How can I transfer file to LinuxBIOS machine

[gimyung han]

I'm trying to enable vgabios on my LinuxBIOS machine.

Currently, my EPIA computer is not supporting vga bios and I didn't backup 
my original BIOS.

Fortunately, I have another machine(EPIA-M), so I extract vgabios from BIOS 
on EPIA-M.

I transfered vga bios to my host computer hooked up with EPIA machine.

According to the HOWTO, EPIA machine is given a static IP address from host 
computer. (by its MAC address).

so, I tried to connect to host computer via telnet, but I failed. I think 
network card on EPIA board  is not detected. (I compiled kernel image on 
other computer)

is there any way to connect to EPIA computer and transfer vga bios to it.

Thanks for any help.
> From poor beginner

_________________________________________________________________
MSN Messenger를 통해 온라인상에 있는 친구와 대화를 나누세요.   
http://messenger.msn.co.kr

[SONE Takeshi]

On Sat, Aug 02, 2003 at 02:01:38PM +0000, gimyung han wrote:
> I'm trying to enable vgabios on my LinuxBIOS machine.
>
> Currently, my EPIA computer is not supporting vga bios and I didn't backup 
> my original BIOS.
>
> Fortunately, I have another machine(EPIA-M), so I extract vgabios from BIOS 
> on EPIA-M.
>
> I transfered vga bios to my host computer hooked up with EPIA machine.

EPIA-M has different VGA device, so the VGA BIOS of EPIA-M
might not work on EPIA.
You can use DOS program CBROM (google for it) to extract VGA BIOS
from the EPIA BIOS image on the VIA's download page.