Ron,
It turns out the problem was with not setting the LINUXBIOS CONFIG variable properly. Seems obvious now, wasn't earlier. I'm learning (slowly) how this fits together.
Craig
-----Original Message----- From: ron minnich [mailto:rminnich@lanl.gov] Sent: Wednesday, October 08, 2003 9:14 AM To: Craig C Forney Cc: YhLu@tyan.com; stepan@suse.de; linuxbios@clustermatic.org Subject: Re: Hdama + etherboot problems
the first and most useful thing to do is set MAXIMUM_CONSOLE_LOGLEVEL and DEFAULT_CONSOLE_LOGLEVEL to 10 in the target config.lb.
Then send the output again.
Also, since you modified raminit.c, I think you should try an unmodified version first.
The problem with raminit.c caused LinuxBIOS to stop during memory configuration. I posted a patch in a previous post that appears pretty safe, and seems to work fine.
ron