 << 1); // > 15.0 ns: 3 clocks else - dram_timing |= ((1<<3) | (3<<1)); // <= 15.0 ns: 2 clocks + dram_timing |= ((1 << 3) | (3 << 1)); // <= 15.0 ns: 2 clocks
/* Tras */
// E7501 supports only 5, 6, or 7 clocks for tRAS // 5 clocks ~= 37.6 ns, 6 clocks ~= 45.1 ns, 7 clocks ~= 52.6 ns - dram_timing &= ~(3<<9); + dram_timing &= ~(3 << 9);
if (slowest_active_to_precharge_delay > 52) - die("unsupported DIMM tRAS"); // > 52 ns: 8 or more clocks + die("unsupported DIMM tRAS"); // > 52 ns: 8 or more clocks else if (slowest_active_to_precharge_delay > 45) - dram_timing |= (0<<9); // 46-52 ns: 7 clocks + dram_timing |= (0 << 9); // 46-52 ns: 7 clocks else if (slowest_active_to_precharge_delay > 37) - dram_timing |= (1<<9); // 38-45 ns: 6 clocks + dram_timing |= (1 << 9); // 38-45 ns: 6 clocks else - dram_timing |= (2<<9); // < 38 ns: 5 clocks - + dram_timing |= (2 << 9); // < 38 ns: 5 clocks
- /* Trd */ + /* Trd */
/* Set to a 7 clock read delay. This is for 133Mhz - * with a CAS latency of 2.5 if 2.0 a 6 clock - * delay is good */ + * with a CAS latency of 2.5 if 2.0 a 6 clock + * delay is good */
- dram_timing &= ~(7<<24); // 7 clocks + dram_timing &= ~(7 << 24); // 7 clocks if (current_cas_latency == DRT_CAS_2_0) - dram_timing |= (1<<24); // 6 clocks + dram_timing |= (1 << 24); // 6 clocks
/* * Back to Back Read-Write Turn Around @@ -1247,29 +1302,30 @@ /* Set to a 5 clock back to back read to write turn around. * 4 is a good delay if the CAS latency is 2.0 */
- dram_timing &= ~(1<<28); // 5 clocks + dram_timing &= ~(1 << 28); // 5 clocks if (current_cas_latency == DRT_CAS_2_0) - dram_timing |= (1<<28); // 4 clocks + dram_timing |= (1 << 28); // 4 clocks
pci_write_config32(PCI_DEV(0, 0, 0), DRT, dram_timing);
return;
-hw_err: + hw_err: die(SPD_ERROR); }
//---------------------------------------------------------------------------------- -// Function: configure_e7501_cas_latency -// Parameters: ctrl - PCI addresses of memory controller functions, and -// SMBus addresses of DIMM slots on the mainboard -// dimm_mask - bitmask of populated DIMMs on the board - see -// spd_get_supported_dimms() -// Return Value: None -// Description: Determine the shortest CAS# latency that the E7501 and all DIMMs -// have in common, and program the E7501 to use it. +// Function: configure_e7501_cas_latency +// Parameters: ctrl - PCI addresses of memory controller functions, and +// SMBus addresses of DIMM slots on the mainboard +// dimm_mask - bitmask of populated DIMMs on the board - see +// spd_get_supported_dimms() +// Return Value: None +// Description: Determine the shortest CAS# latency that the E7501 and all DIMMs +// have in common, and program the E7501 to use it. // -static void configure_e7501_cas_latency(const struct mem_controller *ctrl, uint8_t dimm_mask) +static void configure_e7501_cas_latency(const struct mem_controller *ctrl, + uint8_t dimm_mask) { int i; int value; @@ -1279,32 +1335,40 @@
// CAS# latency bitmasks in SPD_ACCEPTABLE_CAS_LATENCIES format // NOTE: E7501 supports only 2.0 and 2.5 - uint32_t system_compatible_cas_latencies = SPD_CAS_LATENCY_2_0 | SPD_CAS_LATENCY_2_5; + uint32_t system_compatible_cas_latencies = + SPD_CAS_LATENCY_2_0 | SPD_CAS_LATENCY_2_5; uint32_t current_cas_latency; uint32_t dimm_compatible_cas_latencies; - + for (i = 0; i < MAX_DIMM_SOCKETS; i++) {
- uint16_t dimm_socket_address; + uint16_t dimm_socket_address;
if (!(dimm_mask & (1 << i))) - continue; // This DIMM not usable + continue; // This DIMM not usable
if (i < MAX_DIMM_SOCKETS_PER_CHANNEL) dimm_socket_address = ctrl->channel0[i]; else - dimm_socket_address = ctrl->channel1[i - MAX_DIMM_SOCKETS_PER_CHANNEL]; + dimm_socket_address = + ctrl->channel1[i - MAX_DIMM_SOCKETS_PER_CHANNEL];
- value = spd_read_byte(dimm_socket_address, SPD_ACCEPTABLE_CAS_LATENCIES); - if (value < 0) goto hw_err; + value = + spd_read_byte(dimm_socket_address, + SPD_ACCEPTABLE_CAS_LATENCIES); + if (value < 0) + goto hw_err;
- dimm_compatible_cas_latencies = value & 0x7f; // Start with all supported by DIMM - current_cas_latency = 1 << log2(dimm_compatible_cas_latencies); // Max supported by DIMM + dimm_compatible_cas_latencies = value & 0x7f; // Start with all supported by DIMM + current_cas_latency = 1 << log2(dimm_compatible_cas_latencies); // Max supported by DIMM
// Can we support the highest CAS# latency?
- value = spd_read_byte(dimm_socket_address, SPD_MIN_CYCLE_TIME_AT_CAS_MAX); - if (value < 0) goto hw_err; + value = + spd_read_byte(dimm_socket_address, + SPD_MIN_CYCLE_TIME_AT_CAS_MAX); + if (value < 0) + goto hw_err;
// NOTE: At 133 MHz, 1 clock == 7.52 ns if (value > 0x75) { @@ -1312,30 +1376,36 @@ // Remove it from the bitmask of those supported by the DIMM that are compatible dimm_compatible_cas_latencies &= ~current_cas_latency; } - // Can we support the next-highest CAS# latency (max - 0.5)?
current_cas_latency >>= 1; if (current_cas_latency != 0) { - value = spd_read_byte(dimm_socket_address, SPD_SDRAM_CYCLE_TIME_2ND); - if(value < 0 ) goto hw_err; - if(value > 0x75) - dimm_compatible_cas_latencies &= ~current_cas_latency; + value = + spd_read_byte(dimm_socket_address, + SPD_SDRAM_CYCLE_TIME_2ND); + if (value < 0) + goto hw_err; + if (value > 0x75) + dimm_compatible_cas_latencies &= + ~current_cas_latency; } - // Can we support the next-highest CAS# latency (max - 1.0)? current_cas_latency >>= 1; if (current_cas_latency != 0) { - value = spd_read_byte(dimm_socket_address, SPD_SDRAM_CYCLE_TIME_3RD); - if(value < 0 ) goto hw_err; - if(value > 0x75) - dimm_compatible_cas_latencies &= ~current_cas_latency; + value = + spd_read_byte(dimm_socket_address, + SPD_SDRAM_CYCLE_TIME_3RD); + if (value < 0) + goto hw_err; + if (value > 0x75) + dimm_compatible_cas_latencies &= + ~current_cas_latency; } - // Restrict the system to CAS# latencies compatible with this DIMM - system_compatible_cas_latencies &= dimm_compatible_cas_latencies; + system_compatible_cas_latencies &= + dimm_compatible_cas_latencies;
- /* go to the next DIMM */ + /* go to the next DIMM */ }
/* After all of the arduous calculation setup with the fastest @@ -1345,154 +1415,162 @@ dram_timing = pci_read_config32(PCI_DEV(0, 0, 0), DRT); dram_timing &= ~(DRT_CAS_MASK);
- maybe_dram_read_timing = pci_read_config16(PCI_DEV(0, 0, 0), MAYBE_DRDCTL); + maybe_dram_read_timing = + pci_read_config16(PCI_DEV(0, 0, 0), MAYBE_DRDCTL); maybe_dram_read_timing &= 0xF00C;
if (system_compatible_cas_latencies & SPD_CAS_LATENCY_2_0) { dram_timing |= DRT_CAS_2_0; maybe_dram_read_timing |= 0xBB1; - } - else if (system_compatible_cas_latencies & SPD_CAS_LATENCY_2_5) { + } else if (system_compatible_cas_latencies & SPD_CAS_LATENCY_2_5) {
- uint32_t dram_row_attributes = pci_read_config32(PCI_DEV(0, 0, 0), DRA); + uint32_t dram_row_attributes = + pci_read_config32(PCI_DEV(0, 0, 0), DRA);
dram_timing |= DRT_CAS_2_5;
// At CAS# 2.5, DRAM Read Timing (if that's what it its) appears to need a slightly // different value if all DIMM slots are populated
- if ((dram_row_attributes & 0xff) && (dram_row_attributes & 0xff00) && - (dram_row_attributes & 0xff0000) && (dram_row_attributes & 0xff000000)) { + if ((dram_row_attributes & 0xff) + && (dram_row_attributes & 0xff00) + && (dram_row_attributes & 0xff0000) + && (dram_row_attributes & 0xff000000)) {
// All slots populated maybe_dram_read_timing |= 0x0882; - } - else { + } else { // Some unpopulated slots maybe_dram_read_timing |= 0x0662; } - } - else + } else die("No CAS# latencies compatible with all DIMMs!!\n");
pci_write_config32(PCI_DEV(0, 0, 0), DRT, dram_timing);
/* set master DLL reset */ dword = pci_read_config32(PCI_DEV(0, 0, 0), 0x88); - dword |= (1<<26); + dword |= (1 << 26); pci_write_config32(PCI_DEV(0, 0, 0), 0x88, dword); - + dword &= 0x0c0007ff; /* patch try register 88 is undocumented tnz */ dword |= 0xd2109800;
pci_write_config32(PCI_DEV(0, 0, 0), 0x88, dword);
- - pci_write_config16(PCI_DEV(0, 0, 0), MAYBE_DRDCTL, maybe_dram_read_timing); - + pci_write_config16(PCI_DEV(0, 0, 0), MAYBE_DRDCTL, + maybe_dram_read_timing); + dword = pci_read_config32(PCI_DEV(0, 0, 0), 0x88); /* reset master DLL reset */ - dword &= ~(1<<26); + dword &= ~(1 << 26); pci_write_config32(PCI_DEV(0, 0, 0), 0x88, dword);
return;
-hw_err: + hw_err: die(SPD_ERROR); }
//---------------------------------------------------------------------------------- -// Function: configure_e7501_dram_controller_mode -// Parameters: ctrl - PCI addresses of memory controller functions, and -// SMBus addresses of DIMM slots on the mainboard -// dimm_mask - bitmask of populated DIMMs on the board - see -// spd_get_supported_dimms() -// Return Value: None -// Description: Configure the refresh interval so that we refresh no more often -// than required by the "most needy" DIMM. Also disable ECC if any -// of the DIMMs don't support it. -// -static void configure_e7501_dram_controller_mode(const struct mem_controller *ctrl, - uint8_t dimm_mask) +// Function: configure_e7501_dram_controller_mode +// Parameters: ctrl - PCI addresses of memory controller functions, and +// SMBus addresses of DIMM slots on the mainboard +// dimm_mask - bitmask of populated DIMMs on the board - see +// spd_get_supported_dimms() +// Return Value: None +// Description: Configure the refresh interval so that we refresh no more often +// than required by the "most needy" DIMM. Also disable ECC if any +// of the DIMMs don't support it. +// +static void configure_e7501_dram_controller_mode(const struct + mem_controller *ctrl, + uint8_t dimm_mask) { - int i; + int i;
// Initial settings - uint32_t controller_mode = pci_read_config32(PCI_DEV(0, 0, 0), DRC); + uint32_t controller_mode = + pci_read_config32(PCI_DEV(0, 0, 0), DRC); uint32_t system_refresh_mode = (controller_mode >> 8) & 7;
// Code below assumes that most aggressive settings are in // force when we are called, either via E7501 reset defaults // or by sdram_set_registers(): - // - ECC enabled - // - No refresh + // - ECC enabled + // - No refresh
- ASSERT((controller_mode & (3<<20)) == (2<<20)); // ECC - ASSERT(!(controller_mode & (7 << 8))); // Refresh + ASSERT((controller_mode & (3 << 20)) == (2 << 20)); // ECC + ASSERT(!(controller_mode & (7 << 8))); // Refresh
- /* Walk through _all_ dimms and find the least-common denominator for: - * - ECC support - * - refresh rates - */ + /* Walk through _all_ dimms and find the least-common denominator for: + * - ECC support + * - refresh rates + */
for (i = 0; i < MAX_DIMM_SOCKETS; i++) {
uint32_t dimm_refresh_mode; - int value; - uint16_t dimm_socket_address; + int value; + uint16_t dimm_socket_address;
if (!(dimm_mask & (1 << i))) { - continue; // This DIMM not usable - } + continue; // This DIMM not usable + }
if (i < MAX_DIMM_SOCKETS_PER_CHANNEL) dimm_socket_address = ctrl->channel0[i]; else - dimm_socket_address = ctrl->channel1[i - MAX_DIMM_SOCKETS_PER_CHANNEL]; + dimm_socket_address = + ctrl->channel1[i - + MAX_DIMM_SOCKETS_PER_CHANNEL];
// Disable ECC mode if any one of the DIMMs does not support ECC // SJM: Should we just die here? E7501 datasheet says non-ECC DIMMs aren't supported.
- value = spd_read_byte(dimm_socket_address, SPD_DIMM_CONFIG_TYPE); - die_on_spd_error(value); + value = + spd_read_byte(dimm_socket_address, + SPD_DIMM_CONFIG_TYPE); + die_on_spd_error(value); if (value != ERROR_SCHEME_ECC) { controller_mode &= ~(3 << 20); }
value = spd_read_byte(dimm_socket_address, SPD_REFRESH); die_on_spd_error(value); - value &= 0x7f; // Mask off self-refresh bit - if(value > MAX_SPD_REFRESH_RATE) { + value &= 0x7f; // Mask off self-refresh bit + if (value > MAX_SPD_REFRESH_RATE) { print_err("unsupported refresh rate\n"); continue; } - // Get the appropriate E7501 refresh mode for this DIMM dimm_refresh_mode = refresh_rate_map[value]; if (dimm_refresh_mode > 7) { print_err("unsupported refresh rate\n"); continue; } - // If this DIMM requires more frequent refresh than others, // update the system setting - if (refresh_frequency[dimm_refresh_mode] > refresh_frequency[system_refresh_mode]) + if (refresh_frequency[dimm_refresh_mode] > + refresh_frequency[system_refresh_mode]) system_refresh_mode = dimm_refresh_mode; - + #ifdef SUSPICIOUS_LOOKING_CODE // SJM NOTE: This code doesn't look right. SPD values are an order of magnitude smaller -// than the clock period of the memory controller. Also, no other northbridge -// looks at SPD_CMD_SIGNAL_INPUT_HOLD_TIME. +// than the clock period of the memory controller. Also, no other northbridge +// looks at SPD_CMD_SIGNAL_INPUT_HOLD_TIME.
// Switch to 2 clocks for address/command if required by any one of the DIMMs // NOTE: At 133 MHz, 1 clock == 7.52 ns - value = spd_read_byte(dimm_socket_address, SPD_CMD_SIGNAL_INPUT_HOLD_TIME); + value = + spd_read_byte(dimm_socket_address, + SPD_CMD_SIGNAL_INPUT_HOLD_TIME); die_on_spd_error(value); - if(value >= 0xa0) { /* At 133MHz this constant should be 0x75 */ - controller_mode &= ~(1<<16); /* Use two clock cyles instead of one */ + if (value >= 0xa0) { /* At 133MHz this constant should be 0x75 */ + controller_mode &= ~(1 << 16); /* Use two clock cyles instead of one */ } #endif - - /* go to the next DIMM */ + + /* go to the next DIMM */ }
controller_mode |= (system_refresh_mode << 8); @@ -1502,54 +1580,54 @@ }
//---------------------------------------------------------------------------------- -// Function: configure_e7501_row_attributes -// Parameters: ctrl - PCI addresses of memory controller functions, and -// SMBus addresses of DIMM slots on the mainboard -// dimm_mask - bitmask of populated DIMMs on the board - see -// spd_get_supported_dimms() -// Return Value: None -// Description: Configure the E7501's DRAM Row Attributes (DRA) registers -// based on DIMM parameters read via SPD. This tells the controller -// the width of the SDRAM chips on each DIMM side (x4 or x8) and -// the page size of each DIMM side (4, 8, 16, or 32 KB). +// Function: configure_e7501_row_attributes +// Parameters: ctrl - PCI addresses of memory controller functions, and +// SMBus addresses of DIMM slots on the mainboard +// dimm_mask - bitmask of populated DIMMs on the board - see +// spd_get_supported_dimms() +// Return Value: None +// Description: Configure the E7501's DRAM Row Attributes (DRA) registers +// based on DIMM parameters read via SPD. This tells the controller +// the width of the SDRAM chips on each DIMM side (x4 or x8) and +// the page size of each DIMM side (4, 8, 16, or 32 KB). // -static void configure_e7501_row_attributes(const struct mem_controller *ctrl, - uint8_t dimm_mask) +static void configure_e7501_row_attributes(const struct mem_controller + *ctrl, uint8_t dimm_mask) { int i; uint32_t row_attributes = 0; - - for (i = 0; i < MAX_DIMM_SOCKETS_PER_CHANNEL; i++) {
- uint16_t dimm_socket_address = ctrl->channel0[i]; - struct dimm_size page_size; - struct dimm_size sdram_width; + for (i = 0; i < MAX_DIMM_SOCKETS_PER_CHANNEL; i++) { + + uint16_t dimm_socket_address = ctrl->channel0[i]; + struct dimm_size page_size; + struct dimm_size sdram_width;
if (!(dimm_mask & (1 << i))) - continue; // This DIMM not usable + continue; // This DIMM not usable
// Get the relevant parameters via SPD - page_size = sdram_spd_get_page_size(dimm_socket_address); + page_size = sdram_spd_get_page_size(dimm_socket_address); sdram_width = sdram_spd_get_width(dimm_socket_address);
// Update the DRAM Row Attributes. // Page size is encoded as log2(page size in bits) - log2(8 Kb) // NOTE: 8 Kb = 2^13 - row_attributes |= (page_size.side1 - 13) << (i<<3); // Side 1 of each DIMM is an EVEN row + row_attributes |= (page_size.side1 - 13) << (i << 3); // Side 1 of each DIMM is an EVEN row
if (sdram_width.side2 > 0) - row_attributes |= (page_size.side2 - 13) << ((i<<3) + 4); // Side 2 is ODD + row_attributes |= (page_size.side2 - 13) << ((i << 3) + 4); // Side 2 is ODD
// Set x4 flags if appropriate if (sdram_width.side1 == 4) { - row_attributes |= 0x08 << (i<<3); + row_attributes |= 0x08 << (i << 3); }
if (sdram_width.side2 == 4) { - row_attributes |= 0x08 << ((i<<3) + 4); - } - - /* go to the next DIMM */ + row_attributes |= 0x08 << ((i << 3) + 4); + } + + /* go to the next DIMM */ }
/* Write the new row attributes register */ @@ -1557,12 +1635,12 @@ }
//---------------------------------------------------------------------------------- -// Function: enable_e7501_clocks -// Parameters: dimm_mask - bitmask of populated DIMMs on the board - see -// spd_get_supported_dimms() -// Return Value: None -// Description: Enable clock signals for populated DIMM sockets and disable them -// for unpopulated sockets (to reduce EMI). +// Function: enable_e7501_clocks +// Parameters: dimm_mask - bitmask of populated DIMMs on the board - see +// spd_get_supported_dimms() +// Return Value: None +// Description: Enable clock signals for populated DIMM sockets and disable them +// for unpopulated sockets (to reduce EMI). // static void enable_e7501_clocks(uint8_t dimm_mask) { @@ -1571,30 +1649,29 @@
for (i = 0; i < MAX_DIMM_SOCKETS_PER_CHANNEL; i++) {
- uint8_t socket_mask = 1 << i; + uint8_t socket_mask = 1 << i;
if (dimm_mask & socket_mask) clock_disable &= ~socket_mask; // DIMM present, enable clock else clock_disable |= socket_mask; // DIMM absent, disable clock } - + pci_write_config8(PCI_DEV(0, 0, 0), CKDIS, clock_disable); }
- /*^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^*/ /* DIMM-DEDEPENDENT CONFIGURATION FUNCTIONS */ /**********************************************************************************/
//---------------------------------------------------------------------------------- -// Function: RAM_RESET_DDR_PTR -// Parameters: ctrl - PCI addresses of memory controller functions, and -// SMBus addresses of DIMM slots on the mainboard -// Return Value: None -// Description: DDR Receive FIFO RE-Sync (?) +// Function: RAM_RESET_DDR_PTR +// Parameters: ctrl - PCI addresses of memory controller functions, and +// SMBus addresses of DIMM slots on the mainboard +// Return Value: None +// Description: DDR Receive FIFO RE-Sync (?) // -static void RAM_RESET_DDR_PTR(void) +static void RAM_RESET_DDR_PTR(void) { uint8_t byte; byte = pci_read_config8(PCI_DEV(0, 0, 0), 0x88); @@ -1607,28 +1684,28 @@ }
//---------------------------------------------------------------------------------- -// Function: ram_set_d0f0_regs -// Parameters: None -// Return Value: None -// Description: Set E7501 registers that are either independent of DIMM specifics, -// or establish default settings that will be overridden when we -// learn the specifics. -// This sets PCI configuration registers to known good values based -// on the table 'constant_register_values', which are a triple of -// configuration register offset, mask, and bits to set. +// Function: ram_set_d0f0_regs +// Parameters: None +// Return Value: None +// Description: Set E7501 registers that are either independent of DIMM specifics, +// or establish default settings that will be overridden when we +// learn the specifics. +// This sets PCI configuration registers to known good values based +// on the table 'constant_register_values', which are a triple of +// configuration register offset, mask, and bits to set. // -static void ram_set_d0f0_regs(void) +static void ram_set_d0f0_regs(void) { int i; int num_values = ARRAY_SIZE(constant_register_values);
- ASSERT((num_values % 3) == 0); // Bad table? + ASSERT((num_values % 3) == 0); // Bad table?
- for(i = 0; i < num_values; i += 3) { + for (i = 0; i < num_values; i += 3) {
uint32_t register_offset = constant_register_values[i]; - uint32_t bits_to_mask = constant_register_values[i+1]; - uint32_t bits_to_set = constant_register_values[i+2]; + uint32_t bits_to_mask = constant_register_values[i + 1]; + uint32_t bits_to_set = constant_register_values[i + 2]; uint32_t register_value;
// It's theoretically possible to set values for something other than D0:F0, @@ -1639,25 +1716,27 @@ // Again, not strictly an error, but flagged as a potential bug ASSERT((bits_to_mask & bits_to_set) == 0);
- register_value = pci_read_config32(PCI_DEV(0, 0, 0), register_offset); - register_value &= bits_to_mask; - register_value |= bits_to_set; + register_value = + pci_read_config32(PCI_DEV(0, 0, 0), register_offset); + register_value &= bits_to_mask; + register_value |= bits_to_set;
- pci_write_config32(PCI_DEV(0, 0, 0), register_offset, register_value); - } + pci_write_config32(PCI_DEV(0, 0, 0), register_offset, + register_value); + } }
//---------------------------------------------------------------------------------- -// Function: write_8dwords -// Parameters: src_addr -// dst_addr -// Return Value: None -// Description: Copy 64 bytes from one location to another. +// Function: write_8dwords +// Parameters: src_addr +// dst_addr +// Return Value: None +// Description: Copy 64 bytes from one location to another. // -static void write_8dwords(uint32_t* src_addr, uint32_t dst_addr) +static void write_8dwords(const uint32_t * src_addr, uint32_t dst_addr) { int i; - for (i=0; i<8; i++) { + for (i = 0; i < 8; i++) { write32(dst_addr, *src_addr); src_addr++; dst_addr += sizeof(uint32_t); @@ -1665,43 +1744,41 @@ }
//---------------------------------------------------------------------------------- -// Function: ram_set_rcomp_regs -// Parameters: None -// Return Value: None -// Description: Set the E7501's (undocumented) RCOMP registers. -// Per the 855PM datasheet and IXP2800 HW Initialization Reference -// Manual, RCOMP registers appear to affect drive strength, -// pullup/pulldown offset, and slew rate of various signal groups. -// Comments below are conjecture based on apparent similarity -// between the E7501 and these two chips. +// Function: ram_set_rcomp_regs +// Parameters: None +// Return Value: None +// Description: Set the E7501's (undocumented) RCOMP registers. +// Per the 855PM datasheet and IXP2800 HW Initialization Reference +// Manual, RCOMP registers appear to affect drive strength, +// pullup/pulldown offset, and slew rate of various signal groups. +// Comments below are conjecture based on apparent similarity +// between the E7501 and these two chips. // -static void ram_set_rcomp_regs(void) +static void ram_set_rcomp_regs(void) { uint32_t dword; uint8_t maybe_strength_control;
RAM_DEBUG_MESSAGE("Setting RCOMP registers.\n");
- /*enable access to the rcomp bar*/ + /*enable access to the rcomp bar */ dword = pci_read_config32(PCI_DEV(0, 0, 0), MAYBE_MCHTST); - dword |= (1<<22); - pci_write_config32(PCI_DEV(0, 0, 0), MAYBE_MCHTST, dword); - + dword |= (1 << 22); + pci_write_config32(PCI_DEV(0, 0, 0), MAYBE_MCHTST, dword);
// Set the RCOMP MMIO base address - pci_write_config32(PCI_DEV(0, 0, 0), MAYBE_SMRBASE, RCOMP_MMIO); + pci_write_config32(PCI_DEV(0, 0, 0), MAYBE_SMRBASE, RCOMP_MMIO);
// Block RCOMP updates while we configure the registers dword = read32(RCOMP_MMIO + MAYBE_SMRCTL); - dword |= (1<<9); + dword |= (1 << 9); write32(RCOMP_MMIO + MAYBE_SMRCTL, dword); -
/* Begin to write the RCOMP registers */
// Set CMD and DQ/DQS strength to 2x (?) maybe_strength_control = read8(RCOMP_MMIO + MAYBE_DQCMDSTR) & 0x88; - maybe_strength_control |= 0x44; + maybe_strength_control |= 0x44; write8(RCOMP_MMIO + MAYBE_DQCMDSTR, maybe_strength_control);
write_8dwords(maybe_2x_slew_table, RCOMP_MMIO + 0x80); @@ -1711,19 +1788,18 @@
// NOTE: some factory BIOS set 0x9088 here. Seems to work either way. write16(RCOMP_MMIO + 0x40, 0); -
// Set RCVEnOut# strength to 2x (?) maybe_strength_control = read8(RCOMP_MMIO + MAYBE_RCVENSTR) & 0xF8; - maybe_strength_control |= 4; + maybe_strength_control |= 4; write8(RCOMP_MMIO + MAYBE_RCVENSTR, maybe_strength_control);
write_8dwords(maybe_2x_slew_table, RCOMP_MMIO + 0x1c0); write16(RCOMP_MMIO + 0x50, 0); - + // Set CS# strength for x4 SDRAM to 2x (?) maybe_strength_control = read8(RCOMP_MMIO + MAYBE_CSBSTR) & 0xF8; - maybe_strength_control |= 4; + maybe_strength_control |= 4; write8(RCOMP_MMIO + MAYBE_CSBSTR, maybe_strength_control);
write_8dwords(maybe_2x_slew_table, RCOMP_MMIO + 0x140); @@ -1731,7 +1807,7 @@
// Set CKE strength for x4 SDRAM to 2x (?) maybe_strength_control = read8(RCOMP_MMIO + MAYBE_CKESTR) & 0xF8; - maybe_strength_control |= 4; + maybe_strength_control |= 4; write8(RCOMP_MMIO + MAYBE_CKESTR, maybe_strength_control);
write_8dwords(maybe_2x_slew_table, RCOMP_MMIO + 0xa0); @@ -1739,7 +1815,7 @@
// Set CK strength for x4 SDRAM to 1x (?) maybe_strength_control = read8(RCOMP_MMIO + MAYBE_CKSTR) & 0xF8; - maybe_strength_control |= 1; + maybe_strength_control |= 1; write8(RCOMP_MMIO + MAYBE_CKSTR, maybe_strength_control);
write_8dwords(maybe_pull_updown_offset_table, RCOMP_MMIO + 0x180); @@ -1747,12 +1823,11 @@
write8(RCOMP_MMIO + 0x2c, 0xff);
- // Set the digital filter length to 8 (?) dword = read32(RCOMP_MMIO + MAYBE_SMRCTL);
// NOTE: Some factory BIOS don't do this. - // Doesn't seem to matter either way. + // Doesn't seem to matter either way. dword &= ~2;
dword |= 1; @@ -1760,25 +1835,25 @@
/* Wait 40 usec */ SLOW_DOWN_IO; - + /* unblock updates */ dword = read32(RCOMP_MMIO + MAYBE_SMRCTL); - dword &= ~(1<<9); + dword &= ~(1 << 9); write32(RCOMP_MMIO + MAYBE_SMRCTL, dword);
// Force a RCOMP measurement cycle? - dword |= (1<<8); + dword |= (1 << 8); write32(RCOMP_MMIO + MAYBE_SMRCTL, dword); - dword &= ~(1<<8); + dword &= ~(1 << 8); write32(RCOMP_MMIO + MAYBE_SMRCTL, dword); - + /* Wait 40 usec */ SLOW_DOWN_IO;
/*disable access to the rcomp bar */ dword = pci_read_config32(PCI_DEV(0, 0, 0), MAYBE_MCHTST); - dword &= ~(1<<22); - pci_write_config32(PCI_DEV(0, 0, 0), MAYBE_MCHTST, dword); + dword &= ~(1 << 22); + pci_write_config32(PCI_DEV(0, 0, 0), MAYBE_MCHTST, dword);
}
@@ -1787,16 +1862,17 @@ /**********************************************************************************/
//---------------------------------------------------------------------------------- -// Function: sdram_enable -// Parameters: controllers - not used -// ctrl - PCI addresses of memory controller functions, and -// SMBus addresses of DIMM slots on the mainboard -// Return Value: None -// Description: Go through the JEDEC initialization sequence for all DIMMs, -// then enable refresh and initialize ECC and memory to zero. -// Upon exit, SDRAM is up and running. +// Function: sdram_enable +// Parameters: controllers - not used +// ctrl - PCI addresses of memory controller functions, and +// SMBus addresses of DIMM slots on the mainboard +// Return Value: None +// Description: Go through the JEDEC initialization sequence for all DIMMs, +// then enable refresh and initialize ECC and memory to zero. +// Upon exit, SDRAM is up and running. // -static void sdram_enable(int controllers, const struct mem_controller *ctrl) +static void sdram_enable(int controllers, + const struct mem_controller *ctrl) { uint8_t dimm_mask = pci_read_config16(PCI_DEV(0, 0, 0), SKPD); uint32_t dram_controller_mode; @@ -1809,111 +1885,107 @@ RAM_DEBUG_MESSAGE("Ram Enable 2\n");
/* A 200us delay is needed */ - - DO_DELAY - EXTRA_DELAY + DO_DELAY; EXTRA_DELAY;
/* 3. Apply NOP */ RAM_DEBUG_MESSAGE("Ram Enable 3\n"); do_ram_command(RAM_COMMAND_NOP, 0); - EXTRA_DELAY + EXTRA_DELAY;
/* 4 Precharge all */ RAM_DEBUG_MESSAGE("Ram Enable 4\n"); do_ram_command(RAM_COMMAND_PRECHARGE, 0); - EXTRA_DELAY - + EXTRA_DELAY; /* wait until the all banks idle state... */ + /* 5. Issue EMRS to enable DLL */ RAM_DEBUG_MESSAGE("Ram Enable 5\n"); - do_ram_command(RAM_COMMAND_EMRS, SDRAM_EXTMODE_DLL_ENABLE | SDRAM_EXTMODE_DRIVE_NORMAL); - EXTRA_DELAY - + do_ram_command(RAM_COMMAND_EMRS, + SDRAM_EXTMODE_DLL_ENABLE | + SDRAM_EXTMODE_DRIVE_NORMAL); + EXTRA_DELAY; + /* 6. Reset DLL */ RAM_DEBUG_MESSAGE("Ram Enable 6\n"); set_ram_mode(E7501_SDRAM_MODE | SDRAM_MODE_DLL_RESET); - EXTRA_DELAY - + EXTRA_DELAY; /* Ensure a 200us delay between the DLL reset in step 6 and the final * mode register set in step 9. * Infineon needs this before any other command is sent to the ram. */ - DO_DELAY - EXTRA_DELAY - + DO_DELAY; EXTRA_DELAY; + /* 7 Precharge all */ RAM_DEBUG_MESSAGE("Ram Enable 7\n"); do_ram_command(RAM_COMMAND_PRECHARGE, 0); - EXTRA_DELAY - + EXTRA_DELAY; + /* 8 Now we need 2 AUTO REFRESH / CBR cycles to be performed */ RAM_DEBUG_MESSAGE("Ram Enable 8\n"); do_ram_command(RAM_COMMAND_CBR, 0); - EXTRA_DELAY + EXTRA_DELAY; do_ram_command(RAM_COMMAND_CBR, 0); - EXTRA_DELAY + EXTRA_DELAY; + /* And for good luck 6 more CBRs */ do_ram_command(RAM_COMMAND_CBR, 0); - EXTRA_DELAY + EXTRA_DELAY; do_ram_command(RAM_COMMAND_CBR, 0); - EXTRA_DELAY + EXTRA_DELAY; do_ram_command(RAM_COMMAND_CBR, 0); - EXTRA_DELAY + EXTRA_DELAY; do_ram_command(RAM_COMMAND_CBR, 0); - EXTRA_DELAY + EXTRA_DELAY; do_ram_command(RAM_COMMAND_CBR, 0); - EXTRA_DELAY + EXTRA_DELAY; do_ram_command(RAM_COMMAND_CBR, 0); - EXTRA_DELAY + EXTRA_DELAY;
/* 9 mode register set */ RAM_DEBUG_MESSAGE("Ram Enable 9\n"); set_ram_mode(E7501_SDRAM_MODE | SDRAM_MODE_NORMAL); - EXTRA_DELAY - + EXTRA_DELAY; + /* 10 DDR Receive FIFO RE-Sync */ RAM_DEBUG_MESSAGE("Ram Enable 10\n"); RAM_RESET_DDR_PTR(); - EXTRA_DELAY - + EXTRA_DELAY; + /* 11 normal operation */ RAM_DEBUG_MESSAGE("Ram Enable 11\n"); do_ram_command(RAM_COMMAND_NORMAL, 0); - EXTRA_DELAY + EXTRA_DELAY;
// Reconfigure the row boundaries and Top of Low Memory // to match the true size of the DIMMs configure_e7501_ram_addresses(ctrl, dimm_mask);
- /* Finally enable refresh */ + /* Finally enable refresh */ dram_controller_mode = pci_read_config32(PCI_DEV(0, 0, 0), DRC); dram_controller_mode |= (1 << 29); pci_write_config32(PCI_DEV(0, 0, 0), DRC, dram_controller_mode); - EXTRA_DELAY - + EXTRA_DELAY; initialize_ecc();
- dram_controller_mode = pci_read_config32(PCI_DEV(0, 0, 0), DRC); /* FCS_EN */ - dram_controller_mode |= (1<<17); // NOTE: undocumented reserved bit + dram_controller_mode = pci_read_config32(PCI_DEV(0, 0, 0), DRC); /* FCS_EN */ + dram_controller_mode |= (1 << 17); // NOTE: undocumented reserved bit pci_write_config32(PCI_DEV(0, 0, 0), DRC, dram_controller_mode);
RAM_DEBUG_MESSAGE("Northbridge following SDRAM init:\n"); DUMPNORTH(); - -// verify_ram(); }
//---------------------------------------------------------------------------------- -// Function: sdram_set_spd_registers -// Parameters: ctrl - PCI addresses of memory controller functions, and -// SMBus addresses of DIMM slots on the mainboard -// Return Value: None -// Description: Configure SDRAM controller parameters that depend on -// characteristics of the DIMMs installed in the system. These -// characteristics are read from the DIMMs via the standard Serial -// Presence Detect (SPD) interface. +// Function: sdram_set_spd_registers +// Parameters: ctrl - PCI addresses of memory controller functions, and +// SMBus addresses of DIMM slots on the mainboard +// Return Value: None +// Description: Configure SDRAM controller parameters that depend on +// characteristics of the DIMMs installed in the system. These +// characteristics are read from the DIMMs via the standard Serial +// Presence Detect (SPD) interface. // -static void sdram_set_spd_registers(const struct mem_controller *ctrl) +static void sdram_set_spd_registers(const struct mem_controller *ctrl) { uint8_t dimm_mask;
@@ -1934,29 +2006,30 @@ RAM_RESET_DDR_PTR();
configure_e7501_dram_timing(ctrl, dimm_mask); - DO_DELAY + DO_DELAY; RAM_DEBUG_MESSAGE("done\n"); }
- // NOTE: configure_e7501_ram_addresses() is NOT called here. - // We want to keep the default 64 MB/row mapping until sdram_enable() is called, - // even though the default mapping is almost certainly incorrect. - // The default mapping makes it easy to initialize all of the DIMMs - // even if the total system memory is > 4 GB. - // - // Save the dimm_mask for when sdram_enable is called, so it can call - // configure_e7501_ram_addresses() without having to regenerate the bitmask - // of usable DIMMs. + /* NOTE: configure_e7501_ram_addresses() is NOT called here. + * We want to keep the default 64 MB/row mapping until sdram_enable() is called, + * even though the default mapping is almost certainly incorrect. + * The default mapping makes it easy to initialize all of the DIMMs + * even if the total system memory is > 4 GB. + * + * Save the dimm_mask for when sdram_enable is called, so it can call + * configure_e7501_ram_addresses() without having to regenerate the bitmask + * of usable DIMMs. + */ pci_write_config16(PCI_DEV(0, 0, 0), SKPD, dimm_mask); }
//---------------------------------------------------------------------------------- -// Function: sdram_set_registers -// Parameters: ctrl - PCI addresses of memory controller functions, and -// SMBus addresses of DIMM slots on the mainboard -// Return Value: None -// Description: Do basic ram setup that does NOT depend on serial presence detect -// information (i.e. independent of DIMM specifics). +// Function: sdram_set_registers +// Parameters: ctrl - PCI addresses of memory controller functions, and +// SMBus addresses of DIMM slots on the mainboard +// Return Value: None +// Description: Do basic ram setup that does NOT depend on serial presence detect +// information (i.e. independent of DIMM specifics). // static void sdram_set_registers(const struct mem_controller *ctrl) { @@ -1968,5 +2041,5 @@ }
/*^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^*/ -/* PUBLIC INTERFACE */ +/* PUBLIC INTERFACE */ /**********************************************************************************/
Modified: trunk/src/northbridge/intel/e7501/raminit.h ============================================================================== --- trunk/src/northbridge/intel/e7501/raminit.h Thu Apr 15 10:26:30 2010 (r5441) +++ trunk/src/northbridge/intel/e7501/raminit.h Thu Apr 15 14:39:29 2010 (r5442) @@ -15,5 +15,8 @@ uint16_t channel1[MAX_DIMM_SOCKETS_PER_CHANNEL]; };
+#ifndef __ROMCC__ +void sdram_initialize(int controllers, const struct mem_controller *ctrl); +#endif
#endif /* RAMINIT_H */
Modified: trunk/src/northbridge/intel/i82830/northbridge.c ============================================================================== --- trunk/src/northbridge/intel/i82830/northbridge.c Thu Apr 15 10:26:30 2010 (r5441) +++ trunk/src/northbridge/intel/i82830/northbridge.c Thu Apr 15 14:39:29 2010 (r5442) @@ -29,7 +29,6 @@ #include <string.h> #include <bitops.h> #include <boot/tables.h> -#include <arch/coreboot_tables.h> #include "chip.h" #include "i82830.h"
Modified: trunk/src/northbridge/intel/i945/northbridge.c ============================================================================== --- trunk/src/northbridge/intel/i945/northbridge.c Thu Apr 15 10:26:30 2010 (r5441) +++ trunk/src/northbridge/intel/i945/northbridge.c Thu Apr 15 14:39:29 2010 (r5442) @@ -31,7 +31,6 @@ #include <boot/tables.h> #include "chip.h" #include "i945.h" -#include <arch/coreboot_tables.h>
static int get_pcie_bar(u32 *base, u32 *len) {
Modified: trunk/src/southbridge/intel/i82801ex/i82801ex_early_smbus.c ============================================================================== --- trunk/src/southbridge/intel/i82801ex/i82801ex_early_smbus.c Thu Apr 15 10:26:30 2010 (r5441) +++ trunk/src/southbridge/intel/i82801ex/i82801ex_early_smbus.c Thu Apr 15 14:39:29 2010 (r5442) @@ -29,6 +29,7 @@ return do_smbus_read_byte(SMBUS_IO_BASE, device, address); }
+#ifdef UNUSED_CODE static void smbus_write_byte(unsigned device, unsigned address, unsigned char val) { if (smbus_wait_until_ready(SMBUS_IO_BASE) < 0) { @@ -126,4 +127,4 @@ print_debug("SMBUS Block complete\n"); return 0; } - +#endif
Modified: trunk/src/southbridge/via/vt8235/vt8235.c ============================================================================== --- trunk/src/southbridge/via/vt8235/vt8235.c Thu Apr 15 10:26:30 2010 (r5441) +++ trunk/src/southbridge/via/vt8235/vt8235.c Thu Apr 15 14:39:29 2010 (r5442) @@ -7,18 +7,9 @@ #include <pc80/i8259.h> #include "chip.h"
-/* - * Base VT8235. - */ - -void hard_reset(void) -{ - printk(BIOS_ERR, "NO HARD RESET ON VT8235! FIX ME!\n"); -} - static void keyboard_on(struct device *dev) { - unsigned char regval; + u8 regval;
regval = pci_read_config8(dev, 0x51); regval |= 0x05; @@ -28,6 +19,7 @@ pc_keyboard_init(0); }
+#ifdef UNUSED_CODE void dump_south(device_t dev0) { int i,j; @@ -43,33 +35,37 @@
void set_led(void) { - // set power led to steady now that lxbios has virtually done its job + // set power led to steady now that coreboot has virtually done its job device_t dev; dev = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, 0); pci_write_config8(dev, 0x94, 0xb0); } - +#endif
static void vt8235_enable(struct device *dev) { - unsigned char regval; - unsigned short vendor,model; + u8 regval; + u16 vendor,model;
vendor = pci_read_config16(dev,0); model = pci_read_config16(dev,0x2);
printk(BIOS_DEBUG, "In vt8235_enable %04x %04x.\n",vendor,model); - /* if this is not the southbridge itself just return */ - /* this is necessary because USB devices are slot 10, whereas this device is slot 11 - therefore usb devices get called first during the bus scan */ + /* If this is not the southbridge itself just return. + * This is necessary because USB devices are slot 10, whereas this + * device is slot 11 therefore usb devices get called first during + * the bus scan. We don't want to wait until we could do dev->init + * because that's too late. + */
if( (vendor != PCI_VENDOR_ID_VIA) || (model != PCI_DEVICE_ID_VIA_8235)) return;
printk(BIOS_DEBUG, "Initialising Devices\n");
- setup_i8259(); // make sure interupt controller is configured before keyboard init + /* make sure interupt controller is configured before keyboard init */ + setup_i8259();
/* enable RTC and ethernet */ regval = pci_read_config8(dev, 0x51); @@ -79,7 +75,9 @@ /* turn on keyboard */ keyboard_on(dev);
- /* enable USB 1.1 & USB 2.0 -redundant really since we've already been there - see note above*/ + /* enable USB 1.1 & USB 2.0 - redundant really since we've + * already been there - see note above + */ regval = pci_read_config8(dev, 0x50); regval &= ~(0x36); pci_write_config8(dev, 0x50, regval);
-
repository service