Frank Vibrans III (efdesign98@gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/98
-gerrit
commit 30da094c211e30e6564cb4e76b9b8e2884f318e6 Author: efdesign98 efdesign98@gmail.com Date: Wed Jul 13 17:33:10 2011 -0700
Add AMD Family 10 cpu support to northbridge folder
This change adds the AMD Family 10 cpu support to the northbridge folder. The northbridge/amd/agesa Kconfig and Makefile.inc are changed as well.
Change-Id: Id76e9fa388c79ac469a673aaedaa4f1bfd7619d9 Signed-off-by: Frank Vibrans frank.vibrans@amd.com Signed-off-by: efdesign98 efdesign98@gmail.com --- src/northbridge/amd/agesa/Kconfig | 1 + src/northbridge/amd/agesa/Makefile.inc | 1 + src/northbridge/amd/agesa/family10/Kconfig | 49 + src/northbridge/amd/agesa/family10/Makefile.inc | 22 + src/northbridge/amd/agesa/family10/amdfam10.h | 101 ++ src/northbridge/amd/agesa/family10/bootblock.c | 29 + src/northbridge/amd/agesa/family10/chip.h | 24 + src/northbridge/amd/agesa/family10/northbridge.c | 1518 ++++++++++++++++++++ src/northbridge/amd/agesa/family10/northbridge.h | 26 + src/northbridge/amd/agesa/family10/reset_test.h | 52 + .../amd/agesa/family10/root_complex/Kconfig | 2 + .../amd/agesa/family10/root_complex/chip.h | 24 + src/northbridge/amd/agesa/family10/ssdt.asl | 346 +++++ 13 files changed, 2195 insertions(+), 0 deletions(-)
diff --git a/src/northbridge/amd/agesa/Kconfig b/src/northbridge/amd/agesa/Kconfig index d5fde57..463da5d 100644 --- a/src/northbridge/amd/agesa/Kconfig +++ b/src/northbridge/amd/agesa/Kconfig @@ -17,6 +17,7 @@ # Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA #
+source src/northbridge/amd/agesa/family10/Kconfig source src/northbridge/amd/agesa/family12/Kconfig source src/northbridge/amd/agesa/family14/Kconfig
diff --git a/src/northbridge/amd/agesa/Makefile.inc b/src/northbridge/amd/agesa/Makefile.inc index 96798fc..1da8f60 100644 --- a/src/northbridge/amd/agesa/Makefile.inc +++ b/src/northbridge/amd/agesa/Makefile.inc @@ -16,5 +16,6 @@ # along with this program; if not, write to the Free Software # Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA # +subdirs-$(CONFIG_NORTHBRIDGE_AMD_AGESA_FAMILY10) += family10 subdirs-$(CONFIG_NORTHBRIDGE_AMD_AGESA_FAMILY12) += family12 subdirs-$(CONFIG_NORTHBRIDGE_AMD_AGESA_FAMILY14) += family14 diff --git a/src/northbridge/amd/agesa/family10/Kconfig b/src/northbridge/amd/agesa/family10/Kconfig new file mode 100755 index 0000000..62a6cd4 --- /dev/null +++ b/src/northbridge/amd/agesa/family10/Kconfig @@ -0,0 +1,49 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007-2009 coresystems GmbH +## Copyright (C) 2011 Advanced Micro Devices, Inc. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## +config NORTHBRIDGE_AMD_AGESA_FAMILY10 + bool + select HAVE_DEBUG_RAM_SETUP + select HAVE_DEBUG_SMBUS + select HYPERTRANSPORT_PLUGIN_SUPPORT + select MMCONF_SUPPORT + select NORTHBRIDGE_AMD_AGESA_FAMILY10_ROOT_COMPLEX + +if NORTHBRIDGE_AMD_AGESA_FAMILY10 +config HT3_SUPPORT + bool + default y +config HW_MEM_HOLE_SIZEK + hex + default 0x100000 +config HW_MEM_HOLE_SIZE_AUTO_INC + bool + default n +config MMCONF_BASE_ADDRESS + hex + default 0xE0000000 +config MMCONF_BUS_NUMBER + int + default 256 +config BOOTBLOCK_NORTHBRIDGE_INIT + string + default "northbridge/amd/agesa/family10/bootblock.c" +endif #NORTHBRIDGE_AMD_AGESA_FAMILY10 + +source "src/northbridge/amd/agesa/family10/root_complex/Kconfig" diff --git a/src/northbridge/amd/agesa/family10/Makefile.inc b/src/northbridge/amd/agesa/family10/Makefile.inc new file mode 100755 index 0000000..8f0fe0d --- /dev/null +++ b/src/northbridge/amd/agesa/family10/Makefile.inc @@ -0,0 +1,22 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2011 Advanced Micro Devices, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# + +driver-y += northbridge.c + +ramstage-$(CONFIG_GENERATE_ACPI_TABLES) += ssdt.asl diff --git a/src/northbridge/amd/agesa/family10/amdfam10.h b/src/northbridge/amd/agesa/family10/amdfam10.h new file mode 100755 index 0000000..e6f9d81 --- /dev/null +++ b/src/northbridge/amd/agesa/family10/amdfam10.h @@ -0,0 +1,101 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef AMDFAM10_H +#define AMDFAM10_H + +#include <cpu/x86/msr.h> + +#define HWCR_MSR 0xC0010015 +#define NB_CFG_MSR 0xC001001f +#define LS_CFG_MSR 0xC0011020 +#define IC_CFG_MSR 0xC0011021 +#define DC_CFG_MSR 0xC0011022 +#define BU_CFG_MSR 0xC0011023 +#define BU_CFG2_MSR 0xC001102A + +#define CPU_ID_FEATURES_MSR 0xC0011004 +#define CPU_ID_EXT_FEATURES_MSR 0xC0011005 + +/* Definitions of various FAM10 registers */ +/* Function 0 */ +#define HT_TRANSACTION_CONTROL 0x68 +#define HTTC_DIS_RD_B_P (1 << 0) +#define HTTC_DIS_RD_DW_P (1 << 1) +#define HTTC_DIS_WR_B_P (1 << 2) +#define HTTC_DIS_WR_DW_P (1 << 3) +#define HTTC_DIS_MTS (1 << 4) +#define HTTC_CPU1_EN (1 << 5) +#define HTTC_CPU_REQ_PASS_PW (1 << 6) +#define HTTC_CPU_RD_RSP_PASS_PW (1 << 7) +#define HTTC_DIS_P_MEM_C (1 << 8) +#define HTTC_DIS_RMT_MEM_C (1 << 9) +#define HTTC_DIS_FILL_P (1 << 10) +#define HTTC_RSP_PASS_PW (1 << 11) +#define HTTC_BUF_REL_PRI_SHIFT 13 +#define HTTC_BUF_REL_PRI_MASK 3 +#define HTTC_BUF_REL_PRI_64 0 +#define HTTC_BUF_REL_PRI_16 1 +#define HTTC_BUF_REL_PRI_8 2 +#define HTTC_BUF_REL_PRI_2 3 +#define HTTC_LIMIT_CLDT_CFG (1 << 15) +#define HTTC_LINT_EN (1 << 16) +#define HTTC_APIC_EXT_BRD_CST (1 << 17) +#define HTTC_APIC_EXT_ID (1 << 18) +#define HTTC_APIC_EXT_SPUR (1 << 19) +#define HTTC_SEQ_ID_SRC_NODE_EN (1 << 20) +#define HTTC_DS_NP_REQ_LIMIT_SHIFT 21 +#define HTTC_DS_NP_REQ_LIMIT_MASK 3 +#define HTTC_DS_NP_REQ_LIMIT_NONE 0 +#define HTTC_DS_NP_REQ_LIMIT_1 1 +#define HTTC_DS_NP_REQ_LIMIT_4 2 +#define HTTC_DS_NP_REQ_LIMIT_8 3 + +/* Function 1 */ + +/* Function 2 */ + +/* Function 3 */ + + +/* Function 5 for FBDIMM */ +#define LinkConnected (1 << 0) +#define InitComplete (1 << 1) +#define NonCoherent (1 << 2) +#define ConnectionPending (1 << 4) + +#if CONFIG_MAX_PHYSICAL_CPUS > 8 + #if CONFIG_MAX_PHYSICAL_CPUS > 32 + #define NODE_NUMS 64 + #else + #define NODE_NUMS 32 + #endif +#else + #define NODE_NUMS 8 +#endif + +#ifdef __PRE_RAM__ +#if NODE_NUMS==64 + #define NODE_PCI(x, fn) ((x<32)?(PCI_DEV(CONFIG_CBB,(CONFIG_CDB+x),fn)):(PCI_DEV((CONFIG_CBB-1),(CONFIG_CDB+x-32),fn))) +#else + #define NODE_PCI(x, fn) PCI_DEV(CONFIG_CBB,(CONFIG_CDB+x),fn) +#endif +#endif + +#endif /* AMDFAM10_H */ diff --git a/src/northbridge/amd/agesa/family10/bootblock.c b/src/northbridge/amd/agesa/family10/bootblock.c new file mode 100755 index 0000000..f6ae8be --- /dev/null +++ b/src/northbridge/amd/agesa/family10/bootblock.c @@ -0,0 +1,29 @@ +/* + ***************************************************************************** + * + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * *************************************************************************** + * + */ + +#include <arch/io.h> +#include <arch/romcc_io.h> +#include <device/pci_def.h> + +static void bootblock_northbridge_init(void) { +} diff --git a/src/northbridge/amd/agesa/family10/chip.h b/src/northbridge/amd/agesa/family10/chip.h new file mode 100755 index 0000000..c0ac56e --- /dev/null +++ b/src/northbridge/amd/agesa/family10/chip.h @@ -0,0 +1,24 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +struct northbridge_amd_agesa_family10_config +{ +}; + +extern struct chip_operations northbridge_amd_agesa_family10_ops; diff --git a/src/northbridge/amd/agesa/family10/northbridge.c b/src/northbridge/amd/agesa/family10/northbridge.c new file mode 100755 index 0000000..b3e4c63 --- /dev/null +++ b/src/northbridge/amd/agesa/family10/northbridge.c @@ -0,0 +1,1518 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <arch/io.h> +#include <stdint.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <device/hypertransport.h> +#include <stdlib.h> +#include <string.h> +#include <bitops.h> +#include <cpu/cpu.h> +#include <cpu/x86/lapic.h> + +#if CONFIG_LOGICAL_CPUS==1 +#include <pc80/mc146818rtc.h> +#endif + +#include <cpu/amd/amdfam10_sysconf.h> +#include <Porting.h> +#include <AGESA.h> +#include <Options.h> +#include "root_complex/chip.h" +#include "northbridge.h" +#include "amdfam10.h" +#include "chip.h" + +extern uint32_t agesawrapper_amdinitmid(void); + +typedef struct amdfam10_sysconf_t sys_info_conf_t; +typedef struct dram_base_mask { + u32 base; //[47:27] at [28:8] + u32 mask; //[47:27] at [28:8] and enable at bit 0 +} dram_base_mask_t; + + +struct amdfam10_sysconf_t sysconf; +static device_t __f0_dev[NODE_NUMS]; +static device_t __f1_dev[NODE_NUMS]; +static device_t __f2_dev[NODE_NUMS]; +static device_t __f4_dev[NODE_NUMS]; +static unsigned fx_devs = 0; + +#if (defined CONFIG_EXT_CONF_SUPPORT) && CONFIG_EXT_CONF_SUPPORT == 1 +#error CONFIG_EXT_CONF_SUPPORT == 1 not support anymore! +#endif + +static dram_base_mask_t get_dram_base_mask(u32 nodeid) +{ + device_t dev; + dram_base_mask_t d; + dev = __f1_dev[0]; + +#if CONFIG_EXT_CONF_SUPPORT == 1 + /* I will use ext space only for simple */ + pci_write_config32(dev, 0x110, nodeid | (1<<28)); // [47:27] at [28:8] + d.mask = pci_read_config32(dev, 0x114); // enable is bit 0 + pci_write_config32(dev, 0x110, nodeid | (0<<28)); + d.base = pci_read_config32(dev, 0x114) & 0x1fffff00; //[47:27] at [28:8]; +#else + u32 temp; + temp = pci_read_config32(dev, 0x44 + (nodeid << 3)); //[39:24] at [31:16] + d.mask = ((temp & 0xfff80000)>>(8+3)); // mask out DramMask [26:24] too + temp = pci_read_config32(dev, 0x144 + (nodeid <<3)) & 0xff; //[47:40] at [7:0] + d.mask |= temp<<21; + + temp = pci_read_config32(dev, 0x40 + (nodeid << 3)); //[39:24] at [31:16] + d.mask |= (temp & 1); // enable bit + + d.base = ((temp & 0xfff80000)>>(8+3)); // mask out DramBase [26:24) too + temp = pci_read_config32(dev, 0x140 + (nodeid <<3)) & 0xff; //[47:40] at [7:0] + d.base |= temp<<21; +#endif + return d; +} + +#if CONFIG_EXT_CONF_SUPPORT +static void set_addr_map_reg_4_6_in_one_node(u32 nodeid, u32 cfg_map_dest, + u32 busn_min, u32 busn_max, + u32 type) +{ + device_t dev; + u32 i; + u32 tempreg; + u32 index_min, index_max; + u32 dest_min, dest_max; + index_min = busn_min>>2; dest_min = busn_min - (index_min<<2); + index_max = busn_max>>2; dest_max = busn_max - (index_max<<2); + + // three case: index_min==index_max, index_min+1=index_max; index_min+1<index_max + dev = __f1_dev[nodeid]; + if (index_min== index_max) { + pci_write_config32(dev, 0x110, index_min | (type<<28)); + tempreg = pci_read_config32(dev, 0x114); + for (i=dest_min; i<=dest_max; i++) { + tempreg &= ~(0xff<<(i*8)); + tempreg |= (cfg_map_dest<<(i*8)); + } + pci_write_config32(dev, 0x110, index_min | (type<<28)); // do i need to write it again + pci_write_config32(dev, 0x114, tempreg); + } else if (index_min<index_max) { + pci_write_config32(dev, 0x110, index_min | (type<<28)); + tempreg = pci_read_config32(dev, 0x114); + for (i=dest_min; i<=3; i++) { + tempreg &= ~(0xff<<(i*8)); + tempreg |= (cfg_map_dest<<(i*8)); + } + pci_write_config32(dev, 0x110, index_min | (type<<28)); // do i need to write it again + pci_write_config32(dev, 0x114, tempreg); + + pci_write_config32(dev, 0x110, index_max | (type<<28)); + tempreg = pci_read_config32(dev, 0x114); + for (i=0; i<=dest_max; i++) { + tempreg &= ~(0xff<<(i*8)); + tempreg |= (cfg_map_dest<<(i*8)); + } + pci_write_config32(dev, 0x110, index_max | (type<<28)); // do i need to write it again + pci_write_config32(dev, 0x114, tempreg); + if ((index_max-index_min)>1) { + tempreg = 0; + for (i=0; i<=3; i++) { + tempreg &= ~(0xff<<(i*8)); + tempreg |= (cfg_map_dest<<(i*8)); + } + for (i=index_min+1; i<index_max;i++) { + pci_write_config32(dev, 0x110, i | (type<<28)); + pci_write_config32(dev, 0x114, tempreg); + } + } + } +} +#endif + +#if CONFIG_PCI_BUS_SEGN_BITS +static u32 check_segn(device_t dev, u32 segbusn, u32 nodes, + sys_info_conf_t *sysinfo) +{ + //check segbusn here, We need every node have the same segn + if ((segbusn & 0xff)>(0xe0-1)) {// use next segn + u32 segn = (segbusn >> 8) & 0x0f; + segn++; + segbusn = segn<<8; + } + if (segbusn>>8) { + u32 val; + val = pci_read_config32(dev, 0x160); + val &= ~(0xf<<25); + val |= (segbusn & 0xf00)<<(25-8); + pci_write_config32(dev, 0x160, val); + } + + return segbusn; +} +#endif + +static u32 get_io_addr_index(u32 nodeid, u32 linkn) +{ + u32 index; + + for (index=0; index<256; index++) { + if ((sysconf.conf_io_addrx[index+4] == 0)) { + sysconf.conf_io_addr[index+4] = (nodeid & 0x3f) ; + sysconf.conf_io_addrx[index+4] = 1 | ((linkn & 0x7)<<4); + return index; + } + } + + return 0; + +} + +static u32 get_mmio_addr_index(u32 nodeid, u32 linkn) +{ + u32 index; + + for (index=0; index<64; index++) { + if ((sysconf.conf_mmio_addrx[index+8] == 0)) { + sysconf.conf_mmio_addr[index+8] = (nodeid & 0x3f) ; + sysconf.conf_mmio_addrx[index+8] = 1 | ((linkn & 0x7)<<4); + return index; + } + } + + return 0; +} + +static void store_conf_io_addr(u32 nodeid, u32 linkn, u32 reg, u32 index, + u32 io_min, u32 io_max) +{ + u32 val; +#if CONFIG_EXT_CONF_SUPPORT + if (reg!=0x110) { +#endif + /* io range allocation */ + index = (reg-0xc0)>>3; +#if CONFIG_EXT_CONF_SUPPORT + } else { + index+=4; + } +#endif + + val = (nodeid & 0x3f); // 6 bits used + sysconf.conf_io_addr[index] = val | ((io_max<<8) & 0xfffff000); //limit : with nodeid + val = 3 | ((linkn & 0x7)<<4) ; // 8 bits used + sysconf.conf_io_addrx[index] = val | ((io_min<<8) & 0xfffff000); // base : with enable bit + + if (sysconf.io_addr_num<(index+1)) + sysconf.io_addr_num = index+1; +} + +static void store_conf_mmio_addr(u32 nodeid, u32 linkn, u32 reg, u32 index, + u32 mmio_min, u32 mmio_max) +{ + u32 val; +#if CONFIG_EXT_CONF_SUPPORT + if (reg!=0x110) { +#endif + /* io range allocation */ + index = (reg-0x80)>>3; +#if CONFIG_EXT_CONF_SUPPORT + } else { + index += 8; + } +#endif + + val = (nodeid & 0x3f) ; // 6 bits used + sysconf.conf_mmio_addr[index] = val | (mmio_max & 0xffffff00); //limit : with nodeid and linkn + val = 3 | ((linkn & 0x7)<<4) ; // 8 bits used + sysconf.conf_mmio_addrx[index] = val | (mmio_min & 0xffffff00); // base : with enable bit + + if (sysconf.mmio_addr_num<(index+1)) + sysconf.mmio_addr_num = index+1; +} + +static void set_io_addr_reg(device_t dev, u32 nodeid, u32 linkn, u32 reg, + u32 io_min, u32 io_max) +{ + + u32 i; + u32 tempreg; +#if CONFIG_EXT_CONF_SUPPORT + if (reg!=0x110) { +#endif + /* io range allocation */ + tempreg = (nodeid&0xf) | ((nodeid & 0x30)<<(8-4)) | (linkn<<4) | ((io_max&0xf0)<<(12-4)); //limit + for (i=0; i<sysconf.nodes; i++) + pci_write_config32(__f1_dev[i], reg+4, tempreg); + + tempreg = 3 /*| ( 3<<4)*/ | ((io_min&0xf0)<<(12-4)); //base :ISA and VGA ? +#if 0 + // FIXME: can we use VGA reg instead? + if (dev->link[link].bridge_ctrl & PCI_BRIDGE_CTL_VGA) { + printk(BIOS_SPEW, "%s, enabling legacy VGA IO forwarding for %s link %s\n", + __func__, dev_path(dev), link); + tempreg |= PCI_IO_BASE_VGA_EN; + } + if (dev->link[link].bridge_ctrl & PCI_BRIDGE_CTL_NO_ISA) { + tempreg |= PCI_IO_BASE_NO_ISA; + } +#endif + for (i=0; i<sysconf.nodes; i++) + pci_write_config32(__f1_dev[i], reg, tempreg); +#if CONFIG_EXT_CONF_SUPPORT + return; + } + + u32 cfg_map_dest; + u32 j; + // if ht_c_index > 3, We should use extend space + if (io_min>io_max) return; + // for nodeid at first + cfg_map_dest = (1<<7) | (1<<6) | (linkn<<0); + + set_addr_map_reg_4_6_in_one_node(nodeid, cfg_map_dest, io_min, io_max, 4); + + // all other nodes + cfg_map_dest = (1<<7) | (0<<6) | (nodeid<<0); + for (j = 0; j< sysconf.nodes; j++) { + if (j== nodeid) continue; + set_addr_map_reg_4_6_in_one_node(j,cfg_map_dest, io_min, io_max, 4); + } +#endif +} + +static void set_mmio_addr_reg(u32 nodeid, u32 linkn, u32 reg, u32 index, u32 mmio_min, u32 mmio_max, u32 nodes) +{ + + u32 i; + u32 tempreg; +#if CONFIG_EXT_CONF_SUPPORT + if (reg!=0x110) { +#endif + /* io range allocation */ + tempreg = (nodeid&0xf) | (linkn<<4) | (mmio_max&0xffffff00); //limit + for (i=0; i<nodes; i++) + pci_write_config32(__f1_dev[i], reg+4, tempreg); + tempreg = 3 | (nodeid & 0x30) | (mmio_min&0xffffff00); + for (i=0; i<sysconf.nodes; i++) + pci_write_config32(__f1_dev[i], reg, tempreg); +#if CONFIG_EXT_CONF_SUPPORT + return; + } + + device_t dev; + u32 j; + // if ht_c_index > 3, We should use extend space + // for nodeid at first + u32 enable; + + if (mmio_min>mmio_max) { + return; + } + + enable = 1; + dev = __f1_dev[nodeid]; + tempreg = ((mmio_min>>3) & 0x1fffff00)| (1<<6) | (linkn<<0); + pci_write_config32(dev, 0x110, index | (2<<28)); + pci_write_config32(dev, 0x114, tempreg); + + tempreg = ((mmio_max>>3) & 0x1fffff00) | enable; + pci_write_config32(dev, 0x110, index | (3<<28)); + pci_write_config32(dev, 0x114, tempreg); + + // all other nodes + tempreg = ((mmio_min>>3) & 0x1fffff00) | (0<<6) | (nodeid<<0); + for (j = 0; j< sysconf.nodes; j++) { + if (j== nodeid) continue; + dev = __f1_dev[j]; + pci_write_config32(dev, 0x110, index | (2<<28)); + pci_write_config32(dev, 0x114, tempreg); + } + + tempreg = ((mmio_max>>3) & 0x1fffff00) | enable; + for (j = 0; j< sysconf.nodes; j++) { + if(j==nodeid) continue; + dev = __f1_dev[j]; + pci_write_config32(dev, 0x110, index | (3<<28)); + pci_write_config32(dev, 0x114, tempreg); + } +#endif +} + +static device_t get_node_pci(u32 nodeid, u32 fn) +{ +#if NODE_NUMS == 64 + if (nodeid < 32) { + return dev_find_slot(CONFIG_CBB, PCI_DEVFN(CONFIG_CDB + nodeid, fn)); + } else { + return dev_find_slot(CONFIG_CBB-1, PCI_DEVFN(CONFIG_CDB + nodeid - 32, fn)); + } + +#else + return dev_find_slot(CONFIG_CBB, PCI_DEVFN(CONFIG_CDB + nodeid, fn)); +#endif +} + +static unsigned int read_nb_cfg_54(void) +{ + msr_t msr; + msr = rdmsr(NB_CFG_MSR); + return (( msr.hi >> (54-32)) & 1); +} + +static void get_fx_devs(void) +{ + int i; + for (i = 0; i < NODE_NUMS; i++) { + __f0_dev[i] = get_node_pci(i, 0); + __f1_dev[i] = get_node_pci(i, 1); + __f2_dev[i] = get_node_pci(i, 2); + __f4_dev[i] = get_node_pci(i, 4); + if (__f0_dev[i] != NULL && __f1_dev[i] != NULL) + fx_devs = i+1; + } + if (__f1_dev[0] == NULL || __f0_dev[0] == NULL || fx_devs == 0) { + die("Cannot find 0:0x18.[0|1]\n"); + } +} + +static u32 f1_read_config32(unsigned reg) +{ + if (fx_devs == 0) + get_fx_devs(); + return pci_read_config32(__f1_dev[0], reg); +} + +static void f1_write_config32(unsigned reg, u32 value) +{ + int i; + if (fx_devs == 0) + get_fx_devs(); + for(i = 0; i < fx_devs; i++) { + device_t dev; + dev = __f1_dev[i]; + if (dev && dev->enabled) { + pci_write_config32(dev, reg, value); + } + } +} + +static u32 amdfam10_nodeid(device_t dev) +{ +#if NODE_NUMS == 64 + unsigned busn; + busn = dev->bus->secondary; + if (busn != CONFIG_CBB) { + return (dev->path.pci.devfn >> 3) - CONFIG_CDB + 32; + } else { + return (dev->path.pci.devfn >> 3) - CONFIG_CDB; + } + +#else + return (dev->path.pci.devfn >> 3) - CONFIG_CDB; +#endif +} + +static void set_vga_enable_reg(u32 nodeid, u32 linkn) +{ + u32 val; + + val = 1 | (nodeid<<4) | (linkn<<12); + /* it will routing (1)mmio 0xa0000:0xbffff (2) io 0x3b0:0x3bb, + 0x3c0:0x3df */ + f1_write_config32(0xf4, val); + +} + +static int reg_useable(unsigned reg, device_t goal_dev, unsigned goal_nodeid, + unsigned goal_link) +{ + struct resource *res; + unsigned nodeid, link = 0; + int result; + res = 0; + for (nodeid = 0; !res && (nodeid < fx_devs); nodeid++) { + device_t dev; + dev = __f0_dev[nodeid]; + if (!dev) + continue; + for (link = 0; !res && (link < 8); link++) { + res = probe_resource(dev, IOINDEX(0x1000 + reg, link)); + } + } + result = 2; + if (res) { + result = 0; + if ( (goal_link == (link - 1)) && + (goal_nodeid == (nodeid - 1)) && + (res->flags <= 1)) { + result = 1; + } + } + return result; +} + +static struct resource *amdfam10_find_iopair(device_t dev, unsigned nodeid, unsigned link) +{ + struct resource *resource; + u32 free_reg, reg; + resource = 0; + free_reg = 0; + + for (reg = 0xc0; reg <= 0xd8; reg += 0x8) { + int result; + result = reg_useable(reg, dev, nodeid, link); + if (result == 1) { + /* I have been allocated this one */ + break; + } + else if (result > 1) { + /* I have a free register pair */ + free_reg = reg; + } + } + if (reg > 0xd8) { + reg = free_reg; // if no free, the free_reg still be 0 + } + + //Ext conf space + if(!reg) { + //because of Extend conf space, we will never run out of reg, but we need one index to differ them. so same node and same link can have multi range + u32 index = get_io_addr_index(nodeid, link); + reg = 0x110+ (index<<24) + (4<<20); // index could be 0, 255 + } + + resource = new_resource(dev, IOINDEX(0x1000 + reg, link)); + + return resource; +} + +static struct resource *amdfam10_find_mempair(device_t dev, u32 nodeid, u32 link) +{ + struct resource *resource; + u32 free_reg, reg; + resource = 0; + free_reg = 0; + + for (reg = 0x80; reg <= 0xb8; reg += 0x8) { + int result; + result = reg_useable(reg, dev, nodeid, link); + if (result == 1) { + /* I have been allocated this one */ + break; + } + else if (result > 1) { + /* I have a free register pair */ + free_reg = reg; + } + } + if (reg > 0xb8) { + reg = free_reg; + } + + //Ext conf space + if (!reg) { + //because of Extend conf space, we will never run out of reg, + // but we need one index to differ them. so same node and + // same link can have multi range + u32 index = get_mmio_addr_index(nodeid, link); + reg = 0x110+ (index<<24) + (6<<20); // index could be 0, 63 + + } + resource = new_resource(dev, IOINDEX(0x1000 + reg, link)); + return resource; +} + +static void amdfam10_link_read_bases(device_t dev, u32 nodeid, u32 link) +{ + struct resource *resource; + + /* Initialize the io space constraints on the current bus */ + resource = amdfam10_find_iopair(dev, nodeid, link); + if (resource) { + u32 align; +#if CONFIG_EXT_CONF_SUPPORT == 1 + if((resource->index & 0x1fff) == 0x1110) { // ext + align = 8; + } + else +#endif + align = log2(HT_IO_HOST_ALIGN); + resource->base = 0; + resource->size = 0; + resource->align = align; + resource->gran = align; + resource->limit = 0xffffUL; + resource->flags = IORESOURCE_IO | IORESOURCE_BRIDGE; + } + + /* Initialize the prefetchable memory constraints on the current bus */ + resource = amdfam10_find_mempair(dev, nodeid, link); + if (resource) { + resource->base = 0; + resource->size = 0; + resource->align = log2(HT_MEM_HOST_ALIGN); + resource->gran = log2(HT_MEM_HOST_ALIGN); + resource->limit = 0xffffffffffULL; + resource->flags = IORESOURCE_MEM | IORESOURCE_PREFETCH; + resource->flags |= IORESOURCE_BRIDGE; + +#if CONFIG_EXT_CONF_SUPPORT == 1 + if ((resource->index & 0x1fff) == 0x1110) { // ext + normalize_resource(resource); + } +#endif + + } + + /* Initialize the memory constraints on the current bus */ + resource = amdfam10_find_mempair(dev, nodeid, link); + if (resource) { + resource->base = 0; + resource->size = 0; + resource->align = log2(HT_MEM_HOST_ALIGN); + resource->gran = log2(HT_MEM_HOST_ALIGN); + resource->limit = 0xffffffffffULL; + resource->flags = IORESOURCE_MEM | IORESOURCE_BRIDGE; +#if CONFIG_EXT_CONF_SUPPORT == 1 + if ((resource->index & 0x1fff) == 0x1110) { // ext + normalize_resource(resource); + } +#endif + } +} + +static void amdfam10_read_resources(device_t dev) +{ + u32 nodeid; + struct bus *link; + nodeid = amdfam10_nodeid(dev); + for (link = dev->link_list; link; link = link->next) { + if (link->children) { + amdfam10_link_read_bases(dev, nodeid, link->link_num); + } + } +} + +static void amdfam10_set_resource(device_t dev, struct resource *resource, + u32 nodeid) +{ + resource_t rbase, rend; + unsigned reg, link_num; + char buf[50]; + + /* Make certain the resource has actually been set */ + if (!(resource->flags & IORESOURCE_ASSIGNED)) { + return; + } + + /* If I have already stored this resource don't worry about it */ + if (resource->flags & IORESOURCE_STORED) { + return; + } + + /* Only handle PCI memory and IO resources */ + if (!(resource->flags & (IORESOURCE_MEM | IORESOURCE_IO))) + return; + + /* Ensure I am actually looking at a resource of function 1 */ + if ((resource->index & 0xffff) < 0x1000) { + return; + } + /* Get the base address */ + rbase = resource->base; + + /* Get the limit (rounded up) */ + rend = resource_end(resource); + + /* Get the register and link */ + reg = resource->index & 0xfff; // 4k + link_num = IOINDEX_LINK(resource->index); + + if (resource->flags & IORESOURCE_IO) { + + set_io_addr_reg(dev, nodeid, link_num, reg, rbase>>8, rend>>8); + store_conf_io_addr(nodeid, link_num, reg, (resource->index >> 24), rbase>>8, rend>>8); + } + else if (resource->flags & IORESOURCE_MEM) { + set_mmio_addr_reg(nodeid, link_num, reg, (resource->index >>24), rbase>>8, rend>>8, sysconf.nodes) ;// [39:8] + store_conf_mmio_addr(nodeid, link_num, reg, (resource->index >>24), rbase>>8, rend>>8); + } + resource->flags |= IORESOURCE_STORED; + sprintf(buf, " <node %x link %x>", + nodeid, link_num); + report_resource_stored(dev, resource, buf); +} + +/** + * I tried to reuse the resource allocation code in amdfam10_set_resource() + * but it is too difficult to deal with the resource allocation magic. + */ + +static void amdfam10_create_vga_resource(device_t dev, unsigned nodeid) +{ + struct bus *link; + + /* find out which link the VGA card is connected, + * we only deal with the 'first' vga card */ + for (link = dev->link_list; link; link = link->next) { + if (link->bridge_ctrl & PCI_BRIDGE_CTL_VGA) { +#if CONFIG_MULTIPLE_VGA_ADAPTERS == 1 + extern device_t vga_pri; // the primary vga device, defined in device.c + printk(BIOS_DEBUG, "VGA: vga_pri bus num = %d bus range [%d,%d]\n", vga_pri->bus->secondary, + link->secondary,link->subordinate); + /* We need to make sure the vga_pri is under the link */ + if((vga_pri->bus->secondary >= link->secondary ) && + (vga_pri->bus->secondary <= link->subordinate ) + ) +#endif + break; + } + } + + /* no VGA card installed */ + if (link == NULL) + return; + + printk(BIOS_DEBUG, "VGA: %s (aka node %d) link %d has VGA device\n", dev_path(dev), nodeid, link->link_num); + set_vga_enable_reg(nodeid, link->link_num); +} + +static void amdfam10_set_resources(device_t dev) +{ + unsigned nodeid; + struct bus *bus; + struct resource *res; + + /* Find the nodeid */ + nodeid = amdfam10_nodeid(dev); + + amdfam10_create_vga_resource(dev, nodeid); + + /* Set each resource we have found */ + for (res = dev->resource_list; res; res = res->next) { + amdfam10_set_resource(dev, res, nodeid); + } + + for (bus = dev->link_list; bus; bus = bus->next) { + if (bus->children) { + assign_resources(bus); + } + } +} + +static void mcf0_control_init(struct device *dev) +{ +} + +static unsigned amdfam10_scan_chains(device_t dev, unsigned max) +{ + unsigned nodeid; + struct bus *link; + unsigned sblink = sysconf.sblk; + device_t io_hub = NULL; + u32 next_unitid = 0xff; + + nodeid = amdfam10_nodeid(dev); + if (nodeid == 0) { + for (link = dev->link_list; link; link = link->next) { + if (link->link_num == sblink) { /* devicetree put IO Hub on link_lsit[3] */ + io_hub = link->children; + if (!io_hub || !io_hub->enabled) { + die("I can't find the IO Hub, or IO Hub not enabled, please check the device tree.\n"); + } + /* Now that nothing is overlapping it is safe to scan the children. */ + max = pci_scan_bus(link, 0x00, ((next_unitid - 1) << 3) | 7, 0); + } + } + } + + return max; +} + +static struct device_operations northbridge_operations = { + .read_resources = amdfam10_read_resources, + .set_resources = amdfam10_set_resources, + .enable_resources = pci_dev_enable_resources, + .init = mcf0_control_init, + .scan_bus = amdfam10_scan_chains, + .enable = 0, + .ops_pci = 0, +}; + +static const struct pci_driver mcf0_driver __pci_driver = { + .ops = &northbridge_operations, + .vendor = PCI_VENDOR_ID_AMD, + .device = 0x1200, +}; + +struct chip_operations northbridge_amd_agesa_family10_ops = { + CHIP_NAME("AMD FAM10 Northbridge") + .enable_dev = 0, +}; + + +static void amdfam10_domain_read_resources(device_t dev) +{ + unsigned reg; + + /* Find the already assigned resource pairs */ + get_fx_devs(); + for (reg = 0x80; reg <= 0xd8; reg+= 0x08) { + u32 base, limit; + base = f1_read_config32(reg); + limit = f1_read_config32(reg + 0x04); + /* Is this register allocated? */ + if ((base & 3) != 0) { + unsigned nodeid, reg_link; + device_t reg_dev; + if (reg<0xc0) { // mmio + nodeid = (limit & 0xf) + (base&0x30); + } else { // io + nodeid = (limit & 0xf) + ((base>>4)&0x30); + } + reg_link = (limit >> 4) & 7; + reg_dev = __f0_dev[nodeid]; + if (reg_dev) { + /* Reserve the resource */ + struct resource *res; + res = new_resource(reg_dev, IOINDEX(0x1000 + reg, reg_link)); + if (res) { + res->flags = 1; + } + } + } + } + /* FIXME: do we need to check extend conf space? + I don't believe that much preset value */ + +#if CONFIG_PCI_64BIT_PREF_MEM == 0 + pci_domain_read_resources(dev); +#else + struct bus *link; + struct resource *resource; + for (link=dev->link_list; link; link = link->next) { + /* Initialize the system wide io space constraints */ + resource = new_resource(dev, 0|(link->link_num<<2)); + resource->base = 0x400; + resource->limit = 0xffffUL; + resource->flags = IORESOURCE_IO; + + /* Initialize the system wide prefetchable memory resources constraints */ + resource = new_resource(dev, 1|(link->link_num<<2)); + resource->limit = 0xfcffffffffULL; + resource->flags = IORESOURCE_MEM | IORESOURCE_PREFETCH; + + /* Initialize the system wide memory resources constraints */ + resource = new_resource(dev, 2|(link->link_num<<2)); + resource->limit = 0xfcffffffffULL; + resource->flags = IORESOURCE_MEM; + } +#endif +} + +static void amdfam10_domain_enable_resources(device_t dev) +{ + u32 val; + /* Must be called after PCI enumeration and resource allocation */ + printk(BIOS_DEBUG, "\nFam10 - domain_enable_resources: AmdInitMid.\n"); + val = agesawrapper_amdinitmid(); + if (val) { + printk(BIOS_DEBUG, "agesawrapper_amdinitmid failed: %x \n", val); + } + printk(BIOS_DEBUG, " ader - leaving domain_enable_resources.\n"); +} + + +static u32 my_find_pci_tolm(struct bus *bus, u32 tolm) +{ + struct resource *min; + min = 0; + search_bus_resources(bus, IORESOURCE_MEM, IORESOURCE_MEM, tolm_test, &min); + if (min && tolm > min->base) { + tolm = min->base; + } + return tolm; +} + +#if CONFIG_HW_MEM_HOLE_SIZEK != 0 +struct hw_mem_hole_info { + unsigned hole_startk; + int node_id; +}; + +static struct hw_mem_hole_info get_hw_mem_hole_info(void) +{ + struct hw_mem_hole_info mem_hole; + int i; + + mem_hole.hole_startk = CONFIG_HW_MEM_HOLE_SIZEK; + mem_hole.node_id = -1; + + for (i = 0; i < sysconf.nodes; i++) { + dram_base_mask_t d; + u32 hole; + d = get_dram_base_mask(i); + if (!(d.mask & 1)) continue; // no memory on this node + + hole = pci_read_config32(__f1_dev[i], 0xf0); + if (hole & 1) { // we find the hole + mem_hole.hole_startk = (hole & (0xff<<24)) >> 10; + mem_hole.node_id = i; // record the node No with hole + break; // only one hole + } + } + + //We need to double check if there is speical set on base reg and limit reg are not continous instead of hole, it will find out it's hole_startk + if (mem_hole.node_id == -1) { + resource_t limitk_pri = 0; + for (i=0; i<sysconf.nodes; i++) { + dram_base_mask_t d; + resource_t base_k, limit_k; + d = get_dram_base_mask(i); + if (!(d.base & 1)) continue; + + base_k = ((resource_t)(d.base & 0x1fffff00)) <<9; + if (base_k > 4 *1024 * 1024) break; // don't need to go to check + if (limitk_pri != base_k) { // we find the hole + mem_hole.hole_startk = (unsigned)limitk_pri; // must beblow 4G + mem_hole.node_id = i; + break; //only one hole + } + + limit_k = ((resource_t)((d.mask + 0x00000100) & 0x1fffff00)) << 9; + limitk_pri = limit_k; + } + } + return mem_hole; +} +#endif + +#if CONFIG_WRITE_HIGH_TABLES==1 +#define HIGH_TABLES_SIZE 64 // maximum size of high tables in KB +extern uint64_t high_tables_base, high_tables_size; +#endif + +#if CONFIG_GFXUMA == 1 +extern uint64_t uma_memory_base, uma_memory_size; + +static void add_uma_resource(struct device *dev, int index) +{ + struct resource *resource; + + printk(BIOS_DEBUG, "Adding UMA memory area\n"); + resource = new_resource(dev, index); + resource->base = (resource_t) uma_memory_base; + resource->size = (resource_t) uma_memory_size; + resource->flags = IORESOURCE_MEM | IORESOURCE_RESERVE | + IORESOURCE_FIXED | IORESOURCE_STORED | IORESOURCE_ASSIGNED; +} +#endif + +static void amdfam10_domain_set_resources(device_t dev) +{ +#if CONFIG_PCI_64BIT_PREF_MEM == 1 + struct resource *io, *mem1, *mem2; + struct resource *res; +#endif + unsigned long mmio_basek; + u32 pci_tolm; + int i, idx; + struct bus *link; +#if CONFIG_HW_MEM_HOLE_SIZEK != 0 + struct hw_mem_hole_info mem_hole; + u32 reset_memhole = 1; +#endif + +#if CONFIG_PCI_64BIT_PREF_MEM == 1 + + for (link = dev->link_list; link; link = link->next) { + /* Now reallocate the pci resources memory with the + * highest addresses I can manage. + */ + mem1 = find_resource(dev, 1|(link->link_num<<2)); + mem2 = find_resource(dev, 2|(link->link_num<<2)); + + printk(BIOS_DEBUG, "base1: 0x%08Lx limit1: 0x%08Lx size: 0x%08Lx align: %d\n", + mem1->base, mem1->limit, mem1->size, mem1->align); + printk(BIOS_DEBUG, "base2: 0x%08Lx limit2: 0x%08Lx size: 0x%08Lx align: %d\n", + mem2->base, mem2->limit, mem2->size, mem2->align); + + /* See if both resources have roughly the same limits */ + if (((mem1->limit <= 0xffffffff) && (mem2->limit <= 0xffffffff)) || + ((mem1->limit > 0xffffffff) && (mem2->limit > 0xffffffff))) + { + /* If so place the one with the most stringent alignment first + */ + if (mem2->align > mem1->align) { + struct resource *tmp; + tmp = mem1; + mem1 = mem2; + mem2 = tmp; + } + /* Now place the memory as high up as it will go */ + mem2->base = resource_max(mem2); + mem1->limit = mem2->base - 1; + mem1->base = resource_max(mem1); + } + else { + /* Place the resources as high up as they will go */ + mem2->base = resource_max(mem2); + mem1->base = resource_max(mem1); + } + + printk(BIOS_DEBUG, "base1: 0x%08Lx limit1: 0x%08Lx size: 0x%08Lx align: %d\n", + mem1->base, mem1->limit, mem1->size, mem1->align); + printk(BIOS_DEBUG, "base2: 0x%08Lx limit2: 0x%08Lx size: 0x%08Lx align: %d\n", + mem2->base, mem2->limit, mem2->size, mem2->align); + } + + for (res = &dev->resource_list; res; res = res->next) + { + res->flags |= IORESOURCE_ASSIGNED; + res->flags |= IORESOURCE_STORED; + report_resource_stored(dev, res, ""); + } +#endif + + pci_tolm = 0xffffffffUL; + for (link = dev->link_list; link; link = link->next) { + pci_tolm = my_find_pci_tolm(link, pci_tolm); + } + + // FIXME handle interleaved nodes. If you fix this here, please fix + // amdk8, too. + mmio_basek = pci_tolm >> 10; + /* Round mmio_basek to something the processor can support */ + mmio_basek &= ~((1 << 6) -1); + + // FIXME improve mtrr.c so we don't use up all of the mtrrs with a 64M + // MMIO hole. If you fix this here, please fix amdk8, too. + /* Round the mmio hole to 64M */ + mmio_basek &= ~((64*1024) - 1); + +#if CONFIG_HW_MEM_HOLE_SIZEK != 0 +/* if the hw mem hole is already set in raminit stage, here we will compare + * mmio_basek and hole_basek. if mmio_basek is bigger that hole_basek and will + * use hole_basek as mmio_basek and we don't need to reset hole. + * otherwise We reset the hole to the mmio_basek + */ + + mem_hole = get_hw_mem_hole_info(); + + // Use hole_basek as mmio_basek, and we don't need to reset hole anymore + if ((mem_hole.node_id != -1) && (mmio_basek > mem_hole.hole_startk)) { + mmio_basek = mem_hole.hole_startk; + reset_memhole = 0; + } + +#endif + + idx = 0x10; + for (i = 0; i < sysconf.nodes; i++) { + dram_base_mask_t d; + resource_t basek, limitk, sizek; // 4 1T + d = get_dram_base_mask(i); + + if (!(d.mask & 1)) continue; + basek = ((resource_t)(d.base & 0x1fffff00)) << 9; // could overflow, we may lost 6 bit here + limitk = ((resource_t)((d.mask + 0x00000100) & 0x1fffff00)) << 9 ; + sizek = limitk - basek; + + /* see if we need a hole from 0xa0000 to 0xbffff */ + if ((basek < ((8*64)+(8*16))) && (sizek > ((8*64)+(16*16)))) { + ram_resource(dev, (idx | i), basek, ((8*64)+(8*16)) - basek); + idx += 0x10; + basek = (8*64)+(16*16); + sizek = limitk - ((8*64)+(16*16)); + + } + + //printk(BIOS_DEBUG, "node %d : mmio_basek=%08lx, basek=%08llx, limitk=%08llx\n", i, mmio_basek, basek, limitk); + + /* split the region to accomodate pci memory space */ + if ((basek < 4*1024*1024 ) && (limitk > mmio_basek)) { + if (basek <= mmio_basek) { + unsigned pre_sizek; + pre_sizek = mmio_basek - basek; + if (pre_sizek>0) { + ram_resource(dev, (idx | i), basek, pre_sizek); + idx += 0x10; + sizek -= pre_sizek; +#if CONFIG_WRITE_HIGH_TABLES==1 + if (high_tables_base==0) { + /* Leave some space for ACPI, PIRQ and MP tables */ +#if CONFIG_GFXUMA == 1 + high_tables_base = uma_memory_base - (HIGH_TABLES_SIZE * 1024); +#else + high_tables_base = (mmio_basek - HIGH_TABLES_SIZE) * 1024; +#endif + high_tables_size = HIGH_TABLES_SIZE * 1024; + printk(BIOS_DEBUG, " split: %dK table at =%08llx\n", HIGH_TABLES_SIZE, + high_tables_base); + } +#endif + } + basek = mmio_basek; + } + if ((basek + sizek) <= 4*1024*1024) { + sizek = 0; + } + else { + basek = 4*1024*1024; + sizek -= (4*1024*1024 - mmio_basek); + } + } + +#if CONFIG_GFXUMA == 1 + /* Deduct uma memory before reporting because + * this is what the mtrr code expects */ + sizek -= uma_memory_size / 1024; +#endif + ram_resource(dev, (idx | i), basek, sizek); + idx += 0x10; +#if CONFIG_WRITE_HIGH_TABLES==1 + printk(BIOS_DEBUG, "node %d: mmio_basek=%08lx, basek=%08llx, limitk=%08llx\n", + i, mmio_basek, basek, limitk); + if (high_tables_base==0) { + /* Leave some space for ACPI, PIRQ and MP tables */ +#if CONFIG_GFXUMA == 1 + high_tables_base = uma_memory_base - (HIGH_TABLES_SIZE * 1024); +#else + high_tables_base = (limitk - HIGH_TABLES_SIZE) * 1024; +#endif + high_tables_size = HIGH_TABLES_SIZE * 1024; + } +#endif + } + +#if CONFIG_GFXUMA == 1 + add_uma_resource(dev, 7); +#endif + + for(link = dev->link_list; link; link = link->next) { + if (link->children) { + assign_resources(link); + } + } +} + +static u32 amdfam10_domain_scan_bus(device_t dev, u32 max) +{ + u32 reg; + int i; + struct bus *link; + /* Unmap all of the HT chains */ + for (reg = 0xe0; reg <= 0xec; reg += 4) { + f1_write_config32(reg, 0); + } +#if CONFIG_EXT_CONF_SUPPORT == 1 + // all nodes + for (i = 0; i< sysconf.nodes; i++) { + int index; + for(index = 0; index < 64; index++) { + pci_write_config32(__f1_dev[i], 0x110, index | (6<<28)); + pci_write_config32(__f1_dev[i], 0x114, 0); + } + + } +#endif + + + for (link = dev->link_list; link; link = link->next) { + max = pci_scan_bus(link, PCI_DEVFN(CONFIG_CDB, 0), 0xff, max); + } + + /* Tune the hypertransport transaction for best performance. + * Including enabling relaxed ordering if it is safe. + */ + get_fx_devs(); + for (i = 0; i < fx_devs; i++) { + device_t f0_dev; + f0_dev = __f0_dev[i]; + if (f0_dev && f0_dev->enabled) { + u32 httc; + httc = pci_read_config32(f0_dev, HT_TRANSACTION_CONTROL); + httc &= ~HTTC_RSP_PASS_PW; + if (!dev->link_list->disable_relaxed_ordering) { + httc |= HTTC_RSP_PASS_PW; + } + printk(BIOS_SPEW, "%s passpw: %s\n", + dev_path(dev), + (!dev->link_list->disable_relaxed_ordering)? + "enabled":"disabled"); + pci_write_config32(f0_dev, HT_TRANSACTION_CONTROL, httc); + } + } + return max; +} + + +static struct device_operations pci_domain_ops = { + .read_resources = amdfam10_domain_read_resources, + .set_resources = amdfam10_domain_set_resources, + .enable_resources = amdfam10_domain_enable_resources, + .init = NULL, + .scan_bus = amdfam10_domain_scan_bus, +#if CONFIG_MMCONF_SUPPORT_DEFAULT + .ops_pci_bus = &pci_ops_mmconf, +#else + .ops_pci_bus = &pci_cf8_conf1, +#endif +}; + + +static void sysconf_init(device_t dev) // first node +{ + sysconf.sblk = (pci_read_config32(dev, 0x64)>>8) & 7; // don't forget sublink1 + sysconf.segbit = 0; + sysconf.ht_c_num = 0; + + unsigned ht_c_index; + + for (ht_c_index=0; ht_c_index<32; ht_c_index++) { + sysconf.ht_c_conf_bus[ht_c_index] = 0; + } + + sysconf.nodes = ((pci_read_config32(dev, 0x60)>>4) & 7) + 1; //NodeCnt[2:0] + + /* Find the bootstrap processors apicid */ + sysconf.bsp_apicid = lapicid(); +} + +static void add_more_links(device_t dev, unsigned total_links) +{ + struct bus *link, *last = NULL; + int link_num; + + for (link = dev->link_list; link; link = link->next) + last = link; + + if (last) { + int links = total_links - last->link_num; + link_num = last->link_num; + if (links > 0) { + link = malloc(links*sizeof(*link)); + if (!link) + die("Couldn't allocate more links!\n"); + memset(link, 0, links*sizeof(*link)); + last->next = link; + } + } + else { + link_num = -1; + link = malloc(total_links*sizeof(*link)); + memset(link, 0, total_links*sizeof(*link)); + dev->link_list = link; + } + + for (link_num = link_num + 1; link_num < total_links; link_num++) { + link->link_num = link_num; + link->dev = dev; + link->next = link + 1; + last = link; + link = link->next; + } + last->next = NULL; +} + +/* dummy read_resources */ +static void lapic_read_resources(device_t dev) +{ +} + +static struct device_operations lapic_ops = { + .read_resources = lapic_read_resources, + .set_resources = pci_dev_set_resources, + .enable_resources = pci_dev_enable_resources, + .init = 0, + .scan_bus = 0, + .enable = 0, + .ops_pci = 0, +}; + +static u32 cpu_bus_scan(device_t dev, u32 max) +{ + struct bus *cpu_bus; + device_t dev_mc; +#if CONFIG_CBB + device_t pci_domain; +#endif + int i,j; + int nodes; + unsigned nb_cfg_54; + unsigned siblings; + int cores_found; + int disable_siblings; + unsigned ApicIdCoreIdSize; + + nb_cfg_54 = 0; + ApicIdCoreIdSize = (cpuid_ecx(0x80000008)>>12 & 0xf); + if (ApicIdCoreIdSize) { + siblings = (1<<ApicIdCoreIdSize)-1; + } else { + siblings = 3; //quad core + } + + disable_siblings = !CONFIG_LOGICAL_CPUS; +#if CONFIG_LOGICAL_CPUS == 1 + get_option(&disable_siblings, "multi_core"); +#endif + + // How can I get the nb_cfg_54 of every node's nb_cfg_54 in bsp??? + nb_cfg_54 = read_nb_cfg_54(); + +#if CONFIG_CBB + dev_mc = dev_find_slot(0, PCI_DEVFN(CONFIG_CDB, 0)); //0x00 + if (dev_mc && dev_mc->bus) { + printk(BIOS_DEBUG, "%s found", dev_path(dev_mc)); + pci_domain = dev_mc->bus->dev; + if (pci_domain && (pci_domain->path.type == DEVICE_PATH_PCI_DOMAIN)) { + printk(BIOS_DEBUG, "\n%s move to ",dev_path(dev_mc)); + dev_mc->bus->secondary = CONFIG_CBB; // move to 0xff + printk(BIOS_DEBUG, "%s",dev_path(dev_mc)); + + } else { + printk(BIOS_DEBUG, " but it is not under pci_domain directly "); + } + printk(BIOS_DEBUG, "\n"); + } + dev_mc = dev_find_slot(CONFIG_CBB, PCI_DEVFN(CONFIG_CDB, 0)); + if (!dev_mc) { + dev_mc = dev_find_slot(0, PCI_DEVFN(0x18, 0)); + if (dev_mc && dev_mc->bus) { + printk(BIOS_DEBUG, "%s found\n", dev_path(dev_mc)); + pci_domain = dev_mc->bus->dev; + if (pci_domain && (pci_domain->path.type == DEVICE_PATH_PCI_DOMAIN)) { + if ((pci_domain->link_list) && (pci_domain->link_list->children == dev_mc)) { + printk(BIOS_DEBUG, "%s move to ",dev_path(dev_mc)); + dev_mc->bus->secondary = CONFIG_CBB; // move to 0xff + printk(BIOS_DEBUG, "%s\n",dev_path(dev_mc)); + while (dev_mc) { + printk(BIOS_DEBUG, "%s move to ",dev_path(dev_mc)); + dev_mc->path.pci.devfn -= PCI_DEVFN(0x18,0); + printk(BIOS_DEBUG, "%s\n",dev_path(dev_mc)); + dev_mc = dev_mc->sibling; + } + } + } + } + } + +#endif + + dev_mc = dev_find_slot(CONFIG_CBB, PCI_DEVFN(CONFIG_CDB, 0)); + if (!dev_mc) { + printk(BIOS_ERR, "%02x:%02x.0 not found", CONFIG_CBB, CONFIG_CDB); + die(""); + } + + sysconf_init(dev_mc); + + nodes = sysconf.nodes; + +#if CONFIG_CBB && (NODE_NUMS > 32) + if (nodes>32) { // need to put node 32 to node 63 to bus 0xfe + if (pci_domain->link_list && !pci_domain->link_list->next) { + struct bus *new_link = new_link(pci_domain); + pci_domain->link_list->next = new_link; + new_link->link_num = 1; + new_link->dev = pci_domain; + new_link->children = 0; + printk(BIOS_DEBUG, "%s links now 2\n", dev_path(pci_domain)); + } + pci_domain->link_list->next->secondary = CONFIG_CBB - 1; + } +#endif + /* Find which cpus are present */ + cpu_bus = dev->link_list; + for (i = 0; i < nodes; i++) { + device_t cdb_dev, cpu; + struct device_path cpu_path; + unsigned busn, devn; + struct bus *pbus; + + busn = CONFIG_CBB; + devn = CONFIG_CDB+i; + pbus = dev_mc->bus; +#if CONFIG_CBB && (NODE_NUMS > 32) + if (i>=32) { + busn--; + devn-=32; + pbus = pci_domain->link_list->next); + } +#endif + + /* Find the cpu's pci device */ + cdb_dev = dev_find_slot(busn, PCI_DEVFN(devn, 0)); + if (!cdb_dev) { + /* If I am probing things in a weird order + * ensure all of the cpu's pci devices are found. + */ + int fn; + for(fn = 0; fn <= 5; fn++) { //FBDIMM? + cdb_dev = pci_probe_dev(NULL, pbus, + PCI_DEVFN(devn, fn)); + } + cdb_dev = dev_find_slot(busn, PCI_DEVFN(devn, 0)); + } + if (cdb_dev) { + /* Ok, We need to set the links for that device. + * otherwise the device under it will not be scanned + */ + int linknum; +#if CONFIG_HT3_SUPPORT==1 + linknum = 8; +#else + linknum = 4; +#endif + add_more_links(cdb_dev, linknum); + } + + cores_found = 0; // one core + cdb_dev = dev_find_slot(busn, PCI_DEVFN(devn, 3)); + if (cdb_dev && cdb_dev->enabled) { + j = pci_read_config32(cdb_dev, 0xe8); + cores_found = (j >> 12) & 3; // dev is func 3 + if (siblings > 3) + cores_found |= (j >> 13) & 4; + printk(BIOS_DEBUG, " %s siblings=%d\n", dev_path(cdb_dev), cores_found); + } + + u32 jj; + if (disable_siblings) { + jj = 0; + } else { + jj = cores_found; + } + + for (j = 0; j <=jj; j++ ) { + extern CONST OPTIONS_CONFIG_TOPOLOGY ROMDATA TopologyConfiguration; + u32 modules = TopologyConfiguration.PlatformNumberOfModules; + u32 lapicid_start = 0; + + /* Build the cpu device path */ + cpu_path.type = DEVICE_PATH_APIC; + /* + * APIC ID calucation is tightly coupled with AGESA v5 code. + * This calculation MUST match the assignment calculation done + * in LocalApicInitializationAtEarly() function. + * And reference GetLocalApicIdForCore() + * + * Apply apic enumeration rules + * For systems with >= 16 APICs, put the IO-APICs at 0..n and + * put the local-APICs at m..z + * For systems with < 16 APICs, put the Local-APICs at 0..n and + * put the IO-APICs at (n + 1)..z + */ + if (nodes * (cores_found + 1) >= 0x10) { + lapicid_start = 0x10; + } + cpu_path.apic.apic_id = (lapicid_start * (i/modules + 1)) + ((i % modules) ? (j + (cores_found + 1)) : j); + + /* See if I can find the cpu */ + cpu = find_dev_path(cpu_bus, &cpu_path); + + /* Enable the cpu if I have the processor */ + if (cdb_dev && cdb_dev->enabled) { + if (!cpu) { + cpu = alloc_dev(cpu_bus, &cpu_path); + } + if (cpu) { + cpu->enabled = 1; + } + } + + /* Disable the cpu if I don't have the processor */ + if (cpu && (!cdb_dev || !cdb_dev->enabled)) { + cpu->enabled = 0; + } + + /* Report what I have done */ + if (cpu) { + cpu->path.apic.node_id = i; + cpu->path.apic.core_id = j; + if (cpu->path.type == DEVICE_PATH_APIC) { + cpu->ops = &lapic_ops; + } + printk(BIOS_DEBUG, "CPU: %s %s\n", + dev_path(cpu), cpu->enabled?"enabled":"disabled"); + } + + } //j + } + return max; +} + +static void cpu_bus_init(device_t dev) +{ + initialize_cpus(dev->link_list); +} + +static void cpu_bus_noop(device_t dev) +{ +} + +static void cpu_bus_read_resources(device_t dev) +{ +#if CONFIG_MMCONF_SUPPORT + struct resource *resource = new_resource(dev, 0xc0010058); + resource->base = CONFIG_MMCONF_BASE_ADDRESS; + resource->size = CONFIG_MMCONF_BUS_NUMBER * 4096*256; + resource->flags = IORESOURCE_MEM | IORESOURCE_RESERVE | + IORESOURCE_FIXED | IORESOURCE_STORED | IORESOURCE_ASSIGNED; +#endif +} + +static void cpu_bus_set_resources(device_t dev) +{ + struct resource *resource = find_resource(dev, 0xc0010058); + if (resource) { + report_resource_stored(dev, resource, " <mmconfig>"); + } + pci_dev_set_resources(dev); +} + +static struct device_operations cpu_bus_ops = { + .read_resources = cpu_bus_read_resources, + .set_resources = cpu_bus_set_resources, + .enable_resources = cpu_bus_noop, + .init = cpu_bus_init, + .scan_bus = cpu_bus_scan, +}; + +static void root_complex_enable_dev(struct device *dev) +{ + /* Set the operations if it is a special bus type */ + if (dev->path.type == DEVICE_PATH_PCI_DOMAIN) { + dev->ops = &pci_domain_ops; + } + else if (dev->path.type == DEVICE_PATH_APIC_CLUSTER) { + dev->ops = &cpu_bus_ops; + } +} + +struct chip_operations northbridge_amd_agesa_family10_root_complex_ops = { + CHIP_NAME("AMD FAM10 Root Complex") + .enable_dev = root_complex_enable_dev, +}; + diff --git a/src/northbridge/amd/agesa/family10/northbridge.h b/src/northbridge/amd/agesa/family10/northbridge.h new file mode 100755 index 0000000..0530ee7 --- /dev/null +++ b/src/northbridge/amd/agesa/family10/northbridge.h @@ -0,0 +1,26 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef NORTHBRIDGE_AMD_AGESA_FAM10H_H +#define NORTHBRIDGE_AMD_AGESA_FAM10H_H + +static struct device_operations pci_domain_ops; +static struct device_operations cpu_bus_ops; + +#endif /* NORTHBRIDGE_AMD_AGESA_FAM10H_H */ diff --git a/src/northbridge/amd/agesa/family10/reset_test.h b/src/northbridge/amd/agesa/family10/reset_test.h new file mode 100755 index 0000000..5b24f2d --- /dev/null +++ b/src/northbridge/amd/agesa/family10/reset_test.h @@ -0,0 +1,52 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * copy from src/northbridge/amd/amdfam10/reset_test.c + */ + +#ifndef _RESET_TEST_H_ +#define _RESET_TEST_H_ + +#include "amdfam10.h" /* NODE_PCI */ + +#define NODE_ID 0x60 +#define HT_INIT_CONTROL 0x6c +#define HTIC_ColdR_Detect (1<<4) +#define HTIC_BIOSR_Detect (1<<5) +#define HTIC_INIT_Detect (1<<6) + +static inline u32 warm_reset_detect(u8 nodeid) +{ + u32 htic; + device_t device; + device = NODE_PCI(nodeid, 0); + htic = pci_io_read_config32(device, HT_INIT_CONTROL); + return (htic & HTIC_ColdR_Detect) && !(htic & HTIC_BIOSR_Detect); +} + +static inline void distinguish_cpu_resets(u8 nodeid) +{ + u32 htic; + device_t device; + device = NODE_PCI(nodeid, 0); + htic = pci_io_read_config32(device, HT_INIT_CONTROL); + htic |= HTIC_ColdR_Detect | HTIC_BIOSR_Detect | HTIC_INIT_Detect; + pci_io_write_config32(device, HT_INIT_CONTROL, htic); +} + +#endif diff --git a/src/northbridge/amd/agesa/family10/root_complex/Kconfig b/src/northbridge/amd/agesa/family10/root_complex/Kconfig new file mode 100755 index 0000000..345896b --- /dev/null +++ b/src/northbridge/amd/agesa/family10/root_complex/Kconfig @@ -0,0 +1,2 @@ +config NORTHBRIDGE_AMD_AGESA_FAMILY10_ROOT_COMPLEX + bool diff --git a/src/northbridge/amd/agesa/family10/root_complex/chip.h b/src/northbridge/amd/agesa/family10/root_complex/chip.h new file mode 100755 index 0000000..15a2e1a --- /dev/null +++ b/src/northbridge/amd/agesa/family10/root_complex/chip.h @@ -0,0 +1,24 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +struct northbridge_amd_agesa_family10_root_complex_config +{ +}; + +extern struct chip_operations northbridge_amd_agesa_family10_root_complex_ops; diff --git a/src/northbridge/amd/agesa/family10/ssdt.asl b/src/northbridge/amd/agesa/family10/ssdt.asl new file mode 100755 index 0000000..e637f1f --- /dev/null +++ b/src/northbridge/amd/agesa/family10/ssdt.asl @@ -0,0 +1,346 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* + * Make sure HC_NUMS and HC_POSSIBLE_NUM setting is consistent to this file + */ + +DefinitionBlock ("SSDT.aml", "SSDT", 1, "AMD-FAM15H", "AMD-ACPI", 0x1000) +{ + /* + * These objects were referenced but not defined in this table + */ + External (_SB_.PCI0, DeviceObj) + + Scope (_SB.PCI0) + { + Name (BUSN, Package (0x20) /* HC_NUMS */ + { + 0x11111111, + 0x22222222, + 0x33333333, + 0x44444444, + 0x55555555, + 0x66666666, + 0x77777777, + 0x88888888, + 0x99999999, + 0xaaaaaaaa, + 0xbbbbbbbb, + 0xcccccccc, + 0xdddddddd, + 0xeeeeeeee, + 0x10101010, + 0x11111111, + 0x12121212, + 0x13131313, + 0x14141414, + 0x15151515, + 0x11111111, + 0x22222222, + 0x33333333, + 0x44444444, + 0x55555555, + 0x66666666, + 0x77777777, + 0x88888888, + 0x99999999, + 0xaaaaaaaa, + 0xbbbbbbbb, + 0xcccccccc + }) + Name (MMIO, Package (0x80) /* HC_NUMS * 4 */ + { + 0x11111111, + 0x22222222, + 0x33333333, + 0x44444444, + 0x55555555, + 0x66666666, + 0x77777777, + 0x88888888, + 0x99999999, + 0xaaaaaaaa, + 0xbbbbbbbb, + 0xcccccccc, + 0xdddddddd, + 0xeeeeeeee, + 0x11111111, + 0x22222222, + 0x11111111, + 0x22222222, + 0x33333333, + 0x44444444, + 0x55555555, + 0x66666666, + 0x77777777, + 0x88888888, + 0x99999999, + 0xaaaaaaaa, + 0xbbbbbbbb, + 0xcccccccc, + 0xdddddddd, + 0xeeeeeeee, + 0x11111111, + 0x22222222, + 0x11111111, + 0x22222222, + 0x33333333, + 0x44444444, + 0x55555555, + 0x66666666, + 0x77777777, + 0x88888888, + 0x99999999, + 0xaaaaaaaa, + 0xbbbbbbbb, + 0xcccccccc, + 0xdddddddd, + 0xeeeeeeee, + 0x11111111, + 0x22222222, + 0x11111111, + 0x22222222, + 0x33333333, + 0x44444444, + 0x55555555, + 0x66666666, + 0x77777777, + 0x88888888, + 0x99999999, + 0xaaaaaaaa, + 0xbbbbbbbb, + 0xcccccccc, + 0xdddddddd, + 0xeeeeeeee, + 0x11111111, + 0x22222222, + 0x11111111, + 0x22222222, + 0x33333333, + 0x44444444, + 0x55555555, + 0x66666666, + 0x77777777, + 0x88888888, + 0x99999999, + 0xaaaaaaaa, + 0xbbbbbbbb, + 0xcccccccc, + 0xdddddddd, + 0xeeeeeeee, + 0x11111111, + 0x22222222, + 0x11111111, + 0x22222222, + 0x33333333, + 0x44444444, + 0x55555555, + 0x66666666, + 0x77777777, + 0x88888888, + 0x99999999, + 0xaaaaaaaa, + 0x11111111, + 0x22222222, + 0x33333333, + 0x44444444, + 0x55555555, + 0x66666666, + 0x77777777, + 0x88888888, + 0x99999999, + 0xaaaaaaaa, + 0x11111111, + 0x22222222, + 0x33333333, + 0x44444444, + 0x55555555, + 0x66666666, + 0x77777777, + 0x88888888, + 0x99999999, + 0xaaaaaaaa, + 0x11111111, + 0x22222222, + 0x33333333, + 0x44444444, + 0x55555555, + 0x66666666, + 0x77777777, + 0x88888888, + 0x99999999, + 0xaaaaaaaa, + 0x11111111, + 0x22222222, + 0x33333333, + 0x44444444, + 0x55555555, + 0x66666666, + 0x77777777, + 0x88888888 + }) + Name (PCIO, Package (0x40) /* HC_NUMS * 2 */ + { + 0x77777777, + 0x88888888, + 0x99999999, + 0xaaaaaaaa, + 0xbbbbbbbb, + 0xcccccccc, + 0xdddddddd, + 0xeeeeeeee, + 0x77777777, + 0x88888888, + 0x99999999, + 0xaaaaaaaa, + 0xbbbbbbbb, + 0xcccccccc, + 0xdddddddd, + 0xeeeeeeee, + 0x77777777, + 0x88888888, + 0x99999999, + 0xaaaaaaaa, + 0xbbbbbbbb, + 0xcccccccc, + 0xdddddddd, + 0xeeeeeeee, + 0x77777777, + 0x88888888, + 0x99999999, + 0xaaaaaaaa, + 0xbbbbbbbb, + 0xcccccccc, + 0xdddddddd, + 0xeeeeeeee, + 0xaaaaaaaa, + 0xbbbbbbbb, + 0xcccccccc, + 0xdddddddd, + 0xeeeeeeee, + 0x77777777, + 0x88888888, + 0x99999999, + 0x11111111, + 0x22222222, + 0x33333333, + 0x44444444, + 0x55555555, + 0x66666666, + 0x77777777, + 0x88888888, + 0x99999999, + 0xaaaaaaaa, + 0x11111111, + 0x22222222, + 0x33333333, + 0x44444444, + 0x55555555, + 0x66666666, + 0x77777777, + 0x88888888, + 0x99999999, + 0xaaaaaaaa, + 0x11111111, + 0x22222222, + 0x33333333, + 0x44444444 + }) + Name (SBLK, 0x11) + Name (TOM1, 0xaaaaaaaa) + Name (SBDN, 0xbbbbbbbb) + Name (HCLK, Package (0x20) /* HC_POSSIBLE_NUM */ + { + 0x11111111, + 0x22222222, + 0x33333333, + 0x44444444, + 0x55555555, + 0x66666666, + 0x77777777, + 0x88888888, + 0x11111111, + 0x22222222, + 0x33333333, + 0x44444444, + 0x55555555, + 0x66666666, + 0x77777777, + 0x88888888, + 0x11111111, + 0x22222222, + 0x33333333, + 0x44444444, + 0x55555555, + 0x66666666, + 0x77777777, + 0x88888888, + 0x11111111, + 0x22222222, + 0x33333333, + 0x44444444, + 0x55555555, + 0x66666666, + 0x77777777, + 0x88888888 + }) + Name (HCDN, Package (0x20) /* HC_POSSIBLE_NUM */ + { + 0x11111111, + 0x22222222, + 0x33333333, + 0x44444444, + 0x55555555, + 0x66666666, + 0x77777777, + 0x88888888, + 0x11111111, + 0x22222222, + 0x33333333, + 0x44444444, + 0x55555555, + 0x66666666, + 0x77777777, + 0x88888888, + 0x11111111, + 0x22222222, + 0x33333333, + 0x44444444, + 0x55555555, + 0x66666666, + 0x77777777, + 0x88888888, + 0x11111111, + 0x22222222, + 0x33333333, + 0x44444444, + 0x55555555, + 0x66666666, + 0x77777777, + 0x88888888 + }) + Name (CBB, 0x99) + Name (CBST, 0x88) + Name (CBB2, 0x77) + Name (CBS2, 0x66) + + } +} +