Dear Jose & Nico,
Thank you very much for your help !
Best regards, Zvika
On Thu, Jun 21, 2018 at 11:28 AM Jose Trujillo ce.autom@protonmail.com wrote:
Hello Zvika, Look for the list of Linux commands to dump many of the information from your original BIOS running, maybe there you will find this information.
Also, some configuration can be seen from your original BIOS running Intel FIT for Baytrail in Windows.
About configuring those settings in coreboot look for other examples in the coreboot tree about configuring PCI devices in devicetree.cb and other places.
I Am new to coreboot too and please correct me if I Am wrong. Good Luck! J. Trujillo
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ On June 21, 2018 3:34 AM, Zvi Vered veredz72@gmail.com wrote:
Hello,
Thank you very much for the detailed reply. Vendor's BIOS contains few peripherals initialization. For example: PCIe enumeration, SATA controller, USB etc. In case of PCIe enumeration, the generation of PCIe (1,2,3) can be set. Should vendor supply code for this ? or any other information ? How can I write it from scratch ? Can Intel provide information on how to implement this initialization ?
Thank you, Zvika
On Mon, Jun 18, 2018 at 11:22 AM Jose Trujillo via coreboot < coreboot@coreboot.org> wrote:
Hello Zvika: 1.- Usually it is not necessary to change the CBFS size unless the compiler complain of lack of space. 2.- You should not worry about this setting to make your system to work. 3.- You should not use FSP_PACKAGE_DEFAULT if your plan is to use SIO because it will enable SOC internal COM1, instead (if your plan is to use FSP) enable FSP and add a VGA bios bin manually.... (The use of FSP is optional but I never tried without FSP). 4.- You need to add them yourself, there are examples to follow in this mail list. Good luck! J.Trujillo
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ On June 18, 2018 6:24 AM, Zvi Vered veredz72@gmail.com wrote:
Hello, I inspected the "Bayley Baay FSP-based CRB" sample in coreboot. after make distclean I chose: Mainboard vendor: Intel Mainboard model: Bayley Bay FSP-based CRB
- The size of CBFS is: 0x200000. Is it a fix size or should I change it
according to my board (which is also bay trail) ? 2. According to "dmidecode" I ran on my target, "Address: 0xE0000" Should I set this address in coreboot configuration ? How ?
- In this board default configuration, "Configure defaults for the Intel
FSP package" is not selected. Is it possible that this board does not use Intel FSP at all ? Under "Generic Drivers", "Use Intel firmware Support Package' is also not selected.
- Under "chipset", there is no option to set "Super I/O". Can you please
tell why ? 5. I noticed that the minimum ROM size is 2MB. If I set 4MB, the size of coreboot.rom is also 4MB.
Thank you in advance, Zvika
-- coreboot mailing list: coreboot@coreboot.org https://mail.coreboot.org/mailman/listinfo/coreboot