Adam Talbot wrote:
Console is working. Fully tested. Post card... There are no PCI/ISA slots on this board, all I have is 1 pc/104 slot and no jtag. The superIO is controled by a via vt1211. I think I have that part of my config correct. (see below) But I am not sure how to figure out the pnp address. -Adam
chip superio/via/vt1211 device pnp 2e.2 on # Com1 io 0x60 = 0x3f8 irq 0x70 = 4 end
Adam Talbot wrote:
as richard says:
main(){ iopl(3);
inb(0x2e);
/* and print that out, see if it is 0xff */ inb(0x4e); // or whatever
}
in other words, from a c program, just try to recreate what linuxbios does for I/o to superio, and see what works.
ron