r3091 - trunk/util/flashrom

Author: hailfinger
Date: 2008-02-06 23:07:58 +0100 (Wed, 06 Feb 2008)
New Revision: 3091

Modified:
   trunk/util/flashrom/flash.h
   trunk/util/flashrom/flashchips.c
   trunk/util/flashrom/spi.c
Log:
Handle JEDEC JEP106W continuation codes in SPI RDID. Some vendors like
Programmable Micro Corp (PMC) need this.
Both the serial and parallel flash JEDEC detection routines would
benefit from a parity/sanity check of the vendor ID. Will do this later.

Add support for the PMC Pm25LV family of SPI flash chips.

Signed-off-by: Carl-Daniel Hailfinger 
Acked-by: Chris Lingard

Modified: trunk/util/flashrom/flash.h
===================================================================
--- trunk/util/flashrom/flash.h	2008-02-05 21:53:15 UTC (rev 3090)
+++ trunk/util/flashrom/flash.h	2008-02-06 22:07:58 UTC (rev 3091)
@@ -158,7 +158,20 @@
 /* Programmable Micro Corp is listed in JEP106W in bank 2, so it should have
  * a 0x7F continuation code prefix.
  */
-#define PMC_ID			0x9D	/* PMC */
+#define PMC_ID			0x7F9D	/* PMC */
+#define PMC_ID_NOPREFIX		0x9D	/* PMC, missing 0x7F prefix */
+#define PMC_25LV512		0x7B
+#define PMC_25LV010		0x7C
+#define PMC_25LV020		0x7D
+#define PMC_25LV040		0x7E
+#define PMC_25LV080B		0x13
+#define PMC_25LV016B		0x14
+#define PMC_39LV512		0x1B
+#define PMC_39F010		0x1C	/* also Pm39LV010 */
+#define PMC_39LV020		0x3D
+#define PMC_39LV040		0x3E
+#define PMC_39F020		0x4D
+#define PMC_39F040		0x4E
 #define PMC_49FL002		0x6D
 #define PMC_49FL004		0x6E

Modified: trunk/util/flashrom/flashchips.c
===================================================================
--- trunk/util/flashrom/flashchips.c	2008-02-05 21:53:15 UTC (rev 3090)
+++ trunk/util/flashrom/flashchips.c	2008-02-06 22:07:58 UTC (rev 3091)
@@ -100,10 +100,22 @@
     probe_49lfxxxc, erase_49lfxxxc, write_49lfxxxc},
    {"SST49LF160C", SST_ID,		SST_49LF160C, 	2048, 4 * 1024 ,
     probe_49lfxxxc, erase_49lfxxxc, write_49lfxxxc},
-	{"Pm49FL002",	PMC_ID,		PMC_49FL002,	256, 16 * 1024,
+	{"Pm49FL002",	PMC_ID_NOPREFIX,	PMC_49FL002,	256, 16 * 1024,
     probe_jedec,	erase_chip_jedec, write_49fl004},
-	{"Pm49FL004",	PMC_ID,		PMC_49FL004,	512, 64 * 1024,
+	{"Pm49FL004",	PMC_ID_NOPREFIX,	PMC_49FL004,	512, 64 * 1024,
     probe_jedec,	erase_chip_jedec, write_49fl004},
+	{"Pm25LV512",	PMC_ID,	PMC_25LV512,	64, 256,
+	 probe_spi,	generic_spi_chip_erase_c7,	generic_spi_chip_write,	generic_spi_chip_read},
+	{"Pm25LV010",	PMC_ID,	PMC_25LV010,	128, 256,
+	 probe_spi,	generic_spi_chip_erase_c7,	generic_spi_chip_write,	generic_spi_chip_read},
+	{"Pm25LV020",	PMC_ID,	PMC_25LV020,	256, 256,
+	 probe_spi,	generic_spi_chip_erase_c7,	generic_spi_chip_write,	generic_spi_chip_read},
+	{"Pm25LV040",	PMC_ID,	PMC_25LV040,	512, 256,
+	 probe_spi,	generic_spi_chip_erase_c7,	generic_spi_chip_write,	generic_spi_chip_read},
+	{"Pm25LV080B",	PMC_ID,	PMC_25LV080B,	1024, 256,
+	 probe_spi,	generic_spi_chip_erase_c7,	generic_spi_chip_write,	generic_spi_chip_read},
+	{"Pm25LV016B",	PMC_ID,	PMC_25LV016B,	2048, 256,
+	 probe_spi,	generic_spi_chip_erase_c7,	generic_spi_chip_write,	generic_spi_chip_read},
    {"W29C011",	WINBOND_ID,	W_29C011,	128, 128,
     probe_jedec,	erase_chip_jedec, write_jedec},
    {"W29C040P",	WINBOND_ID,	W_29C040P,	512, 256,
@@ -205,6 +217,8 @@
     probe_spi,	NULL,	NULL},
    {"MX unknown SPI chip",	MX_ID,	GENERIC_DEVICE_ID,	0, 0,
     probe_spi,	NULL,	NULL},
+	{"PMC unknown SPI chip",	PMC_ID,	GENERIC_DEVICE_ID,	0, 0,
+	 probe_spi,	NULL,	NULL},
    {"SST unknown SPI chip",	SST_ID,	GENERIC_DEVICE_ID,	0, 0,
     probe_spi,	NULL,	NULL},
    {"ST unknown SPI chip",	ST_ID,	GENERIC_DEVICE_ID,	0, 0,

Modified: trunk/util/flashrom/spi.c
===================================================================
--- trunk/util/flashrom/spi.c	2008-02-05 21:53:15 UTC (rev 3090)
+++ trunk/util/flashrom/spi.c	2008-02-06 22:07:58 UTC (rev 3091)
@@ -278,11 +278,17 @@
 int probe_spi(struct flashchip *flash)
 {
    unsigned char readarr[3];
-	uint8_t manuf_id;
-	uint16_t model_id;
+	uint32_t manuf_id;
+	uint32_t model_id;
    if (!generic_spi_rdid(readarr)) {
-		manuf_id = readarr[0];
-		model_id = (readarr[1] << 8) | readarr[2];
+		/* Check if this is a continuation vendor ID */
+		if (readarr[0] == 0x7f) {
+			manuf_id = (readarr[0] << 8) | readarr[1];
+			model_id = readarr[2];
+		} else {
+			manuf_id = readarr[0];
+			model_id = (readarr[1] << 8) | readarr[2];
+		}
    	printf_debug("%s: id1 0x%x, id2 0x%x\n", __FUNCTION__, manuf_id, model_id);
    	if (manuf_id == flash->manufacture_id &&
    	    model_id == flash->model_id) {