Re: boot from ide

[Gin]

Thanks, 
I got an error while specifying the fall back rom image size of larger
than 64K. See below:

1. When ROM_IMAGE_SIZE = 0x2000
./buildrom linuxbios.strip linuxbios.rom /opt/filo/fallback/filo.elf
0x20000 0x40000
linuxbios image is 131087 bytes; only 131072 allowed
Linuxbios input file larger than allowed size!
: Success
make: *** [linuxbios.rom] Error 2

2.When ROM_IMAGE_SIZE = 0x3000
./buildrom linuxbios.strip linuxbios.rom /opt/filo/fallback/filo.elf
0x30000 0x40000
linuxbios image is 196623 bytes; only 196608 allowed
Linuxbios input file larger than allowed size!
: Success
make: *** [linuxbios.rom] Error 2

-----Original Message-----
From: [e-mail]
[mailto:[e-mail]] On Behalf Of Greg Watson
Sent: Thursday, November 18, 2004 10:21 AM
To: Gin
Cc: 'LinuxBIOS'
Subject: Re: boot from ide

Actually, don't set CONFIG_FS_STREAM if you're using Filo as a payload. 
Use the CONFIG_IDE_STREAM instead.

Greg

On Nov 17, 2004, at 7:05 PM, Gin wrote:
> Hello,
> I've got my linuxbios run to the point it tries to load the image from
> an IDE drive. I use FILO as the payload.
> What do I have to add in the Config.lb file to make it use filo? I
>
> know CONFIG_FS_STREAM should be set to true. What else?
> I remembered linuxbios supports ROM image size larger than 64K now.
>
> But when got compiler errors when specifies it as 128K. Do I miss
> anything?
>
> Gin
>
> Linuxbios mailing list
> [e-mail]
> http://www.clustermatic.org/mailman/listinfo/linuxbios

_______________________________________________
Linuxbios mailing list
[e-mail]
http://www.clustermatic.org/mailman/listinfo/linuxbios