I've compiled support for the Siemens 'sitemp' Mainboard. The board is similar to the AMD dbm690t. I adapt the code from the dbm690t according to customer requirement specification.
I've been testing Linux as well as Windows XP booting on this board.
Added 2 patches: 0001-mainboard-siemens.patch 0002-mainboard_kconfig.patch
Signed-off-by: Josef Kellermann seppk@arcor.de mailto://seppk@arcor.de
On Tue, 10 May 2011 19:35:03 +0200, Josef Kellermann wrote:
I adapt the code from the dbm690t according to customer requirement specification.
I copied amd/dbm690t first as a base, to preserve history. I hope that's okay.
I've been testing Linux as well as Windows XP booting on this board.
First, thank you for all your work to get this board running with coreboot. Second, sorry that it took so long - you've been sending more patches than should have been necessary to get this in.
I had to change a couple of things for integrating the changes properly with a current tree: - GENERATE_ACPI_TABLES -> HAVE_ACPI_TABLES in Kconfig - Dropped cmos.default in Makefile.inc. Remedy: Enable CONFIG_HAVE_CMOS_DEFAULT and src/pc80/Makefile.inc will pick it up. This is necessary because otherwise our autobuilder fails (as there is no cmos.default file to use). - updated mptable.c a bit: Use of mptable_init (which changes mpc_oem and mpc_productid, if you depend on these, please review!), mptable_write_buses instead of mptable_write_bus (which might change ISA bus numbering, look in the serial log, coreboot will complain in that case). These were necessary because the mptable APIs changed since you branched off of dbm690t.
I've seen more things that could/should be done, but these were the critical bits.
Committed as r6567.
Regards, Patrick
-
Josef Kellermann -
Patrick Georgi