[coreboot] Coreboot can't boot to kernel.

[andery lin]

Dear Sir,

I do following procedure:
1.    Modify ../filo-0.4.2/Config
      change to AUTOBOOT_FILE = "hda1:/vmlinuz root=/dev/hda2
console=ttyS0,115200"
2.    make for [filo-0.4.2]
3.    vi ../coreboot-v2/targets/amd/dbm690t/Config.lb
4.    change to payload /usr/local/linuxbios/coreboot-v2/filo-0.4.2/filo.elf
5.    .. /targets/amd/dbm690t/dbm690t  make
6.    cat video.bios.bin coreboot.rom >> LinuxBios.rom
7.    inuxBios.rom  write to flash
8.    I had setup Fedora9 to my hard disk and in normal BIOS flash, it could
boot up.
      So, I change to Coreboot BIOS flash and then it could not boot up.
      I don't know why was show "file not found "

How to modify the "filo Config" ?
My fedora9 ==> /boot/grub/menu.lst
   root(hd0,0)
   kernel / vmlinuz-2.6.24-14.fc9.i686 ro
root=UUID=1fef4ac9-c286-4c63-a9f6-f27869d4328c rhgb quiet
   initrd /initrd-2.6.25-14.fc9.i686.img

So coreboot ../filo-0.4.2/Config
change to AUTOBOOT_FILE = "hda1:/vmlinuz root=/dev/hda2
console=ttyS0,115200"
or
change to AUTOBOOT_FILE = "hda0:/vmlinuz root=/dev/hda1
console=ttyS0,115200"
Is right? but it could not work.

Those are error message as attached pitcher.Thanks a lot.

Best Regards,
Andery