Stefan Reinauer (stefan.reinauer@coreboot.org) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/364
-gerrit
commit f3958db817a9b896da4a2ec2a4717d27b50946f9 Author: Stefan Reinauer reinauer@chromium.org Date: Mon Oct 31 12:56:45 2011 -0700
remove trailing whitespace
Change-Id: Ib91889a374515d36a2b12b53aeb12b6ea6e22732 Signed-off-by: Stefan Reinauer reinauer@google.com --- src/arch/x86/include/arch/romcc_io.h | 2 +- src/console/die.c | 2 +- src/console/post.c | 2 +- src/cpu/amd/model_10xxx/defaults.h | 2 +- src/cpu/amd/model_10xxx/fidvid.c | 64 ++++---- src/cpu/amd/model_fxx/model_fxx_init.c | 8 +- src/cpu/amd/model_gx2/cpubug.c | 2 +- src/cpu/amd/model_lx/cpureginit.c | 4 +- src/cpu/amd/model_lx/msrinit.c | 2 +- src/devices/oprom/x86.c | 4 +- src/devices/oprom/x86_asm.S | 2 +- src/drivers/ati/ragexl/xlinit.c | 2 +- src/drivers/dec/21143/21143.c | 2 +- src/drivers/oxford/oxpcie/oxpcie_early.c | 6 +- src/include/console/post_codes.h | 52 +++--- src/include/cpu/x86/cache.h | 2 +- src/include/cpu/x86/msr.h | 2 +- src/lib/uart8250mem.c | 4 +- src/lib/usbdebug.c | 6 +- src/mainboard/amd/inagua/BiosCallOuts.c | 52 +++--- src/mainboard/amd/inagua/BiosCallOuts.h | 4 +- src/mainboard/amd/inagua/PlatformGnbPcie.c | 18 +- src/mainboard/amd/inagua/PlatformGnbPcieComplex.h | 22 ++-- src/mainboard/amd/inagua/acpi_tables.c | 6 +- src/mainboard/amd/inagua/agesawrapper.c | 80 +++++----- src/mainboard/amd/inagua/agesawrapper.h | 10 +- src/mainboard/amd/inagua/buildOpts.c | 16 +- src/mainboard/amd/inagua/dimmSpd.c | 16 +- src/mainboard/amd/inagua/get_bus_conf.c | 18 +- src/mainboard/amd/inagua/mptable.c | 24 ++-- src/mainboard/amd/persimmon/BiosCallOuts.c | 12 +- src/mainboard/amd/persimmon/BiosCallOuts.h | 2 +- src/mainboard/amd/persimmon/PlatformGnbPcie.c | 18 +- .../amd/persimmon/PlatformGnbPcieComplex.h | 22 ++-- src/mainboard/amd/persimmon/agesawrapper.c | 30 ++-- src/mainboard/amd/persimmon/dimmSpd.c | 16 +- src/mainboard/amd/persimmon/get_bus_conf.c | 18 +- src/mainboard/amd/persimmon/mptable.c | 6 +- src/mainboard/amd/serengeti_cheetah/ap_romstage.c | 2 +- src/mainboard/amd/torpedo/PlatformGnbPcieComplex.h | 22 ++-- src/mainboard/amd/torpedo/acpi_tables.c | 6 +- src/mainboard/amd/torpedo/get_bus_conf.c | 18 +- src/mainboard/amd/torpedo/gpio.c | 68 ++++---- src/mainboard/amd/torpedo/gpio.h | 118 +++++++------- src/mainboard/amd/torpedo/mptable.c | 26 ++-- src/mainboard/asrock/e350m1/BiosCallOuts.c | 50 +++--- src/mainboard/asrock/e350m1/BiosCallOuts.h | 4 +- src/mainboard/asrock/e350m1/PlatformGnbPcie.c | 18 +- .../asrock/e350m1/PlatformGnbPcieComplex.h | 22 ++-- src/mainboard/asrock/e350m1/agesawrapper.c | 84 +++++----- src/mainboard/asrock/e350m1/agesawrapper.h | 10 +- src/mainboard/asrock/e350m1/buildOpts.c | 16 +- src/mainboard/asrock/e350m1/dimmSpd.c | 16 +- src/mainboard/asrock/e350m1/get_bus_conf.c | 18 +- src/mainboard/asrock/e350m1/mptable.c | 6 +- src/mainboard/asus/m5a88-v/mainboard.c | 2 +- src/mainboard/getac/p470/acpi_slic.c | 2 +- src/mainboard/getac/p470/acpi_tables.c | 10 +- src/mainboard/getac/p470/chip.h | 2 +- src/mainboard/getac/p470/ec_oem.c | 4 +- src/mainboard/getac/p470/hda_verb.h | 2 +- src/mainboard/getac/p470/mainboard.c | 10 +- src/mainboard/getac/p470/mainboard_smi.c | 2 +- src/mainboard/getac/p470/romstage.c | 10 +- src/mainboard/getac/p470/rtl8168.c | 2 +- src/mainboard/gigabyte/m57sli/mainboard.c | 2 +- src/mainboard/hp/dl165_g6_fam10/romstage.c | 2 +- src/mainboard/msi/ms9282/mainboard.c | 2 +- src/mainboard/msi/ms9652_fam10/mainboard.c | 2 +- src/mainboard/nvidia/l1_2pvv/hda_verb.h | 2 +- src/mainboard/nvidia/l1_2pvv/mainboard.c | 2 +- src/mainboard/siemens/sitemp_g1p1/acpi_tables.c | 28 ++-- src/mainboard/siemens/sitemp_g1p1/int15_func.c | 4 +- src/mainboard/siemens/sitemp_g1p1/mainboard.c | 168 ++++++++++---------- src/mainboard/siemens/sitemp_g1p1/mptable.c | 2 +- src/mainboard/siemens/sitemp_g1p1/romstage.c | 46 +++--- src/mainboard/wyse/s50/romstage.c | 2 +- src/northbridge/amd/agesa/family12/bootblock.c | 2 +- src/northbridge/amd/agesa/family12/northbridge.c | 16 +- src/northbridge/amd/agesa/family14/bootblock.c | 2 +- src/northbridge/amd/amdfam10/amdfam10.h | 2 +- src/northbridge/amd/amdht/AsPsDefs.h | 4 +- src/northbridge/amd/amdk8/coherent_ht.c | 4 +- src/northbridge/amd/amdk8/misc_control.c | 2 +- src/northbridge/amd/amdk8/raminit_f.c | 2 +- src/northbridge/amd/amdmct/amddefs.h | 2 +- src/northbridge/intel/i82830/smihandler.c | 2 +- src/northbridge/intel/i855/raminit.c | 8 +- src/northbridge/via/cx700/northbridge.h | 2 +- src/northbridge/via/vt8623/northbridge.h | 2 +- src/northbridge/via/vx800/northbridge.h | 2 +- src/southbridge/amd/cimx/sb800/SBPLATFORM.h | 14 +- src/southbridge/amd/cimx/sb800/bootblock.c | 4 +- src/southbridge/amd/cimx/sb900/bootblock.c | 6 +- src/southbridge/amd/cimx/sb900/early.c | 2 +- src/southbridge/amd/rs690/ht.c | 28 ++-- src/southbridge/amd/rs780/cmn.c | 2 +- src/southbridge/amd/rs780/gfx.c | 8 +- src/southbridge/amd/rs780/rs780.c | 2 +- src/southbridge/amd/sb600/sata.c | 4 +- src/southbridge/amd/sb700/ide.c | 4 +- src/southbridge/ti/pcixx12/chip.h | 2 +- src/southbridge/via/k8t890/bridge.c | 2 +- src/southbridge/via/k8t890/ctrl.c | 10 +- src/southbridge/via/k8t890/dram.c | 2 +- src/southbridge/via/k8t890/error.c | 2 +- src/southbridge/via/k8t890/k8x8xx.h | 4 +- src/southbridge/via/vt8237r/lpc.c | 6 +- src/superio/fintek/f71805f/chip.h | 2 +- src/superio/fintek/f71859/chip.h | 2 +- src/superio/fintek/f71863fg/chip.h | 2 +- src/superio/fintek/f71872/chip.h | 2 +- src/superio/fintek/f71889/chip.h | 2 +- src/superio/fintek/f81865f/chip.h | 2 +- src/superio/ite/it8661f/chip.h | 2 +- src/superio/ite/it8671f/chip.h | 2 +- src/superio/ite/it8673f/chip.h | 2 +- src/superio/ite/it8705f/chip.h | 2 +- src/superio/ite/it8712f/chip.h | 2 +- src/superio/ite/it8716f/chip.h | 2 +- src/superio/ite/it8718f/chip.h | 2 +- src/superio/nsc/pc8374/chip.h | 2 +- src/superio/nsc/pc87309/chip.h | 2 +- src/superio/nsc/pc87351/chip.h | 2 +- src/superio/nsc/pc87360/chip.h | 2 +- src/superio/nsc/pc87366/chip.h | 2 +- src/superio/nsc/pc87382/chip.h | 2 +- src/superio/nsc/pc87384/chip.h | 2 +- src/superio/nsc/pc87392/chip.h | 2 +- src/superio/nsc/pc87417/chip.h | 2 +- src/superio/nsc/pc87427/chip.h | 2 +- src/superio/nsc/pc97307/chip.h | 2 +- src/superio/nsc/pc97317/chip.h | 2 +- src/superio/nuvoton/wpcm450/chip.h | 2 +- src/superio/smsc/fdc37m60x/chip.h | 2 +- src/superio/smsc/fdc37n972/chip.h | 2 +- src/superio/smsc/kbc1100/chip.h | 2 +- src/superio/smsc/kbc1100/kbc1100_early_init.c | 6 +- src/superio/smsc/kbc1100/superio.c | 6 +- src/superio/smsc/lpc47b272/chip.h | 2 +- src/superio/smsc/lpc47b397/chip.h | 2 +- src/superio/smsc/lpc47m10x/chip.h | 2 +- src/superio/smsc/lpc47m15x/chip.h | 2 +- src/superio/smsc/lpc47n217/chip.h | 2 +- src/superio/smsc/lpc47n227/chip.h | 2 +- src/superio/smsc/lpc47n227/superio.c | 2 +- src/superio/smsc/sio10n268/chip.h | 2 +- src/superio/smsc/smscsuperio/chip.h | 2 +- src/superio/via/vt1211/chip.h | 2 +- src/superio/winbond/w83627dhg/chip.h | 2 +- src/superio/winbond/w83627ehg/chip.h | 2 +- src/superio/winbond/w83627hf/chip.h | 2 +- src/superio/winbond/w83627thg/chip.h | 2 +- src/superio/winbond/w83627uhg/chip.h | 2 +- src/superio/winbond/w83697hf/chip.h | 2 +- src/superio/winbond/w83977f/chip.h | 2 +- src/superio/winbond/w83977tf/chip.h | 2 +- util/cbfstool/cbfs-mkstage.c | 2 +- util/ectool/ec.c | 2 +- util/ifdtool/ifdtool.c | 2 +- util/nvramtool/accessors/cmos-hw-unix.c | 2 +- util/nvramtool/cli/nvramtool.c | 4 +- util/superiotool/amd.c | 2 +- util/superiotool/nuvoton.c | 2 +- 164 files changed, 824 insertions(+), 824 deletions(-)
diff --git a/src/arch/x86/include/arch/romcc_io.h b/src/arch/x86/include/arch/romcc_io.h index 79ea265..b0c8f65 100644 --- a/src/arch/x86/include/arch/romcc_io.h +++ b/src/arch/x86/include/arch/romcc_io.h @@ -3,7 +3,7 @@
#include <stdint.h>
-// arch/io.h is pulled in in many places but it could +// arch/io.h is pulled in in many places but it could // also be pulled in here for all romcc/romstage code. // #include <arch/io.h>
diff --git a/src/console/die.c b/src/console/die.c index 8c97f89..395ab75 100644 --- a/src/console/die.c +++ b/src/console/die.c @@ -1,6 +1,6 @@ /* * This file is part of the coreboot project. - * + * * Copyright (C) 2003 Eric Biederman * * This program is free software; you can redistribute it and/or diff --git a/src/console/post.c b/src/console/post.c index 7fc9d6f..08336a2 100644 --- a/src/console/post.c +++ b/src/console/post.c @@ -1,6 +1,6 @@ /* * This file is part of the coreboot project. - * + * * Copyright (C) 2003 Eric Biederman * * This program is free software; you can redistribute it and/or diff --git a/src/cpu/amd/agesa/apic_timer.c b/src/cpu/amd/agesa/apic_timer.c old mode 100755 new mode 100644 diff --git a/src/cpu/amd/agesa/family10/chip.h b/src/cpu/amd/agesa/family10/chip.h old mode 100755 new mode 100644 diff --git a/src/cpu/amd/agesa/family10/chip_name.c b/src/cpu/amd/agesa/family10/chip_name.c old mode 100755 new mode 100644 diff --git a/src/cpu/amd/agesa/family10/model_10_init.c b/src/cpu/amd/agesa/family10/model_10_init.c old mode 100755 new mode 100644 diff --git a/src/cpu/amd/agesa/family12/chip.h b/src/cpu/amd/agesa/family12/chip.h old mode 100755 new mode 100644 diff --git a/src/cpu/amd/agesa/family12/chip_name.c b/src/cpu/amd/agesa/family12/chip_name.c old mode 100755 new mode 100644 diff --git a/src/cpu/amd/agesa/family12/model_12_init.c b/src/cpu/amd/agesa/family12/model_12_init.c old mode 100755 new mode 100644 diff --git a/src/cpu/amd/model_10xxx/defaults.h b/src/cpu/amd/model_10xxx/defaults.h index 90b83e5..6df1032 100644 --- a/src/cpu/amd/model_10xxx/defaults.h +++ b/src/cpu/amd/model_10xxx/defaults.h @@ -91,7 +91,7 @@ static const struct {
{ BU_CFG2, AMD_DRBH_Cx, AMD_PTYPE_ALL, 0x00000000, 1 << (35-32), - 0x00000000, 1 << (35-32) }, /* Erratum 343 (set to 0 after CAR, in post_cache_as_ram()/model_10xxx_init() ) */ + 0x00000000, 1 << (35-32) }, /* Erratum 343 (set to 0 after CAR, in post_cache_as_ram()/model_10xxx_init() ) */
{ OSVW_ID_Length, AMD_DR_Bx | AMD_DR_Cx | AMD_DR_Dx, AMD_PTYPE_ALL, 0x00000004, 0x00000000, diff --git a/src/cpu/amd/model_10xxx/fidvid.c b/src/cpu/amd/model_10xxx/fidvid.c index 6cbd096..6be054c 100644 --- a/src/cpu/amd/model_10xxx/fidvid.c +++ b/src/cpu/amd/model_10xxx/fidvid.c @@ -17,84 +17,84 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ /* - * This file initializes the CPU cores for voltage and frequency settings + * This file initializes the CPU cores for voltage and frequency settings * in the different power states. */ /*
checklist (functions are in this file if no source file named) -Fam10 Bios and Kernel Development Guide #31116, rev 3.48, April 22, 2010 +Fam10 Bios and Kernel Development Guide #31116, rev 3.48, April 22, 2010
2.4.2.6 Requirements for p-states
1.- F3x[84:80] According to table 100 : prep_fid_change
-2.- COF/VID : - 2.4.2.9.1 Steps 1,3-6 and warning for 2,7 if they apply - fixPsNbVidBeforeWR(...) +2.- COF/VID : + 2.4.2.9.1 Steps 1,3-6 and warning for 2,7 if they apply + fixPsNbVidBeforeWR(...) 2.4.2.9.1 Step 8 enable_fid_change - We do this for all nodes, I don't understand BKDG 100% on - whether this is or isn't meant by "on the local + We do this for all nodes, I don't understand BKDG 100% on + whether this is or isn't meant by "on the local processor". Must be OK. 2.4.2.9.1 Steps 9-10 (repeat 1-7 and reset) romstage.c/init_cpus ? 2.4.2.9.1 Steps 11-12 init_fidvid_stage2 - 2.4.2.9.2 DualPlane PVI : Not supported, don't know how to detect, - needs specific circuitry. + 2.4.2.9.2 DualPlane PVI : Not supported, don't know how to detect, + needs specific circuitry.
3.- 2.4.2.7 dualPlaneOnly(dev)
4.- 2.4.2.8 applyBoostFIDOffset(dev)
-5.- enableNbPState1(dev) +5.- enableNbPState1(dev)
-6.- 2.4.1.7 +6.- 2.4.1.7 a) UpdateSinglePlaneNbVid() b) setVSRamp(), called from prep_fid_change c) prep_fid_change - d) improperly, for lack of voltage regulator details?, - F3xA0[PsiVidEn] in defaults.h + d) improperly, for lack of voltage regulator details?, + F3xA0[PsiVidEn] in defaults.h F3xA0[PsiVid] in init_cpus.c AMD_SetupPSIVID_d (before prep_fid_change)
-7.- TODO (Core Performance Boost is only available in revision E cpus, and we - don't seem to support those yet, at least they don't have any +7.- TODO (Core Performance Boost is only available in revision E cpus, and we + don't seem to support those yet, at least they don't have any constant in amddefs.h )
-8.- FIXME ? Transition to min Pstate according to 2.4.2.15.3 is required - by 2.4.2.6 after warm reset. But 2.4.2.15 states that it is not required - if the warm reset is issued by coreboot to update NbFid. So it is required - or not ? How can I tell who issued warm reset ? - Coreboot transitions to P0 instead, which is not recommended, and does +8.- FIXME ? Transition to min Pstate according to 2.4.2.15.3 is required + by 2.4.2.6 after warm reset. But 2.4.2.15 states that it is not required + if the warm reset is issued by coreboot to update NbFid. So it is required + or not ? How can I tell who issued warm reset ? + Coreboot transitions to P0 instead, which is not recommended, and does not follow 2.4.2.15.2 to do so.
-9.- TODO Requires information on current delivery capability - (depends on mainboard and maybe power supply ?). One might use a config +9.- TODO Requires information on current delivery capability + (depends on mainboard and maybe power supply ?). One might use a config option with the maximum number of Ampers that the board can deliver to CPU.
10.- [Multiprocessor] TODO 2.4.2.12 - [Uniprocessor] FIXME ? We call setPStateMaxVal() in init_fidvid_stage2, - but not sure this is what is meant by "Determine the valid set of - P-states based on enabled P-states indicated + [Uniprocessor] FIXME ? We call setPStateMaxVal() in init_fidvid_stage2, + but not sure this is what is meant by "Determine the valid set of + P-states based on enabled P-states indicated in MSRC001_00[68:64][PstateEn]" in 2.4.2.6-10
11.- finalPstateChange() from init_fidvid_Stage2 (BKDG says just "may", anyway)
-12.- generate ACPI for p-states. FIXME +12.- generate ACPI for p-states. FIXME Needs more assesment. There's some kind of fixed support that does not seem to depend on CPU revision or actual MSRC001_00[68:64] - as BKDG apparently requires. + as BKDG apparently requires. http://www.coreboot.org/ACPI#CPU_Power_Management At least for Tilapia board: src/mainboard/<vendor>/<model>/acpi_tables.c write_acpi_tables(...) calls - acpi_add_ssdt_pstates(...) + acpi_add_ssdt_pstates(...) in /src/northbridge/amd/amdfam10/amdfam10_acpi.c which apparently copies them from static info in - src/mainboard/<vendor>/<model>/acpi/cpstate.asl - + src/mainboard/<vendor>/<model>/acpi/cpstate.asl + "must also be completed"
a.- PllLockTime set in ruleset in defaults.h - BKDG says set it "If MSRC001_00[68:64][CpuFid] is different between - any two enabled P-states", but since it does not say "only if" + BKDG says set it "If MSRC001_00[68:64][CpuFid] is different between + any two enabled P-states", but since it does not say "only if" I guess it is safe to do it always.
b.- prep_fid_change(...) diff --git a/src/cpu/amd/model_fxx/model_fxx_init.c b/src/cpu/amd/model_fxx/model_fxx_init.c index ce5c810..ae5429d 100644 --- a/src/cpu/amd/model_fxx/model_fxx_init.c +++ b/src/cpu/amd/model_fxx/model_fxx_init.c @@ -265,7 +265,7 @@ static void init_ecc_memory(unsigned node_id)
/* See if we scrubbing should be enabled */ enable_scrubbing = 1; - if( get_option(&enable_scrubbing, "hw_scrubber") < 0 ) + if( get_option(&enable_scrubbing, "hw_scrubber") < 0 ) { enable_scrubbing = CONFIG_HW_SCRUBBER; } @@ -443,7 +443,7 @@ static inline void k8_errata(void) #endif { msr = rdmsr(NB_CFG_MSR); - + #if CONFIG_K8_REV_F_SUPPORT == 0 if (!is_cpu_pre_c0() && is_cpu_pre_d0()) { /* D0 later don't need it */ @@ -461,11 +461,11 @@ static inline void k8_errata(void) */ msr.lo |= 1 << 3; /* Erratum 169 */ - /* This supersedes erratum 131; 131 should not be applied with 169 + /* This supersedes erratum 131; 131 should not be applied with 169 * We also need to set some bits in the northbridge, handled in src/northbridge/amdk8/ */ msr.hi |= 1; - + wrmsr(NB_CFG_MSR, msr); } /* Erratum 122 */ diff --git a/src/cpu/amd/model_gx2/cpubug.c b/src/cpu/amd/model_gx2/cpubug.c index ff61a30..473766c 100644 --- a/src/cpu/amd/model_gx2/cpubug.c +++ b/src/cpu/amd/model_gx2/cpubug.c @@ -280,7 +280,7 @@ static void bug118339(void)
/* Code to enable FS2 even when BTB and VGTEAR SWAPSiFs are enabled * As per Todd Roberts in PBz1094 and PBz1095 - * Moved from CPUREG to CPUBUG per Tom Sylla + * Moved from CPUREG to CPUBUG per Tom Sylla */ msrnum = 0x04C000042; /* GLCP SETMCTL Register */ msr = rdmsr(msrnum); diff --git a/src/cpu/amd/model_lx/cpureginit.c b/src/cpu/amd/model_lx/cpureginit.c index 6e7de84..bad98b5 100644 --- a/src/cpu/amd/model_lx/cpureginit.c +++ b/src/cpu/amd/model_lx/cpureginit.c @@ -1,6 +1,6 @@ /* * This file is part of the coreboot project. - * + * * Copyright (C) 2006 Indrek Kruusa indrek.kruusa@artecdesign.ee * Copyright (C) 2006 Ronald G. Minnich rminnich@gmail.com * Copyright (C) 2007 Advanced Micro Devices, Inc. @@ -83,7 +83,7 @@ static const struct delay_controls { * hardware is not an exact science. And, finally, if an FS2 (JTAG debugger) * is hooked up, then just don't do anything. This code was written by a master * of the Dark Arts at AMD and should not be modified in any way. - * + * * [1] (http://www.thefreedictionary.com/juju) * * @param dimm0 The SMBus address of DIMM 0 (mainboard dependent). diff --git a/src/cpu/amd/model_lx/msrinit.c b/src/cpu/amd/model_lx/msrinit.c index 6569338..9c6e98e 100644 --- a/src/cpu/amd/model_lx/msrinit.c +++ b/src/cpu/amd/model_lx/msrinit.c @@ -45,7 +45,7 @@ static const msrinit_t msr_table[] = * of this extended memory will be to host the coreboot_ram stage at RAMBASE, * currently 1Mb. * These registers will be set to their correct value by the Northbridge init code. - * + * * WARNING: if coreboot_ram could not be loaded, these registers are probably * incorrectly set here. You may comment the following two lines and set RAMBASE * to 0x4000 to revert to the previous behavior for LX-boards. diff --git a/src/cpu/x86/lapic/lapic_cpu_init.c b/src/cpu/x86/lapic/lapic_cpu_init.c old mode 100755 new mode 100644 diff --git a/src/devices/oprom/x86.c b/src/devices/oprom/x86.c index 4d7357c..0c15b15 100644 --- a/src/devices/oprom/x86.c +++ b/src/devices/oprom/x86.c @@ -36,7 +36,7 @@ void (*realmode_call)(u32 addr, u32 eax, u32 ebx, u32 ecx, u32 edx, u32 esi, u32 edi) __attribute__((regparm(0))) = (void *)&__realmode_call;
-void (*realmode_interrupt)(u32 intno, u32 eax, u32 ebx, u32 ecx, u32 edx, +void (*realmode_interrupt)(u32 intno, u32 eax, u32 ebx, u32 ecx, u32 edx, u32 esi, u32 edi) __attribute__((regparm(0))) = (void *)&__realmode_interrupt;
@@ -361,7 +361,7 @@ void do_vsmbios(void) printk(BIOS_DEBUG, "Calling VSA module...\n");
/* ECX gets SMM, EDX gets SYSMEM */ - realmode_call(VSA2_ENTRY_POINT, 0x0, 0x0, MSR_GLIU0_SMM, + realmode_call(VSA2_ENTRY_POINT, 0x0, 0x0, MSR_GLIU0_SMM, MSR_GLIU0_SYSMEM, 0x0, 0x0);
printk(BIOS_DEBUG, "... VSA module returned.\n"); diff --git a/src/devices/oprom/x86_asm.S b/src/devices/oprom/x86_asm.S index 57c5338..488bfa6 100644 --- a/src/devices/oprom/x86_asm.S +++ b/src/devices/oprom/x86_asm.S @@ -255,7 +255,7 @@ __realmode_interrupt = RELOCATED(.) data32 ljmp $0, $RELOCATED(1f) 1:
- /* put the stack at the end of page zero. That way we can easily + /* put the stack at the end of page zero. That way we can easily * share it between real mode and protected mode, because %esp and * %ss:%sp point to the same memory. */ diff --git a/src/drivers/ati/ragexl/xlinit.c b/src/drivers/ati/ragexl/xlinit.c index 26a7caf..747b343 100644 --- a/src/drivers/ati/ragexl/xlinit.c +++ b/src/drivers/ati/ragexl/xlinit.c @@ -22,7 +22,7 @@ #include <device/pci_ops.h>
// FIXME BTEXT console within coreboot has been obsoleted -// and will go away. The BTEXT code in this file should be +// and will go away. The BTEXT code in this file should be // fixed to export a framebuffer console through the coreboot // table (and possibly make it available for bootsplash use) // Hence do only remove this if you fix the code. diff --git a/src/drivers/dec/21143/21143.c b/src/drivers/dec/21143/21143.c index c89d4f0..416b5ae 100644 --- a/src/drivers/dec/21143/21143.c +++ b/src/drivers/dec/21143/21143.c @@ -30,7 +30,7 @@ static void dec_21143_enable(device_t dev)
// The resource allocator should do this. If not, it needs to be fixed // differently. -#if 0 +#if 0 /* Command and status configuration (offset 0x04) */ pci_write_config32(dev, 0x04, 0x02800107); printk(BIOS_DEBUG, "0x04 = %08x (07 01 80 02)\n", diff --git a/src/drivers/oxford/oxpcie/oxpcie_early.c b/src/drivers/oxford/oxpcie/oxpcie_early.c index 235c52c..3480654 100644 --- a/src/drivers/oxford/oxpcie/oxpcie_early.c +++ b/src/drivers/oxford/oxpcie/oxpcie_early.c @@ -29,7 +29,7 @@ CONFIG_OXFORD_OXPCIE_BRIDGE_FUNCTION)
#define OXPCIE_DEVICE \ - PCI_DEV(CONFIG_OXFORD_OXPCIE_BRIDGE_SUBORDINATE, 0, 0) + PCI_DEV(CONFIG_OXFORD_OXPCIE_BRIDGE_SUBORDINATE, 0, 0)
void oxford_init(void) { @@ -57,7 +57,7 @@ void oxford_init(void)
/* Memory window for the OXPCIe952 card */ // XXX is the calculation of base and limit corect? - pci_write_config32(PCIE_BRIDGE, PCI_MEMORY_BASE, + pci_write_config32(PCIE_BRIDGE, PCI_MEMORY_BASE, ((CONFIG_OXFORD_OXPCIE_BASE_ADDRESS & 0xffff0000) | ((CONFIG_OXFORD_OXPCIE_BASE_ADDRESS >> 16) & 0xff00)));
@@ -66,7 +66,7 @@ void oxford_init(void) reg16 |= PCI_COMMAND_MEMORY; pci_write_config16(PCIE_BRIDGE, PCI_COMMAND, reg16);
- // FIXME Add a timeout or this will hang forever if + // FIXME Add a timeout or this will hang forever if // no device is in the slot. u32 id = 0; while ((id == 0) || (id == 0xffffffff)) diff --git a/src/include/console/post_codes.h b/src/include/console/post_codes.h index f1c12b3..a72da69 100644 --- a/src/include/console/post_codes.h +++ b/src/include/console/post_codes.h @@ -12,7 +12,7 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * + * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA @@ -20,32 +20,32 @@
/** * @file post_codes.h - * + * * This aims to be a central point for POST codes used throughout coreboot. * All POST codes should be declared here as macros, and post_code() should * be used with the macros instead of hardcoded values. This allows us to * quicly reference POST codes when nothing is working - * + * * The format for a POST code macro is * #define POST_WHAT_WE_COMMUNICATE_IS_HAPPENING_WHEN_THIS_CODE_IS_POSTED * Lets's keep it at POST_* instead of POST_CODE_* - * + * * This file is also included by early assembly files. Only use #define s; * no function prototypes allowed here - * + * * DOCUMENTATION: - * Please document any and all post codes using Doxygen style comments. We + * Please document any and all post codes using Doxygen style comments. We * want to be able to generate a verbose enough documentation that is useful * during debugging. Failure to do so will result in your patch being rejected * without any explanation or effort on part of the maintainers. - * + * */ #ifndef POST_CODES_H #define POST_CODES_H
/** * \brief Entry into 'crt0.s'. reset code jumps to here - * + * * First instruction that gets executed after the reset vector jumps. * This indicates that the reset vector points to the correct code segment. */ @@ -53,7 +53,7 @@
/** * \brief Entry into protected mode - * + * * Preparing to enter protected mode. This is POSTed right before changing to * protected mode. */ @@ -61,14 +61,14 @@
/** * \brief Start copying coreboot to RAM with decompression if compressed - * + * * POSTed before ramstage is about to be loaded into memory */ #define POST_PREPARE_RAMSTAGE 0x11
/** * \brief Copy/decompression finished; jumping to RAM - * + * * This is called after ramstage is loaded in memory, and before * the code jumps there. This represents the end of romstage. */ @@ -77,14 +77,14 @@
/** * \brief Entry into c_start - * + * * c_start.S is the first code executing in ramstage. */ #define POST_ENTRY_C_START 0x13
/** * \brief Entry into coreboot in hardwaremain (RAM) - * + * * This is the first call in hardwaremain.c. If this code is POSTed, then * ramstage has succesfully loaded and started executing. */ @@ -92,14 +92,14 @@
/** * \brief Console is initialized - * + * * The console is initialized and is ready for usage */ #define POST_CONSOLE_READY 0x39
/** * \brief Console boot message succeeded - * + * * First console message has been succesfully sent through the console backend * driver. */ @@ -107,28 +107,28 @@
/** * \brief Devices have been enumerated - * + * * Bus scan, and device enumeration has completed. */ #define POST_DEVICE_ENUMERATION_COMPLETE 0x66
/** * \brief Devices have been configured - * + * * Device confgration has completed. */ #define POST_DEVICE_CONFIGURATION_COMPLETE 0x88
/** * \brief Devices have been enabled - * + * * Devices have been enabled. */ #define POST_DEVICES_ENABLED 0x89
/** * \brief Entry into elf boot - * + * * This POST code is called right before invoking jmp_to_elf_entry() * jmp_to_elf_entry() invokes the payload, and should never return */ @@ -136,7 +136,7 @@
/** * \brief Jumping to payload - * + * * Called right before jumping to a payload. If the boot sequence stops with * this code, chances are the payload freezes. */ @@ -144,16 +144,16 @@
/** * \brief Not supposed to get here - * + * * A function that should not have returned, returned - * + * * Check the console output for details. */ #define POST_DEAD_CODE 0xee
/** * \brief Pre call to hardwaremain() - * + * * POSTed right before hardwaremain is called from c_start.S * TODO: Change this code to a lower number */ @@ -161,9 +161,9 @@
/** * \brief Elfload fail or die() called - * + * * Coreboot was not able to load the payload, no payload was detected - * or die() was called. + * or die() was called. * \n * If this code appears before entering ramstage, then most likely * ramstage is corrupted, and reflashing of the ROM chip is needed. @@ -182,7 +182,7 @@ * They overlap with previous codes, and most are not even used * Some maiboards still require them, but they are deprecated. We want to consolidate * our own POST code structure with the codes above. - * + * * standard AMD post definitions for the AMD Geode */ #define POST_Output_Port (0x080) /* port to write post codes to*/ diff --git a/src/include/cpu/amd/amdfam12.h b/src/include/cpu/amd/amdfam12.h old mode 100755 new mode 100644 diff --git a/src/include/cpu/x86/cache.h b/src/include/cpu/x86/cache.h index a473d66..c2de073 100644 --- a/src/include/cpu/x86/cache.h +++ b/src/include/cpu/x86/cache.h @@ -22,7 +22,7 @@
/* * Need two versions because ROMCC chokes on certain clobbers: - * cache.h:29.71: cache.h:60.24: earlymtrr.c:117.23: romstage.c:144.33: + * cache.h:29.71: cache.h:60.24: earlymtrr.c:117.23: romstage.c:144.33: * 0x1559920 asm Internal compiler error: lhs 1 regcm == 0 */
diff --git a/src/include/cpu/x86/msr.h b/src/include/cpu/x86/msr.h index e8bc195..40926df 100644 --- a/src/include/cpu/x86/msr.h +++ b/src/include/cpu/x86/msr.h @@ -23,7 +23,7 @@ typedef struct msr_struct unsigned hi; } msr_t;
-typedef struct msrinit_struct +typedef struct msrinit_struct { unsigned index; msr_t msr; diff --git a/src/lib/uart8250mem.c b/src/lib/uart8250mem.c index e79cb63..75d51ff 100644 --- a/src/lib/uart8250mem.c +++ b/src/lib/uart8250mem.c @@ -120,7 +120,7 @@ u32 uart_mem_init(void)
if (dev) { struct resource *res = find_resource(dev, 0x10); - + if (res) { uart_bar = res->base + 0x1000; // for 1st UART // uart_bar = res->base + 0x2000; // for 2nd UART @@ -131,7 +131,7 @@ u32 uart_mem_init(void) #endif uart_bar = CONFIG_OXFORD_OXPCIE_BASE_ADDRESS + 0x1000; // 1st UART // uart_bar = CONFIG_OXFORD_OXPCIE_BASE_ADDRESS + 0x2000; // 2nd UART - + div = 4000000 / uart_baud; #endif
diff --git a/src/lib/usbdebug.c b/src/lib/usbdebug.c index 6b75acf..800ee52 100644 --- a/src/lib/usbdebug.c +++ b/src/lib/usbdebug.c @@ -167,7 +167,7 @@ static void dbgp_get_data(struct ehci_dbg_port *ehci_debug, void *buf, int size) bytes[i] = (hi >> (8*(i - 4))) & 0xff; }
-static int dbgp_bulk_write(struct ehci_dbg_port *ehci_debug, +static int dbgp_bulk_write(struct ehci_dbg_port *ehci_debug, unsigned devnum, unsigned endpoint, const char *bytes, int size) { u32 pids, addr, ctrl; @@ -234,7 +234,7 @@ static int dbgp_bulk_read(struct ehci_dbg_port *ehci_debug, unsigned devnum,
int dbgp_bulk_read_x(struct ehci_debug_info *dbg_info, void *data, int size) { - return dbgp_bulk_read(dbg_info->ehci_debug, dbg_info->devnum, + return dbgp_bulk_read(dbg_info->ehci_debug, dbg_info->devnum, dbg_info->endpoint_in, data, size); }
@@ -373,7 +373,7 @@ int usbdebug_init(unsigned ehci_bar, unsigned offset, struct ehci_debug_info *in int playtimes = 3;
ehci_caps = (struct ehci_caps *)ehci_bar; - ehci_regs = (struct ehci_regs *)(ehci_bar + + ehci_regs = (struct ehci_regs *)(ehci_bar + HC_LENGTH(read32((unsigned long)&ehci_caps->hc_capbase))); ehci_debug = (struct ehci_dbg_port *)(ehci_bar + offset); info->ehci_debug = (void *)0; diff --git a/src/mainboard/amd/inagua/BiosCallOuts.c b/src/mainboard/amd/inagua/BiosCallOuts.c index 7dcdd96..a72f96b 100644 --- a/src/mainboard/amd/inagua/BiosCallOuts.c +++ b/src/mainboard/amd/inagua/BiosCallOuts.c @@ -16,7 +16,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ - + #include "agesawrapper.h" #include "amdlib.h" #include "BiosCallOuts.h" @@ -58,11 +58,11 @@ STATIC BIOS_CALLOUT_STRUCT BiosCallouts[REQUIRED_CALLOUTS] = {AGESA_GET_IDS_INIT_DATA, BiosGetIdsInitData }, - + {AGESA_HOOKBEFORE_DQS_TRAINING, BiosHookBeforeDQSTraining }, - + {AGESA_HOOKBEFORE_DRAM_INIT, BiosHookBeforeDramInit }, @@ -210,7 +210,7 @@ AGESA_STATUS BiosAllocateBuffer (UINT32 Func, UINT32 Data, VOID *ConfigPtr) /* If BufferHandle has not been allocated on the heap, CurrNodePtr here points to the end of the allocated nodes list. */ - + } /* Find the node that best fits the requested buffer size */ FreedNodeOffset = BiosHeapBasePtr->StartOfFreedNodes; @@ -260,7 +260,7 @@ AGESA_STATUS BiosAllocateBuffer (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
/* If BestFitNode is the first buffer in the list, then update StartOfFreedNodes to reflect the new free node - */ + */ if (BestFitNodeOffset == BiosHeapBasePtr->StartOfFreedNodes) { BiosHeapBasePtr->StartOfFreedNodes = NextFreeOffset; } else { @@ -345,10 +345,10 @@ AGESA_STATUS BiosDeallocateBuffer (UINT32 Func, UINT32 Data, VOID *ConfigPtr) FreedNodePtr->NextNodeOffset = 0;
} else { - /* Otherwise, add freed node to the start of the list - Update NextNodeOffset and BufferSize to include the + /* Otherwise, add freed node to the start of the list + Update NextNodeOffset and BufferSize to include the size of BIOS_BUFFER_NODE - */ + */ AllocNodePtr->NextNodeOffset = FreedNodeOffset; } /* Update StartOfFreedNodes to the new first node */ @@ -356,7 +356,7 @@ AGESA_STATUS BiosDeallocateBuffer (UINT32 Func, UINT32 Data, VOID *ConfigPtr) } else { /* Traverse list of freed nodes to find where the deallocated node should be place - */ + */ NextNodeOffset = FreedNodeOffset; NextNodePtr = FreedNodePtr; while (AllocNodeOffset > NextNodeOffset) { @@ -370,7 +370,7 @@ AGESA_STATUS BiosDeallocateBuffer (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
/* If deallocated node is adjacent to the next node, concatenate both nodes - */ + */ if (NextNodeOffset == EndNodeOffset) { NextNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + NextNodeOffset); AllocNodePtr->BufferSize += NextNodePtr->BufferSize; @@ -384,7 +384,7 @@ AGESA_STATUS BiosDeallocateBuffer (UINT32 Func, UINT32 Data, VOID *ConfigPtr) } /* If deallocated node is adjacent to the previous node, concatenate both nodes - */ + */ PrevNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + PrevNodeOffset); EndNodeOffset = PrevNodeOffset + PrevNodePtr->BufferSize; if (AllocNodeOffset == EndNodeOffset) { @@ -448,10 +448,10 @@ AGESA_STATUS BiosReset (UINT32 Func, UINT32 Data, VOID *ConfigPtr) UINT8 Value; UINTN ResetType; AMD_CONFIG_PARAMS *StdHeader; - + ResetType = Data; StdHeader = ConfigPtr; - + // // Perform the RESET based upon the ResetType. In case of // WARM_RESET_WHENVER and COLD_RESET_WHENEVER, the request will go to @@ -463,17 +463,17 @@ AGESA_STATUS BiosReset (UINT32 Func, UINT32 Data, VOID *ConfigPtr) case WARM_RESET_WHENEVER: case COLD_RESET_WHENEVER: break; - + case WARM_RESET_IMMEDIATELY: case COLD_RESET_IMMEDIATELY: Value = 0x06; LibAmdIoWrite (AccessWidth8, 0xCf9, &Value, StdHeader); break; - + default: break; } - + Status = 0; return Status; } @@ -506,10 +506,10 @@ AGESA_STATUS BiosHookBeforeDramInit (UINT32 Func, UINT32 Data, VOID *ConfigPtr) UINT8 Data8; UINT16 Data16; UINT8 TempData8; - + FcnData = Data; MemData = ConfigPtr; - + Status = AGESA_SUCCESS; /* Get SB800 MMIO Base (AcpiMmioAddr) */ WriteIo8 (0xCD6, 0x27); @@ -520,14 +520,14 @@ AGESA_STATUS BiosHookBeforeDramInit (UINT32 Func, UINT32 Data, VOID *ConfigPtr) Data16 |= Data8; AcpiMmioAddr = (UINT32)Data16 << 16; GpioMmioAddr = AcpiMmioAddr + GPIO_BASE; - + Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG178); Data8 &= ~BIT5; TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178); TempData8 &= 0x03; TempData8 |= Data8; Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, TempData8); - + Data8 |= BIT2+BIT3; Data8 &= ~BIT4; TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178); @@ -546,7 +546,7 @@ AGESA_STATUS BiosHookBeforeDramInit (UINT32 Func, UINT32 Data, VOID *ConfigPtr) TempData8 &= 0x23; TempData8 |= Data8; Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, TempData8); - + switch(MemData->ParameterListPtr->DDR3Voltage){ case VOLT1_35: Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178); @@ -586,12 +586,12 @@ AGESA_STATUS BiosGnbPcieSlotReset (UINT32 Func, UINT32 Data, VOID *ConfigPtr) AGESA_STATUS Status; UINTN FcnData; PCIe_SLOT_RESET_INFO *ResetInfo; - + UINT32 GpioMmioAddr; UINT32 AcpiMmioAddr; UINT8 Data8; UINT16 Data16; - + FcnData = Data; ResetInfo = ConfigPtr; // Get SB800 MMIO Base (AcpiMmioAddr) @@ -611,13 +611,13 @@ AGESA_STATUS BiosGnbPcieSlotReset (UINT32 Func, UINT32 Data, VOID *ConfigPtr) { case AssertSlotReset: Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG21); - Data8 &= ~(UINT8)BIT6 ; + Data8 &= ~(UINT8)BIT6 ; Write64Mem8(GpioMmioAddr+SB_GPIO_REG21, Data8); // MXM_GPIO0. GPIO21 Status = AGESA_SUCCESS; break; case DeassertSlotReset: Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG21); - Data8 |= BIT6 ; + Data8 |= BIT6 ; Write64Mem8 (GpioMmioAddr+SB_GPIO_REG21, Data8); // MXM_GPIO0. GPIO21 Status = AGESA_SUCCESS; break; @@ -634,7 +634,7 @@ AGESA_STATUS BiosGnbPcieSlotReset (UINT32 Func, UINT32 Data, VOID *ConfigPtr) break; case DeassertSlotReset: Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG25); - Data8 |= BIT6 ; + Data8 |= BIT6 ; Write64Mem8 (GpioMmioAddr+SB_GPIO_REG25, Data8); // PCIE_RST#_LAN, GPIO25 Status = AGESA_SUCCESS; break; diff --git a/src/mainboard/amd/inagua/BiosCallOuts.h b/src/mainboard/amd/inagua/BiosCallOuts.h index 2912ec6..4efe15f 100644 --- a/src/mainboard/amd/inagua/BiosCallOuts.h +++ b/src/mainboard/amd/inagua/BiosCallOuts.h @@ -16,7 +16,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ - + #ifndef _BIOS_CALLOUT_H_ #define _BIOS_CALLOUT_H_
@@ -45,7 +45,7 @@ AGESA_STATUS GetBiosCallout (UINT32 Func, UINT32 Data, VOID *ConfigPtr);
/* REQUIRED CALLOUTS * AGESA ADVANCED CALLOUTS - CPU - */ + */ AGESA_STATUS BiosAllocateBuffer (UINT32 Func, UINT32 Data, VOID *ConfigPtr); AGESA_STATUS BiosDeallocateBuffer (UINT32 Func, UINT32 Data, VOID *ConfigPtr); AGESA_STATUS BiosLocateBuffer (UINT32 Func, UINT32 Data, VOID *ConfigPtr); diff --git a/src/mainboard/amd/inagua/PlatformGnbPcie.c b/src/mainboard/amd/inagua/PlatformGnbPcie.c index 1840afc..4f00071 100644 --- a/src/mainboard/amd/inagua/PlatformGnbPcie.c +++ b/src/mainboard/amd/inagua/PlatformGnbPcie.c @@ -56,7 +56,7 @@ PCIe_PORT_DESCRIPTOR PortList [] = { DESCRIPTOR_TERMINATE_LIST, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 0, 3), PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT8_PORT_PRESENT, GNB_GPP_PORT8_CHANNEL_TYPE, 8, GNB_GPP_PORT8_HOTPLUG_SUPPORT, GNB_GPP_PORT8_SPEED_MODE, GNB_GPP_PORT8_SPEED_MODE, GNB_GPP_PORT8_LINK_ASPM, 0) - } + } };
PCIe_DDI_DESCRIPTOR DdiList [] = { @@ -116,8 +116,8 @@ OemCustomizeInitEarly ( // // Allocate buffer for PCIe_COMPLEX_DESCRIPTOR , PCIe_PORT_DESCRIPTOR and PCIe_DDI_DESCRIPTOR // - AllocHeapParams.RequestedBufferSize = (sizeof (PCIe_COMPLEX_DESCRIPTOR) + - sizeof (PCIe_PORT_DESCRIPTOR) * 5 + + AllocHeapParams.RequestedBufferSize = (sizeof (PCIe_COMPLEX_DESCRIPTOR) + + sizeof (PCIe_PORT_DESCRIPTOR) * 5 + sizeof (PCIe_DDI_DESCRIPTOR)) * 2;
AllocHeapParams.BufferHandle = AMD_MEM_MISC_HANDLES_START; @@ -125,10 +125,10 @@ OemCustomizeInitEarly ( Status = HeapAllocateBuffer (&AllocHeapParams, &InitEarly->StdHeader); if ( Status!= AGESA_SUCCESS) { // Could not allocate buffer for PCIe_COMPLEX_DESCRIPTOR , PCIe_PORT_DESCRIPTOR and PCIe_DDI_DESCRIPTOR - ASSERT(FALSE); + ASSERT(FALSE); return Status; } - + BrazosPcieComplexListPtr = (PCIe_COMPLEX_DESCRIPTOR *) AllocHeapParams.BufferPtr;
AllocHeapParams.BufferPtr += sizeof (PCIe_COMPLEX_DESCRIPTOR); @@ -136,7 +136,7 @@ OemCustomizeInitEarly (
AllocHeapParams.BufferPtr += sizeof (PCIe_PORT_DESCRIPTOR) * 5; BrazosPcieDdiPtr = (PCIe_DDI_DESCRIPTOR *) AllocHeapParams.BufferPtr; - + LibAmdMemFill (BrazosPcieComplexListPtr, 0, sizeof (PCIe_COMPLEX_DESCRIPTOR), @@ -146,7 +146,7 @@ OemCustomizeInitEarly ( 0, sizeof (PCIe_PORT_DESCRIPTOR) * 5, &InitEarly->StdHeader); - + LibAmdMemFill (BrazosPcieDdiPtr, 0, sizeof (PCIe_DDI_DESCRIPTOR) * 2, @@ -160,7 +160,7 @@ OemCustomizeInitEarly ( ((PCIe_COMPLEX_DESCRIPTOR*)BrazosPcieComplexListPtr)->PciePortList = (PCIe_PORT_DESCRIPTOR*)BrazosPciePortPtr; ((PCIe_COMPLEX_DESCRIPTOR*)BrazosPcieComplexListPtr)->DdiLinkList = (PCIe_DDI_DESCRIPTOR*)BrazosPcieDdiPtr;
- InitEarly->GnbConfig.PcieComplexList = BrazosPcieComplexListPtr; - InitEarly->GnbConfig.PsppPolicy = 0; + InitEarly->GnbConfig.PcieComplexList = BrazosPcieComplexListPtr; + InitEarly->GnbConfig.PsppPolicy = 0; }
diff --git a/src/mainboard/amd/inagua/PlatformGnbPcieComplex.h b/src/mainboard/amd/inagua/PlatformGnbPcieComplex.h index f35d8db..b51089f 100644 --- a/src/mainboard/amd/inagua/PlatformGnbPcieComplex.h +++ b/src/mainboard/amd/inagua/PlatformGnbPcieComplex.h @@ -25,42 +25,42 @@ #include "amdlib.h"
//GNB GPP Port4 -#define GNB_GPP_PORT4_PORT_PRESENT 1 //0:Disable 1:Enable +#define GNB_GPP_PORT4_PORT_PRESENT 1 //0:Disable 1:Enable #define GNB_GPP_PORT4_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2 #define GNB_GPP_PORT4_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1 -#define GNB_GPP_PORT4_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) +#define GNB_GPP_PORT4_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db) #define GNB_GPP_PORT4_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced
//GNB GPP Port5 -#define GNB_GPP_PORT5_PORT_PRESENT 1 //0:Disable 1:Enable +#define GNB_GPP_PORT5_PORT_PRESENT 1 //0:Disable 1:Enable #define GNB_GPP_PORT5_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2 #define GNB_GPP_PORT5_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1 -#define GNB_GPP_PORT5_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) +#define GNB_GPP_PORT5_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db) #define GNB_GPP_PORT5_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced
//GNB GPP Port6 -#define GNB_GPP_PORT6_PORT_PRESENT 1 //0:Disable 1:Enable +#define GNB_GPP_PORT6_PORT_PRESENT 1 //0:Disable 1:Enable #define GNB_GPP_PORT6_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2 #define GNB_GPP_PORT6_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1 -#define GNB_GPP_PORT6_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) +#define GNB_GPP_PORT6_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db) #define GNB_GPP_PORT6_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced
//GNB GPP Port7 -#define GNB_GPP_PORT7_PORT_PRESENT 1 //0:Disable 1:Enable +#define GNB_GPP_PORT7_PORT_PRESENT 1 //0:Disable 1:Enable #define GNB_GPP_PORT7_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2 #define GNB_GPP_PORT7_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1 -#define GNB_GPP_PORT7_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) +#define GNB_GPP_PORT7_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db) #define GNB_GPP_PORT7_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced
//GNB GPP Port8 -#define GNB_GPP_PORT8_PORT_PRESENT 1 //0:Disable 1:Enable +#define GNB_GPP_PORT8_PORT_PRESENT 1 //0:Disable 1:Enable #define GNB_GPP_PORT8_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2 #define GNB_GPP_PORT8_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1 -#define GNB_GPP_PORT8_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) +#define GNB_GPP_PORT8_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db) #define GNB_GPP_PORT8_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced
@@ -68,5 +68,5 @@ VOID OemCustomizeInitEarly ( IN OUT AMD_EARLY_PARAMS *InitEarly ); - + #endif //_PLATFORM_GNB_PCIE_COMPLEX_H diff --git a/src/mainboard/amd/inagua/acpi_tables.c b/src/mainboard/amd/inagua/acpi_tables.c index 4c084e0..cc37ed2 100644 --- a/src/mainboard/amd/inagua/acpi_tables.c +++ b/src/mainboard/amd/inagua/acpi_tables.c @@ -62,18 +62,18 @@ unsigned long acpi_fill_mcfg(unsigned long current)
unsigned long acpi_fill_madt(unsigned long current) { - + /* create all subtables for processors */ current += acpi_create_madt_lapic((acpi_madt_lapic_t *)current, 0, 0); current += acpi_create_madt_lapic((acpi_madt_lapic_t *)current, 1, 1); - + /* Write SB800 IOAPIC, only one */ current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, apicid_sb800, IO_APIC_ADDR, 0);
current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) current, 0, 0, 2, 0); - + /* 0: mean bus 0--->ISA */ /* 0: PIC 0 */ /* 2: APIC 2 */ diff --git a/src/mainboard/amd/inagua/agesawrapper.c b/src/mainboard/amd/inagua/agesawrapper.c index cbdb23d..df5cd1e 100644 --- a/src/mainboard/amd/inagua/agesawrapper.c +++ b/src/mainboard/amd/inagua/agesawrapper.c @@ -21,7 +21,7 @@ * M O D U L E S U S E D *---------------------------------------------------------------------------------------- */ - + #include <stdint.h> #include <string.h> #include "agesawrapper.h" @@ -52,8 +52,8 @@ VOID *AcpiSlit = NULL;
VOID *AcpiWheaMce = NULL; VOID *AcpiWheaCmc = NULL; -VOID *AcpiAlib = NULL; - +VOID *AcpiAlib = NULL; +
/*---------------------------------------------------------------------------------------- * T Y P E D E F S A N D S T R U C T U R E S @@ -64,17 +64,17 @@ VOID *AcpiAlib = NULL; * P R O T O T Y P E S O F L O C A L F U N C T I O N S *---------------------------------------------------------------------------------------- */ - + /*---------------------------------------------------------------------------------------- * E X P O R T E D F U N C T I O N S *---------------------------------------------------------------------------------------- */ - + /*--------------------------------------------------------------------------------------- * L O C A L F U N C T I O N S *--------------------------------------------------------------------------------------- */ -UINT32 +UINT32 agesawrapper_amdinitcpuio ( VOID ) @@ -84,30 +84,30 @@ agesawrapper_amdinitcpuio ( UINT32 PciData; PCI_ADDR PciAddress; AMD_CONFIG_PARAMS StdHeader; - + /* Enable MMIO on AMD CPU Address Map Controller */ - + /* Start to set MMIO 0000A0000-0000BFFFF to Node0 Link0 */ PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x84); PciData = 0x00000B00; - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x80); PciData = 0x00000A03; LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - + /* Set TOM-DFFFFFFF to Node0 Link0. */ PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x8C); PciData = 0x00DFFF00; - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); LibAmdMsrRead (0xC001001A, &MsrReg, &StdHeader); MsrReg = (MsrReg >> 8) | 3; PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x88); PciData = (UINT32)MsrReg; - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); /* Set E0000000-FFFFFFFF to Node0 Link0 with NP set. */ PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xBC); PciData = 0x00FFFF00 | 0x80; - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xB8); PciData = (PCIE_BASE_ADDRESS >> 8) | 03; LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); @@ -121,8 +121,8 @@ agesawrapper_amdinitcpuio ( Status = AGESA_SUCCESS; return (UINT32)Status; } - -UINT32 + +UINT32 agesawrapper_amdinitmmio ( VOID ) @@ -132,29 +132,29 @@ agesawrapper_amdinitmmio ( UINT32 PciData; PCI_ADDR PciAddress; AMD_CONFIG_PARAMS StdHeader; - + /* Set the MMIO Configuration Base Address and Bus Range onto MMIO configuration base Address MSR register. */ MsrReg = CONFIG_MMCONF_BASE_ADDRESS | (8 << 2) | 1; LibAmdMsrWrite (0xC0010058, &MsrReg, &StdHeader); - + /* Set the NB_CFG MSR register. Enable CF8 extended configuration cycles. */ LibAmdMsrRead (0xC001001F, &MsrReg, &StdHeader); MsrReg = MsrReg | 0x0000400000000000; LibAmdMsrWrite (0xC001001F, &MsrReg, &StdHeader); - + /* Set Ontario Link Data */ PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0, 0, 0xE0); PciData = 0x01308002; - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0, 0, 0xE4); PciData = (AMD_APU_SSID<<0x10)|AMD_APU_SVID; - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); +
/* Set ROM cache onto WP to decrease post time */ MsrReg = (0x0100000000 - CONFIG_ROM_SIZE) | 5; @@ -166,7 +166,7 @@ agesawrapper_amdinitmmio ( return (UINT32)Status; }
-UINT32 +UINT32 agesawrapper_amdinitreset ( VOID ) @@ -174,7 +174,7 @@ agesawrapper_amdinitreset ( AGESA_STATUS status; AMD_INTERFACE_PARAMS AmdParamStruct; AMD_RESET_PARAMS AmdResetParams; - + LibAmdMemFill (&AmdParamStruct, 0, sizeof (AMD_INTERFACE_PARAMS), @@ -196,14 +196,14 @@ agesawrapper_amdinitreset ( AmdParamStruct.StdHeader.ImageBasePtr = 0; AmdCreateStruct (&AmdParamStruct); AmdResetParams.HtConfig.Depth = 0; - + status = AmdInitReset ((AMD_RESET_PARAMS *)AmdParamStruct.NewStructPtr); if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(); AmdReleaseStruct (&AmdParamStruct); return (UINT32)status; - } - -UINT32 + } + +UINT32 agesawrapper_amdinitearly ( VOID ) @@ -211,7 +211,7 @@ agesawrapper_amdinitearly ( AGESA_STATUS status; AMD_INTERFACE_PARAMS AmdParamStruct; AMD_EARLY_PARAMS *AmdEarlyParamsPtr; - + LibAmdMemFill (&AmdParamStruct, 0, sizeof (AMD_INTERFACE_PARAMS), @@ -224,10 +224,10 @@ agesawrapper_amdinitearly ( AmdParamStruct.StdHeader.Func = 0; AmdParamStruct.StdHeader.ImageBasePtr = 0; AmdCreateStruct (&AmdParamStruct); - + AmdEarlyParamsPtr = (AMD_EARLY_PARAMS *)AmdParamStruct.NewStructPtr; OemCustomizeInitEarly (AmdEarlyParamsPtr); - + status = AmdInitEarly ((AMD_EARLY_PARAMS *)AmdParamStruct.NewStructPtr); if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(); AmdReleaseStruct (&AmdParamStruct); @@ -235,7 +235,7 @@ agesawrapper_amdinitearly ( return (UINT32)status; }
-UINT32 +UINT32 agesawrapper_amdinitpost ( VOID ) @@ -277,7 +277,7 @@ agesawrapper_amdinitpost ( return (UINT32)status; }
-UINT32 +UINT32 agesawrapper_amdinitenv ( VOID ) @@ -304,7 +304,7 @@ agesawrapper_amdinitenv ( /* Initialize Subordinate Bus Number and Secondary Bus Number * In platform BIOS this address is allocated by PCI enumeration code Modify D1F0x18 - */ + */ PciAddress.Address.Bus = 0; PciAddress.Address.Device = 1; PciAddress.Address.Function = 0; @@ -407,17 +407,17 @@ agesawrapper_getlateinitptr ( } }
-UINT32 +UINT32 agesawrapper_amdinitmid ( VOID ) { AGESA_STATUS status; AMD_INTERFACE_PARAMS AmdParamStruct; - + /* Enable MMIO on AMD CPU Address Map Controller */ agesawrapper_amdinitcpuio (); - + LibAmdMemFill (&AmdParamStruct, 0, sizeof (AMD_INTERFACE_PARAMS), @@ -439,7 +439,7 @@ agesawrapper_amdinitmid ( return (UINT32)status; }
-UINT32 +UINT32 agesawrapper_amdinitlate ( VOID ) @@ -475,9 +475,9 @@ agesawrapper_amdinitlate ( return (UINT32)Status; }
-UINT32 +UINT32 agesawrapper_amdlaterunaptask ( - UINT32 Data, + UINT32 Data, VOID *ConfigPtr ) { @@ -512,7 +512,7 @@ agesawrapper_amdlaterunaptask ( return (UINT32)Status; }
-UINT32 +UINT32 agesawrapper_amdreadeventlog ( VOID ) diff --git a/src/mainboard/amd/inagua/agesawrapper.h b/src/mainboard/amd/inagua/agesawrapper.h index fd46dc6..f6e6dec 100644 --- a/src/mainboard/amd/inagua/agesawrapper.h +++ b/src/mainboard/amd/inagua/agesawrapper.h @@ -21,8 +21,8 @@ * M O D U L E S U S E D *---------------------------------------------------------------------------------------- */ - - + + #ifndef _AGESAWRAPPER_H_ #define _AGESAWRAPPER_H_
@@ -66,17 +66,17 @@ typedef struct { * P R O T O T Y P E S O F L O C A L F U N C T I O N S *---------------------------------------------------------------------------------------- */ - + /*---------------------------------------------------------------------------------------- * E X P O R T E D F U N C T I O N S *---------------------------------------------------------------------------------------- */ - + /*--------------------------------------------------------------------------------------- * L O C A L F U N C T I O N S *--------------------------------------------------------------------------------------- */ - + //void brazos_platform_stage(void); UINT32 agesawrapper_amdinitreset (void); UINT32 agesawrapper_amdinitearly (void); diff --git a/src/mainboard/amd/inagua/buildOpts.c b/src/mainboard/amd/inagua/buildOpts.c index 686f7fa..919f6be 100644 --- a/src/mainboard/amd/inagua/buildOpts.c +++ b/src/mainboard/amd/inagua/buildOpts.c @@ -16,7 +16,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ - + /** * @file * @@ -57,13 +57,13 @@ #define INSTALL_FT1_SOCKET_SUPPORT TRUE #define INSTALL_AM3_SOCKET_SUPPORT FALSE
-/* - * Agesa optional capabilities selection. +/* + * Agesa optional capabilities selection. * Uncomment and mark FALSE those features you wish to include in the build. * Comment out or mark TRUE those features you want to REMOVE from the build. */
-#define BLDOPT_REMOVE_FAMILY_10_SUPPORT TRUE +#define BLDOPT_REMOVE_FAMILY_10_SUPPORT TRUE #define BLDOPT_REMOVE_FAMILY_12_SUPPORT TRUE #define BLDOPT_REMOVE_FAMILY_14_SUPPORT FALSE #define BLDOPT_REMOVE_FAMILY_15_SUPPORT TRUE @@ -104,7 +104,7 @@ //#define BLDOPT_REMOVE_HT_ASSIST TRUE //#define BLDOPT_REMOVE_ATM_MODE TRUE //#define BLDOPT_REMOVE_MSG_BASED_C1E TRUE -//#define BLDOPT_REMOVE_LOW_POWER_STATE_FOR_PROCHOT TRUE +//#define BLDOPT_REMOVE_LOW_POWER_STATE_FOR_PROCHOT TRUE #define BLDOPT_REMOVE_MEM_RESTORE_SUPPORT FALSE //#define BLDOPT_REMOVE_C6_STATE TRUE //#define BLDOPT_REMOVE_GFX_RECOVERY TRUE @@ -125,10 +125,10 @@ #define AGESA_ENTRY_INIT_LATE_RESTORE FALSE #define AGESA_ENTRY_INIT_GENERAL_SERVICES TRUE
-/* - * Agesa configuration values selection. +/* + * Agesa configuration values selection. * Uncomment and specify the value for the configuration options - * needed by the system. + * needed by the system. */
/* The fixed MTRR values to be set after memory initialization. */ diff --git a/src/mainboard/amd/inagua/dimmSpd.c b/src/mainboard/amd/inagua/dimmSpd.c index d6bf5b2..d82cb5d 100644 --- a/src/mainboard/amd/inagua/dimmSpd.c +++ b/src/mainboard/amd/inagua/dimmSpd.c @@ -16,7 +16,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ - + #include "Porting.h" #include "AGESA.h" #include "amdlib.h" @@ -51,7 +51,7 @@ static int readSmbusByteData (int iobase, int address, char *buffer, int offset) UINT64 limit;
address |= 1; // set read bit - + __outbyte (iobase + 0, 0xFF); // clear error status __outbyte (iobase + 1, 0x1F); // clear error status __outbyte (iobase + 3, offset); // offset in eeprom @@ -108,7 +108,7 @@ static int readSmbusByte (int iobase, int address, char *buffer) * * readspd - Read one or more SPD bytes from a DIMM. * Start with offset zero and read sequentially. - * Optimization relies on autoincrement to avoid + * Optimization relies on autoincrement to avoid * sending offset for every byte. * Reads 128 bytes in 7-8 ms at 400 KHz. */ @@ -127,7 +127,7 @@ static int readspd (int iobase, int SmbusSlaveAddress, char *buffer, int count) error = readSmbusByte (iobase, SmbusSlaveAddress, &buffer [index]); if (error) return error; } - + return 0; }
@@ -150,11 +150,11 @@ AGESA_STATUS AmdMemoryReadSPD (UINT32 unused1, UINT32 unused2, AGESA_READ_SPD_PA { int spdAddress, ioBase;
- if (info->SocketId >= DIMENSION (spdAddressLookup )) return AGESA_ERROR; - if (info->MemChannelId >= DIMENSION (spdAddressLookup[0] )) return AGESA_ERROR; + if (info->SocketId >= DIMENSION (spdAddressLookup )) return AGESA_ERROR; + if (info->MemChannelId >= DIMENSION (spdAddressLookup[0] )) return AGESA_ERROR; if (info->DimmId >= DIMENSION (spdAddressLookup[0][0])) return AGESA_ERROR; - - spdAddress = spdAddressLookup [info->SocketId] [info->MemChannelId] [info->DimmId]; + + spdAddress = spdAddressLookup [info->SocketId] [info->MemChannelId] [info->DimmId]; if (spdAddress == 0) return AGESA_ERROR; ioBase = SMBUS_BASE_ADDR; setupFch (ioBase); diff --git a/src/mainboard/amd/inagua/dimmSpd.h b/src/mainboard/amd/inagua/dimmSpd.h old mode 100755 new mode 100644 diff --git a/src/mainboard/amd/inagua/get_bus_conf.c b/src/mainboard/amd/inagua/get_bus_conf.c index fedab75..ab58c99 100644 --- a/src/mainboard/amd/inagua/get_bus_conf.c +++ b/src/mainboard/amd/inagua/get_bus_conf.c @@ -79,22 +79,22 @@ void get_bus_conf(void) * This is the call to AmdInitLate. It is really in the wrong place, conceptually, * but functionally within the coreboot model, this is the best place to make the * call. The logically correct place to call AmdInitLate is after PCI scan is done, - * after the decision about S3 resume is made, and before the system tables are - * written into RAM. The routine that is responsible for writing the tables is - * "write_tables", called near the end of "hardwaremain". There is no platform - * specific entry point between the S3 resume decision point and the call to - * "write_tables", and the next platform specific entry points are the calls to - * the ACPI table write functions. The first of ose would seem to be the right - * place, but other table write functions, e.g. the PIRQ table write function, are + * after the decision about S3 resume is made, and before the system tables are + * written into RAM. The routine that is responsible for writing the tables is + * "write_tables", called near the end of "hardwaremain". There is no platform + * specific entry point between the S3 resume decision point and the call to + * "write_tables", and the next platform specific entry points are the calls to + * the ACPI table write functions. The first of ose would seem to be the right + * place, but other table write functions, e.g. the PIRQ table write function, are * called before the ACPI tables are written. This routine is called at the beginning * of each of the write functions called prior to the ACPI write functions, so this * becomes the best place for this call. */ - status = agesawrapper_amdinitlate(); + status = agesawrapper_amdinitlate(); if(status) { printk(BIOS_DEBUG, "agesawrapper_amdinitlate failed: %x \n", status); } - + sbdn_sb800 = 0;
for (i = 0; i < 3; i++) { diff --git a/src/mainboard/amd/inagua/mptable.c b/src/mainboard/amd/inagua/mptable.c index fa7de7d..7278936 100644 --- a/src/mainboard/amd/inagua/mptable.c +++ b/src/mainboard/amd/inagua/mptable.c @@ -37,15 +37,15 @@ extern u32 sbdn_sb800; u32 apicid_sb800;
u8 picr_data[] = { - 0x0B,0x0A,0x0B,0x05,0x1F,0x1F,0x1F,0x1F,0x50,0xF1,0x00,0x00,0x1F,0x1F,0x1F,0x1F, - 0x1F,0x1F,0x1F,0x0B,0x1F,0x0B,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x0B,0x0A,0x0B,0x05,0x1F,0x1F,0x1F,0x1F,0x50,0xF1,0x00,0x00,0x1F,0x1F,0x1F,0x1F, + 0x1F,0x1F,0x1F,0x0B,0x1F,0x0B,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x0B,0x0A,0x0B,0x0A,0x0B,0x0A,0x0B,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x0A,0x05,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x0B,0x0A,0x0B,0x05 }; u8 intr_data[] = { - 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F, + 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F, 0x1F,0x1F,0x1F,0x10,0x1F,0x12,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x05,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x12,0x11,0x12,0x11,0x12,0x11,0x12,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, @@ -96,7 +96,7 @@ static void *smp_write_config_table(void *v) 0, apic_version, cpu_flag, cpu_features, cpu_feature_flags ); - + cpu_flag = MPC_CPU_ENABLED; smp_write_processor(mc, 1, apic_version, @@ -112,11 +112,11 @@ static void *smp_write_config_table(void *v) my_smp_write_bus(mc, bus_isa, "ISA ");
/* I/O APICs: APIC ID Version State Address */ - + device_t dev; u32 dword; u8 byte; - + ReadPMIO(SB_PMIOA_REG34, AccWidthUint32, &dword); dword &= 0xFFFFFFF0; /* Set IO APIC ID onto IO_APIC_ID */ @@ -124,13 +124,13 @@ static void *smp_write_config_table(void *v) write32 (dword + 0x10, IO_APIC_ID << 24); apicid_sb800 = IO_APIC_ID; smp_write_ioapic(mc, apicid_sb800, 0x21, dword); - + /* PIC IRQ routine */ for (byte = 0x0; byte < sizeof(picr_data); byte ++) { outb(byte, 0xC00); outb(picr_data[byte], 0xC01); } - + /* APIC IRQ routine */ for (byte = 0x0; byte < sizeof(intr_data); byte ++) { outb(byte | 0x80, 0xC00); @@ -168,12 +168,12 @@ static void *smp_write_config_table(void *v)
/* SMBUS */ PCI_INT(0x0, 0x14, 0x0, 0x10); - + /* HD Audio */ PCI_INT(0x0, 0x14, 0x0, intr_data[0x13]); - + /* USB */ - PCI_INT(0x0, 0x12, 0x0, intr_data[0x30]); + PCI_INT(0x0, 0x12, 0x0, intr_data[0x30]); PCI_INT(0x0, 0x12, 0x1, intr_data[0x31]); PCI_INT(0x0, 0x13, 0x0, intr_data[0x32]); PCI_INT(0x0, 0x13, 0x1, intr_data[0x33]); @@ -187,7 +187,7 @@ static void *smp_write_config_table(void *v)
/* on board NIC & Slot PCIE. */ - + /* PCI slots */ /* PCI_SLOT 0. */ PCI_INT(bus_sb800[1], 0x5, 0x0, 0x14); diff --git a/src/mainboard/amd/persimmon/BiosCallOuts.c b/src/mainboard/amd/persimmon/BiosCallOuts.c index 3fb0e87..3cfd741 100644 --- a/src/mainboard/amd/persimmon/BiosCallOuts.c +++ b/src/mainboard/amd/persimmon/BiosCallOuts.c @@ -91,7 +91,7 @@ AGESA_STATUS GetBiosCallout (UINT32 Func, UINT32 Data, VOID *ConfigPtr) return CalloutStatus; } } - + return CalloutStatus; }
@@ -289,7 +289,7 @@ AGESA_STATUS BiosDeallocateBuffer (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
} else { /* Otherwise, add freed node to the start of the list - Update NextNodeOffset and BufferSize to include the + Update NextNodeOffset and BufferSize to include the size of BIOS_BUFFER_NODE */ AllocNodePtr->NextNodeOffset = FreedNodeOffset; @@ -470,7 +470,7 @@ AGESA_STATUS BiosHookBeforeDramInit (UINT32 Func, UINT32 Data, VOID *ConfigPtr) TempData8 &= 0x03; TempData8 |= Data8; Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, TempData8); - + Data8 |= BIT2+BIT3; Data8 &= ~BIT4; TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178); @@ -563,13 +563,13 @@ AGESA_STATUS BiosGnbPcieSlotReset (UINT32 Func, UINT32 Data, VOID *ConfigPtr) { case AssertSlotReset: Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG21); - Data8 &= ~(UINT8)BIT6 ; + Data8 &= ~(UINT8)BIT6 ; Write64Mem8(GpioMmioAddr+SB_GPIO_REG21, Data8); // MXM_GPIO0. GPIO21 Status = AGESA_SUCCESS; break; case DeassertSlotReset: Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG21); - Data8 |= BIT6 ; + Data8 |= BIT6 ; Write64Mem8 (GpioMmioAddr+SB_GPIO_REG21, Data8); // MXM_GPIO0. GPIO21 Status = AGESA_SUCCESS; break; @@ -586,7 +586,7 @@ AGESA_STATUS BiosGnbPcieSlotReset (UINT32 Func, UINT32 Data, VOID *ConfigPtr) break; case DeassertSlotReset: Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG25); - Data8 |= BIT6 ; + Data8 |= BIT6 ; Write64Mem8 (GpioMmioAddr+SB_GPIO_REG25, Data8); // PCIE_RST#_LAN, GPIO25 Status = AGESA_SUCCESS; break; diff --git a/src/mainboard/amd/persimmon/BiosCallOuts.h b/src/mainboard/amd/persimmon/BiosCallOuts.h index b187fa2..b7c7883 100644 --- a/src/mainboard/amd/persimmon/BiosCallOuts.h +++ b/src/mainboard/amd/persimmon/BiosCallOuts.h @@ -16,7 +16,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ - + #ifndef _BIOS_CALLOUT_H_ #define _BIOS_CALLOUT_H_
diff --git a/src/mainboard/amd/persimmon/PlatformGnbPcie.c b/src/mainboard/amd/persimmon/PlatformGnbPcie.c index 59d31ef..b0389b8 100644 --- a/src/mainboard/amd/persimmon/PlatformGnbPcie.c +++ b/src/mainboard/amd/persimmon/PlatformGnbPcie.c @@ -86,7 +86,7 @@ PCIe_PORT_DESCRIPTOR PortList [] = { DESCRIPTOR_TERMINATE_LIST, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 0, 3), PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT8_PORT_PRESENT, GNB_GPP_PORT8_CHANNEL_TYPE, 8, GNB_GPP_PORT8_HOTPLUG_SUPPORT, GNB_GPP_PORT8_SPEED_MODE, GNB_GPP_PORT8_SPEED_MODE, GNB_GPP_PORT8_LINK_ASPM, 0) - } + } };
PCIe_DDI_DESCRIPTOR DdiList [] = { @@ -118,8 +118,8 @@ PCIe_COMPLEX_DESCRIPTOR Brazos = { // // Allocate buffer for PCIe_COMPLEX_DESCRIPTOR , PCIe_PORT_DESCRIPTOR and PCIe_DDI_DESCRIPTOR // - AllocHeapParams.RequestedBufferSize = (sizeof (PCIe_COMPLEX_DESCRIPTOR) + - sizeof (PCIe_PORT_DESCRIPTOR) * 5 + + AllocHeapParams.RequestedBufferSize = (sizeof (PCIe_COMPLEX_DESCRIPTOR) + + sizeof (PCIe_PORT_DESCRIPTOR) * 5 + sizeof (PCIe_DDI_DESCRIPTOR)) * 2;
AllocHeapParams.BufferHandle = AMD_MEM_MISC_HANDLES_START; @@ -127,10 +127,10 @@ PCIe_COMPLEX_DESCRIPTOR Brazos = { Status = HeapAllocateBuffer (&AllocHeapParams, &InitEarly->StdHeader); if ( Status!= AGESA_SUCCESS) { // Could not allocate buffer for PCIe_COMPLEX_DESCRIPTOR , PCIe_PORT_DESCRIPTOR and PCIe_DDI_DESCRIPTOR - ASSERT(FALSE); + ASSERT(FALSE); return; } - + BrazosPcieComplexListPtr = (PCIe_COMPLEX_DESCRIPTOR *) AllocHeapParams.BufferPtr;
AllocHeapParams.BufferPtr += sizeof (PCIe_COMPLEX_DESCRIPTOR); @@ -138,7 +138,7 @@ PCIe_COMPLEX_DESCRIPTOR Brazos = {
AllocHeapParams.BufferPtr += sizeof (PCIe_PORT_DESCRIPTOR) * 5; BrazosPcieDdiPtr = (PCIe_DDI_DESCRIPTOR *) AllocHeapParams.BufferPtr; - + LibAmdMemFill (BrazosPcieComplexListPtr, 0, sizeof (PCIe_COMPLEX_DESCRIPTOR), @@ -148,7 +148,7 @@ PCIe_COMPLEX_DESCRIPTOR Brazos = { 0, sizeof (PCIe_PORT_DESCRIPTOR) * 5, &InitEarly->StdHeader); - + LibAmdMemFill (BrazosPcieDdiPtr, 0, sizeof (PCIe_DDI_DESCRIPTOR) * 2, @@ -162,7 +162,7 @@ PCIe_COMPLEX_DESCRIPTOR Brazos = { ((PCIe_COMPLEX_DESCRIPTOR*)BrazosPcieComplexListPtr)->PciePortList = (PCIe_PORT_DESCRIPTOR*)BrazosPciePortPtr; ((PCIe_COMPLEX_DESCRIPTOR*)BrazosPcieComplexListPtr)->DdiLinkList = (PCIe_DDI_DESCRIPTOR*)BrazosPcieDdiPtr;
- InitEarly->GnbConfig.PcieComplexList = BrazosPcieComplexListPtr; - InitEarly->GnbConfig.PsppPolicy = 0; + InitEarly->GnbConfig.PcieComplexList = BrazosPcieComplexListPtr; + InitEarly->GnbConfig.PsppPolicy = 0; }
diff --git a/src/mainboard/amd/persimmon/PlatformGnbPcieComplex.h b/src/mainboard/amd/persimmon/PlatformGnbPcieComplex.h index f35d8db..b51089f 100644 --- a/src/mainboard/amd/persimmon/PlatformGnbPcieComplex.h +++ b/src/mainboard/amd/persimmon/PlatformGnbPcieComplex.h @@ -25,42 +25,42 @@ #include "amdlib.h"
//GNB GPP Port4 -#define GNB_GPP_PORT4_PORT_PRESENT 1 //0:Disable 1:Enable +#define GNB_GPP_PORT4_PORT_PRESENT 1 //0:Disable 1:Enable #define GNB_GPP_PORT4_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2 #define GNB_GPP_PORT4_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1 -#define GNB_GPP_PORT4_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) +#define GNB_GPP_PORT4_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db) #define GNB_GPP_PORT4_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced
//GNB GPP Port5 -#define GNB_GPP_PORT5_PORT_PRESENT 1 //0:Disable 1:Enable +#define GNB_GPP_PORT5_PORT_PRESENT 1 //0:Disable 1:Enable #define GNB_GPP_PORT5_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2 #define GNB_GPP_PORT5_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1 -#define GNB_GPP_PORT5_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) +#define GNB_GPP_PORT5_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db) #define GNB_GPP_PORT5_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced
//GNB GPP Port6 -#define GNB_GPP_PORT6_PORT_PRESENT 1 //0:Disable 1:Enable +#define GNB_GPP_PORT6_PORT_PRESENT 1 //0:Disable 1:Enable #define GNB_GPP_PORT6_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2 #define GNB_GPP_PORT6_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1 -#define GNB_GPP_PORT6_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) +#define GNB_GPP_PORT6_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db) #define GNB_GPP_PORT6_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced
//GNB GPP Port7 -#define GNB_GPP_PORT7_PORT_PRESENT 1 //0:Disable 1:Enable +#define GNB_GPP_PORT7_PORT_PRESENT 1 //0:Disable 1:Enable #define GNB_GPP_PORT7_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2 #define GNB_GPP_PORT7_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1 -#define GNB_GPP_PORT7_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) +#define GNB_GPP_PORT7_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db) #define GNB_GPP_PORT7_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced
//GNB GPP Port8 -#define GNB_GPP_PORT8_PORT_PRESENT 1 //0:Disable 1:Enable +#define GNB_GPP_PORT8_PORT_PRESENT 1 //0:Disable 1:Enable #define GNB_GPP_PORT8_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2 #define GNB_GPP_PORT8_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1 -#define GNB_GPP_PORT8_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) +#define GNB_GPP_PORT8_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db) #define GNB_GPP_PORT8_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced
@@ -68,5 +68,5 @@ VOID OemCustomizeInitEarly ( IN OUT AMD_EARLY_PARAMS *InitEarly ); - + #endif //_PLATFORM_GNB_PCIE_COMPLEX_H diff --git a/src/mainboard/amd/persimmon/agesawrapper.c b/src/mainboard/amd/persimmon/agesawrapper.c index 74aa73d..9d9f864 100644 --- a/src/mainboard/amd/persimmon/agesawrapper.c +++ b/src/mainboard/amd/persimmon/agesawrapper.c @@ -86,11 +86,11 @@ agesawrapper_amdinitcpuio ( UINT32 PciData; PCI_ADDR PciAddress; AMD_CONFIG_PARAMS StdHeader; - + /* Enable legacy video routing: D18F1xF4 VGA Enable */ PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xF4); PciData = 1; - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
/* The platform BIOS needs to ensure the memory ranges of SB800 legacy * devices (TPM, HPET, BIOS RAM, Watchdog Timer, I/O APIC and ACPI) are @@ -99,21 +99,21 @@ agesawrapper_amdinitcpuio ( PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x84); PciData = 0x00FEDF00; // last address before processor local APIC at FEE00000 PciData |= 1 << 7; // set NP (non-posted) bit - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x80); PciData = (0xFED00000 >> 8) | 3; // lowest NP address is HPET at FED00000 - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + /* Map the remaining PCI hole as posted MMIO */ PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x8C); PciData = 0x00FECF00; // last address before non-posted range - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); LibAmdMsrRead (0xC001001A, &MsrReg, &StdHeader); MsrReg = (MsrReg >> 8) | 3; PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x88); PciData = (UINT32)MsrReg; - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + /* Send all IO (0000-FFFF) to southbridge. */ PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xC4); PciData = 0x0000F000; @@ -135,7 +135,7 @@ agesawrapper_amdinitmmio ( UINT32 PciData; PCI_ADDR PciAddress; AMD_CONFIG_PARAMS StdHeader; - + UINT8 BusRangeVal = 0; UINT8 BusNum; UINT8 Index; @@ -166,10 +166,10 @@ agesawrapper_amdinitmmio ( /* Set Ontario Link Data */ PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0, 0, 0xE0); PciData = 0x01308002; - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0, 0, 0xE4); PciData = (AMD_APU_SSID<<0x10)|AMD_APU_SVID; - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
Status = AGESA_SUCCESS; return (UINT32)Status; @@ -313,7 +313,7 @@ agesawrapper_amdinitenv ( /* Initialize Subordinate Bus Number and Secondary Bus Number * In platform BIOS this address is allocated by PCI enumeration code Modify D1F0x18 - */ + */ PciAddress.Address.Bus = 0; PciAddress.Address.Device = 1; PciAddress.Address.Function = 0; @@ -480,10 +480,10 @@ agesawrapper_amdinitlate ( return (UINT32)Status; }
-UINT32 +UINT32 agesawrapper_amdlaterunaptask ( - UINT32 Func, - UINT32 Data, + UINT32 Func, + UINT32 Data, VOID *ConfigPtr ) { diff --git a/src/mainboard/amd/persimmon/dimmSpd.c b/src/mainboard/amd/persimmon/dimmSpd.c index 9da0e0e..2bd27d6 100644 --- a/src/mainboard/amd/persimmon/dimmSpd.c +++ b/src/mainboard/amd/persimmon/dimmSpd.c @@ -16,7 +16,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ - + #include "Porting.h" #include "AGESA.h" #include "amdlib.h" @@ -55,7 +55,7 @@ static int readSmbusByteData (int iobase, int address, char *buffer, int offset) UINT64 limit;
address |= 1; // set read bit - + __outbyte (iobase + 0, 0xFF); // clear error status __outbyte (iobase + 1, 0x1F); // clear error status __outbyte (iobase + 3, offset); // offset in eeprom @@ -112,7 +112,7 @@ static int readSmbusByte (int iobase, int address, char *buffer) * * readspd - Read one or more SPD bytes from a DIMM. * Start with offset zero and read sequentially. - * Optimization relies on autoincrement to avoid + * Optimization relies on autoincrement to avoid * sending offset for every byte. * Reads 128 bytes in 7-8 ms at 400 KHz. */ @@ -131,7 +131,7 @@ static int readspd (int iobase, int SmbusSlaveAddress, char *buffer, int count) error = readSmbusByte (iobase, SmbusSlaveAddress, &buffer [index]); if (error) return error; } - + return 0; }
@@ -154,11 +154,11 @@ AGESA_STATUS AmdMemoryReadSPD (UINT32 unused1, UINT32 unused2, AGESA_READ_SPD_PA { int spdAddress, ioBase;
- if (info->SocketId >= DIMENSION (spdAddressLookup )) return AGESA_ERROR; - if (info->MemChannelId >= DIMENSION (spdAddressLookup[0] )) return AGESA_ERROR; + if (info->SocketId >= DIMENSION (spdAddressLookup )) return AGESA_ERROR; + if (info->MemChannelId >= DIMENSION (spdAddressLookup[0] )) return AGESA_ERROR; if (info->DimmId >= DIMENSION (spdAddressLookup[0][0])) return AGESA_ERROR; - - spdAddress = spdAddressLookup [info->SocketId] [info->MemChannelId] [info->DimmId]; + + spdAddress = spdAddressLookup [info->SocketId] [info->MemChannelId] [info->DimmId]; if (spdAddress == 0) return AGESA_ERROR; ioBase = 0xB00; setupFch (ioBase); diff --git a/src/mainboard/amd/persimmon/dimmSpd.h b/src/mainboard/amd/persimmon/dimmSpd.h old mode 100755 new mode 100644 diff --git a/src/mainboard/amd/persimmon/get_bus_conf.c b/src/mainboard/amd/persimmon/get_bus_conf.c index 4bc5b48..2d28023 100644 --- a/src/mainboard/amd/persimmon/get_bus_conf.c +++ b/src/mainboard/amd/persimmon/get_bus_conf.c @@ -69,22 +69,22 @@ void get_bus_conf(void) * This is the call to AmdInitLate. It is really in the wrong place, conceptually, * but functionally within the coreboot model, this is the best place to make the * call. The logically correct place to call AmdInitLate is after PCI scan is done, - * after the decision about S3 resume is made, and before the system tables are - * written into RAM. The routine that is responsible for writing the tables is - * "write_tables", called near the end of "hardwaremain". There is no platform - * specific entry point between the S3 resume decision point and the call to - * "write_tables", and the next platform specific entry points are the calls to - * the ACPI table write functions. The first of ose would seem to be the right - * place, but other table write functions, e.g. the PIRQ table write function, are + * after the decision about S3 resume is made, and before the system tables are + * written into RAM. The routine that is responsible for writing the tables is + * "write_tables", called near the end of "hardwaremain". There is no platform + * specific entry point between the S3 resume decision point and the call to + * "write_tables", and the next platform specific entry points are the calls to + * the ACPI table write functions. The first of ose would seem to be the right + * place, but other table write functions, e.g. the PIRQ table write function, are * called before the ACPI tables are written. This routine is called at the beginning * of each of the write functions called prior to the ACPI write functions, so this * becomes the best place for this call. */ - status = agesawrapper_amdinitlate(); + status = agesawrapper_amdinitlate(); if(status) { printk(BIOS_DEBUG, "agesawrapper_amdinitlate failed: %x \n", status); } - + sbdn_sb800 = 0;
for (i = 0; i < 3; i++) { diff --git a/src/mainboard/amd/persimmon/mptable.c b/src/mainboard/amd/persimmon/mptable.c index a3b4b5c..546d9bd 100644 --- a/src/mainboard/amd/persimmon/mptable.c +++ b/src/mainboard/amd/persimmon/mptable.c @@ -61,10 +61,10 @@ static void *smp_write_config_table(void *v) mptable_write_buses(mc, NULL, &bus_isa);
/* I/O APICs: APIC ID Version State Address */ - + u32 dword; u8 byte; - + ReadPMIO(SB_PMIOA_REG34, AccWidthUint32, &dword); dword &= 0xFFFFFFF0; smp_write_ioapic(mc, apicid_sb800, 0x21, dword); @@ -108,7 +108,7 @@ static void *smp_write_config_table(void *v) /* PCI_INT(0x0, 0x14, 0x2, 0x12); */
/* on board NIC & Slot PCIE. */ - + /* PCI slots */ /* PCI_SLOT 0. */ PCI_INT(bus_sb800[1], 0x5, 0x0, 0x14); diff --git a/src/mainboard/amd/serengeti_cheetah/ap_romstage.c b/src/mainboard/amd/serengeti_cheetah/ap_romstage.c index 126b464..65ac2e6 100644 --- a/src/mainboard/amd/serengeti_cheetah/ap_romstage.c +++ b/src/mainboard/amd/serengeti_cheetah/ap_romstage.c @@ -57,7 +57,7 @@ void hardwaremain(int ret_addr) train_ram(id.nodeid, sysinfo, sysinfox);
/* - * go back, but can not use stack any more, because we + * go back, but can not use stack any more, because we * only keep ret_addr and can not restore esp, and ebp. */
diff --git a/src/mainboard/amd/tilapia_fam10/mainboard.c b/src/mainboard/amd/tilapia_fam10/mainboard.c old mode 100755 new mode 100644 diff --git a/src/mainboard/amd/tilapia_fam10/romstage.c b/src/mainboard/amd/tilapia_fam10/romstage.c old mode 100755 new mode 100644 diff --git a/src/mainboard/amd/torpedo/BiosCallOuts.c b/src/mainboard/amd/torpedo/BiosCallOuts.c old mode 100755 new mode 100644 diff --git a/src/mainboard/amd/torpedo/BiosCallOuts.h b/src/mainboard/amd/torpedo/BiosCallOuts.h old mode 100755 new mode 100644 diff --git a/src/mainboard/amd/torpedo/Oem.h b/src/mainboard/amd/torpedo/Oem.h old mode 100755 new mode 100644 diff --git a/src/mainboard/amd/torpedo/OptionsIds.h b/src/mainboard/amd/torpedo/OptionsIds.h old mode 100755 new mode 100644 diff --git a/src/mainboard/amd/torpedo/PlatformGnbPcie.c b/src/mainboard/amd/torpedo/PlatformGnbPcie.c old mode 100755 new mode 100644 diff --git a/src/mainboard/amd/torpedo/PlatformGnbPcieComplex.h b/src/mainboard/amd/torpedo/PlatformGnbPcieComplex.h old mode 100755 new mode 100644 index f35d8db..b51089f --- a/src/mainboard/amd/torpedo/PlatformGnbPcieComplex.h +++ b/src/mainboard/amd/torpedo/PlatformGnbPcieComplex.h @@ -25,42 +25,42 @@ #include "amdlib.h"
//GNB GPP Port4 -#define GNB_GPP_PORT4_PORT_PRESENT 1 //0:Disable 1:Enable +#define GNB_GPP_PORT4_PORT_PRESENT 1 //0:Disable 1:Enable #define GNB_GPP_PORT4_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2 #define GNB_GPP_PORT4_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1 -#define GNB_GPP_PORT4_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) +#define GNB_GPP_PORT4_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db) #define GNB_GPP_PORT4_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced
//GNB GPP Port5 -#define GNB_GPP_PORT5_PORT_PRESENT 1 //0:Disable 1:Enable +#define GNB_GPP_PORT5_PORT_PRESENT 1 //0:Disable 1:Enable #define GNB_GPP_PORT5_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2 #define GNB_GPP_PORT5_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1 -#define GNB_GPP_PORT5_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) +#define GNB_GPP_PORT5_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db) #define GNB_GPP_PORT5_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced
//GNB GPP Port6 -#define GNB_GPP_PORT6_PORT_PRESENT 1 //0:Disable 1:Enable +#define GNB_GPP_PORT6_PORT_PRESENT 1 //0:Disable 1:Enable #define GNB_GPP_PORT6_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2 #define GNB_GPP_PORT6_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1 -#define GNB_GPP_PORT6_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) +#define GNB_GPP_PORT6_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db) #define GNB_GPP_PORT6_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced
//GNB GPP Port7 -#define GNB_GPP_PORT7_PORT_PRESENT 1 //0:Disable 1:Enable +#define GNB_GPP_PORT7_PORT_PRESENT 1 //0:Disable 1:Enable #define GNB_GPP_PORT7_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2 #define GNB_GPP_PORT7_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1 -#define GNB_GPP_PORT7_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) +#define GNB_GPP_PORT7_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db) #define GNB_GPP_PORT7_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced
//GNB GPP Port8 -#define GNB_GPP_PORT8_PORT_PRESENT 1 //0:Disable 1:Enable +#define GNB_GPP_PORT8_PORT_PRESENT 1 //0:Disable 1:Enable #define GNB_GPP_PORT8_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2 #define GNB_GPP_PORT8_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1 -#define GNB_GPP_PORT8_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) +#define GNB_GPP_PORT8_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db) #define GNB_GPP_PORT8_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced
@@ -68,5 +68,5 @@ VOID OemCustomizeInitEarly ( IN OUT AMD_EARLY_PARAMS *InitEarly ); - + #endif //_PLATFORM_GNB_PCIE_COMPLEX_H diff --git a/src/mainboard/amd/torpedo/acpi_tables.c b/src/mainboard/amd/torpedo/acpi_tables.c old mode 100755 new mode 100644 index 7f4f2d9..4710b57 --- a/src/mainboard/amd/torpedo/acpi_tables.c +++ b/src/mainboard/amd/torpedo/acpi_tables.c @@ -62,13 +62,13 @@ unsigned long acpi_fill_mcfg(unsigned long current)
unsigned long acpi_fill_madt(unsigned long current) { - + /* create all subtables for processors */ current += acpi_create_madt_lapic((acpi_madt_lapic_t *)current, 0, 0); current += acpi_create_madt_lapic((acpi_madt_lapic_t *)current, 1, 1); current += acpi_create_madt_lapic((acpi_madt_lapic_t *)current, 2, 2); current += acpi_create_madt_lapic((acpi_madt_lapic_t *)current, 3, 3); - + /* Write SB900 IOAPIC, only one */ current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, apicid_sb900, IO_APIC_ADDR, 0); @@ -77,7 +77,7 @@ unsigned long acpi_fill_madt(unsigned long current) current, 0, 0, 2, 0); current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) current, 0, 9, 9, 0xF); - + /* 0: mean bus 0--->ISA */ /* 0: PIC 0 */ /* 2: APIC 2 */ diff --git a/src/mainboard/amd/torpedo/agesawrapper.c b/src/mainboard/amd/torpedo/agesawrapper.c old mode 100755 new mode 100644 diff --git a/src/mainboard/amd/torpedo/agesawrapper.h b/src/mainboard/amd/torpedo/agesawrapper.h old mode 100755 new mode 100644 diff --git a/src/mainboard/amd/torpedo/buildOpts.c b/src/mainboard/amd/torpedo/buildOpts.c old mode 100755 new mode 100644 diff --git a/src/mainboard/amd/torpedo/chip.h b/src/mainboard/amd/torpedo/chip.h old mode 100755 new mode 100644 diff --git a/src/mainboard/amd/torpedo/dimmSpd.c b/src/mainboard/amd/torpedo/dimmSpd.c old mode 100755 new mode 100644 diff --git a/src/mainboard/amd/torpedo/dimmSpd.h b/src/mainboard/amd/torpedo/dimmSpd.h old mode 100755 new mode 100644 diff --git a/src/mainboard/amd/torpedo/fadt.c b/src/mainboard/amd/torpedo/fadt.c old mode 100755 new mode 100644 diff --git a/src/mainboard/amd/torpedo/get_bus_conf.c b/src/mainboard/amd/torpedo/get_bus_conf.c old mode 100755 new mode 100644 index f9b4c84..13019ff --- a/src/mainboard/amd/torpedo/get_bus_conf.c +++ b/src/mainboard/amd/torpedo/get_bus_conf.c @@ -79,23 +79,23 @@ void get_bus_conf(void) * This is the call to AmdInitLate. It is really in the wrong place, conceptually, * but functionally within the coreboot model, this is the best place to make the * call. The logically correct place to call AmdInitLate is after PCI scan is done, - * after the decision about S3 resume is made, and before the system tables are - * written into RAM. The routine that is responsible for writing the tables is - * "write_tables", called near the end of "hardwaremain". There is no platform - * specific entry point between the S3 resume decision point and the call to - * "write_tables", and the next platform specific entry points are the calls to - * the ACPI table write functions. The first of ose would seem to be the right - * place, but other table write functions, e.g. the PIRQ table write function, are + * after the decision about S3 resume is made, and before the system tables are + * written into RAM. The routine that is responsible for writing the tables is + * "write_tables", called near the end of "hardwaremain". There is no platform + * specific entry point between the S3 resume decision point and the call to + * "write_tables", and the next platform specific entry points are the calls to + * the ACPI table write functions. The first of ose would seem to be the right + * place, but other table write functions, e.g. the PIRQ table write function, are * called before the ACPI tables are written. This routine is called at the beginning * of each of the write functions called prior to the ACPI write functions, so this * becomes the best place for this call. */ - status = agesawrapper_amdinitlate(); + status = agesawrapper_amdinitlate(); if(status) { printk(BIOS_DEBUG, "agesawrapper_amdinitlate failed: %x \n", status); } printk(BIOS_DEBUG, "Got past agesawrapper_amdinitlate\n"); - + sbdn_sb900 = 0;
for (i = 0; i < 3; i++) { diff --git a/src/mainboard/amd/torpedo/gpio.c b/src/mainboard/amd/torpedo/gpio.c old mode 100755 new mode 100644 index 14dcd2c..2633fb5 --- a/src/mainboard/amd/torpedo/gpio.c +++ b/src/mainboard/amd/torpedo/gpio.c @@ -21,7 +21,7 @@ * M O D U L E S U S E D *---------------------------------------------------------------------------------------- */ - + #include "Filecode.h" #include "Hudson-2.h" #include "AmdSbLib.h" @@ -63,12 +63,12 @@ *---------------------------------------------------------------------------------------- */ void gpioEarlyInit (void); - + /*---------------------------------------------------------------------------------------- * E X P O R T E D F U N C T I O N S *---------------------------------------------------------------------------------------- */ - + /*--------------------------------------------------------------------------------------- * L O C A L F U N C T I O N S *--------------------------------------------------------------------------------------- @@ -98,7 +98,7 @@ gpioEarlyInit( Data8 |= BIT0; WritePMIO (SB_PMIOA_REG24, AccWidthUint8, &Data8); // Get HUDSON MMIO Base (AcpiMmioAddr) - ReadPMIO (SB_PMIOA_REG24 + 3, AccWidthUint8, &Data8); + ReadPMIO (SB_PMIOA_REG24 + 3, AccWidthUint8, &Data8); Data16 = Data8 << 8; ReadPMIO (SB_PMIOA_REG24 + 2, AccWidthUint8, &Data8); Data16 |= Data8; @@ -113,14 +113,14 @@ gpioEarlyInit( Data8 = Mmio8_G (GpioMmioAddr, GPIO_30); StripInfo = (Data8 & BIT7) >> 7; Data8 = Mmio8_G (GpioMmioAddr, GPIO_31); - StripInfo |= (Data8 & BIT7) >> 6; - if (StripInfo < boardRevC) { // for old board. Rev B + StripInfo |= (Data8 & BIT7) >> 6; + if (StripInfo < boardRevC) { // for old board. Rev B Mmio8_And_Or (IoMuxMmioAddr, GPIO_111, 0x00, 3); // function 3 - Mmio8_And_Or (IoMuxMmioAddr, GPIO_113, 0x00, 0); // function 0 + Mmio8_And_Or (IoMuxMmioAddr, GPIO_113, 0x00, 0); // function 0 } for (Index = 0; Index < MAX_GPIO_NO; Index++) { if (!(((Index >= GPIO_RSVD_ZONE0_S) && (Index <= GPIO_RSVD_ZONE0_E)) || ((Index >= GPIO_RSVD_ZONE1_S) && (Index <= GPIO_RSVD_ZONE1_E)))) { - if ((StripInfo >= boardRevC) || ((Index != GPIO_111) && (Index != GPIO_113))) { + if ((StripInfo >= boardRevC) || ((Index != GPIO_111) && (Index != GPIO_113))) { // Configure multi-funtion Mmio8_And_Or (IoMuxMmioAddr, Index, 0x00, (gpio_table[Index].select & ~NonGpio)); } @@ -138,7 +138,7 @@ gpioEarlyInit( // Configure GEVENT if ((Index >= GEVENT_00) && (Index <= GEVENT_23) && ((gevent_table[Index - GEVENT_00].EventEnable))) { SmiMmioAddr = AcpiMmioAddr + SMI_BASE; - + andMask32 = ~(1 << (Index - GEVENT_00));
//EventEnable: 0-Disable, 1-Enable @@ -159,12 +159,12 @@ gpioEarlyInit( //SciMap: 00000b ~ 11111b RegIndex8=(u8)((Index - GEVENT_00) >> 2); Data8=(u8)(((Index - GEVENT_00) & 0x3) * 8); - Mmio32_And_Or (SmiMmioAddr, SMIREG_SCIMAP0+RegIndex8, ~(GEVENT_SCIMASK << Data8), (gevent_table[Index - GEVENT_00].SciMap << Data8)); - + Mmio32_And_Or (SmiMmioAddr, SMIREG_SCIMAP0+RegIndex8, ~(GEVENT_SCIMASK << Data8), (gevent_table[Index - GEVENT_00].SciMap << Data8)); + //SmiTrig: 0-Active Low, 1-Active High Mmio32_And_Or (SmiMmioAddr, SMIREG_SMITRIG, ~(gevent_table[Index - GEVENT_00].SmiTrig << (Index - GEVENT_00)), (gevent_table[Index - GEVENT_00].SmiTrig << (Index - GEVENT_00))); - - //SmiControl: 0-Disable, 1-SMI, 2-NMI, 3-IRQ13 + + //SmiControl: 0-Disable, 1-SMI, 2-NMI, 3-IRQ13 RegIndex8=(u8)((Index - GEVENT_00) >> 4); Data8=(u8)(((Index - GEVENT_00) & 0xF) * 2); Mmio32_And_Or (SmiMmioAddr, SMIREG_SMICONTROL0+RegIndex8, ~(SMICONTROL_MASK << Data8), (gevent_table[Index - GEVENT_00].SmiControl << Data8)); @@ -180,7 +180,7 @@ gpioEarlyInit( // GPIO45: Output for MXM Power Enable, active HIGH // GPIO55: Output for MXM_PWR_EN, 1 - Enable, 0 - Disable // GPIO32: Output for PCIE_SW, 1 - MXM, 0 - LASSO - // + // // set INTE#/GPIO32 as GPO for PCIE_SW RWMEM (IoMuxMmioAddr + SB_GPIO_REG32, AccWidthUint8, 00, 0x1); // GPIO RWMEM (GpioMmioAddr + SB_GPIO_REG32, AccWidthUint8, 0x03, 0); // GPO @@ -224,7 +224,7 @@ gpioEarlyInit( //Fusion_Llano BLWriteNBMISC_Dword (ATI_MISC_REG42, (BLReadNBMISC_Dword (ATI_MISC_REG42) | BIT20)); //Fusion_Llano BLWriteNBMISC_Dword (ATI_MISC_REG40, (BLReadNBMISC_Dword (ATI_MISC_REG40) & (~BIT20)));
- // check if there any GFX card + // check if there any GFX card Flags = 0; // Value32 = MmPci32 (0, SB_ISA_BUS, SB_ISA_DEV, SB_ISA_FUNC, R_SB_ISA_GPIO_CONTROL); // Data8 = Mmio8 (GpioMmioAddr, SB_GPIO_REG09); @@ -244,13 +244,13 @@ gpioEarlyInit( RWMEM (GpioMmioAddr + SB_GPIO_REG44, AccWidthUint8, 0xBF, 0);
// [GPIO] GPIO45: PE_GPIO1 MXM_POWER_ENABLE, SET HIGH - RWMEM (GpioMmioAddr + SB_GPIO_REG45, AccWidthUint8, 0xFF, BIT6); - - //PeiStall (PeiServices, NULL, 100); //delay 100 ms (should be >1ms) + RWMEM (GpioMmioAddr + SB_GPIO_REG45, AccWidthUint8, 0xFF, BIT6); + + //PeiStall (PeiServices, NULL, 100); //delay 100 ms (should be >1ms) SbStall (10000);
// Write the GPIO55(MXM_PWR_EN) to enable the integrated power module - RWMEM (GpioMmioAddr + SB_GPIO_REG55, AccWidthUint8, 0xFF, BIT6); + RWMEM (GpioMmioAddr + SB_GPIO_REG55, AccWidthUint8, 0xFF, BIT6);
//PeiStall (PeiServices, NULL, 100); //delay 100 ms (should be >1ms) // WAIT POWER READY: GPIO28 (MXM_PWRGD) @@ -261,7 +261,7 @@ gpioEarlyInit( ReadMEM (GpioMmioAddr + SB_GPIO_REG28, AccWidthUint8, &Data8); } // [GPIO] GPIO44: PE_GPIO0 MXM Reset set to 1 for reset - // RWMEM (GpioMmioAddr + SB_GPIO_REG44, AccWidthUint8, 0xBF, BIT6); + // RWMEM (GpioMmioAddr + SB_GPIO_REG44, AccWidthUint8, 0xBF, BIT6); } else { @@ -270,9 +270,9 @@ gpioEarlyInit(
//PeiStall (PeiServices, NULL, 100); //delay 100 ms (should be >1ms) SbStall (10000); - + // [GPIO] GPIO45: PE_GPIO1 MXM_POWER_ENABLE down - RWMEM (GpioMmioAddr + SB_GPIO_REG45, AccWidthUint8, 0xBF, 0); + RWMEM (GpioMmioAddr + SB_GPIO_REG45, AccWidthUint8, 0xBF, 0); }
// @@ -288,7 +288,7 @@ gpioEarlyInit( RWMEM (GpioMmioAddr + SB_GPIO_REG197, AccWidthUint8, 0x03, BIT6); // output HIGH RWMEM (GpioMmioAddr + SB_GPIO_REG197, AccWidthUint8, 0x63, BIT3); // pullup DISABLE
- // Setup AD25/GPIO25 as GPO for PCIE_RST#_LAN: + // Setup AD25/GPIO25 as GPO for PCIE_RST#_LAN: RWMEM (IoMuxMmioAddr + SB_GPIO_REG25, AccWidthUint8, 00, 0x1); // GPIO // RWMEM (GpioMmioAddr + SB_GPIO_REG25, AccWidthUint8, 0x03, 0); // GPO RWMEM (GpioMmioAddr + SB_GPIO_REG25, AccWidthUint8, 0x03, BIT6); // output HIGH @@ -298,7 +298,7 @@ gpioEarlyInit( // set CLK_REQ3#/SATA_IS1#/GPIO63 as CLK_REQ for LAN_CLKREQ# RWMEM (IoMuxMmioAddr + SB_GPIO_REG63, AccWidthUint8, 00, 0x0); // CLK_REQ3# RWMEM (MiscMmioAddr + SB_MISC_REG00+1, AccWidthUint8, 0x0F, 0xF0); // Enable GPP_CLK3 - + // // APU GPP1: WUSB // GPIO1: MPCIE_RST2#, LOW active @@ -354,7 +354,7 @@ gpioEarlyInit( // GPIO41: CLKREQ# // Clock: GPP_CLK8 // - // Setup SATA_IS5#/FANIN3/GPIO59 as GPO for 1394_ON: + // Setup SATA_IS5#/FANIN3/GPIO59 as GPO for 1394_ON: RWMEM (IoMuxMmioAddr + SB_GPIO_REG59, AccWidthUint8, 00, 0x2); // GPIO // RWMEM (GpioMmioAddr + SB_GPIO_REG59, AccWidthUint8, 0x03, 0); // GPO RWMEM (GpioMmioAddr + SB_GPIO_REG59, AccWidthUint8, 0x03, BIT6); // output HIGH @@ -382,8 +382,8 @@ gpioEarlyInit( if (!CONFIG_ONBOARD_LAN) { // 1 - DISABLED RWMEM (GpioMmioAddr + SB_GPIO_REG197, AccWidthUint8, 0xBF, 0); // LOM_POWER off - RWMEM (GpioMmioAddr + SB_GPIO_REG25, AccWidthUint8, 0xBF, 0); - RWMEM (GpioMmioAddr + SB_GPIO_REG63, AccWidthUint8, 0xFF, BIT3); // PULL UP - DISABLED + RWMEM (GpioMmioAddr + SB_GPIO_REG25, AccWidthUint8, 0xBF, 0); + RWMEM (GpioMmioAddr + SB_GPIO_REG63, AccWidthUint8, 0xFF, BIT3); // PULL UP - DISABLED RWMEM (MiscMmioAddr + SB_MISC_REG00+1, AccWidthUint8, 0x0F, 0); // Disable GPP_CLK3 } // else @@ -409,11 +409,11 @@ gpioEarlyInit( // else // { // 0 - AUTO // // set BIT3=1 (PULLUP disable), BIT4=0 (PULLDOWN Disable), BIT6=1 (output HIGH) -// RWMEM (GpioMmioAddr + SB_GPIO_REG27, AccWidthUint8, 0x03, BIT6); +// RWMEM (GpioMmioAddr + SB_GPIO_REG27, AccWidthUint8, 0x03, BIT6); // RWMEM (GpioMmioAddr + SB_GPIO_REG27, AccWidthUint8, 0x63, BIT3); // // RWMEM (GpioMmioAddr + SB_GPIO_REG59, AccWidthUint8, 0x03, BIT6); -// RWMEM (GpioMmioAddr + SB_GPIO_REG59, AccWidthUint8, 0x63, BIT3); +// RWMEM (GpioMmioAddr + SB_GPIO_REG59, AccWidthUint8, 0x63, BIT3); // }
// @@ -430,7 +430,7 @@ gpioEarlyInit( RWMEM (GpioMmioAddr + SB_GPIO_REG200, AccWidthUint8, 0xBF, 0); RWMEM (GpioMmioAddr + SB_GPIO_REG26, AccWidthUint8, 0xBF, 0); RWMEM (GpioMmioAddr + SB_GPIO_REG46, AccWidthUint8, 0xFF, BIT3); // PULL_UP DISABLE - RWMEM (MiscMmioAddr + SB_MISC_REG00+3, AccWidthUint8, 0x0F, 0); // DISABLE GPP_CLK7 + RWMEM (MiscMmioAddr + SB_MISC_REG00+3, AccWidthUint8, 0x0F, 0); // DISABLE GPP_CLK7 RWMEM (GpioMmioAddr + SB_GPIO_REG172, AccWidthUint8, 0xBF, 0); // FCH_USB3.0PORT_EN# 0:ENABLE; 1:DISABLE } // } @@ -447,25 +447,25 @@ if (!CONFIG_ONBOARD_BLUETOOTH) { }
// -// WebCam control: +// WebCam control: // amdWebCam: CMOS, 0 - AUTO, 1 - DISABLE // GPIO34: WEBCAM_ON#, 0 - ON, 1 - OFF // if (!CONFIG_ONBOARD_WEBCAM) { //- if (SystemConfiguration.amdWebCam == 1) { RWMEM (GpioMmioAddr + SB_GPIO_REG34, AccWidthUint8, 0xBF, BIT6); -//- } +//- } }
// -// Travis enable: +// Travis enable: // amdTravisCtrl: CMOS, 0 - DISABLE, 1 - ENABLE // GPIO66: TRAVIS_EN#, 0 - ENABLE, 1 - DISABLE // if (!CONFIG_ONBOARD_TRAVIS) { //- if (SystemConfiguration.amdTravisCtrl == 0) { RWMEM (GpioMmioAddr + SB_GPIO_REG66, AccWidthUint8, 0xBF, BIT6); -//- } +//- } }
// diff --git a/src/mainboard/amd/torpedo/gpio.h b/src/mainboard/amd/torpedo/gpio.h old mode 100755 new mode 100644 index 159394e..45394ef --- a/src/mainboard/amd/torpedo/gpio.h +++ b/src/mainboard/amd/torpedo/gpio.h @@ -21,8 +21,8 @@ * M O D U L E S U S E D *---------------------------------------------------------------------------------------- */ - - + + #ifndef _GPIO_H_ #define _GPIO_H_
@@ -121,8 +121,8 @@ #define GPIO_18_SELECT FUNCTION0+NonGpio // NOT USED #define GPIO_19_SELECT FUNCTION1 // For LASSO_DET# detection when Gevent14# is asserted. #define GPIO_20_SELECT FUNCTION1 // PX_MUX for DOCKING card, PX MUX selection in mux mode. dGPU enable with high(option) -#define GPIO_21_SELECT FUNCTION1 // DOCK_MUX for DCKING card, MUX selection output. Docking display enabled when high(option) -#define GPIO_22_SELECT FUNCTION1 // SB_PWR_LV, INDICATE TO THE MXM THE SYSTEM IS IN LOW BATTERY MODE +#define GPIO_21_SELECT FUNCTION1 // DOCK_MUX for DCKING card, MUX selection output. Docking display enabled when high(option) +#define GPIO_22_SELECT FUNCTION1 // SB_PWR_LV, INDICATE TO THE MXM THE SYSTEM IS IN LOW BATTERY MODE // 1:BATTERY IS FINE(DEFAULT) // 0:BATTERY IS LOW #define GPIO_23_SELECT FUNCTION1 // CODEC_ON.1: CODEC ON (default)0: CODEC OFF @@ -143,7 +143,7 @@ // 0:USB3.0 I/F in Express CARD // 1:PCIE I/F in Express CARD detection #define GPIO_34_SELECT FUNCTION1 // WEBCAM_ON#. 0: ON (default) 1: OFF -#define GPIO_35_SELECT FUNCTION1 // ODD_DA_INTH# +#define GPIO_35_SELECT FUNCTION1 // ODD_DA_INTH# #define GPIO_36_SELECT FUNCTION0+NonGpio // PCICLK FOR KBC #define GPIO_37_SELECT FUNCTION0+NonGpio // NOT USED #define GPIO_38_SELECT FUNCTION0+NonGpio // NOT USED @@ -152,7 +152,7 @@ #define GPIO_41_SELECT FUNCTION1+NonGpio // 1394 CLK REQ# #define GPIO_42_SELECT FUNCTION1+NonGpio // X4 GPP CLK REQ# #define GPIO_43_SELECT FUNCTION0+NonGpio // SMBUS0, CLOCK -#define GPIO_44_SELECT FUNCTION1+NonGpio // PEGPIO0, RESET THE MXM MODULE +#define GPIO_44_SELECT FUNCTION1+NonGpio // PEGPIO0, RESET THE MXM MODULE #define GPIO_45_SELECT FUNCTION2+NonGpio // PEGPIO1, 1:MXM IS POWER ON; 0:MXM IS OFF #define GPIO_46_SELECT FUNCTION1+NonGpio // USB3.0_CLKREQ# #define GPIO_47_SELECT FUNCTION0+NonGpio // SMBUS0, DATA @@ -215,7 +215,7 @@ #define GPIO_101_SELECT FUNCTION1 // LPC_PD#/GEVENT5# -> hotplug of express card, low active #define GPIO_102_SELECT FUNCTION0+NonGpio // USB_OC6#/IR_TX1/ GEVENT6# -> NOT USED, // there is a confliction to IR function when this pin is as a GEVENT. -#define GPIO_103_SELECT FUNCTION0+NonGpio // DDR3_RST#/GEVENT7#/VGA_PD -> VGA_PD, +#define GPIO_103_SELECT FUNCTION0+NonGpio // DDR3_RST#/GEVENT7#/VGA_PD -> VGA_PD, // special pin difination for SB900 VGA OUTPUT, high active, // VGA power for Hudson-M2 will be down when it was asserted. #define GPIO_104_SELECT FUNCTION0 // WAKE#/GEVENT8# -> WAKEUP, low active @@ -223,7 +223,7 @@ #define GPIO_106_SELECT FUNCTION0 // GBE_LED2/GEVENT10# -> GBE_LED2 #define GPIO_107_SELECT FUNCTION0+NonGpio // GBE_STAT0/GEVENT11# -> GBE_STAT0 #define GPIO_108_SELECT FUNCTION2 // USB_OC0#/TRST#/GEVENT12# -> SMBALERT# (Light Sensor), low active - // [option for SPI_TPM_CS# in Hudson-M2 A12)] + // [option for SPI_TPM_CS# in Hudson-M2 A12)] #define GPIO_109_SELECT FUNCTION0 // USB_OC1#/TDI/GEVENT13# - USB OC for 0, 1,2,3 & USB_OC expresscard (usb4) & // USB3.0 PORT0,1:low active,disable all usb ports and new card power at a same time #define GPIO_110_SELECT FUNCTION2 // USB_OC2#/TCK/GEVENT14# -> Lasso detect or Dock detect, @@ -238,7 +238,7 @@ #define GPIO_115_SELECT FUNCTION0 // SYS_RESET#/GEVENT19# -> SYS_RST# #define GPIO_116_SELECT FUNCTION0 // R_RX1/GEVENT20# -> IR INPUT #define GPIO_117_SELECT FUNCTION1+NonGpio // SPI_CS3#/GBE_STAT1/GEVENT21# -> GBE_STAT1 -#define GPIO_118_SELECT FUNCTION1 // RI#/GEVENT22# -> LID_CLOSED# +#define GPIO_118_SELECT FUNCTION1 // RI#/GEVENT22# -> LID_CLOSED# #define GPIO_119_SELECT FUNCTION0 // LPC_SMI#/GEVENT23# -> EC_SMI #define GPIO_120_SELECT FUNCTION0+NonGpio #define GPIO_121_SELECT FUNCTION0+NonGpio @@ -287,7 +287,7 @@ #define GPIO_162_SELECT FUNCTION0+NonGpio // SPI ROM #define GPIO_163_SELECT FUNCTION0+NonGpio // SPI ROM #define GPIO_164_SELECT FUNCTION0+NonGpio // SPI ROM -#define GPIO_165_SELECT FUNCTION0+NonGpio // SPI ROM +#define GPIO_165_SELECT FUNCTION0+NonGpio // SPI ROM #define GPIO_166_SELECT FUNCTION1+NonGpio // GBE_STAT2 #define GPIO_167_SELECT FUNCTION0+NonGpio // AZ_SDATA_IN0 #define GPIO_168_SELECT FUNCTION0+NonGpio // AZ_SDATA_IN1 @@ -357,18 +357,18 @@
#define TYPE_GPI (1<<5) #define TYPE_GPO (0<<5) - -#define GPIO_00_TYPE TYPE_GPO + +#define GPIO_00_TYPE TYPE_GPO #define GPIO_01_TYPE TYPE_GPO #define GPIO_02_TYPE TYPE_GPO #define GPIO_03_TYPE TYPE_GPO #define GPIO_04_TYPE TYPE_GPO -#define GPIO_05_TYPE TYPE_GPO +#define GPIO_05_TYPE TYPE_GPO #define GPIO_06_TYPE TYPE_GPO #define GPIO_07_TYPE TYPE_GPO #define GPIO_08_TYPE TYPE_GPO #define GPIO_09_TYPE TYPE_GPI -#define GPIO_10_TYPE TYPE_GPI +#define GPIO_10_TYPE TYPE_GPI #define GPIO_11_TYPE TYPE_GPO #define GPIO_12_TYPE TYPE_GPO #define GPIO_13_TYPE TYPE_GPO @@ -397,33 +397,33 @@ #define GPIO_36_TYPE TYPE_GPO #define GPIO_37_TYPE TYPE_GPO #define GPIO_38_TYPE TYPE_GPO -#define GPIO_39_TYPE TYPE_GPO +#define GPIO_39_TYPE TYPE_GPO #define GPIO_40_TYPE TYPE_GPO -#define GPIO_41_TYPE TYPE_GPI +#define GPIO_41_TYPE TYPE_GPI #define GPIO_42_TYPE TYPE_GPI #define GPIO_43_TYPE TYPE_GPO #define GPIO_44_TYPE TYPE_GPO #define GPIO_45_TYPE TYPE_GPO #define GPIO_46_TYPE TYPE_GPI #define GPIO_47_TYPE TYPE_GPO -#define GPIO_48_TYPE TYPE_GPO -#define GPIO_49_TYPE TYPE_GPO +#define GPIO_48_TYPE TYPE_GPO +#define GPIO_49_TYPE TYPE_GPO #define GPIO_50_TYPE TYPE_GPO #define GPIO_51_TYPE TYPE_GPO #define GPIO_52_TYPE TYPE_GPO -#define GPIO_53_TYPE TYPE_GPO -#define GPIO_54_TYPE TYPE_GPO -#define GPIO_55_TYPE TYPE_GPO +#define GPIO_53_TYPE TYPE_GPO +#define GPIO_54_TYPE TYPE_GPO +#define GPIO_55_TYPE TYPE_GPO #define GPIO_56_TYPE TYPE_GPI #define GPIO_57_TYPE TYPE_GPO -#define GPIO_58_TYPE TYPE_GPO +#define GPIO_58_TYPE TYPE_GPO #define GPIO_59_TYPE TYPE_GPO #define GPIO_60_TYPE TYPE_GPI #define GPIO_61_TYPE TYPE_GPI #define GPIO_62_TYPE TYPE_GPI #define GPIO_63_TYPE TYPE_GPI #define GPIO_64_TYPE TYPE_GPI -#define GPIO_65_TYPE TYPE_GPI +#define GPIO_65_TYPE TYPE_GPI #define GPIO_66_TYPE TYPE_GPO #define GPIO_67_TYPE TYPE_GPO #define GPIO_68_TYPE TYPE_GPO @@ -460,17 +460,17 @@ #define GPIO_97_TYPE TYPE_GPI #define GPIO_98_TYPE TYPE_GPI #define GPIO_99_TYPE TYPE_GPI -#define GPIO_100_TYPE TYPE_GPI +#define GPIO_100_TYPE TYPE_GPI #define GPIO_101_TYPE TYPE_GPI #define GPIO_102_TYPE TYPE_GPO #define GPIO_103_TYPE TYPE_GPO #define GPIO_104_TYPE TYPE_GPI -#define GPIO_105_TYPE TYPE_GPI +#define GPIO_105_TYPE TYPE_GPI #define GPIO_106_TYPE TYPE_GPO #define GPIO_107_TYPE TYPE_GPI #define GPIO_108_TYPE TYPE_GPI #define GPIO_109_TYPE TYPE_GPI -#define GPIO_110_TYPE TYPE_GPI +#define GPIO_110_TYPE TYPE_GPI #define GPIO_111_TYPE TYPE_GPI #define GPIO_112_TYPE TYPE_GPI #define GPIO_113_TYPE TYPE_GPI @@ -500,33 +500,33 @@ #define GPIO_136_TYPE TYPE_GPO #define GPIO_137_TYPE TYPE_GPO #define GPIO_138_TYPE TYPE_GPO -#define GPIO_139_TYPE TYPE_GPO +#define GPIO_139_TYPE TYPE_GPO #define GPIO_140_TYPE TYPE_GPO -#define GPIO_141_TYPE TYPE_GPO +#define GPIO_141_TYPE TYPE_GPO #define GPIO_142_TYPE TYPE_GPO #define GPIO_143_TYPE TYPE_GPO #define GPIO_144_TYPE TYPE_GPO #define GPIO_145_TYPE TYPE_GPO #define GPIO_146_TYPE TYPE_GPO #define GPIO_147_TYPE TYPE_GPO -#define GPIO_148_TYPE TYPE_GPO -#define GPIO_149_TYPE TYPE_GPO +#define GPIO_148_TYPE TYPE_GPO +#define GPIO_149_TYPE TYPE_GPO #define GPIO_150_TYPE TYPE_GPO #define GPIO_151_TYPE TYPE_GPO #define GPIO_152_TYPE TYPE_GPO -#define GPIO_153_TYPE TYPE_GPO -#define GPIO_154_TYPE TYPE_GPO -#define GPIO_155_TYPE TYPE_GPO +#define GPIO_153_TYPE TYPE_GPO +#define GPIO_154_TYPE TYPE_GPO +#define GPIO_155_TYPE TYPE_GPO #define GPIO_156_TYPE TYPE_GPO #define GPIO_157_TYPE TYPE_GPO -#define GPIO_158_TYPE TYPE_GPO +#define GPIO_158_TYPE TYPE_GPO #define GPIO_159_TYPE TYPE_GPO #define GPIO_160_TYPE TYPE_GPO #define GPIO_161_TYPE TYPE_GPO #define GPIO_162_TYPE TYPE_GPO #define GPIO_163_TYPE TYPE_GPO #define GPIO_164_TYPE TYPE_GPI -#define GPIO_165_TYPE TYPE_GPO +#define GPIO_165_TYPE TYPE_GPO #define GPIO_166_TYPE TYPE_GPI #define GPIO_167_TYPE TYPE_GPI #define GPIO_168_TYPE TYPE_GPI @@ -561,17 +561,17 @@ #define GPIO_197_TYPE TYPE_GPO #define GPIO_198_TYPE TYPE_GPO #define GPIO_199_TYPE TYPE_GPI -#define GPIO_200_TYPE TYPE_GPO +#define GPIO_200_TYPE TYPE_GPO #define GPIO_201_TYPE TYPE_GPI #define GPIO_202_TYPE TYPE_GPI #define GPIO_203_TYPE TYPE_GPI #define GPIO_204_TYPE TYPE_GPI -#define GPIO_205_TYPE TYPE_GPI +#define GPIO_205_TYPE TYPE_GPI #define GPIO_206_TYPE TYPE_GPI #define GPIO_207_TYPE TYPE_GPI #define GPIO_208_TYPE TYPE_GPI #define GPIO_209_TYPE TYPE_GPO -#define GPIO_210_TYPE TYPE_GPO +#define GPIO_210_TYPE TYPE_GPO #define GPIO_211_TYPE TYPE_GPO #define GPIO_212_TYPE TYPE_GPO #define GPIO_213_TYPE TYPE_GPO @@ -595,17 +595,17 @@ #define GPO_LOW (0<<6) #define GPO_HI (1<<6)
-#define GPO_00_LEVEL GPO_HI +#define GPO_00_LEVEL GPO_HI #define GPO_01_LEVEL GPO_HI #define GPO_02_LEVEL GPO_HI #define GPO_03_LEVEL GPO_HI #define GPO_04_LEVEL GPO_HI -#define GPO_05_LEVEL GPO_HI +#define GPO_05_LEVEL GPO_HI #define GPO_06_LEVEL GPO_HI #define GPO_07_LEVEL GPO_HI #define GPO_08_LEVEL GPO_HI #define GPO_09_LEVEL GPO_LOW -#define GPO_10_LEVEL GPO_LOW +#define GPO_10_LEVEL GPO_LOW #define GPO_11_LEVEL GPO_HI #define GPO_12_LEVEL GPO_HI #define GPO_13_LEVEL GPO_HI @@ -634,16 +634,16 @@ #define GPO_36_LEVEL GPO_LOW #define GPO_37_LEVEL GPO_HI #define GPO_38_LEVEL GPO_HI -#define GPO_39_LEVEL GPO_HI +#define GPO_39_LEVEL GPO_HI #define GPO_40_LEVEL GPO_LOW -#define GPO_41_LEVEL GPO_LOW +#define GPO_41_LEVEL GPO_LOW #define GPO_42_LEVEL GPO_LOW #define GPO_43_LEVEL GPO_LOW #define GPO_44_LEVEL GPO_HI #define GPO_45_LEVEL GPO_HI #define GPO_46_LEVEL GPO_LOW #define GPO_47_LEVEL GPO_LOW -#define GPO_48_LEVEL GPO_LOW +#define GPO_48_LEVEL GPO_LOW #define GPO_49_LEVEL GPO_HI #define GPO_50_LEVEL GPO_HI #define GPO_51_LEVEL GPO_LOW @@ -667,7 +667,7 @@ #define GPO_69_LEVEL GPO_LOW #define GPO_70_LEVEL GPO_LOW #define GPO_71_LEVEL GPO_LOW -#define GPO_72_LEVEL GPO_LOW +#define GPO_72_LEVEL GPO_LOW #define GPO_73_LEVEL GPO_LOW #define GPO_74_LEVEL GPO_LOW #define GPO_75_LEVEL GPO_LOW @@ -695,17 +695,17 @@ #define GPO_97_LEVEL GPO_LOW #define GPO_98_LEVEL GPO_LOW #define GPO_99_LEVEL GPO_LOW -#define GPO_100_LEVEL GPO_LOW +#define GPO_100_LEVEL GPO_LOW #define GPO_101_LEVEL GPO_LOW #define GPO_102_LEVEL GPO_LOW #define GPO_103_LEVEL GPO_LOW #define GPO_104_LEVEL GPO_LOW -#define GPO_105_LEVEL GPO_LOW +#define GPO_105_LEVEL GPO_LOW #define GPO_106_LEVEL GPO_LOW #define GPO_107_LEVEL GPO_LOW #define GPO_108_LEVEL GPO_HI #define GPO_109_LEVEL GPO_LOW -#define GPO_110_LEVEL GPO_HI +#define GPO_110_LEVEL GPO_HI #define GPO_111_LEVEL GPO_HI #define GPO_112_LEVEL GPO_HI #define GPO_113_LEVEL GPO_LOW @@ -734,16 +734,16 @@ #define GPO_136_LEVEL GPO_LOW #define GPO_137_LEVEL GPO_LOW #define GPO_138_LEVEL GPO_LOW -#define GPO_139_LEVEL GPO_LOW +#define GPO_139_LEVEL GPO_LOW #define GPO_140_LEVEL GPO_LOW -#define GPO_141_LEVEL GPO_LOW +#define GPO_141_LEVEL GPO_LOW #define GPO_142_LEVEL GPO_LOW #define GPO_143_LEVEL GPO_LOW #define GPO_144_LEVEL GPO_LOW #define GPO_145_LEVEL GPO_LOW #define GPO_146_LEVEL GPO_LOW #define GPO_147_LEVEL GPO_LOW -#define GPO_148_LEVEL GPO_LOW +#define GPO_148_LEVEL GPO_LOW #define GPO_149_LEVEL GPO_LOW #define GPO_150_LEVEL GPO_LOW #define GPO_151_LEVEL GPO_LOW @@ -795,17 +795,17 @@ #define GPO_197_LEVEL GPO_LOW #define GPO_198_LEVEL GPO_LOW #define GPO_199_LEVEL GPO_LOW -#define GPO_200_LEVEL GPO_HI +#define GPO_200_LEVEL GPO_HI #define GPO_201_LEVEL GPO_LOW #define GPO_202_LEVEL GPO_LOW #define GPO_203_LEVEL GPO_LOW #define GPO_204_LEVEL GPO_LOW -#define GPO_205_LEVEL GPO_LOW +#define GPO_205_LEVEL GPO_LOW #define GPO_206_LEVEL GPO_LOW #define GPO_207_LEVEL GPO_LOW #define GPO_208_LEVEL GPO_LOW #define GPO_209_LEVEL GPO_LOW -#define GPO_210_LEVEL GPO_LOW +#define GPO_210_LEVEL GPO_LOW #define GPO_211_LEVEL GPO_LOW #define GPO_212_LEVEL GPO_LOW #define GPO_213_LEVEL GPO_LOW @@ -2278,9 +2278,9 @@ typedef struct _GEVENT_SETTINGS u8 SciLevl; // 0: Edge trigger, 1: Level Trigger u8 SmiSciEn; // 0: Not send SMI, 1: Send SMI u8 SciS0En; // 0: Disable, 1: Enable - u8 SciMap; // 0000b->1111b + u8 SciMap; // 0000b->1111b u8 SmiTrig; // 0: Active Low, 1: Active High - u8 SmiControl; // 0: Disable, 1: SMI 2: NMI 3: IRQ13 + u8 SmiControl; // 0: Disable, 1: SMI 2: NMI 3: IRQ13 } GEVENT_SETTINGS;
GEVENT_SETTINGS gevent_table[] = @@ -2315,15 +2315,15 @@ GEVENT_SETTINGS gevent_table[] = * P R O T O T Y P E S O F L O C A L F U N C T I O N S *---------------------------------------------------------------------------------------- */ - + /*---------------------------------------------------------------------------------------- * E X P O R T E D F U N C T I O N S *---------------------------------------------------------------------------------------- */ - + /*--------------------------------------------------------------------------------------- * L O C A L F U N C T I O N S *--------------------------------------------------------------------------------------- */ - + #endif diff --git a/src/mainboard/amd/torpedo/irq_tables.c b/src/mainboard/amd/torpedo/irq_tables.c old mode 100755 new mode 100644 diff --git a/src/mainboard/amd/torpedo/mainboard.c b/src/mainboard/amd/torpedo/mainboard.c old mode 100755 new mode 100644 diff --git a/src/mainboard/amd/torpedo/mptable.c b/src/mainboard/amd/torpedo/mptable.c old mode 100755 new mode 100644 index 0381206..2e171a1 --- a/src/mainboard/amd/torpedo/mptable.c +++ b/src/mainboard/amd/torpedo/mptable.c @@ -37,15 +37,15 @@ extern u32 sbdn_sb900; u32 apicid_sb900;
u8 picr_data[] = { - 0x0B,0x0B,0x0B,0x0B,0x1F,0x1F,0x1F,0x1F,0xFA,0xF1,0x00,0x00,0x1F,0x1F,0x1F,0x1F, - 0x09,0x1F,0x1F,0x0B,0x1F,0x0B,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x0B,0x0B,0x0B,0x0B,0x1F,0x1F,0x1F,0x1F,0xFA,0xF1,0x00,0x00,0x1F,0x1F,0x1F,0x1F, + 0x09,0x1F,0x1F,0x0B,0x1F,0x0B,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x0B,0x0B,0x0B,0x0B,0x0B,0x0B,0x0B,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x0B,0x0B,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x0B,0x0B,0x0B,0x0B }; u8 intr_data[] = { - 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F, + 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F, 0x09,0x1F,0x1F,0x10,0x1F,0x12,0x1F,0x10,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x12,0x11,0x12,0x11,0x12,0x11,0x12,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, @@ -96,7 +96,7 @@ static void *smp_write_config_table(void *v) 0, apic_version, cpu_flag, cpu_features, cpu_feature_flags ); - + cpu_flag = MPC_CPU_ENABLED; smp_write_processor(mc, 1, apic_version, @@ -112,11 +112,11 @@ static void *smp_write_config_table(void *v) my_smp_write_bus(mc, bus_isa, "ISA ");
/* I/O APICs: APIC ID Version State Address */ - + device_t dev; u32 dword; u8 byte; - + dword = 0; dword = pm_ioread(0x34) & 0xF0; dword |= (pm_ioread(0x35) & 0xFF) << 8; @@ -127,13 +127,13 @@ static void *smp_write_config_table(void *v) write32 (dword + 0x10, IO_APIC_ID << 24); apicid_sb900 = IO_APIC_ID; smp_write_ioapic(mc, apicid_sb900, 0x21, dword); - + /* PIC IRQ routine */ for (byte = 0x0; byte < sizeof(picr_data); byte ++) { outb(byte, 0xC00); outb(picr_data[byte], 0xC01); } - + /* APIC IRQ routine */ for (byte = 0x0; byte < sizeof(intr_data); byte ++) { outb(byte | 0x80, 0xC00); @@ -172,15 +172,15 @@ static void *smp_write_config_table(void *v) /* Internal VGA */ PCI_INT(0x0, 0x01, 0x0, intr_data[0x02]); PCI_INT(0x0, 0x01, 0x1, intr_data[0x03]); - + /* SMBUS */ PCI_INT(0x0, 0x14, 0x0, 0x10); - + /* HD Audio */ PCI_INT(0x0, 0x14, 0x0, intr_data[0x13]); - + /* USB */ - PCI_INT(0x0, 0x12, 0x0, intr_data[0x30]); + PCI_INT(0x0, 0x12, 0x0, intr_data[0x30]); PCI_INT(0x0, 0x12, 0x1, intr_data[0x31]); PCI_INT(0x0, 0x13, 0x0, intr_data[0x32]); PCI_INT(0x0, 0x13, 0x1, intr_data[0x33]); @@ -194,7 +194,7 @@ static void *smp_write_config_table(void *v)
/* on board NIC & Slot PCIE. */ - + /* PCI slots */ /* PCI_SLOT 0. */ PCI_INT(bus_sb900[1], 0x5, 0x0, 0x14); diff --git a/src/mainboard/amd/torpedo/pmio.c b/src/mainboard/amd/torpedo/pmio.c old mode 100755 new mode 100644 diff --git a/src/mainboard/amd/torpedo/pmio.h b/src/mainboard/amd/torpedo/pmio.h old mode 100755 new mode 100644 diff --git a/src/mainboard/amd/torpedo/reset.c b/src/mainboard/amd/torpedo/reset.c old mode 100755 new mode 100644 diff --git a/src/mainboard/amd/torpedo/romstage.c b/src/mainboard/amd/torpedo/romstage.c old mode 100755 new mode 100644 diff --git a/src/mainboard/asrock/e350m1/BiosCallOuts.c b/src/mainboard/asrock/e350m1/BiosCallOuts.c index ae67c3f..a0d64a7 100644 --- a/src/mainboard/asrock/e350m1/BiosCallOuts.c +++ b/src/mainboard/asrock/e350m1/BiosCallOuts.c @@ -16,7 +16,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ - + #include "agesawrapper.h" #include "amdlib.h" #include "BiosCallOuts.h" @@ -61,7 +61,7 @@ CONST BIOS_CALLOUT_STRUCT BiosCallouts[REQUIRED_CALLOUTS] = {AGESA_HOOKBEFORE_DQS_TRAINING, BiosHookBeforeDQSTraining }, - + {AGESA_HOOKBEFORE_DRAM_INIT, BiosHookBeforeDramInit }, @@ -149,7 +149,7 @@ AGESA_STATUS BiosAllocateBuffer (UINT32 Func, UINT32 Data, VOID *ConfigPtr) /* If BufferHandle has not been allocated on the heap, CurrNodePtr here points to the end of the allocated nodes list. */ - + } /* Find the node that best fits the requested buffer size */ FreedNodeOffset = BiosHeapBasePtr->StartOfFreedNodes; @@ -199,7 +199,7 @@ AGESA_STATUS BiosAllocateBuffer (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
/* If BestFitNode is the first buffer in the list, then update StartOfFreedNodes to reflect the new free node - */ + */ if (BestFitNodeOffset == BiosHeapBasePtr->StartOfFreedNodes) { BiosHeapBasePtr->StartOfFreedNodes = NextFreeOffset; } else { @@ -284,10 +284,10 @@ AGESA_STATUS BiosDeallocateBuffer (UINT32 Func, UINT32 Data, VOID *ConfigPtr) FreedNodePtr->NextNodeOffset = 0;
} else { - /* Otherwise, add freed node to the start of the list - Update NextNodeOffset and BufferSize to include the + /* Otherwise, add freed node to the start of the list + Update NextNodeOffset and BufferSize to include the size of BIOS_BUFFER_NODE - */ + */ AllocNodePtr->NextNodeOffset = FreedNodeOffset; } /* Update StartOfFreedNodes to the new first node */ @@ -295,7 +295,7 @@ AGESA_STATUS BiosDeallocateBuffer (UINT32 Func, UINT32 Data, VOID *ConfigPtr) } else { /* Traverse list of freed nodes to find where the deallocated node should be place - */ + */ NextNodeOffset = FreedNodeOffset; NextNodePtr = FreedNodePtr; while (AllocNodeOffset > NextNodeOffset) { @@ -309,7 +309,7 @@ AGESA_STATUS BiosDeallocateBuffer (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
/* If deallocated node is adjacent to the next node, concatenate both nodes - */ + */ if (NextNodeOffset == EndNodeOffset) { NextNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + NextNodeOffset); AllocNodePtr->BufferSize += NextNodePtr->BufferSize; @@ -323,7 +323,7 @@ AGESA_STATUS BiosDeallocateBuffer (UINT32 Func, UINT32 Data, VOID *ConfigPtr) } /* If deallocated node is adjacent to the previous node, concatenate both nodes - */ + */ PrevNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + PrevNodeOffset); EndNodeOffset = PrevNodeOffset + PrevNodePtr->BufferSize; if (AllocNodeOffset == EndNodeOffset) { @@ -387,10 +387,10 @@ AGESA_STATUS BiosReset (UINT32 Func, UINT32 Data, VOID *ConfigPtr) UINT8 Value; UINTN ResetType; AMD_CONFIG_PARAMS *StdHeader; - + ResetType = Data; StdHeader = ConfigPtr; - + // // Perform the RESET based upon the ResetType. In case of // WARM_RESET_WHENVER and COLD_RESET_WHENEVER, the request will go to @@ -402,17 +402,17 @@ AGESA_STATUS BiosReset (UINT32 Func, UINT32 Data, VOID *ConfigPtr) case WARM_RESET_WHENEVER: case COLD_RESET_WHENEVER: break; - + case WARM_RESET_IMMEDIATELY: case COLD_RESET_IMMEDIATELY: Value = 0x06; LibAmdIoWrite (AccessWidth8, 0xCf9, &Value, StdHeader); break; - + default: break; } - + Status = 0; return Status; } @@ -445,10 +445,10 @@ AGESA_STATUS BiosHookBeforeDramInit (UINT32 Func, UINT32 Data, VOID *ConfigPtr) UINT8 Data8; UINT16 Data16; UINT8 TempData8; - + FcnData = Data; MemData = ConfigPtr; - + Status = AGESA_SUCCESS; /* Get SB800 MMIO Base (AcpiMmioAddr) */ WriteIo8 (0xCD6, 0x27); @@ -459,14 +459,14 @@ AGESA_STATUS BiosHookBeforeDramInit (UINT32 Func, UINT32 Data, VOID *ConfigPtr) Data16 |= Data8; AcpiMmioAddr = (UINT32)Data16 << 16; GpioMmioAddr = AcpiMmioAddr + GPIO_BASE; - + Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG178); Data8 &= ~BIT5; TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178); TempData8 &= 0x03; TempData8 |= Data8; Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, TempData8); - + Data8 |= BIT2+BIT3; Data8 &= ~BIT4; TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178); @@ -485,7 +485,7 @@ AGESA_STATUS BiosHookBeforeDramInit (UINT32 Func, UINT32 Data, VOID *ConfigPtr) TempData8 &= 0x23; TempData8 |= Data8; Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, TempData8); - + switch(MemData->ParameterListPtr->DDR3Voltage){ case VOLT1_35: Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178); @@ -527,12 +527,12 @@ AGESA_STATUS BiosGnbPcieSlotReset (UINT32 Func, UINT32 Data, VOID *ConfigPtr) AGESA_STATUS Status; UINTN FcnData; PCIe_SLOT_RESET_INFO *ResetInfo; - + UINT32 GpioMmioAddr; UINT32 AcpiMmioAddr; UINT8 Data8; UINT16 Data16; - + FcnData = Data; ResetInfo = ConfigPtr; // Get SB800 MMIO Base (AcpiMmioAddr) @@ -552,13 +552,13 @@ AGESA_STATUS BiosGnbPcieSlotReset (UINT32 Func, UINT32 Data, VOID *ConfigPtr) { case AssertSlotReset: Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG21); - Data8 &= ~(UINT8)BIT6 ; + Data8 &= ~(UINT8)BIT6 ; Write64Mem8(GpioMmioAddr+SB_GPIO_REG21, Data8); // MXM_GPIO0. GPIO21 Status = AGESA_SUCCESS; break; case DeassertSlotReset: Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG21); - Data8 |= BIT6 ; + Data8 |= BIT6 ; Write64Mem8 (GpioMmioAddr+SB_GPIO_REG21, Data8); // MXM_GPIO0. GPIO21 Status = AGESA_SUCCESS; break; @@ -575,7 +575,7 @@ AGESA_STATUS BiosGnbPcieSlotReset (UINT32 Func, UINT32 Data, VOID *ConfigPtr) break; case DeassertSlotReset: Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG25); - Data8 |= BIT6 ; + Data8 |= BIT6 ; Write64Mem8 (GpioMmioAddr+SB_GPIO_REG25, Data8); // PCIE_RST#_LAN, GPIO25 Status = AGESA_SUCCESS; break; diff --git a/src/mainboard/asrock/e350m1/BiosCallOuts.h b/src/mainboard/asrock/e350m1/BiosCallOuts.h index 2912ec6..4efe15f 100644 --- a/src/mainboard/asrock/e350m1/BiosCallOuts.h +++ b/src/mainboard/asrock/e350m1/BiosCallOuts.h @@ -16,7 +16,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ - + #ifndef _BIOS_CALLOUT_H_ #define _BIOS_CALLOUT_H_
@@ -45,7 +45,7 @@ AGESA_STATUS GetBiosCallout (UINT32 Func, UINT32 Data, VOID *ConfigPtr);
/* REQUIRED CALLOUTS * AGESA ADVANCED CALLOUTS - CPU - */ + */ AGESA_STATUS BiosAllocateBuffer (UINT32 Func, UINT32 Data, VOID *ConfigPtr); AGESA_STATUS BiosDeallocateBuffer (UINT32 Func, UINT32 Data, VOID *ConfigPtr); AGESA_STATUS BiosLocateBuffer (UINT32 Func, UINT32 Data, VOID *ConfigPtr); diff --git a/src/mainboard/asrock/e350m1/PlatformGnbPcie.c b/src/mainboard/asrock/e350m1/PlatformGnbPcie.c index 0d79077..a79dfab 100644 --- a/src/mainboard/asrock/e350m1/PlatformGnbPcie.c +++ b/src/mainboard/asrock/e350m1/PlatformGnbPcie.c @@ -86,7 +86,7 @@ PCIe_PORT_DESCRIPTOR PortList [] = { DESCRIPTOR_TERMINATE_LIST, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 0, 3), PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT8_PORT_PRESENT, GNB_GPP_PORT8_CHANNEL_TYPE, 8, GNB_GPP_PORT8_HOTPLUG_SUPPORT, GNB_GPP_PORT8_SPEED_MODE, GNB_GPP_PORT8_SPEED_MODE, GNB_GPP_PORT8_LINK_ASPM, 0) - } + } };
PCIe_DDI_DESCRIPTOR DdiList [] = { @@ -118,8 +118,8 @@ PCIe_COMPLEX_DESCRIPTOR Brazos = { // // Allocate buffer for PCIe_COMPLEX_DESCRIPTOR , PCIe_PORT_DESCRIPTOR and PCIe_DDI_DESCRIPTOR // - AllocHeapParams.RequestedBufferSize = (sizeof (PCIe_COMPLEX_DESCRIPTOR) + - sizeof (PCIe_PORT_DESCRIPTOR) * 5 + + AllocHeapParams.RequestedBufferSize = (sizeof (PCIe_COMPLEX_DESCRIPTOR) + + sizeof (PCIe_PORT_DESCRIPTOR) * 5 + sizeof (PCIe_DDI_DESCRIPTOR)) * 2;
AllocHeapParams.BufferHandle = AMD_MEM_MISC_HANDLES_START; @@ -127,10 +127,10 @@ PCIe_COMPLEX_DESCRIPTOR Brazos = { Status = HeapAllocateBuffer (&AllocHeapParams, &InitEarly->StdHeader); if ( Status!= AGESA_SUCCESS) { // Could not allocate buffer for PCIe_COMPLEX_DESCRIPTOR , PCIe_PORT_DESCRIPTOR and PCIe_DDI_DESCRIPTOR - ASSERT(FALSE); + ASSERT(FALSE); return Status; } - + BrazosPcieComplexListPtr = (PCIe_COMPLEX_DESCRIPTOR *) AllocHeapParams.BufferPtr;
AllocHeapParams.BufferPtr += sizeof (PCIe_COMPLEX_DESCRIPTOR); @@ -138,7 +138,7 @@ PCIe_COMPLEX_DESCRIPTOR Brazos = {
AllocHeapParams.BufferPtr += sizeof (PCIe_PORT_DESCRIPTOR) * 5; BrazosPcieDdiPtr = (PCIe_DDI_DESCRIPTOR *) AllocHeapParams.BufferPtr; - + LibAmdMemFill (BrazosPcieComplexListPtr, 0, sizeof (PCIe_COMPLEX_DESCRIPTOR), @@ -148,7 +148,7 @@ PCIe_COMPLEX_DESCRIPTOR Brazos = { 0, sizeof (PCIe_PORT_DESCRIPTOR) * 5, &InitEarly->StdHeader); - + LibAmdMemFill (BrazosPcieDdiPtr, 0, sizeof (PCIe_DDI_DESCRIPTOR) * 2, @@ -162,7 +162,7 @@ PCIe_COMPLEX_DESCRIPTOR Brazos = { ((PCIe_COMPLEX_DESCRIPTOR*)BrazosPcieComplexListPtr)->PciePortList = (PCIe_PORT_DESCRIPTOR*)BrazosPciePortPtr; ((PCIe_COMPLEX_DESCRIPTOR*)BrazosPcieComplexListPtr)->DdiLinkList = (PCIe_DDI_DESCRIPTOR*)BrazosPcieDdiPtr;
- InitEarly->GnbConfig.PcieComplexList = BrazosPcieComplexListPtr; - InitEarly->GnbConfig.PsppPolicy = 0; + InitEarly->GnbConfig.PcieComplexList = BrazosPcieComplexListPtr; + InitEarly->GnbConfig.PsppPolicy = 0; }
diff --git a/src/mainboard/asrock/e350m1/PlatformGnbPcieComplex.h b/src/mainboard/asrock/e350m1/PlatformGnbPcieComplex.h index f35d8db..b51089f 100644 --- a/src/mainboard/asrock/e350m1/PlatformGnbPcieComplex.h +++ b/src/mainboard/asrock/e350m1/PlatformGnbPcieComplex.h @@ -25,42 +25,42 @@ #include "amdlib.h"
//GNB GPP Port4 -#define GNB_GPP_PORT4_PORT_PRESENT 1 //0:Disable 1:Enable +#define GNB_GPP_PORT4_PORT_PRESENT 1 //0:Disable 1:Enable #define GNB_GPP_PORT4_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2 #define GNB_GPP_PORT4_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1 -#define GNB_GPP_PORT4_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) +#define GNB_GPP_PORT4_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db) #define GNB_GPP_PORT4_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced
//GNB GPP Port5 -#define GNB_GPP_PORT5_PORT_PRESENT 1 //0:Disable 1:Enable +#define GNB_GPP_PORT5_PORT_PRESENT 1 //0:Disable 1:Enable #define GNB_GPP_PORT5_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2 #define GNB_GPP_PORT5_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1 -#define GNB_GPP_PORT5_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) +#define GNB_GPP_PORT5_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db) #define GNB_GPP_PORT5_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced
//GNB GPP Port6 -#define GNB_GPP_PORT6_PORT_PRESENT 1 //0:Disable 1:Enable +#define GNB_GPP_PORT6_PORT_PRESENT 1 //0:Disable 1:Enable #define GNB_GPP_PORT6_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2 #define GNB_GPP_PORT6_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1 -#define GNB_GPP_PORT6_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) +#define GNB_GPP_PORT6_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db) #define GNB_GPP_PORT6_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced
//GNB GPP Port7 -#define GNB_GPP_PORT7_PORT_PRESENT 1 //0:Disable 1:Enable +#define GNB_GPP_PORT7_PORT_PRESENT 1 //0:Disable 1:Enable #define GNB_GPP_PORT7_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2 #define GNB_GPP_PORT7_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1 -#define GNB_GPP_PORT7_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) +#define GNB_GPP_PORT7_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db) #define GNB_GPP_PORT7_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced
//GNB GPP Port8 -#define GNB_GPP_PORT8_PORT_PRESENT 1 //0:Disable 1:Enable +#define GNB_GPP_PORT8_PORT_PRESENT 1 //0:Disable 1:Enable #define GNB_GPP_PORT8_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2 #define GNB_GPP_PORT8_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1 -#define GNB_GPP_PORT8_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) +#define GNB_GPP_PORT8_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db) #define GNB_GPP_PORT8_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced
@@ -68,5 +68,5 @@ VOID OemCustomizeInitEarly ( IN OUT AMD_EARLY_PARAMS *InitEarly ); - + #endif //_PLATFORM_GNB_PCIE_COMPLEX_H diff --git a/src/mainboard/asrock/e350m1/agesawrapper.c b/src/mainboard/asrock/e350m1/agesawrapper.c index 802e00e..7fc2fd6 100644 --- a/src/mainboard/asrock/e350m1/agesawrapper.c +++ b/src/mainboard/asrock/e350m1/agesawrapper.c @@ -21,7 +21,7 @@ * M O D U L E S U S E D *---------------------------------------------------------------------------------------- */ - + #include <stdint.h> #include <string.h> #include "agesawrapper.h" @@ -52,8 +52,8 @@ VOID *AcpiSlit = NULL;
VOID *AcpiWheaMce = NULL; VOID *AcpiWheaCmc = NULL; -VOID *AcpiAlib = NULL; - +VOID *AcpiAlib = NULL; +
/*---------------------------------------------------------------------------------------- * T Y P E D E F S A N D S T R U C T U R E S @@ -64,17 +64,17 @@ VOID *AcpiAlib = NULL; * P R O T O T Y P E S O F L O C A L F U N C T I O N S *---------------------------------------------------------------------------------------- */ - + /*---------------------------------------------------------------------------------------- * E X P O R T E D F U N C T I O N S *---------------------------------------------------------------------------------------- */ - + /*--------------------------------------------------------------------------------------- * L O C A L F U N C T I O N S *--------------------------------------------------------------------------------------- */ -UINT32 +UINT32 agesawrapper_amdinitcpuio ( VOID ) @@ -84,11 +84,11 @@ agesawrapper_amdinitcpuio ( UINT32 PciData; PCI_ADDR PciAddress; AMD_CONFIG_PARAMS StdHeader; - + /* Enable legacy video routing: D18F1xF4 VGA Enable */ PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xF4); PciData = 1; - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
/* The platform BIOS needs to ensure the memory ranges of SB800 legacy * devices (TPM, HPET, BIOS RAM, Watchdog Timer, I/O APIC and ACPI) are @@ -97,21 +97,21 @@ agesawrapper_amdinitcpuio ( PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x84); PciData = 0x00FEDF00; // last address before processor local APIC at FEE00000 PciData |= 1 << 7; // set NP (non-posted) bit - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x80); PciData = (0xFED00000 >> 8) | 3; // lowest NP address is HPET at FED00000 - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + /* Map the remaining PCI hole as posted MMIO */ PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x8C); PciData = 0x00FECF00; // last address before non-posted range - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); LibAmdMsrRead (0xC001001A, &MsrReg, &StdHeader); MsrReg = (MsrReg >> 8) | 3; PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x88); PciData = (UINT32)MsrReg; - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + /* Send all IO (0000-FFFF) to southbridge. */ PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xC4); PciData = 0x0000F000; @@ -122,8 +122,8 @@ agesawrapper_amdinitcpuio ( Status = AGESA_SUCCESS; return (UINT32)Status; } - -UINT32 + +UINT32 agesawrapper_amdinitmmio ( VOID ) @@ -133,7 +133,7 @@ agesawrapper_amdinitmmio ( UINT32 PciData; PCI_ADDR PciAddress; AMD_CONFIG_PARAMS StdHeader; - + /* Set the MMIO Configuration Base Address and Bus Range onto MMIO configuration base Address MSR register. @@ -141,27 +141,27 @@ agesawrapper_amdinitmmio (
MsrReg = CONFIG_MMCONF_BASE_ADDRESS | (LibAmdBitScanReverse (CONFIG_MMCONF_BUS_NUMBER) << 2) | 1; LibAmdMsrWrite (0xC0010058, &MsrReg, &StdHeader); - + /* Set the NB_CFG MSR register. Enable CF8 extended configuration cycles. */ LibAmdMsrRead (0xC001001F, &MsrReg, &StdHeader); MsrReg = MsrReg | 0x0000400000000000; LibAmdMsrWrite (0xC001001F, &MsrReg, &StdHeader); - + /* Set Ontario Link Data */ PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0, 0, 0xE0); PciData = 0x01308002; - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0, 0, 0xE4); PciData = (AMD_APU_SSID<<0x10)|AMD_APU_SVID; - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + Status = AGESA_SUCCESS; return (UINT32)Status; }
-UINT32 +UINT32 agesawrapper_amdinitreset ( VOID ) @@ -169,7 +169,7 @@ agesawrapper_amdinitreset ( AGESA_STATUS status; AMD_INTERFACE_PARAMS AmdParamStruct; AMD_RESET_PARAMS AmdResetParams; - + LibAmdMemFill (&AmdParamStruct, 0, sizeof (AMD_INTERFACE_PARAMS), @@ -191,14 +191,14 @@ agesawrapper_amdinitreset ( AmdParamStruct.StdHeader.ImageBasePtr = 0; AmdCreateStruct (&AmdParamStruct); AmdResetParams.HtConfig.Depth = 0; - + status = AmdInitReset ((AMD_RESET_PARAMS *)AmdParamStruct.NewStructPtr); if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(); AmdReleaseStruct (&AmdParamStruct); return (UINT32)status; - } - -UINT32 + } + +UINT32 agesawrapper_amdinitearly ( VOID ) @@ -206,7 +206,7 @@ agesawrapper_amdinitearly ( AGESA_STATUS status; AMD_INTERFACE_PARAMS AmdParamStruct; AMD_EARLY_PARAMS *AmdEarlyParamsPtr; - + LibAmdMemFill (&AmdParamStruct, 0, sizeof (AMD_INTERFACE_PARAMS), @@ -219,10 +219,10 @@ agesawrapper_amdinitearly ( AmdParamStruct.StdHeader.Func = 0; AmdParamStruct.StdHeader.ImageBasePtr = 0; AmdCreateStruct (&AmdParamStruct); - + AmdEarlyParamsPtr = (AMD_EARLY_PARAMS *)AmdParamStruct.NewStructPtr; OemCustomizeInitEarly (AmdEarlyParamsPtr); - + status = AmdInitEarly ((AMD_EARLY_PARAMS *)AmdParamStruct.NewStructPtr); if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(); AmdReleaseStruct (&AmdParamStruct); @@ -230,7 +230,7 @@ agesawrapper_amdinitearly ( return (UINT32)status; }
-UINT32 +UINT32 agesawrapper_amdinitpost ( VOID ) @@ -272,7 +272,7 @@ agesawrapper_amdinitpost ( return (UINT32)status; }
-UINT32 +UINT32 agesawrapper_amdinitenv ( VOID ) @@ -299,7 +299,7 @@ agesawrapper_amdinitenv ( /* Initialize Subordinate Bus Number and Secondary Bus Number * In platform BIOS this address is allocated by PCI enumeration code Modify D1F0x18 - */ + */ PciAddress.Address.Bus = 0; PciAddress.Address.Device = 1; PciAddress.Address.Function = 0; @@ -399,17 +399,17 @@ agesawrapper_getlateinitptr ( } }
-UINT32 +UINT32 agesawrapper_amdinitmid ( VOID ) { AGESA_STATUS status; AMD_INTERFACE_PARAMS AmdParamStruct; - + /* Enable MMIO on AMD CPU Address Map Controller */ agesawrapper_amdinitcpuio (); - + LibAmdMemFill (&AmdParamStruct, 0, sizeof (AMD_INTERFACE_PARAMS), @@ -431,7 +431,7 @@ agesawrapper_amdinitmid ( return (UINT32)status; }
-UINT32 +UINT32 agesawrapper_amdinitlate ( VOID ) @@ -467,10 +467,10 @@ agesawrapper_amdinitlate ( return (UINT32)Status; }
-UINT32 +UINT32 agesawrapper_amdlaterunaptask ( - UINT32 Func, - UINT32 Data, + UINT32 Func, + UINT32 Data, VOID *ConfigPtr ) { @@ -499,7 +499,7 @@ agesawrapper_amdlaterunaptask ( return (UINT32)Status; }
-UINT32 +UINT32 agesawrapper_amdreadeventlog ( VOID ) diff --git a/src/mainboard/asrock/e350m1/agesawrapper.h b/src/mainboard/asrock/e350m1/agesawrapper.h index 6d7d9cd..21e43fe 100644 --- a/src/mainboard/asrock/e350m1/agesawrapper.h +++ b/src/mainboard/asrock/e350m1/agesawrapper.h @@ -21,8 +21,8 @@ * M O D U L E S U S E D *---------------------------------------------------------------------------------------- */ - - + + #ifndef _AGESAWRAPPER_H_ #define _AGESAWRAPPER_H_
@@ -66,17 +66,17 @@ typedef struct { * P R O T O T Y P E S O F L O C A L F U N C T I O N S *---------------------------------------------------------------------------------------- */ - + /*---------------------------------------------------------------------------------------- * E X P O R T E D F U N C T I O N S *---------------------------------------------------------------------------------------- */ - + /*--------------------------------------------------------------------------------------- * L O C A L F U N C T I O N S *--------------------------------------------------------------------------------------- */ - + UINT32 agesawrapper_amdinitreset (void); UINT32 agesawrapper_amdinitearly (void); UINT32 agesawrapper_amdinitenv (void); diff --git a/src/mainboard/asrock/e350m1/buildOpts.c b/src/mainboard/asrock/e350m1/buildOpts.c index cde9df7..2707605 100644 --- a/src/mainboard/asrock/e350m1/buildOpts.c +++ b/src/mainboard/asrock/e350m1/buildOpts.c @@ -16,7 +16,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ - + /** * @file * @@ -57,13 +57,13 @@ #define INSTALL_FT1_SOCKET_SUPPORT TRUE #define INSTALL_AM3_SOCKET_SUPPORT FALSE
-/* - * Agesa optional capabilities selection. +/* + * Agesa optional capabilities selection. * Uncomment and mark FALSE those features you wish to include in the build. * Comment out or mark TRUE those features you want to REMOVE from the build. */
-#define BLDOPT_REMOVE_FAMILY_10_SUPPORT TRUE +#define BLDOPT_REMOVE_FAMILY_10_SUPPORT TRUE #define BLDOPT_REMOVE_FAMILY_12_SUPPORT TRUE #define BLDOPT_REMOVE_FAMILY_14_SUPPORT FALSE #define BLDOPT_REMOVE_FAMILY_15_SUPPORT TRUE @@ -104,7 +104,7 @@ #define BLDOPT_REMOVE_HT_ASSIST TRUE #define BLDOPT_REMOVE_ATM_MODE TRUE //#define BLDOPT_REMOVE_MSG_BASED_C1E TRUE -//#define BLDOPT_REMOVE_LOW_POWER_STATE_FOR_PROCHOT TRUE +//#define BLDOPT_REMOVE_LOW_POWER_STATE_FOR_PROCHOT TRUE #define BLDOPT_REMOVE_MEM_RESTORE_SUPPORT FALSE //#define BLDOPT_REMOVE_C6_STATE TRUE #define BLDOPT_REMOVE_GFX_RECOVERY TRUE @@ -125,10 +125,10 @@ #define AGESA_ENTRY_INIT_LATE_RESTORE FALSE #define AGESA_ENTRY_INIT_GENERAL_SERVICES FALSE
-/* - * Agesa configuration values selection. +/* + * Agesa configuration values selection. * Uncomment and specify the value for the configuration options - * needed by the system. + * needed by the system. */
/* The fixed MTRR values to be set after memory initialization. */ diff --git a/src/mainboard/asrock/e350m1/dimmSpd.c b/src/mainboard/asrock/e350m1/dimmSpd.c index 8ef1b4c..24e2617 100644 --- a/src/mainboard/asrock/e350m1/dimmSpd.c +++ b/src/mainboard/asrock/e350m1/dimmSpd.c @@ -16,7 +16,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ - + #include "Porting.h" #include "AGESA.h" #include "amdlib.h" @@ -55,7 +55,7 @@ static int readSmbusByteData (int iobase, int address, char *buffer, int offset) UINT64 limit;
address |= 1; // set read bit - + __outbyte (iobase + 0, 0xFF); // clear error status __outbyte (iobase + 1, 0x1F); // clear error status __outbyte (iobase + 3, offset); // offset in eeprom @@ -112,7 +112,7 @@ static int readSmbusByte (int iobase, int address, char *buffer) * * readspd - Read one or more SPD bytes from a DIMM. * Start with offset zero and read sequentially. - * Optimization relies on autoincrement to avoid + * Optimization relies on autoincrement to avoid * sending offset for every byte. * Reads 128 bytes in 7-8 ms at 400 KHz. */ @@ -131,7 +131,7 @@ static int readspd (int iobase, int SmbusSlaveAddress, char *buffer, int count) error = readSmbusByte (iobase, SmbusSlaveAddress, &buffer [index]); if (error) return error; } - + return 0; }
@@ -154,11 +154,11 @@ AGESA_STATUS AmdMemoryReadSPD (UINT32 unused1, UINT32 unused2, AGESA_READ_SPD_PA { int spdAddress, ioBase;
- if (info->SocketId >= DIMENSION (spdAddressLookup )) return AGESA_ERROR; - if (info->MemChannelId >= DIMENSION (spdAddressLookup[0] )) return AGESA_ERROR; + if (info->SocketId >= DIMENSION (spdAddressLookup )) return AGESA_ERROR; + if (info->MemChannelId >= DIMENSION (spdAddressLookup[0] )) return AGESA_ERROR; if (info->DimmId >= DIMENSION (spdAddressLookup[0][0])) return AGESA_ERROR; - - spdAddress = spdAddressLookup [info->SocketId] [info->MemChannelId] [info->DimmId]; + + spdAddress = spdAddressLookup [info->SocketId] [info->MemChannelId] [info->DimmId]; if (spdAddress == 0) return AGESA_ERROR; ioBase = 0xB00; setupFch (ioBase); diff --git a/src/mainboard/asrock/e350m1/get_bus_conf.c b/src/mainboard/asrock/e350m1/get_bus_conf.c index 4386717..9746248 100644 --- a/src/mainboard/asrock/e350m1/get_bus_conf.c +++ b/src/mainboard/asrock/e350m1/get_bus_conf.c @@ -68,22 +68,22 @@ void get_bus_conf(void) * This is the call to AmdInitLate. It is really in the wrong place, conceptually, * but functionally within the coreboot model, this is the best place to make the * call. The logically correct place to call AmdInitLate is after PCI scan is done, - * after the decision about S3 resume is made, and before the system tables are - * written into RAM. The routine that is responsible for writing the tables is - * "write_tables", called near the end of "hardwaremain". There is no platform - * specific entry point between the S3 resume decision point and the call to - * "write_tables", and the next platform specific entry points are the calls to - * the ACPI table write functions. The first of ose would seem to be the right - * place, but other table write functions, e.g. the PIRQ table write function, are + * after the decision about S3 resume is made, and before the system tables are + * written into RAM. The routine that is responsible for writing the tables is + * "write_tables", called near the end of "hardwaremain". There is no platform + * specific entry point between the S3 resume decision point and the call to + * "write_tables", and the next platform specific entry points are the calls to + * the ACPI table write functions. The first of ose would seem to be the right + * place, but other table write functions, e.g. the PIRQ table write function, are * called before the ACPI tables are written. This routine is called at the beginning * of each of the write functions called prior to the ACPI write functions, so this * becomes the best place for this call. */ - status = agesawrapper_amdinitlate(); + status = agesawrapper_amdinitlate(); if(status) { printk(BIOS_DEBUG, "agesawrapper_amdinitlate failed: %x \n", status); } - + sbdn_sb800 = 0;
for (i = 0; i < 3; i++) { diff --git a/src/mainboard/asrock/e350m1/mptable.c b/src/mainboard/asrock/e350m1/mptable.c index 397e829..960c2c8 100644 --- a/src/mainboard/asrock/e350m1/mptable.c +++ b/src/mainboard/asrock/e350m1/mptable.c @@ -60,11 +60,11 @@ static void *smp_write_config_table(void *v) mptable_write_buses(mc, NULL, &bus_isa);
/* I/O APICs: APIC ID Version State Address */ - + device_t dev; u32 dword; u8 byte; - + ReadPMIO(SB_PMIOA_REG34, AccWidthUint32, &dword); dword &= 0xFFFFFFF0; smp_write_ioapic(mc, apicid_sb800, 0x21, dword); @@ -108,7 +108,7 @@ static void *smp_write_config_table(void *v) /* PCI_INT(0x0, 0x14, 0x2, 0x12); */
/* on board NIC & Slot PCIE. */ - + /* PCI slots */ /* PCI_SLOT 0. */ PCI_INT(bus_sb800[1], 0x5, 0x0, 0x14); diff --git a/src/mainboard/asus/m5a88-v/mainboard.c b/src/mainboard/asus/m5a88-v/mainboard.c index f778243..7fa4ee7 100644 --- a/src/mainboard/asus/m5a88-v/mainboard.c +++ b/src/mainboard/asus/m5a88-v/mainboard.c @@ -43,7 +43,7 @@ void enable_int_gfx(void) #ifdef UNUSED_CODE RWPMIO(SB_PMIOA_REGEA, AccWidthUint8, ~(BIT0), BIT0); /* Disable the PCIB */ RWPMIO(SB_PMIOA_REGF6, AccWidthuint8, ~(BIT0), BIT0); /* Disable Gec */ -#endif +#endif /* make sure the MMIO(fed80000) is accessible */ RWPMIO(SB_PMIOA_REG24, AccWidthUint8, ~(BIT0), BIT0);
diff --git a/src/mainboard/getac/p470/acpi_slic.c b/src/mainboard/getac/p470/acpi_slic.c index 5744efa..b042f36 100644 --- a/src/mainboard/getac/p470/acpi_slic.c +++ b/src/mainboard/getac/p470/acpi_slic.c @@ -1,6 +1,6 @@ /* * This file is part of the coreboot project. - * + * * Copyright (C) 2009 coresystems GmbH * * This program is free software; you can redistribute it and/or diff --git a/src/mainboard/getac/p470/acpi_tables.c b/src/mainboard/getac/p470/acpi_tables.c index 46e7b88..676d661 100644 --- a/src/mainboard/getac/p470/acpi_tables.c +++ b/src/mainboard/getac/p470/acpi_tables.c @@ -1,6 +1,6 @@ /* * This file is part of the coreboot project. - * + * * Copyright (C) 2007-2010 coresystems GmbH * * This program is free software; you can redistribute it and/or @@ -87,7 +87,7 @@ static void acpi_create_intel_hpet(acpi_hpet_t * hpet)
static long acpi_create_ecdt(acpi_ecdt_t * ecdt) { - /* Attention: Make sure these match the values from + /* Attention: Make sure these match the values from * the DSDT's ec.asl */ static const char ec_id[] = "\_SB.PCI0.LPCB.EC0"; @@ -120,7 +120,7 @@ static long acpi_create_ecdt(acpi_ecdt_t * ecdt) ecdt->ec_data.addrh = 0;
ecdt->uid = 1; // Must match _UID of the EC0 node. - + ecdt->gpe_bit = 23; // SCI interrupt within GPEx_STS
strncpy((char *)ecdt->ec_id, ec_id, strlen(ec_id)); @@ -260,7 +260,7 @@ unsigned long write_acpi_tables(unsigned long start) current += dsdt->length; memcpy(dsdt, &AmlCode, dsdt->length);
- /* Fix up global NVS region for SMI handler. The GNVS region lives + /* Fix up global NVS region for SMI handler. The GNVS region lives * in the (high) table area. The low memory map looks like this: * * 0x00000000 - 0x000003ff Real Mode IVT @@ -313,7 +313,7 @@ unsigned long write_acpi_tables(unsigned long start)
current += 0x100; ALIGN_CURRENT; - + /* And tell SMI about it */ smm_setup_structures(gnvs, NULL, smi1);
diff --git a/src/mainboard/getac/p470/chip.h b/src/mainboard/getac/p470/chip.h index db732d2..b75c381 100644 --- a/src/mainboard/getac/p470/chip.h +++ b/src/mainboard/getac/p470/chip.h @@ -1,6 +1,6 @@ /* * This file is part of the coreboot project. - * + * * Copyright (C) 2007-2009 coresystems GmbH * * This program is free software; you can redistribute it and/or diff --git a/src/mainboard/getac/p470/ec_oem.c b/src/mainboard/getac/p470/ec_oem.c index 30d4135..f742f3f 100644 --- a/src/mainboard/getac/p470/ec_oem.c +++ b/src/mainboard/getac/p470/ec_oem.c @@ -36,7 +36,7 @@ int send_ec_oem_command(u8 command) printk(BIOS_SPEW, "."); } if (!timeout) { - printk(BIOS_DEBUG, "Timeout while sending OEM command 0x%02x to EC!\n", + printk(BIOS_DEBUG, "Timeout while sending OEM command 0x%02x to EC!\n", command); // return -1; } @@ -124,7 +124,7 @@ int ec_oem_dump_status(void) if (ec_sc & (1 << 1)) printk(BIOS_DEBUG, "IBF "); if (ec_sc & (1 << 0)) printk(BIOS_DEBUG, "OBF "); printk(BIOS_DEBUG, "\n"); - + return ec_sc; }
diff --git a/src/mainboard/getac/p470/hda_verb.h b/src/mainboard/getac/p470/hda_verb.h index 0edd0f3..98a77c6 100644 --- a/src/mainboard/getac/p470/hda_verb.h +++ b/src/mainboard/getac/p470/hda_verb.h @@ -1,6 +1,6 @@ /* * This file is part of the coreboot project. - * + * * Copyright (C) 2007-2009 coresystems GmbH * * This program is free software; you can redistribute it and/or diff --git a/src/mainboard/getac/p470/mainboard.c b/src/mainboard/getac/p470/mainboard.c index 8f8a395..b7a248d 100644 --- a/src/mainboard/getac/p470/mainboard.c +++ b/src/mainboard/getac/p470/mainboard.c @@ -32,7 +32,7 @@
#define MAX_LCD_BRIGHTNESS 0xd8
-static void ec_enable(void) +static void ec_enable(void) { u16 keymap; /* Enable Hotkey SCI */ @@ -59,11 +59,11 @@ static void pcie_limit_power(void) { #if 0 // This piece of code needs further debugging as it crashes the - // machine. It should set the slot numbers and enable power + // machine. It should set the slot numbers and enable power // limitation for the PCIe slots.
device_t dev; - + dev = dev_find_slot(0, PCI_DEVFN(28,0)); if (dev) pci_write_config32(dev, 0x54, 0x0010a0e0);
@@ -89,9 +89,9 @@ static void mainboard_init(device_t dev) ec_enable(); }
-// mainboard_enable is executed as first thing after +// mainboard_enable is executed as first thing after // enumerate_buses(). Is there no mainboard_init()? -static void mainboard_enable(device_t dev) +static void mainboard_enable(device_t dev) { dev->ops->init = mainboard_init; pcie_limit_power(); diff --git a/src/mainboard/getac/p470/mainboard_smi.c b/src/mainboard/getac/p470/mainboard_smi.c index d29fe58..4a5a3ff 100644 --- a/src/mainboard/getac/p470/mainboard_smi.c +++ b/src/mainboard/getac/p470/mainboard_smi.c @@ -30,7 +30,7 @@
#define MAX_LCD_BRIGHTNESS 0xd8
-/* The southbridge SMI handler checks whether gnvs has a +/* The southbridge SMI handler checks whether gnvs has a * valid pointer before calling the trap handler */ extern global_nvs_t *gnvs; diff --git a/src/mainboard/getac/p470/romstage.c b/src/mainboard/getac/p470/romstage.c index 6fa2620..afad4bc 100644 --- a/src/mainboard/getac/p470/romstage.c +++ b/src/mainboard/getac/p470/romstage.c @@ -1,6 +1,6 @@ /* * This file is part of the coreboot project. - * + * * Copyright (C) 2007-2009 coresystems GmbH * * This program is free software; you can redistribute it and/or @@ -320,7 +320,7 @@ void main(unsigned long bist)
/* Enable SPD ROMs and DDR-II DRAM */ enable_smbus(); - + #if CONFIG_DEFAULT_CONSOLE_LOGLEVEL > 8 dump_spd_registers(); #endif @@ -330,8 +330,8 @@ void main(unsigned long bist) /* Perform some initialization that must run before stage2 */ early_ich7_init();
- /* This should probably go away. Until now it is required - * and mainboard specific + /* This should probably go away. Until now it is required + * and mainboard specific */ rcba_config();
@@ -373,7 +373,7 @@ void main(unsigned long bist) * memory completely, but that's a wonderful clean up task for another * day. */ - if (resume_backup_memory) + if (resume_backup_memory) memcpy(resume_backup_memory, (void *)CONFIG_RAMBASE, HIGH_MEMORY_SAVE);
/* Magic for S3 resume */ diff --git a/src/mainboard/getac/p470/rtl8168.c b/src/mainboard/getac/p470/rtl8168.c index f0f98d2..37ef674 100644 --- a/src/mainboard/getac/p470/rtl8168.c +++ b/src/mainboard/getac/p470/rtl8168.c @@ -29,7 +29,7 @@ static void nic_init(struct device *dev) { printk(BIOS_DEBUG, "Initializing RTL8168 Gigabit Ethernet\n"); - // Nothing to do yet, but this has to be here to keep + // Nothing to do yet, but this has to be here to keep // coreboot from trying to execute an option ROM.
#ifdef RTL8168_DEBUG diff --git a/src/mainboard/gigabyte/m57sli/mainboard.c b/src/mainboard/gigabyte/m57sli/mainboard.c index 3b7eb7d..b198fb6 100644 --- a/src/mainboard/gigabyte/m57sli/mainboard.c +++ b/src/mainboard/gigabyte/m57sli/mainboard.c @@ -34,7 +34,7 @@ static void verb_setup(void) // cim_verb_data_size = sizeof(mainboard_cim_verb_data); }
-static void mainboard_enable(device_t dev) +static void mainboard_enable(device_t dev) { verb_setup(); } diff --git a/src/mainboard/hp/dl165_g6_fam10/romstage.c b/src/mainboard/hp/dl165_g6_fam10/romstage.c index d40df6b..32a94d4 100644 --- a/src/mainboard/hp/dl165_g6_fam10/romstage.c +++ b/src/mainboard/hp/dl165_g6_fam10/romstage.c @@ -105,7 +105,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE); u32 bsp_apicid = 0, val; msr_t msr; - + if (!cpu_init_detectedx && boot_cpu()) { /* Nothing special needs to be done to find bus 0 */ /* Allow the HT devices to be found */ diff --git a/src/mainboard/msi/ms9282/mainboard.c b/src/mainboard/msi/ms9282/mainboard.c index bbb1024..99f7e22 100644 --- a/src/mainboard/msi/ms9282/mainboard.c +++ b/src/mainboard/msi/ms9282/mainboard.c @@ -34,7 +34,7 @@ static void verb_setup(void) // cim_verb_data_size = sizeof(mainboard_cim_verb_data); }
-static void mainboard_enable(device_t dev) +static void mainboard_enable(device_t dev) { verb_setup(); } diff --git a/src/mainboard/msi/ms9652_fam10/mainboard.c b/src/mainboard/msi/ms9652_fam10/mainboard.c index af793c7..255b22d 100644 --- a/src/mainboard/msi/ms9652_fam10/mainboard.c +++ b/src/mainboard/msi/ms9652_fam10/mainboard.c @@ -34,7 +34,7 @@ static void verb_setup(void) // cim_verb_data_size = sizeof(mainboard_cim_verb_data); }
-static void mainboard_enable(device_t dev) +static void mainboard_enable(device_t dev) { verb_setup(); } diff --git a/src/mainboard/nvidia/l1_2pvv/hda_verb.h b/src/mainboard/nvidia/l1_2pvv/hda_verb.h index 0b7aac8..054a369 100644 --- a/src/mainboard/nvidia/l1_2pvv/hda_verb.h +++ b/src/mainboard/nvidia/l1_2pvv/hda_verb.h @@ -1,6 +1,6 @@ /* * This file is part of the coreboot project. - * + * * Copyright (C) 2004 Tyan Computer * Copyright (C) 2006-2007 AMD * Copyright (C) 2007-2009 coresystems GmbH diff --git a/src/mainboard/nvidia/l1_2pvv/mainboard.c b/src/mainboard/nvidia/l1_2pvv/mainboard.c index 4c6f0c0..b425c3d 100644 --- a/src/mainboard/nvidia/l1_2pvv/mainboard.c +++ b/src/mainboard/nvidia/l1_2pvv/mainboard.c @@ -33,7 +33,7 @@ static void verb_setup(void) cim_verb_data_size = sizeof(mainboard_cim_verb_data); }
-static void mainboard_enable(device_t dev) +static void mainboard_enable(device_t dev) { verb_setup(); } diff --git a/src/mainboard/siemens/sitemp_g1p1/acpi_tables.c b/src/mainboard/siemens/sitemp_g1p1/acpi_tables.c index fd731f9..b79372a 100644 --- a/src/mainboard/siemens/sitemp_g1p1/acpi_tables.c +++ b/src/mainboard/siemens/sitemp_g1p1/acpi_tables.c @@ -128,13 +128,13 @@ unsigned long acpi_fill_mcfg(unsigned long current) { struct resource *res; resource_t mmconf_base = EXT_CONF_BASE_ADDRESS; // default - + device_t dev = dev_find_slot(0,PCI_DEVFN(0,0)); // we report mmconf base res = probe_resource(dev, 0x1C); if( res ) mmconf_base = res->base; - + current += acpi_create_mcfg_mmconfig((acpi_mcfg_mmconfig_t *)current, mmconf_base, 0x0, 0x0, 0x1f); // Fix me: should i reserve 255 busses ?
return current; @@ -180,7 +180,7 @@ unsigned long write_acpi_tables(unsigned long start) { unsigned long current; int i; - + acpi_rsdp_t *rsdp; acpi_rsdt_t *rsdt; acpi_srat_t *srat; @@ -192,7 +192,7 @@ unsigned long write_acpi_tables(unsigned long start) acpi_facs_t *facs; acpi_header_t *dsdt; acpi_header_t *ssdt; - + get_bus_conf(); /* it will get sblk, pci1234, hcdn, and sbdn */
/* Align ACPI tables to 16byte */ @@ -204,14 +204,14 @@ unsigned long write_acpi_tables(unsigned long start) /* We need at least an RSDP and an RSDT Table */ rsdp = (acpi_rsdp_t *) current; current += sizeof(acpi_rsdp_t); - ALIGN_CURRENT; + ALIGN_CURRENT; rsdt = (acpi_rsdt_t *) current; current += sizeof(acpi_rsdt_t); ALIGN_CURRENT; xsdt = (acpi_xsdt_t *) current; current += sizeof(acpi_xsdt_t); ALIGN_CURRENT; - + /* clear all table memory */ memset((void *)start, 0, current - start);
@@ -234,7 +234,7 @@ unsigned long write_acpi_tables(unsigned long start) acpi_create_my_hpet(hpet); current += sizeof(acpi_hpet_t); acpi_add_table(rsdp, hpet); - + /* If we want to use HPET Timers Linux wants an MADT */ printk(BIOS_DEBUG, "ACPI: * MADT\n"); madt = (acpi_madt_t *) current; @@ -247,15 +247,15 @@ unsigned long write_acpi_tables(unsigned long start) mcfg = (acpi_mcfg_t *) current; acpi_create_mcfg(mcfg); current += mcfg->header.length; - acpi_add_table(rsdp, mcfg); - + acpi_add_table(rsdp, mcfg); + /* SSDT */ printk(BIOS_DEBUG, "ACPI: * SSDT\n"); ssdt = (acpi_header_t *)current; acpi_create_ssdt_generator(ssdt, ACPI_TABLE_CREATOR); current += ssdt->length; - acpi_add_table(rsdp, ssdt); - + acpi_add_table(rsdp, ssdt); + /* DSDT */ printk(BIOS_DEBUG, "ACPI: * DSDT\n"); dsdt = (acpi_header_t *)current; @@ -267,7 +267,7 @@ unsigned long write_acpi_tables(unsigned long start) for (i=0; i < dsdt->length; i++) { if (*(u32*)(((u32)dsdt) + i) == 0xBADEAFFE) { printk(BIOS_DEBUG, "ACPI: Patching up globals in DSDT at offset 0x%04x -> 0x%08lx\n", i, current); - *(u32*)(((u32)dsdt) + i) = current; + *(u32*)(((u32)dsdt) + i) = current; break; } } @@ -277,8 +277,8 @@ unsigned long write_acpi_tables(unsigned long start) current += GLOBAL_VARS_SIZE; /* We patched up the DSDT, so we need to recalculate the checksum */ dsdt->checksum = 0; - dsdt->checksum = acpi_checksum((void *)dsdt, dsdt->length); - printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n", dsdt, dsdt->length); + dsdt->checksum = acpi_checksum((void *)dsdt, dsdt->length); + printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n", dsdt, dsdt->length);
/* FADT */ printk(BIOS_DEBUG, "ACPI: * FADT\n"); diff --git a/src/mainboard/siemens/sitemp_g1p1/int15_func.c b/src/mainboard/siemens/sitemp_g1p1/int15_func.c index 0d2da37..c653191 100644 --- a/src/mainboard/siemens/sitemp_g1p1/int15_func.c +++ b/src/mainboard/siemens/sitemp_g1p1/int15_func.c @@ -20,7 +20,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ - + #include <stdint.h> #include <stdlib.h> #include <console/console.h> @@ -80,7 +80,7 @@ int sbios_INT15_handler(struct eregs *regs) regs->eax &= ~(0xff); regs->ebx &= ~(0xff); printk(BIOS_DEBUG, "Integrated System Information = %x:%x\n", regs->edx, regs->edi); - vgainfo_addr = (regs->edx * 16) + regs->edi; + vgainfo_addr = (regs->edx * 16) + regs->edi; res = 0; break; case 0x89: diff --git a/src/mainboard/siemens/sitemp_g1p1/mainboard.c b/src/mainboard/siemens/sitemp_g1p1/mainboard.c index 2b726f9..60a2ee2 100644 --- a/src/mainboard/siemens/sitemp_g1p1/mainboard.c +++ b/src/mainboard/siemens/sitemp_g1p1/mainboard.c @@ -4,7 +4,7 @@ * Copyright (C) 2008 Advanced Micro Devices, Inc. * Copyright (C) 2010 Siemens AG, Inc. * (Written by Josef Kellermann joseph.kellermann@heitec.de for Siemens AG, Inc.) - * + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; version 2 of the License. @@ -18,7 +18,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ - + #include <console/console.h> #include <device/device.h> #include <device/pci.h> @@ -172,7 +172,7 @@ static u32 adt7475_address = ADT7475_ADDRESS;
#define adt7475_write_byte(reg, val) \ do_smbus_write_byte(smbus_io_base, adt7475_address, reg, val) - + #define TWOS_COMPL 1
struct __table__{ @@ -284,9 +284,9 @@ static void int15_install(void) /* ############################################################################################# */
/** - * @brief + * @brief * - * @param + * @param */
static u8 calc_trange(u8 t_min, u8 t_max) { @@ -294,7 +294,7 @@ static u8 calc_trange(u8 t_min, u8 t_max) { u8 prev; int i; int diff = t_max - t_min; - + // walk through the trange table for(i = 0, prev = 0; i < sizeof(trange)/sizeof(int); i++) { if( trange[i] < diff ) { @@ -304,7 +304,7 @@ static u8 calc_trange(u8 t_min, u8 t_max) { if( diff == trange[i] ) return i; if( (diff - trange[prev]) < (trange[i] - diff) ) break; // return with last val index return i; - } + } return prev; }
@@ -319,7 +319,7 @@ static void cable_detect(void) u8 byte; struct device *sm_dev; struct device *ide_dev; - + /* SMBus Module and ACPI Block (Device 20, Function 0) on SB600 */ printk(BIOS_DEBUG, "%s.\n", __func__); sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); @@ -327,7 +327,7 @@ static void cable_detect(void) byte = pci_read_config8(sm_dev, 0xA9); byte |= (1 << 5); /* Set Gpio9 as input */ pci_write_config8(sm_dev, 0xA9, byte); - + /* IDE Controller (Device 20, Function 1) on SB600 */ ide_dev = dev_find_slot(0, PCI_DEVFN(0x14, 1));
@@ -347,14 +347,14 @@ static void cable_detect(void) /** * @brief Detect the ADT7475 device * - * @param + * @param */ - + static const char * adt7475_detect( void ) {
int vendid, devid, devid2; const char *name = NULL; - + vendid = adt7475_read_byte(REG_VENDID); devid2 = adt7475_read_byte(REG_DEVID2); if (vendid != 0x41 || /* Analog Devices */ @@ -371,7 +371,7 @@ static const char * adt7475_detect( void ) { name = "adt7476"; else if ((devid2 & 0xfc) == 0x6c) name = "adt7490"; - + return name; }
@@ -396,7 +396,7 @@ const struct fan_control case_fan_control_defaults = { static void pm_init( void ) { u16 word; - u8 byte; + u8 byte; device_t sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0));
/* set SB600 GPIO 64 to GPIO with pull-up */ @@ -423,7 +423,7 @@ static void pm_init( void ) byte = pm_ioread(0x3c); byte &= 0xf3; pm_iowrite(0x3c, byte); - + /* set GPM5 to not wake from s5 */ byte = pm_ioread(0x77); byte &= ~(1 << 5); @@ -433,7 +433,7 @@ static void pm_init( void ) /** * @brief Setup thermal config on SINA Mainboard * - * @param + * @param */
static void set_thermal_config(void) @@ -443,17 +443,17 @@ static void set_thermal_config(void) device_t sm_dev; struct fan_control cpu_fan_control, case_fan_control; const char *name = NULL; - - + + sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); smbus_io_base = pci_read_config32(sm_dev, 0x10) & ~(0xf); // get BAR0-Address which holds the SMBUS_IO_BASE - + if( (name = adt7475_detect()) == NULL ) { printk(BIOS_NOTICE, "Couldn't detect an ADT7473/75/76/90 part at %x:%x\n", smbus_io_base, adt7475_address); return; } printk(BIOS_DEBUG, "Found %s part at %x:%x\n", name, smbus_io_base, adt7475_address); - + cpu_fan_control = cpu_fan_control_defaults; case_fan_control = case_fan_control_defaults;
@@ -463,7 +463,7 @@ static void set_thermal_config(void) // get all the options needed if( get_option(&byte, "cpu_fan_control") == 0 ) cpu_fan_control.enable = byte ? 1 : 0; - + get_option(&cpu_fan_control.polarity, "cpu_fan_polarity"); get_option(&cpu_fan_control.t_min, "cpu_t_min"); get_option(&cpu_fan_control.t_max, "cpu_t_max"); @@ -471,13 +471,13 @@ static void set_thermal_config(void) get_option(&cpu_fan_control.pwm_max, "cpu_dutycycle_max");
if( get_option(&byte, "chassis_fan_control") == 0) - case_fan_control.enable = byte ? 1 : 0; - get_option(&case_fan_control.polarity, "chassis_fan_polarity"); + case_fan_control.enable = byte ? 1 : 0; + get_option(&case_fan_control.polarity, "chassis_fan_polarity"); get_option(&case_fan_control.t_min, "chassis_t_min"); get_option(&case_fan_control.t_max, "chassis_t_max"); get_option(&case_fan_control.pwm_min, "chassis_dutycycle_min"); get_option(&case_fan_control.pwm_max, "chassis_dutycycle_max"); - + }
printk(BIOS_DEBUG, "cpu_fan_control:%s", cpu_fan_control.enable ? "enable" : "disable"); @@ -485,50 +485,50 @@ static void set_thermal_config(void)
printk(BIOS_DEBUG, " cpu_t_min:%s", TEMPERATURE_INFO(cpu_fan_control.t_min)); cpu_fan_control.t_min = TEMPERATURE(cpu_fan_control.t_min, cpu_fan_control_defaults.t_min); - + printk(BIOS_DEBUG, " cpu_t_max:%s", TEMPERATURE_INFO(cpu_fan_control.t_max)); cpu_fan_control.t_max = TEMPERATURE(cpu_fan_control.t_max, cpu_fan_control_defaults.t_max); - + printk(BIOS_DEBUG, " cpu_pwm_min:%s", DUTYCYCLE_INFO(cpu_fan_control.pwm_min)); cpu_fan_control.pwm_min = DUTYCYCLE(cpu_fan_control.pwm_min, cpu_fan_control_defaults.pwm_min); - + printk(BIOS_DEBUG, " cpu_pwm_max:%s", DUTYCYCLE_INFO(cpu_fan_control.pwm_max)); cpu_fan_control.pwm_max = DUTYCYCLE(cpu_fan_control.pwm_max, cpu_fan_control_defaults.pwm_max); - + cpu_fan_control.t_range = calc_trange(cpu_fan_control.t_min, cpu_fan_control.t_max); printk(BIOS_DEBUG, " cpu_t_range:0x%02x\n", cpu_fan_control.t_range); cpu_fan_control.t_range <<= 4; cpu_fan_control.t_range |= (4 << 0); // 35.3Hz - + printk(BIOS_DEBUG, "chassis_fan_control:%s", case_fan_control.enable ? "enable" : "disable"); printk(BIOS_DEBUG, " chassis_fan_polarity:%s", case_fan_control.polarity ? "low" : "high");
printk(BIOS_DEBUG, " chassis_t_min:%s", TEMPERATURE_INFO(case_fan_control.t_min)); case_fan_control.t_min = TEMPERATURE(case_fan_control.t_min, case_fan_control_defaults.t_min); - + printk(BIOS_DEBUG, " chassis_t_max:%s", TEMPERATURE_INFO(case_fan_control.t_max)); case_fan_control.t_max = TEMPERATURE(case_fan_control.t_max, case_fan_control_defaults.t_max); - + printk(BIOS_DEBUG, " chassis_pwm_min:%s", DUTYCYCLE_INFO(case_fan_control.pwm_min)); case_fan_control.pwm_min = DUTYCYCLE(case_fan_control.pwm_min, case_fan_control_defaults.pwm_min); - + printk(BIOS_DEBUG, " chassis_pwm_max:%s", DUTYCYCLE_INFO(case_fan_control.pwm_max)); case_fan_control.pwm_max = DUTYCYCLE(case_fan_control.pwm_max, case_fan_control_defaults.pwm_max); - + case_fan_control.t_range = calc_trange(case_fan_control.t_min, case_fan_control.t_max); printk(BIOS_DEBUG, " case_t_range:0x%02x\n", case_fan_control.t_range); case_fan_control.t_range <<= 4; case_fan_control.t_range |= (4 << 0); // 35.3Hz - + cpu_pwm_conf = (((cpu_fan_control.polarity & 0x1) << 4) | 0x2); // bit 4 control polarity of PWMx output case_pwm_conf = (((case_fan_control.polarity & 0x1) << 4) | 0x2); // bit 4 control polarity of PWMx output - cpu_pwm_conf |= cpu_fan_control.enable ? (0 << 5) : (7 << 5); // manual control + cpu_pwm_conf |= cpu_fan_control.enable ? (0 << 5) : (7 << 5); // manual control case_pwm_conf |= case_fan_control.enable ? (1 << 5) : (7 << 5); // local temp - + /* set adt7475 */
adt7475_write_byte(REG_CONFIG1, 0x04); // clear register, bit 2 is read only - + /* Config Register 6: */ adt7475_write_byte(REG_CONFIG6, 0x00); /* Config Register 7 */ @@ -536,14 +536,14 @@ static void set_thermal_config(void)
/* Config Register 5: */ /* set Offset 64 format, enable THERM on Remote 1& Local */ - adt7475_write_byte(REG_CONFIG5, TWOS_COMPL ? 0x61 : 0x60); + adt7475_write_byte(REG_CONFIG5, TWOS_COMPL ? 0x61 : 0x60); /* No offset for remote 1 */ adt7475_write_byte(TEMP_OFFSET_REG(0), 0x00); /* No offset for local */ adt7475_write_byte(TEMP_OFFSET_REG(1), 0x00); /* No offset for remote 2 */ adt7475_write_byte(TEMP_OFFSET_REG(2), 0x00); - + /* remote 1 low temp limit */ adt7475_write_byte(TEMP_MIN_REG(0), 0x00); /* remote 1 High temp limit (90C) */ @@ -558,7 +558,7 @@ static void set_thermal_config(void) adt7475_write_byte(TEMP_THERM_REG(0), 0x9f); /* local therm temp limit (95C) */ adt7475_write_byte(TEMP_THERM_REG(1), 0x9f); - + /* PWM 1 configuration register CPU fan controlled by CPU Thermal Diode */ adt7475_write_byte(PWM_CONFIG_REG(0), cpu_pwm_conf); /* PWM 3 configuration register Case fan controlled by ADTxxxx temp */ @@ -576,7 +576,7 @@ static void set_thermal_config(void) } else { adt7475_write_byte(PWM_REG(0), cpu_fan_control.pwm_max); } - + if( case_fan_control.enable ) { /* PWM 2 minimum duty cycle (37%) */ adt7475_write_byte(PWM_MIN_REG(2), case_fan_control.pwm_min); @@ -597,10 +597,10 @@ static void set_thermal_config(void) adt7475_write_byte(0x7d, 0x09); /* Interrupt Mask Register 2 - Mask SMB alert for Therm Conditions, Fan 3 fault, SmbAlert Fan for Therm Timer event */ adt7475_write_byte(0x75, 0x2e); - + /* Config Register 1 Set Start bit */ adt7475_write_byte(0x40, 0x05); - + /* Read status register to clear any old errors */ byte2 = adt7475_read_byte(0x42); byte = adt7475_read_byte(0x41); @@ -611,20 +611,20 @@ static void set_thermal_config(void) }
/** - * @brief + * @brief * - * @param + * @param */
static void patch_mmio_nonposted( void ) { - unsigned reg, index; + unsigned reg, index; resource_t rbase, rend; u32 base, limit; struct resource *resource; device_t dev; device_t k8_f1 = dev_find_slot(0, PCI_DEVFN(0x18,1)); - + printk(BIOS_DEBUG,"%s ...\n", __func__);
dev = dev_find_slot(1, PCI_DEVFN(5,0)); @@ -637,7 +637,7 @@ static void patch_mmio_nonposted( void ) rbase = (resource->base >> 8) & ~(0xff); /* Get the limit (rounded up) */ rend = (resource_end(resource) >> 8) & ~(0xff); - + printk(BIOS_DEBUG,"%s %x base = %0llx limit = %0llx\n", dev_path(dev), index, rbase, rend);
for( reg = 0xb8; reg >= 0x80; reg -= 8 ) { @@ -645,9 +645,9 @@ static void patch_mmio_nonposted( void ) limit = pci_read_config32(k8_f1,reg+4); printk(BIOS_DEBUG," %02x[%08x] %02x[%08x]", reg, base, reg+4, limit); if( ((base & ~(0xff)) == rbase) && ((limit & ~(0xff)) == rend) ) { - limit |= (1 << 7); + limit |= (1 << 7); printk(BIOS_DEBUG, "\nPatching %s %x <- %08x", dev_path(k8_f1), reg, limit); - pci_write_config32(k8_f1, reg+4, limit); + pci_write_config32(k8_f1, reg+4, limit); break; } } @@ -656,22 +656,22 @@ static void patch_mmio_nonposted( void ) }
/** - * @brief + * @brief * - * @param + * @param */ - + static void wait_pepp( void ) {
int boot_delay = 0; - + if( get_option(&boot_delay, "boot_delay") < 0) boot_delay = 5; - + printk(BIOS_DEBUG, "boot_delay = %d sec\n", boot_delay); if ( boot_delay > 0 ) { init_timer(); - // wait for PEPP-Board + // wait for PEPP-Board printk(BIOS_INFO, "Give PEPP-Board %d sec(s) time to coming up ", boot_delay); while ( boot_delay ) { lapic_write(LAPIC_TMICT, 0xffffffff); @@ -684,9 +684,9 @@ static void wait_pepp( void ) { }
/** - * @brief + * @brief * - * @param + * @param */
struct { @@ -700,13 +700,13 @@ struct { {0, PCI_DEVFN(5,0)},{0, PCI_DEVFN(5,2)}, {255,0}, }; - +
static void update_subsystemid( device_t dev ) {
int i; struct mainboard_config *mb = dev->chip_info; - + dev->subsystem_vendor = 0x110a; if( mb->plx_present ){ dev->subsystem_device = 0x4076; // U1P1 = 0x4076, U1P0 = 0x4077 @@ -725,9 +725,9 @@ static void update_subsystemid( device_t dev ) { }
/** - * @brief + * @brief * - * @param + * @param */
static void detect_hw_variant( device_t dev ) { @@ -736,7 +736,7 @@ static void detect_hw_variant( device_t dev ) { struct southbridge_amd_rs690_config *cfg; u32 lc_state, id = 0; struct mainboard_config *mb = dev->chip_info; - + printk(BIOS_INFO, "Scan for PLX device ...\n"); nb_dev = dev_find_slot(0, PCI_DEVFN(0, 0)); if (!nb_dev) { @@ -769,19 +769,19 @@ static void detect_hw_variant( device_t dev ) { struct device dummy; u32 pci_primary_bus, buses; u16 secondary, subordinate; - - printk(BIOS_DEBUG, "Scan for PLX bridge behind %s[%x]\n", dev_path(dev2), pci_read_config32(dev2, PCI_VENDOR_ID)); + + printk(BIOS_DEBUG, "Scan for PLX bridge behind %s[%x]\n", dev_path(dev2), pci_read_config32(dev2, PCI_VENDOR_ID)); // save the existing primary/secondary/subordinate bus number configuration. secondary = dev2->bus->secondary; subordinate = dev2->bus->subordinate; buses = pci_primary_bus = pci_read_config32(dev2, PCI_PRIMARY_BUS);
// Configure the bus numbers for this bridge - // bus number 1 is for internal gfx device, so we start with busnumber 2 + // bus number 1 is for internal gfx device, so we start with busnumber 2
buses &= 0xff000000; buses |= ((2 << 8) | (0xff << 16)); - // setup the buses in device 2 + // setup the buses in device 2 pci_write_config32(dev2,PCI_PRIMARY_BUS, buses);
// fake a device descriptor for a device behind device 2 @@ -795,7 +795,7 @@ static void detect_hw_variant( device_t dev ) { /* Have we found something? * Some broken boards return 0 if a slot is empty, but * the expected answer is 0xffffffff - */ + */ if ((id == 0xffffffff) || (id == 0x00000000) || (id == 0x0000ffff) || (id == 0xffff0000)) { printk(BIOS_DEBUG, "%s, bad id 0x%x\n", dev_path(&dummy), id); } else { @@ -810,8 +810,8 @@ static void detect_hw_variant( device_t dev ) { default: break; } - - mb->plx_present = 0; + + mb->plx_present = 0; if( id == PLX_VIDDID ){ printk(BIOS_INFO, "found PLX device\n"); mb->plx_present = 1; @@ -822,7 +822,7 @@ static void detect_hw_variant( device_t dev ) { cfg->gfx_link_width = 4; } return; - } + } }
static void smm_lock( void ) @@ -841,16 +841,16 @@ static void smm_lock( void ) * * @param the root device */ - + static void init(device_t dev) { #if CONFIG_PCI_OPTION_ROM_RUN_YABEL == 0 INT15_function_extensions int15_func; #endif - + printk(BIOS_DEBUG, "%s %s[%x/%x] %s\n", dev->chip_ops->name, dev_path(dev), dev->subsystem_vendor, dev->subsystem_device, __func__); - + #if CONFIG_PCI_OPTION_ROM_RUN_YABEL == 0 if( get_option(&int15_func.regs.func00_LCD_panel_id, "lcd_panel_id") < 0 ) int15_func.regs.func00_LCD_panel_id = PANEL_TABLE_ID_NO; @@ -870,7 +870,7 @@ static void init(device_t dev) *************************************************/ static void enable_dev(device_t dev) { - + printk(BIOS_INFO, "%s %s[%x/%x] %s\n", dev->chip_ops->name, dev_path(dev), dev->subsystem_vendor, dev->subsystem_device, __func__); #if CONFIG_PCI_OPTION_ROM_RUN_YABEL @@ -880,19 +880,19 @@ static void enable_dev(device_t dev)
detect_hw_variant(dev); update_subsystemid(dev); - + #if (CONFIG_GFXUMA == 1) { msr_t msr, msr2; - + /* TOP_MEM: the top of DRAM below 4G */ msr = rdmsr(TOP_MEM); printk(BIOS_DEBUG, "%s, TOP MEM: msr.lo = 0x%08x, msr.hi = 0x%08x\n", __func__, msr.lo, msr.hi); - + /* TOP_MEM2: the top of DRAM above 4G */ msr2 = rdmsr(TOP_MEM2); - + printk(BIOS_DEBUG, "%s, TOP MEM2: msr.lo = 0x%08x, msr.hi = 0x%08x\n", __func__, msr2.lo, msr2.hi);
@@ -915,7 +915,7 @@ static void enable_dev(device_t dev) }
uma_memory_base = msr.lo - uma_memory_size; /* TOP_MEM1 */ - + printk(BIOS_INFO, "%s: uma size 0x%08llx, memory start 0x%08llx\n", __func__, uma_memory_size, uma_memory_base);
@@ -927,20 +927,20 @@ static void enable_dev(device_t dev) #endif
wait_pepp(); - dev->ops->init = init; // rest of mainboard init later + dev->ops->init = init; // rest of mainboard init later }
/** - * @brief + * @brief * - * @param + * @param */
int add_mainboard_resources(struct lb_memory *mem) { device_t dev; struct resource *res; - + dev = dev_find_slot(0, PCI_DEVFN(0,0)); res = probe_resource(dev, 0x1C); if( res ) { diff --git a/src/mainboard/siemens/sitemp_g1p1/mptable.c b/src/mainboard/siemens/sitemp_g1p1/mptable.c index 9e4a6db..ba2c1e4 100644 --- a/src/mainboard/siemens/sitemp_g1p1/mptable.c +++ b/src/mainboard/siemens/sitemp_g1p1/mptable.c @@ -38,7 +38,7 @@ static void *smp_write_config_table(void *v) { struct mp_config_table *mc; int isa_bus; - + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); mptable_init(mc, LAPIC_ADDR); smp_write_processors(mc); diff --git a/src/mainboard/siemens/sitemp_g1p1/romstage.c b/src/mainboard/siemens/sitemp_g1p1/romstage.c index 09aa1d7..b570d45 100644 --- a/src/mainboard/siemens/sitemp_g1p1/romstage.c +++ b/src/mainboard/siemens/sitemp_g1p1/romstage.c @@ -18,7 +18,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ - + #define RC0 (6<<8) #define RC1 (7<<8)
@@ -177,7 +177,7 @@ static inline void check_cmos( void ) { outb(0x0a,0x72); i = inb(0x73); i &= ~(1 << 4); - outb(i,0x73); + outb(i,0x73);
for (i = 14; i < 128; i++) { #if DUMP_CMOS_RAM @@ -198,7 +198,7 @@ static inline void check_cmos( void ) { /* Now reboot to run with default cmos. */ outb(0x06, 0xcf9); for (;;) asm("hlt"); /* Wait for reset! */ - } + } }
// update altcentury @@ -221,7 +221,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) msr_t msr; struct cpuid_result cpuid1; struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE); - + if (!cpu_init_detectedx && boot_cpu()) { /* Nothing special needs to be done to find bus 0 */ /* Allow the HT devices to be found */ @@ -237,19 +237,19 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
enable_rs690_dev8(); // enable CFG access to Dev8, which is the SB P2P Bridge sb600_lpc_init(); -#if defined(DUMP_CMOS_RAM) && (DUMP_CMOS_RAM == 0) - check_cmos(); // rebooting in case of corrupted cmos !!!!! -#endif +#if defined(DUMP_CMOS_RAM) && (DUMP_CMOS_RAM == 0) + check_cmos(); // rebooting in case of corrupted cmos !!!!! +#endif /* it8712f_enable_serial does not use its 1st parameter. */ it8712f_enable_serial(0, CONFIG_TTYS0_BASE); - it8712f_kill_watchdog(); + it8712f_kill_watchdog();
console_init(); #if defined(DUMP_CMOS_RAM) && (DUMP_CMOS_RAM == 1) - check_cmos(); // rebooting in case of corrupted cmos !!!!! + check_cmos(); // rebooting in case of corrupted cmos !!!!! #endif post_code(0x03); - + /* Halt if there was a built in self test failure */ report_bist_failure(bist); __DEBUG__("bsp_apicid=0x%x\n", bsp_apicid); @@ -270,9 +270,9 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) /* run _early_setup before soft-reset. */ rs690_early_setup(); sb600_early_setup(); - + post_code(0x04); - + /* Check to see if processor is capable of changing FIDVID */ /* otherwise it will throw a GP# when reading FIDVID_STATUS */ cpuid1 = cpuid(0x80000007); @@ -293,16 +293,16 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) } else { __DEBUG__("Changing FIDVID not supported\n"); } - + post_code(0x05); - + needs_reset = optimize_link_coherent_ht(); needs_reset |= optimize_link_incoherent_ht(sysinfo); rs690_htinit(); __DEBUG__("needs_reset=0x%x\n", needs_reset); - + post_code(0x06); - + if (needs_reset) { __INFO__("ht reset -\n"); soft_reset(); @@ -314,19 +314,19 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) __DEBUG__("sysinfo->nodes: %2x sysinfo->ctrl: %p spd_addr: %p\n", sysinfo->nodes, sysinfo->ctrl, spd_addr); fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - + post_code(0x07); - + sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); - + post_code(0x08); - + rs690_before_pci_init(); // does nothing sb600_before_pci_init(); - -#if CONFIG_USE_OPTION_TABLE + +#if CONFIG_USE_OPTION_TABLE if( read_option(cmos_defaults_loaded, 0) ) - __WARNING__("WARNING: CMOS DEFAULTS LOADED. PLEASE CHECK CMOS OPTION "cmos_default_loaded" !\n"); + __WARNING__("WARNING: CMOS DEFAULTS LOADED. PLEASE CHECK CMOS OPTION "cmos_default_loaded" !\n"); #endif
post_cache_as_ram(); diff --git a/src/mainboard/supermicro/h8qgi/BiosCallOuts.c b/src/mainboard/supermicro/h8qgi/BiosCallOuts.c old mode 100755 new mode 100644 diff --git a/src/mainboard/supermicro/h8qgi/BiosCallOuts.h b/src/mainboard/supermicro/h8qgi/BiosCallOuts.h old mode 100755 new mode 100644 diff --git a/src/mainboard/supermicro/h8qgi/OptionsIds.h b/src/mainboard/supermicro/h8qgi/OptionsIds.h old mode 100755 new mode 100644 diff --git a/src/mainboard/supermicro/h8qgi/acpi_tables.c b/src/mainboard/supermicro/h8qgi/acpi_tables.c old mode 100755 new mode 100644 diff --git a/src/mainboard/supermicro/h8qgi/agesawrapper.c b/src/mainboard/supermicro/h8qgi/agesawrapper.c old mode 100755 new mode 100644 diff --git a/src/mainboard/supermicro/h8qgi/agesawrapper.h b/src/mainboard/supermicro/h8qgi/agesawrapper.h old mode 100755 new mode 100644 diff --git a/src/mainboard/supermicro/h8qgi/buildOpts.c b/src/mainboard/supermicro/h8qgi/buildOpts.c old mode 100755 new mode 100644 diff --git a/src/mainboard/supermicro/h8qgi/chip.h b/src/mainboard/supermicro/h8qgi/chip.h old mode 100755 new mode 100644 diff --git a/src/mainboard/supermicro/h8qgi/dimmSpd.c b/src/mainboard/supermicro/h8qgi/dimmSpd.c old mode 100755 new mode 100644 diff --git a/src/mainboard/supermicro/h8qgi/fadt.c b/src/mainboard/supermicro/h8qgi/fadt.c old mode 100755 new mode 100644 diff --git a/src/mainboard/supermicro/h8qgi/get_bus_conf.c b/src/mainboard/supermicro/h8qgi/get_bus_conf.c old mode 100755 new mode 100644 diff --git a/src/mainboard/supermicro/h8qgi/irq_tables.c b/src/mainboard/supermicro/h8qgi/irq_tables.c old mode 100755 new mode 100644 diff --git a/src/mainboard/supermicro/h8qgi/mainboard.c b/src/mainboard/supermicro/h8qgi/mainboard.c old mode 100755 new mode 100644 diff --git a/src/mainboard/supermicro/h8qgi/mptable.c b/src/mainboard/supermicro/h8qgi/mptable.c old mode 100755 new mode 100644 diff --git a/src/mainboard/supermicro/h8qgi/platform_oem.c b/src/mainboard/supermicro/h8qgi/platform_oem.c old mode 100755 new mode 100644 diff --git a/src/mainboard/supermicro/h8qgi/platform_oem.h b/src/mainboard/supermicro/h8qgi/platform_oem.h old mode 100755 new mode 100644 diff --git a/src/mainboard/supermicro/h8qgi/romstage.c b/src/mainboard/supermicro/h8qgi/romstage.c old mode 100755 new mode 100644 diff --git a/src/mainboard/supermicro/h8scm_fam10/mainboard.c b/src/mainboard/supermicro/h8scm_fam10/mainboard.c old mode 100755 new mode 100644 diff --git a/src/mainboard/supermicro/h8scm_fam10/romstage.c b/src/mainboard/supermicro/h8scm_fam10/romstage.c old mode 100755 new mode 100644 diff --git a/src/mainboard/wyse/s50/romstage.c b/src/mainboard/wyse/s50/romstage.c index d80e2d5..12fc446 100644 --- a/src/mainboard/wyse/s50/romstage.c +++ b/src/mainboard/wyse/s50/romstage.c @@ -58,7 +58,7 @@ void main(unsigned long bist) SystemPreInit();
cs5536_early_setup(); - + /* cs5536_disable_internal_uart disable them. Set them up now... */ cs5536_setup_onchipuart(1);
diff --git a/src/northbridge/amd/agesa/family10/amdfam10.h b/src/northbridge/amd/agesa/family10/amdfam10.h old mode 100755 new mode 100644 diff --git a/src/northbridge/amd/agesa/family10/bootblock.c b/src/northbridge/amd/agesa/family10/bootblock.c old mode 100755 new mode 100644 diff --git a/src/northbridge/amd/agesa/family10/chip.h b/src/northbridge/amd/agesa/family10/chip.h old mode 100755 new mode 100644 diff --git a/src/northbridge/amd/agesa/family10/northbridge.c b/src/northbridge/amd/agesa/family10/northbridge.c old mode 100755 new mode 100644 diff --git a/src/northbridge/amd/agesa/family10/northbridge.h b/src/northbridge/amd/agesa/family10/northbridge.h old mode 100755 new mode 100644 diff --git a/src/northbridge/amd/agesa/family10/reset_test.h b/src/northbridge/amd/agesa/family10/reset_test.h old mode 100755 new mode 100644 diff --git a/src/northbridge/amd/agesa/family10/root_complex/chip.h b/src/northbridge/amd/agesa/family10/root_complex/chip.h old mode 100755 new mode 100644 diff --git a/src/northbridge/amd/agesa/family12/amdfam12_conf.c b/src/northbridge/amd/agesa/family12/amdfam12_conf.c old mode 100755 new mode 100644 diff --git a/src/northbridge/amd/agesa/family12/bootblock.c b/src/northbridge/amd/agesa/family12/bootblock.c old mode 100755 new mode 100644 index eead31d..f6ae8be --- a/src/northbridge/amd/agesa/family12/bootblock.c +++ b/src/northbridge/amd/agesa/family12/bootblock.c @@ -20,7 +20,7 @@ * *************************************************************************** * */ - + #include <arch/io.h> #include <arch/romcc_io.h> #include <device/pci_def.h> diff --git a/src/northbridge/amd/agesa/family12/chip.h b/src/northbridge/amd/agesa/family12/chip.h old mode 100755 new mode 100644 diff --git a/src/northbridge/amd/agesa/family12/northbridge.c b/src/northbridge/amd/agesa/family12/northbridge.c old mode 100755 new mode 100644 index 55109b5..2c039d2 --- a/src/northbridge/amd/agesa/family12/northbridge.c +++ b/src/northbridge/amd/agesa/family12/northbridge.c @@ -311,7 +311,7 @@ static struct hw_mem_hole_info get_hw_mem_hole_info(void) }
#if 0 - // We need to double check if there is speical set on base reg and limit reg + // We need to double check if there is speical set on base reg and limit reg // are not continous instead of hole, it will find out it's hole_startk if(mem_hole.node_id==-1) { resource_t limitk_pri = 0; @@ -332,7 +332,7 @@ static struct hw_mem_hole_info get_hw_mem_hole_info(void) } } #endif - + return mem_hole; } #endif @@ -471,7 +471,7 @@ static void set_resources(device_t dev) struct resource *res;
printk(BIOS_DEBUG, "\nFam12h - northbridge.c - set_resources - Start.\n"); - + /* Find the nodeid */ nodeid = amdfam12_nodeid(dev);
@@ -782,7 +782,7 @@ static void domain_enable_resources(device_t dev) /* Must be called after PCI enumeration and resource allocation */ // printk(BIOS_DEBUG, "\nFam12h - northbridge.c - domain_enable_resources - agesawrapper_amdinitmid - Start.\n"); printk(BIOS_DEBUG, "\nFam12h - northbridge.c - domain_enable_resources - Start.\n"); -// val = agesawrapper_amdinitmid (); +// val = agesawrapper_amdinitmid (); // if(val) { // printk(BIOS_DEBUG, "agesawrapper_amdinitmid failed: %x \n", val); // } @@ -819,7 +819,7 @@ static void cpu_bus_set_resources(device_t dev) pci_dev_set_resources(dev); printk(BIOS_DEBUG, "Fam12h - northbridge.c - cpu_bus_set_resources - End.\n"); } - + static void cpu_bus_init(device_t dev) { u32 val; @@ -830,20 +830,20 @@ static void cpu_bus_init(device_t dev) #if CONFIG_SOUTHBRIDGE_AMD_CIMX_SB900 /* Must be called after PCI enumeration and resource allocation */ printk(BIOS_DEBUG, "\nFam12h - northbridge.c - cpu_bus_init - sb_After_Pci_Init - Start.\n"); - sb_After_Pci_Init (); + sb_After_Pci_Init (); printk(BIOS_DEBUG, "Fam12h - northbridge.c - cpu_bus_init - sb_After_Pci_Init - End.\n"); #endif // #if CONFIG_SOUTHBRIDGE_AMD_CIMX_SB900
#if CONFIG_SOUTHBRIDGE_AMD_CIMX_SB900 /* Must be called after PCI enumeration and resource allocation */ printk(BIOS_DEBUG, "\nFam12h - northbridge.c - cpu_bus_init - sb_Mid_Post_Init - Start.\n"); - sb_Mid_Post_Init (); + sb_Mid_Post_Init (); printk(BIOS_DEBUG, "Fam12h - northbridge.c - cpu_bus_init - sb_Mid_Post_Init - End.\n"); #endif // #if CONFIG_SOUTHBRIDGE_AMD_CIMX_SB900
/* Must be called after PCI enumeration and resource allocation */ printk(BIOS_DEBUG, "\nFam12h - northbridge.c - cpu_bus_init - agesawrapper_amdinitmid - Start.\n"); - val = agesawrapper_amdinitmid (); + val = agesawrapper_amdinitmid (); if(val) { printk(BIOS_DEBUG, "agesawrapper_amdinitmid failed: %x \n", val); } diff --git a/src/northbridge/amd/agesa/family12/northbridge.h b/src/northbridge/amd/agesa/family12/northbridge.h old mode 100755 new mode 100644 diff --git a/src/northbridge/amd/agesa/family12/root_complex/chip.h b/src/northbridge/amd/agesa/family12/root_complex/chip.h old mode 100755 new mode 100644 diff --git a/src/northbridge/amd/agesa/family14/bootblock.c b/src/northbridge/amd/agesa/family14/bootblock.c index eead31d..f6ae8be 100644 --- a/src/northbridge/amd/agesa/family14/bootblock.c +++ b/src/northbridge/amd/agesa/family14/bootblock.c @@ -20,7 +20,7 @@ * *************************************************************************** * */ - + #include <arch/io.h> #include <arch/romcc_io.h> #include <device/pci_def.h> diff --git a/src/northbridge/amd/amdfam10/amdfam10.h b/src/northbridge/amd/amdfam10/amdfam10.h index b410bb9..9951806 100644 --- a/src/northbridge/amd/amdfam10/amdfam10.h +++ b/src/northbridge/amd/amdfam10/amdfam10.h @@ -958,7 +958,7 @@ that are corresponding to 0x01, 0x02, 0x03, 0x05, 0x06, 0x07 // byte 1 - fid_max // byte 2 - nb_cof_vid_update // byte 3 - apic id - + #define LAPIC_MSG_REG 0x380 #define F10_APSTATE_STARTED 0x13 // start of AP execution #define F10_APSTATE_STOPPED 0x14 // allow AP to stop diff --git a/src/northbridge/amd/amdht/AsPsDefs.h b/src/northbridge/amd/amdht/AsPsDefs.h index 566e1fb..ccee1fd 100644 --- a/src/northbridge/amd/amdht/AsPsDefs.h +++ b/src/northbridge/amd/amdht/AsPsDefs.h @@ -292,8 +292,8 @@ #define CUR_PSTATE_MSR 0xc0010063 #define TSC_FREQ_SEL_SHIFT 24
-#define TSC_FREQ_SEL_MASK (1 << TSC_FREQ_SEL_SHIFT) - +#define TSC_FREQ_SEL_MASK (1 << TSC_FREQ_SEL_SHIFT) + #define WAIT_PSTATE_TIMEOUT 80000000 /* 0.1 s , unit : 1.25 ns */
#endif diff --git a/src/northbridge/amd/amdk8/coherent_ht.c b/src/northbridge/amd/amdk8/coherent_ht.c index 8b50eed..a262686 100644 --- a/src/northbridge/amd/amdk8/coherent_ht.c +++ b/src/northbridge/amd/amdk8/coherent_ht.c @@ -673,7 +673,7 @@ static void setup_uniprocessor(void) }
#if CONFIG_MAX_PHYSICAL_CPUS > 2 -static int optimize_connection_group(const u8 *opt_conn, int num) +static int optimize_connection_group(const u8 *opt_conn, int num) { int needs_reset = 0; int i; @@ -1709,7 +1709,7 @@ static int apply_cpu_errata_fixes(unsigned nodes) } #endif
- + #if CONFIG_K8_REV_F_SUPPORT == 0 /* I can't touch this msr on early buggy cpus, and cannot apply either 169 or 131 */ if (!is_cpu_pre_b3()) diff --git a/src/northbridge/amd/amdk8/misc_control.c b/src/northbridge/amd/amdk8/misc_control.c index 4533818..7ba2b90 100644 --- a/src/northbridge/amd/amdk8/misc_control.c +++ b/src/northbridge/amd/amdk8/misc_control.c @@ -48,7 +48,7 @@ static void mcf3_read_resources(device_t dev) }
iommu = 1; - if( get_option(&iommu, "iommu") < 0 ) + if( get_option(&iommu, "iommu") < 0 ) { iommu = CONFIG_IOMMU; } diff --git a/src/northbridge/amd/amdk8/raminit_f.c b/src/northbridge/amd/amdk8/raminit_f.c index a620366..319293b 100644 --- a/src/northbridge/amd/amdk8/raminit_f.c +++ b/src/northbridge/amd/amdk8/raminit_f.c @@ -1815,7 +1815,7 @@ static struct spd_set_memclk_result spd_set_memclk(const struct mem_controller * #endif #endif ]; - + if (bios_cycle_time > min_cycle_time) { min_cycle_time = bios_cycle_time; } diff --git a/src/northbridge/amd/amdmct/amddefs.h b/src/northbridge/amd/amdmct/amddefs.h index d2bef38..ae1537f 100644 --- a/src/northbridge/amd/amdmct/amddefs.h +++ b/src/northbridge/amd/amdmct/amddefs.h @@ -140,7 +140,7 @@ #define BU_CFG2 0xC001102A
/* - * Processor package types + * Processor package types */ #define AMD_PKGTYPE_FrX_1207 0 #define AMD_PKGTYPE_AM3_2r2 1 diff --git a/src/northbridge/intel/i82830/smihandler.c b/src/northbridge/intel/i82830/smihandler.c index f7c6b5a..37b138a 100644 --- a/src/northbridge/intel/i82830/smihandler.c +++ b/src/northbridge/intel/i82830/smihandler.c @@ -196,7 +196,7 @@ static void mbi_call(u8 subf, banner_id_t *banner_id) }
mbi_header = (mbi_header_t *)&mbi[i]; - len = ALIGN((mbi_header->size * 16) + sizeof(mbi_header) + ALIGN(mbi_header->name_len, 16), 16); + len = ALIGN((mbi_header->size * 16) + sizeof(mbi_header) + ALIGN(mbi_header->name_len, 16), 16);
if (obj_header->objnum == count) { #ifdef DEBUG_SMI_I82830 diff --git a/src/northbridge/intel/i855/raminit.c b/src/northbridge/intel/i855/raminit.c index 85ba1be..23c3cb1 100644 --- a/src/northbridge/intel/i855/raminit.c +++ b/src/northbridge/intel/i855/raminit.c @@ -831,12 +831,12 @@ static void spd_set_dram_throttle_control(void) */ dtc_reg |= (3 << 28);
- /* Read Counter Based Power Throttle Control (RCTC): + /* Read Counter Based Power Throttle Control (RCTC): * 0 = 85% */ dtc_reg |= (0 << 24);
- /* Write Counter Based Power Throttle Control (WCTC): + /* Write Counter Based Power Throttle Control (WCTC): * 0 = 85% */ dtc_reg |= (0 << 20); @@ -879,7 +879,7 @@ static void spd_update(u8 reg, u32 new_value) u32 value2 = pci_read_config32(NORTHBRIDGE_MMC, reg); PRINTK_DEBUG("update reg %02x, old: %08x, new: %08x, read back: %08x\n", reg, value1, new_value, value2); #endif -} +}
/* if ram still doesn't work do this function */ static void spd_set_undocumented_registers(void) @@ -967,7 +967,7 @@ static void sdram_set_spd_registers(void) if (dimm_mask == 0) { print_debug("No usable memory for this controller\n"); } else { - PRINTK_DEBUG("DIMM MASK: %02x\n", dimm_mask); + PRINTK_DEBUG("DIMM MASK: %02x\n", dimm_mask);
spd_set_row_attributes(dimm_mask); spd_set_dram_controller_mode(dimm_mask); diff --git a/src/northbridge/via/cx700/northbridge.h b/src/northbridge/via/cx700/northbridge.h index 4ae9ce5..c651bfe 100644 --- a/src/northbridge/via/cx700/northbridge.h +++ b/src/northbridge/via/cx700/northbridge.h @@ -21,6 +21,6 @@ #define NORTHBRIDGE_VIA_CX700_H
extern unsigned int cx700_scan_root_bus(device_t root, unsigned int max); -extern void (*realmode_interrupt)(u32 intno, u32 eax, u32 ebx, u32 ecx, u32 edx, +extern void (*realmode_interrupt)(u32 intno, u32 eax, u32 ebx, u32 ecx, u32 edx, u32 esi, u32 edi) __attribute__((regparm(0))); #endif /* NORTHBRIDGE_VIA_CX700_H */ diff --git a/src/northbridge/via/vt8623/northbridge.h b/src/northbridge/via/vt8623/northbridge.h index 9c08287..176a590 100644 --- a/src/northbridge/via/vt8623/northbridge.h +++ b/src/northbridge/via/vt8623/northbridge.h @@ -2,7 +2,7 @@ #define NORTHBRIDGE_VIA_VT8623_H
unsigned int vt8623_scan_root_bus(device_t root, unsigned int max); -extern void (*realmode_interrupt)(u32 intno, u32 eax, u32 ebx, u32 ecx, u32 edx, +extern void (*realmode_interrupt)(u32 intno, u32 eax, u32 ebx, u32 ecx, u32 edx, u32 esi, u32 edi) __attribute__((regparm(0)));
#endif /* NORTHBRIDGE_VIA_VT8623_H */ diff --git a/src/northbridge/via/vx800/northbridge.h b/src/northbridge/via/vx800/northbridge.h index 05f75d2..4b51bb7 100644 --- a/src/northbridge/via/vx800/northbridge.h +++ b/src/northbridge/via/vx800/northbridge.h @@ -21,7 +21,7 @@ #define NORTHBRIDGE_VIA_VX800_H
extern unsigned int vx800_scan_root_bus(device_t root, unsigned int max); -extern void (*realmode_interrupt)(u32 intno, u32 eax, u32 ebx, u32 ecx, u32 edx, +extern void (*realmode_interrupt)(u32 intno, u32 eax, u32 ebx, u32 ecx, u32 edx, u32 esi, u32 edi) __attribute__((regparm(0)));
#endif /* NORTHBRIDGE_VIA_VX800_H */ diff --git a/src/southbridge/amd/cimx/sb800/SBPLATFORM.h b/src/southbridge/amd/cimx/sb800/SBPLATFORM.h index d7317a2..db5343d 100644 --- a/src/southbridge/amd/cimx/sb800/SBPLATFORM.h +++ b/src/southbridge/amd/cimx/sb800/SBPLATFORM.h @@ -20,7 +20,7 @@ * *************************************************************************** * */ - + #ifndef _AMD_SBPLATFORM_H_ #define _AMD_SBPLATFORM_H_
@@ -112,7 +112,7 @@ typedef union _PCI_ADDR { */ #define SB_CIMx_PARAMETER 0x02
-// Generic +// Generic #define cimSpreadSpectrumDefault TRUE #define cimSpreadSpectrumTypeDefault 0x00 // Normal #define cimHpetTimerDefault TRUE @@ -121,7 +121,7 @@ typedef union _PCI_ADDR { #define cimSpiFastReadEnableDefault 0x01 // Enable #define cimSpiFastReadSpeedDefault 0x01 // 33 MHz #define cimSioHwmPortEnableDefault FALSE -// GPP/AB Controller +// GPP/AB Controller #define cimNbSbGen2Default TRUE #define cimAlinkPhyPllPowerDownDefault TRUE #define cimResetCpuOnSyncFloodDefault TRUE @@ -129,13 +129,13 @@ typedef union _PCI_ADDR { #define cimGppMemWrImproveDefault TRUE #define cimGppPortAspmDefault FALSE #define cimGppLaneReversalDefault FALSE -#define cimGppPhyPllPowerDownDefault TRUE +#define cimGppPhyPllPowerDownDefault TRUE // USB Controller #define cimUsbPhyPowerDownDefault FALSE // GEC Controller #define cimSBGecDebugBusDefault FALSE #define cimSBGecPwrDefault 0x03 -// Sata Controller +// Sata Controller #define cimSataSetMaxGen2Default 0x00 #define cimSATARefClkSelDefault 0x10 #define cimSATARefDivSelDefault 0x80 @@ -143,11 +143,11 @@ typedef union _PCI_ADDR { #define cimSataPortMultCapDefault TRUE #define cimSataPscCapDefault 0x00 // Enable #define cimSataSscCapDefault 0x00 // Enable -#define cimSataFisBasedSwitchingDefault FALSE +#define cimSataFisBasedSwitchingDefault FALSE #define cimSataCccSupportDefault FALSE #define cimSataClkAutoOffDefault FALSE #define cimNativepciesupportDefault FALSE -// Fusion Related +// Fusion Related #define cimAcDcMsgDefault FALSE #define cimTimerTickTrackDefault FALSE #define cimClockInterruptTagDefault FALSE diff --git a/src/southbridge/amd/cimx/sb800/bootblock.c b/src/southbridge/amd/cimx/sb800/bootblock.c index 593bd6b..0a339b0 100644 --- a/src/southbridge/amd/cimx/sb800/bootblock.c +++ b/src/southbridge/amd/cimx/sb800/bootblock.c @@ -39,8 +39,8 @@ static void enable_rom(void) pci_io_write_config32(dev, 0x44, dword);
/* SB800 LPC Bridge 0:20:3:48h. - * BIT0: Port Enable for SuperIO 0x2E-0x2F - * BIT1: Port Enable for SuperIO 0x4E-0x4F + * BIT0: Port Enable for SuperIO 0x2E-0x2F + * BIT1: Port Enable for SuperIO 0x4E-0x4F * BIT4: Port Enable for LPC ROM Address Arrage2 (0x68-0x6C) * BIT6: Port Enable for RTC IO 0x70-0x73 * BIT21: Port Enable for Port 0x80 diff --git a/src/southbridge/amd/cimx/sb900/Amd.h b/src/southbridge/amd/cimx/sb900/Amd.h old mode 100755 new mode 100644 diff --git a/src/southbridge/amd/cimx/sb900/AmdSbLib.h b/src/southbridge/amd/cimx/sb900/AmdSbLib.h old mode 100755 new mode 100644 diff --git a/src/southbridge/amd/cimx/sb900/SbEarly.h b/src/southbridge/amd/cimx/sb900/SbEarly.h old mode 100755 new mode 100644 diff --git a/src/southbridge/amd/cimx/sb900/SbPlatform.h b/src/southbridge/amd/cimx/sb900/SbPlatform.h old mode 100755 new mode 100644 diff --git a/src/southbridge/amd/cimx/sb900/bootblock.c b/src/southbridge/amd/cimx/sb900/bootblock.c old mode 100755 new mode 100644 index e04cec0..e84743b --- a/src/southbridge/amd/cimx/sb900/bootblock.c +++ b/src/southbridge/amd/cimx/sb900/bootblock.c @@ -73,8 +73,8 @@ static void sb900_enable_rom(void) pci_io_write_config32(dev, 0x44, dword);
/* SB900 LPC Bridge 0:20:3:48h. - * BIT0: Port Enable for SuperIO 0x2E-0x2F - * BIT1: Port Enable for SuperIO 0x4E-0x4F + * BIT0: Port Enable for SuperIO 0x2E-0x2F + * BIT1: Port Enable for SuperIO 0x4E-0x4F * BIT4: Port Enable for LPC ROM Address Arrage2 (0x68-0x6C) * BIT6: Port Enable for RTC IO 0x70-0x73 * BIT21: Port Enable for Port 0x80 @@ -86,7 +86,7 @@ static void sb900_enable_rom(void) /* Enable 4MB rom access at 0xFFE00000 - 0xFFFFFFFF */ /* Set the 4MB enable bits */ word = pci_io_read_config16(dev, 0x6c); - word = 0xFFC0; + word = 0xFFC0; pci_io_write_config16(dev, 0x6c, word); }
diff --git a/src/southbridge/amd/cimx/sb900/cbtypes.h b/src/southbridge/amd/cimx/sb900/cbtypes.h old mode 100755 new mode 100644 diff --git a/src/southbridge/amd/cimx/sb900/chip.h b/src/southbridge/amd/cimx/sb900/chip.h old mode 100755 new mode 100644 diff --git a/src/southbridge/amd/cimx/sb900/chip_name.c b/src/southbridge/amd/cimx/sb900/chip_name.c old mode 100755 new mode 100644 diff --git a/src/southbridge/amd/cimx/sb900/early.c b/src/southbridge/amd/cimx/sb900/early.c old mode 100755 new mode 100644 index bd4fd4f..1176ca5 --- a/src/southbridge/amd/cimx/sb900/early.c +++ b/src/southbridge/amd/cimx/sb900/early.c @@ -142,7 +142,7 @@ void sb_Late_Post(void) //AMD_IMAGE_HEADER was missing, when using AmdSbDispatcher, // VerifyImage() will fail, LocateImage() take minitues to find the image. sbLatePost(&sb_early_cfg); - + //Set ACPI SCI IRQ to 0x9. data = CONFIG_ACPI_SCI_IRQ; outb(0x10, 0xC00); diff --git a/src/southbridge/amd/cimx/sb900/late.c b/src/southbridge/amd/cimx/sb900/late.c old mode 100755 new mode 100644 diff --git a/src/southbridge/amd/cimx/sb900/lpc.c b/src/southbridge/amd/cimx/sb900/lpc.c old mode 100755 new mode 100644 diff --git a/src/southbridge/amd/cimx/sb900/lpc.h b/src/southbridge/amd/cimx/sb900/lpc.h old mode 100755 new mode 100644 diff --git a/src/southbridge/amd/cimx/sb900/smbus.c b/src/southbridge/amd/cimx/sb900/smbus.c old mode 100755 new mode 100644 diff --git a/src/southbridge/amd/cimx/sb900/smbus.h b/src/southbridge/amd/cimx/sb900/smbus.h old mode 100755 new mode 100644 diff --git a/src/southbridge/amd/rs690/ht.c b/src/southbridge/amd/rs690/ht.c index dba28e7..5d816e5 100644 --- a/src/southbridge/amd/rs690/ht.c +++ b/src/southbridge/amd/rs690/ht.c @@ -28,25 +28,25 @@ static void ht_dev_set_resources(device_t dev) { #if CONFIG_EXT_CONF_SUPPORT == 1 - unsigned reg; + unsigned reg; device_t k8_f1; resource_t rbase, rend; u32 base, limit; struct resource *resource; - + printk(BIOS_DEBUG,"%s %s\n", dev_path(dev), __func__); - + resource = probe_resource(dev, 0x1C); if (resource) { - set_nbmisc_enable_bits(dev, 0x0, 1 << 3, 0 << 3); // make bar3 visible + set_nbmisc_enable_bits(dev, 0x0, 1 << 3, 0 << 3); // make bar3 visible set_nbcfg_enable_bits(dev, 0x7C, 1 << 30, 1 << 30); /* Enables writes to the BAR3 register. */ - set_nbcfg_enable_bits(dev, 0x84, 7 << 16, 0 << 16); // program bus range: 255 busses + set_nbcfg_enable_bits(dev, 0x84, 7 << 16, 0 << 16); // program bus range: 255 busses pci_write_config32(dev, 0x1C, resource->base); /* Enable MMCONFIG decoding. */ set_htiu_enable_bits(dev, 0x32, 1 << 28, 1 << 28); /* PCIEMiscInit */ set_nbcfg_enable_bits(dev, 0x7C, 1 << 30, 0 << 30); /* Disable writes to the BAR3 register. */ set_nbmisc_enable_bits(dev, 0x0, 1 << 3, 1 << 3); // hide bar 3 - + // setup resource nonposted in k8 mmio /* Get the base address */ rbase = resource->base; @@ -74,9 +74,9 @@ static void ht_dev_set_resources(device_t dev) limit &= 0x00000048; limit |= ((rend >> 8) & 0xffffff00); limit |= (sblk << 4); - limit |= (1 << 7); + limit |= (1 << 7); printk(BIOS_INFO, "%s <- index %x base %04x limit %04x\n", dev_path(k8_f1), reg, base, limit); - pci_write_config32(k8_f1, reg+4, limit); + pci_write_config32(k8_f1, reg+4, limit); pci_write_config32(k8_f1, reg, base); } } @@ -88,13 +88,13 @@ static void ht_dev_read_resources(device_t dev) { #if CONFIG_EXT_CONF_SUPPORT == 1 struct resource *res; - - printk(BIOS_DEBUG,"%s %s\n", dev_path(dev), __func__); - set_nbmisc_enable_bits(dev, 0x0, 1 << 3, 1 << 3); // hide bar 3 + + printk(BIOS_DEBUG,"%s %s\n", dev_path(dev), __func__); + set_nbmisc_enable_bits(dev, 0x0, 1 << 3, 1 << 3); // hide bar 3 #endif
pci_dev_read_resources(dev); - + #if CONFIG_EXT_CONF_SUPPORT == 1 /* Add an MMCONFIG resource. */ res = new_resource(dev, 0x1C); @@ -104,9 +104,9 @@ static void ht_dev_read_resources(device_t dev) res->gran = log2(res->size); res->limit = 0xffffffffffffffffULL; /* 64bit */ res->flags = IORESOURCE_FIXED | IORESOURCE_MEM | IORESOURCE_PCI64 | IORESOURCE_ASSIGNED; - + compact_resources(dev); -#endif +#endif }
/* for UMA internal graphics */ diff --git a/src/southbridge/amd/rs780/cmn.c b/src/southbridge/amd/rs780/cmn.c index 4bd870b..40a7262 100644 --- a/src/southbridge/amd/rs780/cmn.c +++ b/src/southbridge/amd/rs780/cmn.c @@ -381,7 +381,7 @@ u32 extractbits(u32 source, int lsb, int msb) int cpuidFamily(void) { u32 baseFamily, extendedFamily, fms; - + fms = cpuid_eax (1); baseFamily = extractbits (fms, 8, 11); extendedFamily = extractbits (fms, 20, 27); diff --git a/src/southbridge/amd/rs780/gfx.c b/src/southbridge/amd/rs780/gfx.c index 3c06d44..65a5e2b 100644 --- a/src/southbridge/amd/rs780/gfx.c +++ b/src/southbridge/amd/rs780/gfx.c @@ -511,7 +511,7 @@ static void internal_gfx_pci_dev_init(struct device *dev) vgainfo.ucUMAChannelNumber = 2; } } - + // processor type if (is_family0Fh()) vgainfo.ulCPUCapInfo = 3; @@ -539,9 +539,9 @@ static void internal_gfx_pci_dev_init(struct device *dev)
/* HT width. */ value = pci_read_config8(nb_dev, 0xcb); - vgainfo.usMinDownStreamHTLinkWidth = - vgainfo.usMaxDownStreamHTLinkWidth = - vgainfo.usMinUpStreamHTLinkWidth = + vgainfo.usMinDownStreamHTLinkWidth = + vgainfo.usMaxDownStreamHTLinkWidth = + vgainfo.usMinUpStreamHTLinkWidth = vgainfo.usMaxUpStreamHTLinkWidth = vgainfo.usMinHTLinkWidth = vgainfo.usMaxHTLinkWidth = ht_width_lookup [extractbits(value, 0, 2)]; diff --git a/src/southbridge/amd/rs780/rs780.c b/src/southbridge/amd/rs780/rs780.c index cf6d2df..717aeab 100644 --- a/src/southbridge/amd/rs780/rs780.c +++ b/src/southbridge/amd/rs780/rs780.c @@ -223,7 +223,7 @@ static void rs780_nb_gfx_dev_table(device_t nb_dev, device_t dev) #if (CONFIG_GFXUMA == 1) extern uint64_t uma_memory_size; // bits 7-9: aperture size - // 0-7: 128mb, 256mb, 64mb, 32mb, 512mb, 1g, 2g, 4g + // 0-7: 128mb, 256mb, 64mb, 32mb, 512mb, 1g, 2g, 4g if (uma_memory_size == 0x02000000) romstrap2 |= 3 << 7; if (uma_memory_size == 0x04000000) romstrap2 |= 2 << 7; if (uma_memory_size == 0x08000000) romstrap2 |= 0 << 7; diff --git a/src/southbridge/amd/sb600/sata.c b/src/southbridge/amd/sb600/sata.c index 7eda2e8..121e3d7 100644 --- a/src/southbridge/amd/sb600/sata.c +++ b/src/southbridge/amd/sb600/sata.c @@ -123,8 +123,8 @@ static void sata_init(struct device *dev) // no cmos option i = CONFIG_SATA_MODE; } - printk(BIOS_INFO, "%s: setting sata mode = %s\n", __func__, (i == SATA_MODE_IDE)?"ide":"ahci" ); - + printk(BIOS_INFO, "%s: setting sata mode = %s\n", __func__, (i == SATA_MODE_IDE)?"ide":"ahci" ); + dword = pci_read_config32(dev, 0x8); dword &= 0xff0000ff; if (i == SATA_MODE_IDE) diff --git a/src/southbridge/amd/sb700/early_setup.c b/src/southbridge/amd/sb700/early_setup.c old mode 100755 new mode 100644 diff --git a/src/southbridge/amd/sb700/ide.c b/src/southbridge/amd/sb700/ide.c index 4652ca2..5f415fb 100644 --- a/src/southbridge/amd/sb700/ide.c +++ b/src/southbridge/amd/sb700/ide.c @@ -51,8 +51,8 @@ static void ide_init(struct device *dev)
/* set ide as primary, if you want to boot from IDE, you'd better set it * in $vendor/$mainboard/devicetree.cb */ - - + + if (conf->boot_switch_sata_ide == 1) { struct device *sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); byte = pci_read_config8(sm_dev, 0xAD); diff --git a/src/southbridge/amd/sb700/pmio.c b/src/southbridge/amd/sb700/pmio.c old mode 100755 new mode 100644 diff --git a/src/southbridge/amd/sb700/pmio.h b/src/southbridge/amd/sb700/pmio.h old mode 100755 new mode 100644 diff --git a/src/southbridge/amd/sb700/reset.c b/src/southbridge/amd/sb700/reset.c old mode 100755 new mode 100644 diff --git a/src/southbridge/amd/sb700/sata.c b/src/southbridge/amd/sb700/sata.c old mode 100755 new mode 100644 diff --git a/src/southbridge/amd/sb700/sb700.h b/src/southbridge/amd/sb700/sb700.h old mode 100755 new mode 100644 diff --git a/src/southbridge/amd/sb700/sm.c b/src/southbridge/amd/sb700/sm.c old mode 100755 new mode 100644 diff --git a/src/southbridge/amd/sb700/smbus.c b/src/southbridge/amd/sb700/smbus.c old mode 100755 new mode 100644 diff --git a/src/southbridge/amd/sb700/smbus.h b/src/southbridge/amd/sb700/smbus.h old mode 100755 new mode 100644 diff --git a/src/southbridge/amd/sb700/usb.c b/src/southbridge/amd/sb700/usb.c old mode 100755 new mode 100644 diff --git a/src/southbridge/amd/sr5650/cmn.h b/src/southbridge/amd/sr5650/cmn.h old mode 100755 new mode 100644 diff --git a/src/southbridge/amd/sr5650/early_setup.c b/src/southbridge/amd/sr5650/early_setup.c old mode 100755 new mode 100644 diff --git a/src/southbridge/amd/sr5650/pcie.c b/src/southbridge/amd/sr5650/pcie.c old mode 100755 new mode 100644 diff --git a/src/southbridge/amd/sr5650/sr5650.c b/src/southbridge/amd/sr5650/sr5650.c old mode 100755 new mode 100644 diff --git a/src/southbridge/amd/sr5650/sr5650.h b/src/southbridge/amd/sr5650/sr5650.h old mode 100755 new mode 100644 diff --git a/src/southbridge/ti/pcixx12/chip.h b/src/southbridge/ti/pcixx12/chip.h index 6861249..42dc79c 100644 --- a/src/southbridge/ti/pcixx12/chip.h +++ b/src/southbridge/ti/pcixx12/chip.h @@ -24,7 +24,7 @@ extern struct chip_operations southbridge_ti_pcixx12_ops;
struct southbridge_ti_pcixx12_config { int dummy; - + };
#endif /* _SOUTHBRIDGE_TI_PCIXX12 */ diff --git a/src/southbridge/via/k8t890/bridge.c b/src/southbridge/via/k8t890/bridge.c index 701b93d..1b21b32 100644 --- a/src/southbridge/via/k8t890/bridge.c +++ b/src/southbridge/via/k8t890/bridge.c @@ -27,7 +27,7 @@ static void bridge_enable(struct device *dev) { u8 tmp; print_debug("B188 device dump\n"); - + /* VIA recommends this, sorry no known info. */
writeback(dev, 0x40, 0x91); diff --git a/src/southbridge/via/k8t890/ctrl.c b/src/southbridge/via/k8t890/ctrl.c index a2a5fe9..42676b1 100644 --- a/src/southbridge/via/k8t890/ctrl.c +++ b/src/southbridge/via/k8t890/ctrl.c @@ -34,7 +34,7 @@ static void vt8237r_cfg(struct device *dev, struct device *devsb) u8 regm, regm3;
device_t devfun3; - + devfun3 = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_K8T800_DRAM, 0);
@@ -45,7 +45,7 @@ static void vt8237r_cfg(struct device *dev, struct device *devsb) if (!devfun3) devfun3 = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_K8T890CE_3, 0); - + if (!devfun3) devfun3 = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_K8T890CF_3, 0); @@ -53,12 +53,12 @@ static void vt8237r_cfg(struct device *dev, struct device *devsb) if (!devfun3) devfun3 = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_K8M890CE_3, 0); - + if(!devfun3) die("\n vt8237r_cfg: Unable to find K8x8xx bridge via PCI scan. Stopping.\n");
pci_write_config8(dev, 0x70, 0xc2); - + /* PCI Control */ pci_write_config8(dev, 0x72, 0xee); pci_write_config8(dev, 0x73, 0x01); @@ -157,7 +157,7 @@ static void vt8237r_vlink_init(struct device *dev) pci_write_config8(dev, 0x48, 0xa3); }
-static void ctrl_init(struct device *dev) +static void ctrl_init(struct device *dev) {
print_debug("K8x8xx: Initializing V-Link to VT8237R sb: "); diff --git a/src/southbridge/via/k8t890/dram.c b/src/southbridge/via/k8t890/dram.c index dd65b50..9b43a5e 100644 --- a/src/southbridge/via/k8t890/dram.c +++ b/src/southbridge/via/k8t890/dram.c @@ -65,7 +65,7 @@ static void dram_enable(struct device *dev)
/* The Address Next to the Last Valid DRAM Address */ pci_write_config16(dev, 0x88, (msr.lo >> 24) | reg); - + print_debug(" VIA_X_3 device dump:\n"); dump_south(dev);
diff --git a/src/southbridge/via/k8t890/error.c b/src/southbridge/via/k8t890/error.c index a5f86bf..f2cab10 100644 --- a/src/southbridge/via/k8t890/error.c +++ b/src/southbridge/via/k8t890/error.c @@ -36,7 +36,7 @@ static void error_enable(struct device *dev)
print_debug("Done\n"); /* TODO: enable AGP errors reporting on K8M890 */ - + print_debug(" VIA_X_1 device dump:\n"); dump_south(dev); } diff --git a/src/southbridge/via/k8t890/k8x8xx.h b/src/southbridge/via/k8t890/k8x8xx.h index 7f30f3b..a0fb57a 100644 --- a/src/southbridge/via/k8t890/k8x8xx.h +++ b/src/southbridge/via/k8t890/k8x8xx.h @@ -1,6 +1,6 @@ /* * This file is part of the coreboot project. - * + * * Copyright (C) 2011 Alexandru Gagniuc mr.nuke.me@gmail.com * * This program is free software: you can redistribute it and/or modify @@ -12,7 +12,7 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * + * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA diff --git a/src/southbridge/via/vt8237r/lpc.c b/src/southbridge/via/vt8237r/lpc.c index 3e2f215..e599517 100644 --- a/src/southbridge/via/vt8237r/lpc.c +++ b/src/southbridge/via/vt8237r/lpc.c @@ -297,7 +297,7 @@ static void vt8237r_init(struct device *dev) */ pci_write_config8(dev, 0x48, 0x0c); #else - + #if CONFIG_SOUTHBRIDGE_VIA_K8T800 /* It seems that when we pair with the K8T800, we need to disable * the A2 mask @@ -310,7 +310,7 @@ static void vt8237r_init(struct device *dev) */ pci_write_config8(dev, 0x48, 0x8c); #endif - + #endif
southbridge_init_common(dev); @@ -327,7 +327,7 @@ static void vt8237r_init(struct device *dev)
printk(BIOS_SPEW, "Leaving %s.\n", __func__); printk(BIOS_SPEW, "And taking a dump:\n"); - dump_south(dev); + dump_south(dev); }
static void vt8237a_init(struct device *dev) diff --git a/src/superio/fintek/f71805f/chip.h b/src/superio/fintek/f71805f/chip.h index 6e9c6c9..60eb684 100644 --- a/src/superio/fintek/f71805f/chip.h +++ b/src/superio/fintek/f71805f/chip.h @@ -29,7 +29,7 @@ extern struct chip_operations superio_fintek_f71805f_ops;
struct superio_fintek_f71805f_config { - + };
#endif diff --git a/src/superio/fintek/f71859/chip.h b/src/superio/fintek/f71859/chip.h old mode 100755 new mode 100644 index 8400862..157ed26 --- a/src/superio/fintek/f71859/chip.h +++ b/src/superio/fintek/f71859/chip.h @@ -27,7 +27,7 @@ extern struct chip_operations superio_fintek_f71859_ops;
struct superio_fintek_f71859_config { - + };
#endif diff --git a/src/superio/fintek/f71859/early_serial.c b/src/superio/fintek/f71859/early_serial.c old mode 100755 new mode 100644 diff --git a/src/superio/fintek/f71859/f71859.h b/src/superio/fintek/f71859/f71859.h old mode 100755 new mode 100644 diff --git a/src/superio/fintek/f71859/superio.c b/src/superio/fintek/f71859/superio.c old mode 100755 new mode 100644 diff --git a/src/superio/fintek/f71863fg/chip.h b/src/superio/fintek/f71863fg/chip.h index ce9fd48..ade7498 100644 --- a/src/superio/fintek/f71863fg/chip.h +++ b/src/superio/fintek/f71863fg/chip.h @@ -28,7 +28,7 @@ extern struct chip_operations superio_fintek_f71863fg_ops;
struct superio_fintek_f71863fg_config { - + struct pc_keyboard keyboard; };
diff --git a/src/superio/fintek/f71872/chip.h b/src/superio/fintek/f71872/chip.h index 58ee421..bd41dd6 100644 --- a/src/superio/fintek/f71872/chip.h +++ b/src/superio/fintek/f71872/chip.h @@ -27,7 +27,7 @@ extern struct chip_operations superio_fintek_f71872_ops;
struct superio_fintek_f71872_config { - + struct pc_keyboard keyboard; };
diff --git a/src/superio/fintek/f71889/chip.h b/src/superio/fintek/f71889/chip.h index c775216..65ae870 100644 --- a/src/superio/fintek/f71889/chip.h +++ b/src/superio/fintek/f71889/chip.h @@ -28,7 +28,7 @@ extern struct chip_operations superio_fintek_f71889_ops;
struct superio_fintek_f71889_config { - + struct pc_keyboard keyboard; };
diff --git a/src/superio/fintek/f81865f/chip.h b/src/superio/fintek/f81865f/chip.h index 6ff3001..711e2d0 100644 --- a/src/superio/fintek/f81865f/chip.h +++ b/src/superio/fintek/f81865f/chip.h @@ -29,7 +29,7 @@ extern struct chip_operations superio_fintek_f81865f_ops;
struct superio_fintek_f81865f_config { - + struct pc_keyboard keyboard; };
diff --git a/src/superio/ite/it8661f/chip.h b/src/superio/ite/it8661f/chip.h index 744316e..64b2cf8 100644 --- a/src/superio/ite/it8661f/chip.h +++ b/src/superio/ite/it8661f/chip.h @@ -29,7 +29,7 @@ extern struct chip_operations superio_ite_it8661f_ops;
struct superio_ite_it8661f_config { - + };
#endif diff --git a/src/superio/ite/it8671f/chip.h b/src/superio/ite/it8671f/chip.h index 3dd2d81..7fa7e26 100644 --- a/src/superio/ite/it8671f/chip.h +++ b/src/superio/ite/it8671f/chip.h @@ -28,7 +28,7 @@ extern struct chip_operations superio_ite_it8671f_ops;
struct superio_ite_it8671f_config { - + struct pc_keyboard keyboard; };
diff --git a/src/superio/ite/it8673f/chip.h b/src/superio/ite/it8673f/chip.h index 431098e..126180a 100644 --- a/src/superio/ite/it8673f/chip.h +++ b/src/superio/ite/it8673f/chip.h @@ -28,7 +28,7 @@ extern struct chip_operations superio_ite_it8673f_ops;
struct superio_ite_it8673f_config { - + struct pc_keyboard keyboard; };
diff --git a/src/superio/ite/it8705f/chip.h b/src/superio/ite/it8705f/chip.h index be4a8d7..df620a8 100644 --- a/src/superio/ite/it8705f/chip.h +++ b/src/superio/ite/it8705f/chip.h @@ -29,7 +29,7 @@ extern struct chip_operations superio_ite_it8705f_ops;
struct superio_ite_it8705f_config { - + };
#endif diff --git a/src/superio/ite/it8712f/chip.h b/src/superio/ite/it8712f/chip.h index 7640109..1863006 100644 --- a/src/superio/ite/it8712f/chip.h +++ b/src/superio/ite/it8712f/chip.h @@ -28,7 +28,7 @@ extern struct chip_operations superio_ite_it8712f_ops;
struct superio_ite_it8712f_config { - + struct pc_keyboard keyboard; };
diff --git a/src/superio/ite/it8716f/chip.h b/src/superio/ite/it8716f/chip.h index 0c2f387..16b69ce 100644 --- a/src/superio/ite/it8716f/chip.h +++ b/src/superio/ite/it8716f/chip.h @@ -28,7 +28,7 @@ extern struct chip_operations superio_ite_it8716f_ops;
struct superio_ite_it8716f_config { - + struct pc_keyboard keyboard; };
diff --git a/src/superio/ite/it8718f/chip.h b/src/superio/ite/it8718f/chip.h index 78044aa..43f7152 100644 --- a/src/superio/ite/it8718f/chip.h +++ b/src/superio/ite/it8718f/chip.h @@ -28,7 +28,7 @@ extern struct chip_operations superio_ite_it8718f_ops;
struct superio_ite_it8718f_config { - + struct pc_keyboard keyboard; };
diff --git a/src/superio/nsc/pc8374/chip.h b/src/superio/nsc/pc8374/chip.h index ec0a57a..4ae78f8 100644 --- a/src/superio/nsc/pc8374/chip.h +++ b/src/superio/nsc/pc8374/chip.h @@ -29,7 +29,7 @@ extern struct chip_operations superio_nsc_pc8374_ops; #include <uart8250.h>
struct superio_nsc_pc8374_config { - + struct pc_keyboard keyboard; };
diff --git a/src/superio/nsc/pc87309/chip.h b/src/superio/nsc/pc87309/chip.h index 8a61224..b9f5a7a 100644 --- a/src/superio/nsc/pc87309/chip.h +++ b/src/superio/nsc/pc87309/chip.h @@ -27,7 +27,7 @@ extern struct chip_operations superio_nsc_pc87309_ops;
struct superio_nsc_pc87309_config { - + struct pc_keyboard keyboard; };
diff --git a/src/superio/nsc/pc87351/chip.h b/src/superio/nsc/pc87351/chip.h index cb835c7..46b56af 100644 --- a/src/superio/nsc/pc87351/chip.h +++ b/src/superio/nsc/pc87351/chip.h @@ -29,7 +29,7 @@ extern struct chip_operations superio_nsc_pc87351_ops; #include <uart8250.h>
struct superio_nsc_pc87351_config { - + struct pc_keyboard keyboard; };
diff --git a/src/superio/nsc/pc87360/chip.h b/src/superio/nsc/pc87360/chip.h index 712176d..0cc6a89 100644 --- a/src/superio/nsc/pc87360/chip.h +++ b/src/superio/nsc/pc87360/chip.h @@ -29,7 +29,7 @@ extern struct chip_operations superio_nsc_pc87360_ops; #include <uart8250.h>
struct superio_nsc_pc87360_config { - + struct pc_keyboard keyboard; };
diff --git a/src/superio/nsc/pc87366/chip.h b/src/superio/nsc/pc87366/chip.h index 75ce691..6f656d4 100644 --- a/src/superio/nsc/pc87366/chip.h +++ b/src/superio/nsc/pc87366/chip.h @@ -28,7 +28,7 @@ extern struct chip_operations superio_nsc_pc87366_ops; #include <uart8250.h>
struct superio_nsc_pc87366_config { - + struct pc_keyboard keyboard; };
diff --git a/src/superio/nsc/pc87382/chip.h b/src/superio/nsc/pc87382/chip.h index 18d570a..8cc049f 100644 --- a/src/superio/nsc/pc87382/chip.h +++ b/src/superio/nsc/pc87382/chip.h @@ -25,7 +25,7 @@ extern struct chip_operations superio_nsc_pc87382_ops;
struct superio_nsc_pc87382_config { - + };
#endif diff --git a/src/superio/nsc/pc87384/chip.h b/src/superio/nsc/pc87384/chip.h index d006478..ef202fc 100644 --- a/src/superio/nsc/pc87384/chip.h +++ b/src/superio/nsc/pc87384/chip.h @@ -25,7 +25,7 @@ extern struct chip_operations superio_nsc_pc87384_ops;
struct superio_nsc_pc87384_config { - + };
#endif diff --git a/src/superio/nsc/pc87392/chip.h b/src/superio/nsc/pc87392/chip.h index 1241cb2..8b5fc52 100644 --- a/src/superio/nsc/pc87392/chip.h +++ b/src/superio/nsc/pc87392/chip.h @@ -26,7 +26,7 @@ extern struct chip_operations superio_nsc_pc87392_ops; #include <uart8250.h>
struct superio_nsc_pc87392_config { - + };
#endif diff --git a/src/superio/nsc/pc87417/chip.h b/src/superio/nsc/pc87417/chip.h index a66bb40..ec3c381 100644 --- a/src/superio/nsc/pc87417/chip.h +++ b/src/superio/nsc/pc87417/chip.h @@ -29,7 +29,7 @@ extern struct chip_operations superio_nsc_pc87417_ops; #include <uart8250.h>
struct superio_nsc_pc87417_config { - + struct pc_keyboard keyboard; };
diff --git a/src/superio/nsc/pc87427/chip.h b/src/superio/nsc/pc87427/chip.h index d044fe0..610dbdf 100644 --- a/src/superio/nsc/pc87427/chip.h +++ b/src/superio/nsc/pc87427/chip.h @@ -28,7 +28,7 @@ extern struct chip_operations superio_nsc_pc87427_ops; #include <uart8250.h>
struct superio_nsc_pc87427_config { - + struct pc_keyboard keyboard; };
diff --git a/src/superio/nsc/pc97307/chip.h b/src/superio/nsc/pc97307/chip.h index 838d36b..cc43323 100644 --- a/src/superio/nsc/pc97307/chip.h +++ b/src/superio/nsc/pc97307/chip.h @@ -34,7 +34,7 @@ extern struct chip_operations superio_nsc_pc97307_ops; #include <uart8250.h>
struct superio_nsc_pc97307_config { - + struct pc_keyboard keyboard; }; #endif diff --git a/src/superio/nsc/pc97317/chip.h b/src/superio/nsc/pc97317/chip.h index 6c415f6..4eb0c19 100644 --- a/src/superio/nsc/pc97317/chip.h +++ b/src/superio/nsc/pc97317/chip.h @@ -34,7 +34,7 @@ extern struct chip_operations superio_nsc_pc97317_ops; #include <uart8250.h>
struct superio_nsc_pc97317_config { - + struct pc_keyboard keyboard; };
diff --git a/src/superio/nuvoton/wpcm450/chip.h b/src/superio/nuvoton/wpcm450/chip.h index 2afc2de..c921120 100644 --- a/src/superio/nuvoton/wpcm450/chip.h +++ b/src/superio/nuvoton/wpcm450/chip.h @@ -28,7 +28,7 @@ extern struct chip_operations superio_nuvoton_wpcm450_ops; #include <uart8250.h>
struct superio_nuvoton_wpcm450_config { - + struct pc_keyboard keyboard; };
diff --git a/src/superio/nuvoton/wpcm450/early_init.c b/src/superio/nuvoton/wpcm450/early_init.c old mode 100755 new mode 100644 diff --git a/src/superio/nuvoton/wpcm450/wpcm450.h b/src/superio/nuvoton/wpcm450/wpcm450.h old mode 100755 new mode 100644 diff --git a/src/superio/smsc/fdc37m60x/chip.h b/src/superio/smsc/fdc37m60x/chip.h index 2a1186f..450ef75 100644 --- a/src/superio/smsc/fdc37m60x/chip.h +++ b/src/superio/smsc/fdc37m60x/chip.h @@ -28,7 +28,7 @@ extern struct chip_operations superio_smsc_fdc37m60x_ops;
struct superio_smsc_fdc37m60x_config { - + struct pc_keyboard keyboard; };
diff --git a/src/superio/smsc/fdc37n972/chip.h b/src/superio/smsc/fdc37n972/chip.h index abaf765..858cf53 100644 --- a/src/superio/smsc/fdc37n972/chip.h +++ b/src/superio/smsc/fdc37n972/chip.h @@ -27,7 +27,7 @@ extern struct chip_operations superio_smsc_fdc37n972_ops;
struct superio_smsc_fdc37n972_config { - + struct pc_keyboard keyboard; };
diff --git a/src/superio/smsc/kbc1100/chip.h b/src/superio/smsc/kbc1100/chip.h index 020224f..40aff0b 100644 --- a/src/superio/smsc/kbc1100/chip.h +++ b/src/superio/smsc/kbc1100/chip.h @@ -27,7 +27,7 @@ struct chip_operations; extern struct chip_operations superio_smsc_kbc1100_ops;
struct superio_smsc_kbc1100_config { - + struct pc_keyboard keyboard; };
diff --git a/src/superio/smsc/kbc1100/kbc1100_early_init.c b/src/superio/smsc/kbc1100/kbc1100_early_init.c index 4247a96..84aa4e0 100644 --- a/src/superio/smsc/kbc1100/kbc1100_early_init.c +++ b/src/superio/smsc/kbc1100/kbc1100_early_init.c @@ -40,11 +40,11 @@ static inline void kbc1100_early_init(unsigned port) dev = PNP_DEV (port, KBC1100_KBC);
pnp_enter_conf_state(dev); - + /* Serial IRQ enabled */ outb(0x25, port); outb(0x04, port + 1); - + /* Enable SMSC UART 0 */ dev = PNP_DEV (port, SMSCSUPERIO_SP1); pnp_set_logical_device(dev); @@ -70,6 +70,6 @@ static inline void kbc1100_early_init(unsigned port) pnp_exit_conf_state(dev);
/* disable the 1s timer */ - outb(0xE7, 0x64); + outb(0xE7, 0x64); }
diff --git a/src/superio/smsc/kbc1100/superio.c b/src/superio/smsc/kbc1100/superio.c index bd330ba..c4fde95 100644 --- a/src/superio/smsc/kbc1100/superio.c +++ b/src/superio/smsc/kbc1100/superio.c @@ -97,14 +97,14 @@ static void kbc1100_init(device_t dev) struct superio_smsc_kbc1100_config *conf = dev->chip_info; struct resource *res0, *res1;
- - + + if (!dev->enabled) { return; }
switch(dev->path.pnp.device) { - + case KBC1100_KBC: res0 = find_resource(dev, PNP_IDX_IO0); res1 = find_resource(dev, PNP_IDX_IO1); diff --git a/src/superio/smsc/lpc47b272/chip.h b/src/superio/smsc/lpc47b272/chip.h index 031cd20..754d63d 100644 --- a/src/superio/smsc/lpc47b272/chip.h +++ b/src/superio/smsc/lpc47b272/chip.h @@ -28,7 +28,7 @@ extern struct chip_operations superio_smsc_lpc47b272_ops; #include <uart8250.h>
struct superio_smsc_lpc47b272_config { - + struct pc_keyboard keyboard; };
diff --git a/src/superio/smsc/lpc47b397/chip.h b/src/superio/smsc/lpc47b397/chip.h index 3f3c719..48fc6e4 100644 --- a/src/superio/smsc/lpc47b397/chip.h +++ b/src/superio/smsc/lpc47b397/chip.h @@ -30,7 +30,7 @@ extern struct chip_operations superio_smsc_lpc47b397_ops; #include <uart8250.h>
struct superio_smsc_lpc47b397_config { - + struct pc_keyboard keyboard; };
diff --git a/src/superio/smsc/lpc47m10x/chip.h b/src/superio/smsc/lpc47m10x/chip.h index 79b72da..6d6ee97 100644 --- a/src/superio/smsc/lpc47m10x/chip.h +++ b/src/superio/smsc/lpc47m10x/chip.h @@ -32,7 +32,7 @@ extern struct chip_operations superio_smsc_lpc47m10x_ops; #include <uart8250.h>
struct superio_smsc_lpc47m10x_config { - + struct pc_keyboard keyboard; };
diff --git a/src/superio/smsc/lpc47m15x/chip.h b/src/superio/smsc/lpc47m15x/chip.h index 27031f2..57aba06 100644 --- a/src/superio/smsc/lpc47m15x/chip.h +++ b/src/superio/smsc/lpc47m15x/chip.h @@ -27,7 +27,7 @@ extern struct chip_operations superio_smsc_lpc47m15x_ops; #include <uart8250.h>
struct superio_smsc_lpc47m15x_config { - + struct pc_keyboard keyboard; };
diff --git a/src/superio/smsc/lpc47n217/chip.h b/src/superio/smsc/lpc47n217/chip.h index c29031a..89a778c 100644 --- a/src/superio/smsc/lpc47n217/chip.h +++ b/src/superio/smsc/lpc47n217/chip.h @@ -27,7 +27,7 @@ extern struct chip_operations superio_smsc_lpc47n217_ops; #include <uart8250.h>
struct superio_smsc_lpc47n217_config { - + };
#endif diff --git a/src/superio/smsc/lpc47n227/chip.h b/src/superio/smsc/lpc47n227/chip.h index fa02699..8b3a2c9 100644 --- a/src/superio/smsc/lpc47n227/chip.h +++ b/src/superio/smsc/lpc47n227/chip.h @@ -27,7 +27,7 @@ extern struct chip_operations superio_smsc_lpc47n227_ops;
struct superio_smsc_lpc47n227_config { - + struct pc_keyboard keyboard; };
diff --git a/src/superio/smsc/lpc47n227/superio.c b/src/superio/smsc/lpc47n227/superio.c index c7ffd69..a241eb6 100644 --- a/src/superio/smsc/lpc47n227/superio.c +++ b/src/superio/smsc/lpc47n227/superio.c @@ -85,7 +85,7 @@ static void enable_dev(device_t dev) * * NOTE: Cannot use pnp_set_resources() here because it assumes chip * support for logical devices, which the LPC47N227 doesn't have. - * + * * @param dev Pointer to structure describing a Super I/O device. */ void lpc47n227_pnp_set_resources(device_t dev) diff --git a/src/superio/smsc/sio10n268/chip.h b/src/superio/smsc/sio10n268/chip.h index 32703bb..cd6e87b 100644 --- a/src/superio/smsc/sio10n268/chip.h +++ b/src/superio/smsc/sio10n268/chip.h @@ -27,7 +27,7 @@ extern struct chip_operations superio_smsc_sio10n268_ops;
struct superio_smsc_sio10n268_config { - + struct pc_keyboard keyboard; };
diff --git a/src/superio/smsc/smscsuperio/chip.h b/src/superio/smsc/smscsuperio/chip.h index ffe4b21..86f93be 100644 --- a/src/superio/smsc/smscsuperio/chip.h +++ b/src/superio/smsc/smscsuperio/chip.h @@ -28,7 +28,7 @@ extern struct chip_operations superio_smsc_smscsuperio_ops;
struct superio_smsc_smscsuperio_config { - + struct pc_keyboard keyboard; };
diff --git a/src/superio/via/vt1211/chip.h b/src/superio/via/vt1211/chip.h index 2154996..3fcd6ae 100644 --- a/src/superio/via/vt1211/chip.h +++ b/src/superio/via/vt1211/chip.h @@ -26,7 +26,7 @@ extern struct chip_operations superio_via_vt1211_ops;
struct superio_via_vt1211_config { - + };
#endif diff --git a/src/superio/winbond/w83627dhg/chip.h b/src/superio/winbond/w83627dhg/chip.h index 51c56e8..b516aac 100644 --- a/src/superio/winbond/w83627dhg/chip.h +++ b/src/superio/winbond/w83627dhg/chip.h @@ -27,7 +27,7 @@ extern struct chip_operations superio_winbond_w83627dhg_ops;
struct superio_winbond_w83627dhg_config { - + struct pc_keyboard keyboard; };
diff --git a/src/superio/winbond/w83627ehg/chip.h b/src/superio/winbond/w83627ehg/chip.h index f3fe8ce..a16135d 100644 --- a/src/superio/winbond/w83627ehg/chip.h +++ b/src/superio/winbond/w83627ehg/chip.h @@ -28,7 +28,7 @@ extern struct chip_operations superio_winbond_w83627ehg_ops;
struct superio_winbond_w83627ehg_config { - + struct pc_keyboard keyboard; };
diff --git a/src/superio/winbond/w83627hf/chip.h b/src/superio/winbond/w83627hf/chip.h index 14793dd..64d9920 100644 --- a/src/superio/winbond/w83627hf/chip.h +++ b/src/superio/winbond/w83627hf/chip.h @@ -29,7 +29,7 @@ extern struct chip_operations superio_winbond_w83627hf_ops;
struct superio_winbond_w83627hf_config { - + struct pc_keyboard keyboard; };
diff --git a/src/superio/winbond/w83627thg/chip.h b/src/superio/winbond/w83627thg/chip.h index 8da6954..ce06485 100644 --- a/src/superio/winbond/w83627thg/chip.h +++ b/src/superio/winbond/w83627thg/chip.h @@ -29,7 +29,7 @@ extern struct chip_operations superio_winbond_w83627thg_ops;
struct superio_winbond_w83627thg_config { - + struct pc_keyboard keyboard; };
diff --git a/src/superio/winbond/w83627uhg/chip.h b/src/superio/winbond/w83627uhg/chip.h index ffabfa5..2802382 100644 --- a/src/superio/winbond/w83627uhg/chip.h +++ b/src/superio/winbond/w83627uhg/chip.h @@ -27,7 +27,7 @@ extern struct chip_operations superio_winbond_w83627uhg_ops;
struct superio_winbond_w83627uhg_config { - + struct pc_keyboard keyboard; };
diff --git a/src/superio/winbond/w83697hf/chip.h b/src/superio/winbond/w83697hf/chip.h index dd54a52..1a1cbcc 100644 --- a/src/superio/winbond/w83697hf/chip.h +++ b/src/superio/winbond/w83697hf/chip.h @@ -26,7 +26,7 @@ extern struct chip_operations superio_winbond_w83697hf_ops;
struct superio_winbond_w83697hf_config { - + };
#endif diff --git a/src/superio/winbond/w83977f/chip.h b/src/superio/winbond/w83977f/chip.h index 1c12697..aacb009 100644 --- a/src/superio/winbond/w83977f/chip.h +++ b/src/superio/winbond/w83977f/chip.h @@ -27,7 +27,7 @@ extern struct chip_operations superio_winbond_w83977f_ops;
struct superio_winbond_w83977f_config { - + struct pc_keyboard keyboard; };
diff --git a/src/superio/winbond/w83977tf/chip.h b/src/superio/winbond/w83977tf/chip.h index cc24fc0..80c4afd 100644 --- a/src/superio/winbond/w83977tf/chip.h +++ b/src/superio/winbond/w83977tf/chip.h @@ -29,7 +29,7 @@ extern struct chip_operations superio_winbond_w83977tf_ops;
struct superio_winbond_w83977tf_config { - + struct pc_keyboard keyboard; };
diff --git a/util/cbfstool/cbfs-mkstage.c b/util/cbfstool/cbfs-mkstage.c index c9163ef..6b80a37 100644 --- a/util/cbfstool/cbfs-mkstage.c +++ b/util/cbfstool/cbfs-mkstage.c @@ -36,7 +36,7 @@ unsigned int idemp(unsigned int x) return x; }
-/* This is a wrapper around the swab32() macro to make it +/* This is a wrapper around the swab32() macro to make it * usable for the current implementation of parse_elf_to_stage() */ static unsigned int swap32(unsigned int x) diff --git a/util/ectool/ec.c b/util/ectool/ec.c index 5bff0c2..0f5b891 100644 --- a/util/ectool/ec.c +++ b/util/ectool/ec.c @@ -126,7 +126,7 @@ int ec_ext_write(uint16_t addr, uint8_t data) send_ec_data(addr & 0xff); send_ec_command(WX_EC); send_ec_data(addr >> 8); - + return send_ec_data(data); }
diff --git a/util/ifdtool/ifdtool.c b/util/ifdtool/ifdtool.c index 204c449..eb91b2c 100644 --- a/util/ifdtool/ifdtool.c +++ b/util/ifdtool/ifdtool.c @@ -311,7 +311,7 @@ void inject_region(char *filename, char *image, int size, int region_type, exit(EXIT_FAILURE); frba_t *frba = (frba_t *) (image + (((fdb->flmap0 >> 16) & 0xff) << 4)); - + region_t region = get_region(frba, region_type); if (region.size <= 0xfff) { fprintf(stderr, "Region %s is disabled in target. Not injecting.\n", diff --git a/util/nvramtool/accessors/cmos-hw-unix.c b/util/nvramtool/accessors/cmos-hw-unix.c index 6d42cb5..9a39a0c 100644 --- a/util/nvramtool/accessors/cmos-hw-unix.c +++ b/util/nvramtool/accessors/cmos-hw-unix.c @@ -18,7 +18,7 @@ #include <DirectHW/DirectHW.h> #endif #if defined(__NetBSD__) -#if defined(__i386__) || defined(__x86_64__) +#if defined(__i386__) || defined(__x86_64__) #include <machine/sysarch.h>
static inline void outb(uint8_t value, uint16_t port) diff --git a/util/nvramtool/cli/nvramtool.c b/util/nvramtool/cli/nvramtool.c index bc929da..11a1a70 100644 --- a/util/nvramtool/cli/nvramtool.c +++ b/util/nvramtool/cli/nvramtool.c @@ -140,13 +140,13 @@ int main(int argc, char *argv[]) fprintf(stderr, "Couldn't stat '%s'\n", nvramtool_op_modifiers[NVRAMTOOL_MOD_USE_CMOS_FILE].param); exit(1); } - + if (fd_stat.st_size < 128) { lseek(fd, 127, SEEK_SET); write(fd, "\0", 1); fsync(fd); } - + cmos_default = mmap(NULL, 128, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0); if (cmos_default == MAP_FAILED) { fprintf(stderr, "Couldn't map '%s'\n", nvramtool_op_modifiers[NVRAMTOOL_MOD_USE_CMOS_FILE].param); diff --git a/util/sconfig/main.c b/util/sconfig/main.c old mode 100755 new mode 100644 diff --git a/util/sconfig/sconfig.h b/util/sconfig/sconfig.h old mode 100755 new mode 100644 diff --git a/util/superiotool/amd.c b/util/superiotool/amd.c index 1c03523..5041ba8 100644 --- a/util/superiotool/amd.c +++ b/util/superiotool/amd.c @@ -90,7 +90,7 @@ uint16_t detect_ec(void) return 0;
ec_port = pci_read_word(dev, 0xa4); - + if (!(ec_port & 0x1)) return 0;
diff --git a/util/superiotool/nuvoton.c b/util/superiotool/nuvoton.c index 72bcad9..6a1a75c 100644 --- a/util/superiotool/nuvoton.c +++ b/util/superiotool/nuvoton.c @@ -257,7 +257,7 @@ void probe_idregs_nuvoton(uint16_t port) chip_found = 1; dump_superio("Nuvoton", reg_table, port, chip_id, LDN_SEL); return; - } + }
if (verbose) printf(NOTFOUND "chip_id=0x%04x\n", chip_id);