Hi,
I don't know if it could help, i've gathered every used options in V2. It helped me because of V1 to V2 port : some options aren't used any more (e.g. side solutions incorporated in LB becoming "standards" needn't a activated option to be taken into consideration in build) while some other options change their name..
It maybe miss someones.
mathieu. --------------------------
LIST OF THE DIFFERENT OPTIONS FOUND IN CONFIG.LBs, IN *.C (this means not all are usable into config.lb)
AUTOBOOT_CMDLINE __BIG_ENDIAN __BIG_ENDIAN__ CHECK_FOR_SLAVES CONFIG_BRIQ_7400 CONFIG_BRIQ_750FX CONFIG_CONSOLE_BTEXT CONFIG_CONSOLE_LOGBUF CONFIG_CONSOLE_SERIAL8250 CONFIG_CONSOLE_SROM CONFIG_CONSOLE_VGA CONFIG_FS_EXT2 CONFIG_FS_FAT CONFIG_FS_ISO9660 CONFIG_FS_STREAM CONFIG_IDE CONFIG_IDE_STREAM CONFIG_IOAPIC CONFIG_LEGACY_VGABIOS CONFIG_MAX_CPUS CONFIG_ROM_STREAM CONFIG_ROM_STREAM_START CONFIG_SANDPOINT_ALTIMUS CONFIG_SANDPOINT_GYRUS CONFIG_SANDPOINT_TALUS CONFIG_SANDPOINT_UNITY CONFIG_SANDPOINT_VALIS CONFIG_SDRAM_BANK0 CONFIG_SMP CONFIG_UDELAY_TSC CONFIG_USE_INIT CPU_FIXUP DCACHE_RAM_BASE DCACHE_RAM_SIZE DEBUG DEBUG_BOOT DEBUG_CONSOLE DEBUG_CONSOLE_SERIAL DEBUG_CONSOLE_VGA DEBUG_GDB DEBUG_SETNORTHB DECODE DRAM_MIN_CYCLE_TIME E2DEBUG ENCODE FALLBACK_SIZE HARD_RESET_BUS HARD_RESET_DEVICE HARD_RESET_FUNCTION HAVE_ACPI_HPET HAVE_ACPI_TABLES HAVE_FALLBACK_BOOT HAVE_HARD_RESET HAVE_MP_TABLE HAVE_OPTION_TABLE HAVE_PIRQ_TABLE HEAP_SIZE IN_MODULE INTEL_PPRO_MTRR _IO_BASE IRQ_SLOT_COUNT ISA_IO_BASE ISA_MEM_BASE k8 LB_CKS_LOC LB_CKS_RANGE_END LB_CKS_RANGE_START MAIN MAINBOARD MAINBOARD_PART_NUMBER MAINBOARD_VENDOR ONE_TRACK PAYLOAD_SIZE PCIC0_CFGADDR PCIC0_CFGDATA PNP_CFGADDR PNP_CFGDATA _RAMBASE _ROMBASE ROM_IMAGE_SIZE ROM_SECTION_OFFSET ROM_SECTION_SIZE ROM_SIZE SAFE STACK_SIZE SWD_BEST_OFF TTYS0_BASE UCL_DEBUG USE_DCACHE_RAM USE_FALLBACK_IMAGE USE_OPTION_TABLE VERBOSE VGABIOS_START X86EMU_FPU_PRESENT XIP_ROM_BASE XIP_ROM_SIZ
COMPLETE LIST OF EVERY OPTIONS USED AND THEIR EXACT LOCATIONS:
# cat options.list Here are listed the options in the if directive in source's Config.lb
FILE LINE OPTIONS -------------------------------------------------------
./arch/i386/boot/Config.lb 10 if HAVE_ACPI_TABLES ./arch/i386/boot/Config.lb 7 if HAVE_PIRQ_TABLE ./arch/i386/Config.lb 42 if CONFIG_SMP ./arch/i386/smp/Config.lb 4 if HAVE_MP_TABLE ./arch/i386/smp/Config.lb 8 if CONFIG_SMP ./boot/Config.lb 3 if CONFIG_FS_STREAM ./config/Config.lb 142 if HAVE_OPTION_TABLE ./console/Config.lb 12 if CONFIG_CONSOLE_BTEXT ./console/Config.lb 15 if CONFIG_CONSOLE_LOGBUF ./console/Config.lb 18 if CONFIG_CONSOLE_SROM ./console/Config.lb 24 if CONFIG_USE_INIT ./console/Config.lb 6 if CONFIG_CONSOLE_SERIAL8250 ./console/Config.lb 9 if CONFIG_CONSOLE_VGA ./cpu/k8/Config.lb 9 if CPU_FIXUP ./cpu/p5/Config.lb 4 if CONFIG_UDELAY_TSC object delay_tsc.o end ./lib/Config.lb 12 if HAVE_FALLBACK_BOOT ./lib/Config.lb 20 if CONFIG_USE_INIT ./mainboard/amd/quartet/Config.lb 125 if USE_FALLBACK_IMAGE ./mainboard/amd/quartet/Config.lb 168 if HAVE_MP_TABLE object mptable.o end ./mainboard/amd/quartet/Config.lb 169 if HAVE_PIRQ_TABLE object irq_tables.o end ./mainboard/amd/quartet/Config.lb 205 if USE_FALLBACK_IMAGE ./mainboard/amd/quartet/Config.lb 232 if USE_FALLBACK_IMAGE ./mainboard/amd/solo/Config.lb 124 if USE_FALLBACK_IMAGE ./mainboard/amd/solo/Config.lb 167 if HAVE_MP_TABLE object mptable.o end ./mainboard/amd/solo/Config.lb 168 if HAVE_PIRQ_TABLE object irq_tables.o end ./mainboard/amd/solo/Config.lb 204 if USE_FALLBACK_IMAGE ./mainboard/amd/solo/Config.lb 231 if USE_FALLBACK_IMAGE ./mainboard/arima/hdama/Config.lb 125 if USE_FALLBACK_IMAGE ./mainboard/arima/hdama/Config.lb 168 if HAVE_MP_TABLE object mptable.o end ./mainboard/arima/hdama/Config.lb 169 if HAVE_PIRQ_TABLE object irq_tables.o end ./mainboard/arima/hdama/Config.lb 205 if USE_FALLBACK_IMAGE ./mainboard/arima/hdama/Config.lb 232 if USE_FALLBACK_IMAGE ./mainboard/ibm/e325/Config.lb 125 if USE_FALLBACK_IMAGE ./mainboard/ibm/e325/Config.lb 168 if HAVE_MP_TABLE object mptable.o end ./mainboard/ibm/e325/Config.lb 169 if HAVE_PIRQ_TABLE object irq_tables.o end ./mainboard/ibm/e325/Config.lb 205 if USE_FALLBACK_IMAGE ./mainboard/ibm/e325/Config.lb 232 if USE_FALLBACK_IMAGE ./mainboard/Iwill/DK8S2/Config.lb 112 if USE_FALLBACK_IMAGE ./mainboard/Iwill/DK8S2/Config.lb 157 if HAVE_MP_TABLE object mptable.o end ./mainboard/Iwill/DK8S2/Config.lb 158 if HAVE_PIRQ_TABLE object irq_tables.o end ./mainboard/Iwill/DK8S2/Config.lb 193 if USE_FALLBACK_IMAGE ./mainboard/Iwill/DK8S2/Config.lb 220 if USE_FALLBACK_IMAGE ./mainboard/Iwill/DK8X/Config.lb 112 if USE_FALLBACK_IMAGE ./mainboard/Iwill/DK8X/Config.lb 157 if HAVE_MP_TABLE object mptable.o end ./mainboard/Iwill/DK8X/Config.lb 158 if HAVE_PIRQ_TABLE object irq_tables.o end ./mainboard/Iwill/DK8X/Config.lb 193 if USE_FALLBACK_IMAGE ./mainboard/Iwill/DK8X/Config.lb 220 if USE_FALLBACK_IMAGE ./mainboard/motorola/sandpoint/Config.lb 39 if CONFIG_SANDPOINT_ALTIMUS ./mainboard/motorola/sandpoint/Config.lb 44 if CONFIG_SANDPOINT_TALUS ./mainboard/motorola/sandpoint/Config.lb 48 if CONFIG_SANDPOINT_UNITY ./mainboard/motorola/sandpoint/Config.lb 51 if CONFIG_SANDPOINT_VALIS ./mainboard/motorola/sandpoint/Config.lb 54 if CONFIG_SANDPOINT_GYRUS ./mainboard/newisys/khepri/Config.lb 125 if USE_FALLBACK_IMAGE ./mainboard/newisys/khepri/Config.lb 168 if HAVE_MP_TABLE object mptable.o end ./mainboard/newisys/khepri/Config.lb 169 if HAVE_PIRQ_TABLE object irq_tables.o end ./mainboard/newisys/khepri/Config.lb 207 if USE_FALLBACK_IMAGE ./mainboard/newisys/khepri/Config.lb 234 if USE_FALLBACK_IMAGE ./mainboard/totalimpact/briq/Config.lb 36 if CONFIG_BRIQ_750FX ./mainboard/totalimpact/briq/Config.lb 39 if CONFIG_BRIQ_7400 ./mainboard/tyan/s2850/Config.lb 101 if USE_FALLBACK_IMAGE ./mainboard/tyan/s2850/Config.lb 43 if HAVE_MP_TABLE object mptable.o end ./mainboard/tyan/s2850/Config.lb 44 if HAVE_PIRQ_TABLE object irq_tables.o end ./mainboard/tyan/s2850/Config.lb 65 if USE_FALLBACK_IMAGE ./mainboard/tyan/s2850/Config.lb 88 if USE_FALLBACK_IMAGE ./mainboard/tyan/s2880/Config.lb 41 if HAVE_MP_TABLE object mptable.o end ./mainboard/tyan/s2880/Config.lb 42 if HAVE_PIRQ_TABLE object irq_tables.o end ./mainboard/tyan/s2880/Config.lb 62 if USE_FALLBACK_IMAGE ./mainboard/tyan/s2880/Config.lb 85 if USE_FALLBACK_IMAGE ./mainboard/tyan/s2880/Config.lb 98 if USE_FALLBACK_IMAGE ./mainboard/tyan/s2881/Config.lb 101 if USE_FALLBACK_IMAGE ./mainboard/tyan/s2881/Config.lb 43 if HAVE_MP_TABLE object mptable.o end ./mainboard/tyan/s2881/Config.lb 44 if HAVE_PIRQ_TABLE object irq_tables.o end ./mainboard/tyan/s2881/Config.lb 65 if USE_FALLBACK_IMAGE ./mainboard/tyan/s2881/Config.lb 88 if USE_FALLBACK_IMAGE ./mainboard/tyan/s2882/Config.lb 41 if HAVE_MP_TABLE object mptable.o end ./mainboard/tyan/s2882/Config.lb 42 if HAVE_PIRQ_TABLE object irq_tables.o end ./mainboard/tyan/s2882/Config.lb 63 if USE_FALLBACK_IMAGE ./mainboard/tyan/s2882/Config.lb 86 if USE_FALLBACK_IMAGE ./mainboard/tyan/s2882/Config.lb 99 if USE_FALLBACK_IMAGE ./mainboard/tyan/s2885/Config.lb 103 if USE_FALLBACK_IMAGE ./mainboard/tyan/s2885/Config.lb 43 if HAVE_MP_TABLE object mptable.o end ./mainboard/tyan/s2885/Config.lb 44 if HAVE_PIRQ_TABLE object irq_tables.o end ./mainboard/tyan/s2885/Config.lb 67 if USE_FALLBACK_IMAGE ./mainboard/tyan/s2885/Config.lb 90 if USE_FALLBACK_IMAGE ./mainboard/tyan/s4880/Config.lb 100 if USE_FALLBACK_IMAGE ./mainboard/tyan/s4880/Config.lb 42 if HAVE_MP_TABLE object mptable.o end ./mainboard/tyan/s4880/Config.lb 43 if HAVE_PIRQ_TABLE object irq_tables.o end ./mainboard/tyan/s4880/Config.lb 64 if USE_FALLBACK_IMAGE ./mainboard/tyan/s4880/Config.lb 87 if USE_FALLBACK_IMAGE ./mainboard/tyan/s4882/Config.lb 101 if USE_FALLBACK_IMAGE ./mainboard/tyan/s4882/Config.lb 43 if HAVE_MP_TABLE object mptable.o end ./mainboard/tyan/s4882/Config.lb 44 if HAVE_PIRQ_TABLE object irq_tables.o end ./mainboard/tyan/s4882/Config.lb 65 if USE_FALLBACK_IMAGE ./mainboard/tyan/s4882/Config.lb 88 if USE_FALLBACK_IMAGE ./mainboard/via/epia/Config.lb 162 if USE_FALLBACK_IMAGE ./mainboard/via/epia/Config.lb 189 if USE_FALLBACK_IMAGE ./mainboard/via/epia/Config.lb 84 if USE_FALLBACK_IMAGE ./pc80/Config.lb 14 if CONFIG_IDE ./pc80/Config.lb 20 if CONFIG_LEGACY_VGABIOS ./stream/Config.lb 10 if CONFIG_IDE_STREAM ./stream/Config.lb 15 if CONFIG_FS_STREAM ./stream/Config.lb 6 if CONFIG_ROM_STREAM ./stream/fs/Config.lb 12 if CONFIG_FS_ISO9660 ./stream/fs/Config.lb 16 if CONFIG_FS_FAT ./stream/fs/Config.lb 8 if CONFIG_FS_EXT2
Here are listed the options in the uses directive in source's Config.lb -------------------------------------------------------------------------
FILE LINE OPTIONS -------------------------------------------------------
./arch/i386/boot/Config.lb 1 uses HAVE_PIRQ_TABLE ./arch/i386/boot/Config.lb 2 uses HAVE_ACPI_TABLES ./arch/i386/Config.lb 1 uses CONFIG_SMP ./arch/i386/smp/Config.lb 1 uses HAVE_MP_TABLE ./arch/i386/smp/Config.lb 2 uses CONFIG_SMP ./config/Config.lb 3 uses HAVE_OPTION_TABLE ./console/Config.lb 1 uses CONFIG_CONSOLE_SERIAL8250 CONFIG_CONSOLE_VGA CONFIG_CONSOLE_BTEXT ./console/Config.lb 2 uses CONFIG_CONSOLE_LOGBUF CONFIG_CONSOLE_SROM ./console/Config.lb 3 uses CONFIG_USE_INIT ./cpu/k7/Config.lb 1 uses k7 ./cpu/k7/Config.lb 2 uses CPU_FIXUP ./cpu/k8/Config.lb 4 uses k8 ./cpu/k8/Config.lb 5 uses CPU_FIXUP ./cpu/p5/Config.lb 1 uses CONFIG_UDELAY_TSC ./cpu/p6/Config.lb 1 uses INTEL_PPRO_MTRR ./cpu/ppc/mpc74xx/Config.lb 4 uses _RAMBASE ./cpu/ppc/mpc74xx/Config.lb 5 uses USE_DCACHE_RAM ./cpu/ppc/mpc74xx/Config.lb 6 uses DCACHE_RAM_BASE ./cpu/ppc/mpc74xx/Config.lb 7 uses DCACHE_RAM_SIZE ./cpu/ppc/ppc4xx/Config.lb 4 uses _RAMBASE ./cpu/ppc/ppc4xx/Config.lb 5 uses USE_DCACHE_RAM ./cpu/ppc/ppc4xx/Config.lb 6 uses DCACHE_RAM_BASE ./cpu/ppc/ppc4xx/Config.lb 7 uses DCACHE_RAM_SIZE ./cpu/ppc/ppc7xx/Config.lb 4 uses _RAMBASE ./cpu/ppc/ppc7xx/Config.lb 5 uses USE_DCACHE_RAM ./cpu/ppc/ppc7xx/Config.lb 6 uses DCACHE_RAM_BASE ./cpu/ppc/ppc7xx/Config.lb 7 uses DCACHE_RAM_SIZE ./lib/Config.lb 1 uses HAVE_FALLBACK_BOOT ./lib/Config.lb 2 uses CONFIG_USE_INIT ./mainboard/amd/quartet/Config.lb 10 uses HAVE_OPTION_TABLE ./mainboard/amd/quartet/Config.lb 11 uses CONFIG_MAX_CPUS ./mainboard/amd/quartet/Config.lb 12 uses CONFIG_IOAPIC ./mainboard/amd/quartet/Config.lb 13 uses CONFIG_SMP ./mainboard/amd/quartet/Config.lb 14 uses FALLBACK_SIZE ./mainboard/amd/quartet/Config.lb 15 uses ROM_SIZE ./mainboard/amd/quartet/Config.lb 16 uses ROM_SECTION_SIZE ./mainboard/amd/quartet/Config.lb 17 uses ROM_IMAGE_SIZE ./mainboard/amd/quartet/Config.lb 18 uses ROM_SECTION_SIZE ./mainboard/amd/quartet/Config.lb 19 uses ROM_SECTION_OFFSET ./mainboard/amd/quartet/Config.lb 1 uses HAVE_MP_TABLE ./mainboard/amd/quartet/Config.lb 20 uses CONFIG_ROM_STREAM ./mainboard/amd/quartet/Config.lb 21 uses CONFIG_ROM_STREAM_START ./mainboard/amd/quartet/Config.lb 22 uses PAYLOAD_SIZE ./mainboard/amd/quartet/Config.lb 23 uses _ROMBASE ./mainboard/amd/quartet/Config.lb 24 uses XIP_ROM_SIZE ./mainboard/amd/quartet/Config.lb 25 uses XIP_ROM_BASE ./mainboard/amd/quartet/Config.lb 26 uses STACK_SIZE ./mainboard/amd/quartet/Config.lb 27 uses HEAP_SIZE ./mainboard/amd/quartet/Config.lb 28 uses USE_OPTION_TABLE ./mainboard/amd/quartet/Config.lb 29 uses LB_CKS_RANGE_START ./mainboard/amd/quartet/Config.lb 2 uses HAVE_PIRQ_TABLE ./mainboard/amd/quartet/Config.lb 30 uses LB_CKS_RANGE_END ./mainboard/amd/quartet/Config.lb 31 uses LB_CKS_LOC ./mainboard/amd/quartet/Config.lb 32 uses MAINBOARD_PART_NUMBER ./mainboard/amd/quartet/Config.lb 33 uses MAINBOARD_VENDOR ./mainboard/amd/quartet/Config.lb 3 uses USE_FALLBACK_IMAGE ./mainboard/amd/quartet/Config.lb 4 uses HAVE_FALLBACK_BOOT ./mainboard/amd/quartet/Config.lb 5 uses HAVE_HARD_RESET ./mainboard/amd/quartet/Config.lb 6 uses HARD_RESET_BUS ./mainboard/amd/quartet/Config.lb 7 uses HARD_RESET_DEVICE ./mainboard/amd/quartet/Config.lb 8 uses HARD_RESET_FUNCTION ./mainboard/amd/quartet/Config.lb 9 uses IRQ_SLOT_COUNT ./mainboard/amd/solo/Config.lb 10 uses HAVE_OPTION_TABLE ./mainboard/amd/solo/Config.lb 11 uses CONFIG_MAX_CPUS ./mainboard/amd/solo/Config.lb 12 uses CONFIG_IOAPIC ./mainboard/amd/solo/Config.lb 13 uses CONFIG_SMP ./mainboard/amd/solo/Config.lb 14 uses FALLBACK_SIZE ./mainboard/amd/solo/Config.lb 15 uses ROM_SIZE ./mainboard/amd/solo/Config.lb 16 uses ROM_SECTION_SIZE ./mainboard/amd/solo/Config.lb 17 uses ROM_IMAGE_SIZE ./mainboard/amd/solo/Config.lb 18 uses ROM_SECTION_SIZE ./mainboard/amd/solo/Config.lb 19 uses ROM_SECTION_OFFSET ./mainboard/amd/solo/Config.lb 1 uses HAVE_MP_TABLE ./mainboard/amd/solo/Config.lb 20 uses CONFIG_ROM_STREAM ./mainboard/amd/solo/Config.lb 21 uses CONFIG_ROM_STREAM_START ./mainboard/amd/solo/Config.lb 22 uses PAYLOAD_SIZE ./mainboard/amd/solo/Config.lb 23 uses _ROMBASE ./mainboard/amd/solo/Config.lb 24 uses XIP_ROM_SIZE ./mainboard/amd/solo/Config.lb 25 uses XIP_ROM_BASE ./mainboard/amd/solo/Config.lb 26 uses STACK_SIZE ./mainboard/amd/solo/Config.lb 27 uses HEAP_SIZE ./mainboard/amd/solo/Config.lb 28 uses USE_OPTION_TABLE ./mainboard/amd/solo/Config.lb 29 uses LB_CKS_RANGE_START ./mainboard/amd/solo/Config.lb 2 uses HAVE_PIRQ_TABLE ./mainboard/amd/solo/Config.lb 30 uses LB_CKS_RANGE_END ./mainboard/amd/solo/Config.lb 31 uses LB_CKS_LOC ./mainboard/amd/solo/Config.lb 32 uses MAINBOARD_PART_NUMBER ./mainboard/amd/solo/Config.lb 33 uses MAINBOARD_VENDOR ./mainboard/amd/solo/Config.lb 3 uses USE_FALLBACK_IMAGE ./mainboard/amd/solo/Config.lb 4 uses HAVE_FALLBACK_BOOT ./mainboard/amd/solo/Config.lb 5 uses HAVE_HARD_RESET ./mainboard/amd/solo/Config.lb 6 uses HARD_RESET_BUS ./mainboard/amd/solo/Config.lb 7 uses HARD_RESET_DEVICE ./mainboard/amd/solo/Config.lb 8 uses HARD_RESET_FUNCTION ./mainboard/amd/solo/Config.lb 9 uses IRQ_SLOT_COUNT ./mainboard/arima/hdama/Config.lb 10 uses HAVE_OPTION_TABLE ./mainboard/arima/hdama/Config.lb 11 uses CONFIG_MAX_CPUS ./mainboard/arima/hdama/Config.lb 12 uses CONFIG_IOAPIC ./mainboard/arima/hdama/Config.lb 13 uses CONFIG_SMP ./mainboard/arima/hdama/Config.lb 14 uses FALLBACK_SIZE ./mainboard/arima/hdama/Config.lb 15 uses ROM_SIZE ./mainboard/arima/hdama/Config.lb 16 uses ROM_SECTION_SIZE ./mainboard/arima/hdama/Config.lb 17 uses ROM_IMAGE_SIZE ./mainboard/arima/hdama/Config.lb 18 uses ROM_SECTION_SIZE ./mainboard/arima/hdama/Config.lb 19 uses ROM_SECTION_OFFSET ./mainboard/arima/hdama/Config.lb 1 uses HAVE_MP_TABLE ./mainboard/arima/hdama/Config.lb 20 uses CONFIG_ROM_STREAM ./mainboard/arima/hdama/Config.lb 21 uses CONFIG_ROM_STREAM_START ./mainboard/arima/hdama/Config.lb 22 uses PAYLOAD_SIZE ./mainboard/arima/hdama/Config.lb 23 uses _ROMBASE ./mainboard/arima/hdama/Config.lb 24 uses XIP_ROM_SIZE ./mainboard/arima/hdama/Config.lb 25 uses XIP_ROM_BASE ./mainboard/arima/hdama/Config.lb 26 uses STACK_SIZE ./mainboard/arima/hdama/Config.lb 27 uses HEAP_SIZE ./mainboard/arima/hdama/Config.lb 28 uses USE_OPTION_TABLE ./mainboard/arima/hdama/Config.lb 29 uses LB_CKS_RANGE_START ./mainboard/arima/hdama/Config.lb 2 uses HAVE_PIRQ_TABLE ./mainboard/arima/hdama/Config.lb 30 uses LB_CKS_RANGE_END ./mainboard/arima/hdama/Config.lb 31 uses LB_CKS_LOC ./mainboard/arima/hdama/Config.lb 32 uses MAINBOARD_PART_NUMBER ./mainboard/arima/hdama/Config.lb 33 uses MAINBOARD_VENDOR ./mainboard/arima/hdama/Config.lb 3 uses USE_FALLBACK_IMAGE ./mainboard/arima/hdama/Config.lb 4 uses HAVE_FALLBACK_BOOT ./mainboard/arima/hdama/Config.lb 5 uses HAVE_HARD_RESET ./mainboard/arima/hdama/Config.lb 6 uses HARD_RESET_BUS
./mainboard/arima/hdama/Config.lb 5 uses HAVE_HARD_RESET ./mainboard/arima/hdama/Config.lb 6 uses HARD_RESET_BUS ./mainboard/arima/hdama/Config.lb 7 uses HARD_RESET_DEVICE ./mainboard/arima/hdama/Config.lb 8 uses HARD_RESET_FUNCTION ./mainboard/arima/hdama/Config.lb 9 uses IRQ_SLOT_COUNT ./mainboard/embeddedplanet/ep405pc/Config.lb 10 uses _IO_BASE ./mainboard/embeddedplanet/ep405pc/Config.lb 5 uses PCIC0_CFGADDR ./mainboard/embeddedplanet/ep405pc/Config.lb 6 uses PCIC0_CFGDATA ./mainboard/embeddedplanet/ep405pc/Config.lb 7 uses ISA_IO_BASE ./mainboard/embeddedplanet/ep405pc/Config.lb 8 uses ISA_MEM_BASE ./mainboard/embeddedplanet/ep405pc/Config.lb 9 uses TTYS0_BASE ./mainboard/ibm/e325/Config.lb 10 uses HAVE_OPTION_TABLE ./mainboard/ibm/e325/Config.lb 11 uses CONFIG_MAX_CPUS ./mainboard/ibm/e325/Config.lb 12 uses CONFIG_IOAPIC ./mainboard/ibm/e325/Config.lb 13 uses CONFIG_SMP ./mainboard/ibm/e325/Config.lb 14 uses FALLBACK_SIZE ./mainboard/ibm/e325/Config.lb 15 uses ROM_SIZE ./mainboard/ibm/e325/Config.lb 16 uses ROM_SECTION_SIZE ./mainboard/ibm/e325/Config.lb 17 uses ROM_IMAGE_SIZE ./mainboard/ibm/e325/Config.lb 18 uses ROM_SECTION_SIZE ./mainboard/ibm/e325/Config.lb 19 uses ROM_SECTION_OFFSET ./mainboard/ibm/e325/Config.lb 1 uses HAVE_MP_TABLE ./mainboard/ibm/e325/Config.lb 20 uses CONFIG_ROM_STREAM ./mainboard/ibm/e325/Config.lb 21 uses CONFIG_ROM_STREAM_START ./mainboard/ibm/e325/Config.lb 22 uses PAYLOAD_SIZE ./mainboard/ibm/e325/Config.lb 23 uses _ROMBASE ./mainboard/ibm/e325/Config.lb 24 uses XIP_ROM_SIZE ./mainboard/ibm/e325/Config.lb 25 uses XIP_ROM_BASE ./mainboard/ibm/e325/Config.lb 26 uses STACK_SIZE ./mainboard/ibm/e325/Config.lb 27 uses HEAP_SIZE ./mainboard/ibm/e325/Config.lb 28 uses USE_OPTION_TABLE ./mainboard/ibm/e325/Config.lb 29 uses LB_CKS_RANGE_START ./mainboard/ibm/e325/Config.lb 2 uses HAVE_PIRQ_TABLE ./mainboard/ibm/e325/Config.lb 30 uses LB_CKS_RANGE_END ./mainboard/ibm/e325/Config.lb 31 uses LB_CKS_LOC ./mainboard/ibm/e325/Config.lb 32 uses MAINBOARD_PART_NUMBER ./mainboard/ibm/e325/Config.lb 33 uses MAINBOARD_VENDOR ./mainboard/ibm/e325/Config.lb 3 uses USE_FALLBACK_IMAGE ./mainboard/ibm/e325/Config.lb 4 uses HAVE_FALLBACK_BOOT ./mainboard/ibm/e325/Config.lb 5 uses HAVE_HARD_RESET ./mainboard/ibm/e325/Config.lb 6 uses HARD_RESET_BUS ./mainboard/ibm/e325/Config.lb 7 uses HARD_RESET_DEVICE ./mainboard/ibm/e325/Config.lb 8 uses HARD_RESET_FUNCTION ./mainboard/ibm/e325/Config.lb 9 uses IRQ_SLOT_COUNT ./mainboard/Iwill/DK8S2/Config.lb 10 uses HAVE_OPTION_TABLE ./mainboard/Iwill/DK8S2/Config.lb 11 uses CONFIG_MAX_CPUS ./mainboard/Iwill/DK8S2/Config.lb 12 uses CONFIG_IOAPIC ./mainboard/Iwill/DK8S2/Config.lb 13 uses CONFIG_SMP ./mainboard/Iwill/DK8S2/Config.lb 14 uses FALLBACK_SIZE ./mainboard/Iwill/DK8S2/Config.lb 15 uses ROM_SIZE ./mainboard/Iwill/DK8S2/Config.lb 16 uses ROM_SECTION_SIZE ./mainboard/Iwill/DK8S2/Config.lb 17 uses ROM_IMAGE_SIZE ./mainboard/Iwill/DK8S2/Config.lb 18 uses ROM_SECTION_SIZE ./mainboard/Iwill/DK8S2/Config.lb 19 uses ROM_SECTION_OFFSET ./mainboard/Iwill/DK8S2/Config.lb 1 uses HAVE_MP_TABLE ./mainboard/Iwill/DK8S2/Config.lb 20 uses CONFIG_ROM_STREAM ./mainboard/Iwill/DK8S2/Config.lb 21 uses CONFIG_ROM_STREAM_START ./mainboard/Iwill/DK8S2/Config.lb 22 uses PAYLOAD_SIZE ./mainboard/Iwill/DK8S2/Config.lb 23 uses _ROMBASE ./mainboard/Iwill/DK8S2/Config.lb 24 uses XIP_ROM_SIZE ./mainboard/Iwill/DK8S2/Config.lb 25 uses XIP_ROM_BASE ./mainboard/Iwill/DK8S2/Config.lb 26 uses STACK_SIZE ./mainboard/Iwill/DK8S2/Config.lb 27 uses HEAP_SIZE ./mainboard/Iwill/DK8S2/Config.lb 28 uses USE_OPTION_TABLE ./mainboard/Iwill/DK8S2/Config.lb 2 uses HAVE_PIRQ_TABLE ./mainboard/Iwill/DK8S2/Config.lb 3 uses USE_FALLBACK_IMAGE ./mainboard/Iwill/DK8S2/Config.lb 4 uses HAVE_FALLBACK_BOOT ./mainboard/Iwill/DK8S2/Config.lb 5 uses HAVE_HARD_RESET ./mainboard/Iwill/DK8S2/Config.lb 6 uses HARD_RESET_BUS ./mainboard/Iwill/DK8S2/Config.lb 7 uses HARD_RESET_DEVICE ./mainboard/Iwill/DK8S2/Config.lb 8 uses HARD_RESET_FUNCTION ./mainboard/Iwill/DK8S2/Config.lb 9 uses IRQ_SLOT_COUNT ./mainboard/Iwill/DK8X/Config.lb 10 uses HAVE_OPTION_TABLE ./mainboard/Iwill/DK8X/Config.lb 11 uses CONFIG_MAX_CPUS ./mainboard/Iwill/DK8X/Config.lb 12 uses CONFIG_IOAPIC ./mainboard/Iwill/DK8X/Config.lb 13 uses CONFIG_SMP ./mainboard/Iwill/DK8X/Config.lb 14 uses FALLBACK_SIZE ./mainboard/Iwill/DK8X/Config.lb 15 uses ROM_SIZE ./mainboard/Iwill/DK8X/Config.lb 16 uses ROM_SECTION_SIZE ./mainboard/Iwill/DK8X/Config.lb 17 uses ROM_IMAGE_SIZE ./mainboard/Iwill/DK8X/Config.lb 18 uses ROM_SECTION_SIZE ./mainboard/Iwill/DK8X/Config.lb 19 uses ROM_SECTION_OFFSET ./mainboard/Iwill/DK8X/Config.lb 1 uses HAVE_MP_TABLE ./mainboard/Iwill/DK8X/Config.lb 20 uses CONFIG_ROM_STREAM ./mainboard/Iwill/DK8X/Config.lb 21 uses CONFIG_ROM_STREAM_START ./mainboard/Iwill/DK8X/Config.lb 22 uses PAYLOAD_SIZE ./mainboard/Iwill/DK8X/Config.lb 23 uses _ROMBASE ./mainboard/Iwill/DK8X/Config.lb 24 uses XIP_ROM_SIZE ./mainboard/Iwill/DK8X/Config.lb 25 uses XIP_ROM_BASE ./mainboard/Iwill/DK8X/Config.lb 26 uses STACK_SIZE ./mainboard/Iwill/DK8X/Config.lb 27 uses HEAP_SIZE ./mainboard/Iwill/DK8X/Config.lb 28 uses USE_OPTION_TABLE ./mainboard/Iwill/DK8X/Config.lb 2 uses HAVE_PIRQ_TABLE ./mainboard/Iwill/DK8X/Config.lb 3 uses USE_FALLBACK_IMAGE ./mainboard/Iwill/DK8X/Config.lb 4 uses HAVE_FALLBACK_BOOT ./mainboard/Iwill/DK8X/Config.lb 5 uses HAVE_HARD_RESET ./mainboard/Iwill/DK8X/Config.lb 6 uses HARD_RESET_BUS ./mainboard/Iwill/DK8X/Config.lb 7 uses HARD_RESET_DEVICE ./mainboard/Iwill/DK8X/Config.lb 8 uses HARD_RESET_FUNCTION ./mainboard/Iwill/DK8X/Config.lb 9 uses IRQ_SLOT_COUNT ./mainboard/motorola/sandpoint/Config.lb 10 uses ISA_IO_BASE ./mainboard/motorola/sandpoint/Config.lb 11 uses ISA_MEM_BASE ./mainboard/motorola/sandpoint/Config.lb 12 uses PCIC0_CFGADDR ./mainboard/motorola/sandpoint/Config.lb 13 uses PCIC0_CFGDATA ./mainboard/motorola/sandpoint/Config.lb 14 uses PNP_CFGADDR ./mainboard/motorola/sandpoint/Config.lb 15 uses PNP_CFGDATA ./mainboard/motorola/sandpoint/Config.lb 16 uses _IO_BASE ./mainboard/motorola/sandpoint/Config.lb 5 uses CONFIG_SANDPOINT_ALTIMUS ./mainboard/motorola/sandpoint/Config.lb 6 uses CONFIG_SANDPOINT_TALUS ./mainboard/motorola/sandpoint/Config.lb 7 uses CONFIG_SANDPOINT_UNITY ./mainboard/motorola/sandpoint/Config.lb 8 uses CONFIG_SANDPOINT_VALIS ./mainboard/motorola/sandpoint/Config.lb 9 uses CONFIG_SANDPOINT_GYRUS ./mainboard/newisys/khepri/Config.lb 10 uses HAVE_OPTION_TABLE ./mainboard/newisys/khepri/Config.lb 11 uses CONFIG_MAX_CPUS ./mainboard/newisys/khepri/Config.lb 12 uses CONFIG_IOAPIC ./mainboard/newisys/khepri/Config.lb 13 uses CONFIG_SMP ./mainboard/newisys/khepri/Config.lb 14 uses FALLBACK_SIZE ./mainboard/newisys/khepri/Config.lb 15 uses ROM_SIZE ./mainboard/newisys/khepri/Config.lb 16 uses ROM_SECTION_SIZE ./mainboard/newisys/khepri/Config.lb 17 uses ROM_IMAGE_SIZE ./mainboard/newisys/khepri/Config.lb 18 uses ROM_SECTION_SIZE ./mainboard/newisys/khepri/Config.lb 19 uses ROM_SECTION_OFFSET ./mainboard/newisys/khepri/Config.lb 1 uses HAVE_MP_TABLE ./mainboard/newisys/khepri/Config.lb 20 uses CONFIG_ROM_STREAM ./mainboard/newisys/khepri/Config.lb 21 uses CONFIG_ROM_STREAM_START ./mainboard/newisys/khepri/Config.lb 22 uses PAYLOAD_SIZE ./mainboard/newisys/khepri/Config.lb 23 uses _ROMBASE ./mainboard/newisys/khepri/Config.lb 24 uses XIP_ROM_SIZE ./mainboard/newisys/khepri/Config.lb 25 uses XIP_ROM_BASE ./mainboard/newisys/khepri/Config.lb 26 uses STACK_SIZE ./mainboard/newisys/khepri/Config.lb 27 uses HEAP_SIZE ./mainboard/newisys/khepri/Config.lb 28 uses USE_OPTION_TABLE ./mainboard/newisys/khepri/Config.lb 29 uses LB_CKS_RANGE_START ./mainboard/newisys/khepri/Config.lb 2 uses HAVE_PIRQ_TABLE ./mainboard/newisys/khepri/Config.lb 30 uses LB_CKS_RANGE_END ./mainboard/newisys/khepri/Config.lb 31 uses LB_CKS_LOC ./mainboard/newisys/khepri/Config.lb 32 uses MAINBOARD_PART_NUMBER ./mainboard/newisys/khepri/Config.lb 33 uses MAINBOARD_VENDOR ./mainboard/newisys/khepri/Config.lb 3 uses USE_FALLBACK_IMAGE ./mainboard/newisys/khepri/Config.lb 4 uses HAVE_FALLBACK_BOOT ./mainboard/newisys/khepri/Config.lb 5 uses HAVE_HARD_RESET ./mainboard/newisys/khepri/Config.lb 6 uses HARD_RESET_BUS ./mainboard/newisys/khepri/Config.lb 7 uses HARD_RESET_DEVICE ./mainboard/newisys/khepri/Config.lb 8 uses HARD_RESET_FUNCTION ./mainboard/newisys/khepri/Config.lb 9 uses IRQ_SLOT_COUNT ./mainboard/totalimpact/briq/Config.lb 5 uses PCIC0_CFGADDR ./mainboard/totalimpact/briq/Config.lb 6 uses PCIC0_CFGDATA ./mainboard/totalimpact/briq/Config.lb 7 uses TTYS0_BASE ./mainboard/totalimpact/briq/Config.lb 8 uses CONFIG_BRIQ_750FX ./mainboard/totalimpact/briq/Config.lb 9 uses CONFIG_BRIQ_7400 ./mainboard/tyan/s2850/Config.lb 10 uses HARD_RESET_DEVICE ./mainboard/tyan/s2850/Config.lb 11 uses HARD_RESET_FUNCTION ./mainboard/tyan/s2850/Config.lb 1 uses HAVE_MP_TABLE ./mainboard/tyan/s2850/Config.lb 2 uses HAVE_PIRQ_TABLE ./mainboard/tyan/s2850/Config.lb 3 uses USE_FALLBACK_IMAGE ./mainboard/tyan/s2850/Config.lb 4 uses LB_CKS_RANGE_START ./mainboard/tyan/s2850/Config.lb 5 uses LB_CKS_RANGE_END ./mainboard/tyan/s2850/Config.lb 6 uses LB_CKS_LOC ./mainboard/tyan/s2850/Config.lb 7 uses MAINBOARD ./mainboard/tyan/s2850/Config.lb 8 uses ARCH ./mainboard/tyan/s2850/Config.lb 9 uses HARD_RESET_BUS ./mainboard/tyan/s2880/Config.lb 10 uses HARD_RESET_DEVICE ./mainboard/tyan/s2880/Config.lb 11 uses HARD_RESET_FUNCTION ./mainboard/tyan/s2880/Config.lb 1 uses HAVE_MP_TABLE ./mainboard/tyan/s2880/Config.lb 2 uses HAVE_PIRQ_TABLE ./mainboard/tyan/s2880/Config.lb 3 uses USE_FALLBACK_IMAGE ./mainboard/tyan/s2880/Config.lb 4 uses LB_CKS_RANGE_START ./mainboard/tyan/s2880/Config.lb 5 uses LB_CKS_RANGE_END ./mainboard/tyan/s2880/Config.lb 6 uses LB_CKS_LOC ./mainboard/tyan/s2880/Config.lb 7 uses MAINBOARD ./mainboard/tyan/s2880/Config.lb 8 uses ARCH ./mainboard/tyan/s2880/Config.lb 9 uses HARD_RESET_BUS ./mainboard/tyan/s2881/Config.lb 10 uses HARD_RESET_DEVICE ./mainboard/tyan/s2881/Config.lb 11 uses HARD_RESET_FUNCTION ./mainboard/tyan/s2881/Config.lb 1 uses HAVE_MP_TABLE ./mainboard/tyan/s2881/Config.lb 2 uses HAVE_PIRQ_TABLE ./mainboard/tyan/s2881/Config.lb 3 uses USE_FALLBACK_IMAGE ./mainboard/tyan/s2881/Config.lb 4 uses LB_CKS_RANGE_START ./mainboard/tyan/s2881/Config.lb 5 uses LB_CKS_RANGE_END ./mainboard/tyan/s2881/Config.lb 6 uses LB_CKS_LOC ./mainboard/tyan/s2881/Config.lb 7 uses MAINBOARD ./mainboard/tyan/s2881/Config.lb 8 uses ARCH ./mainboard/tyan/s2881/Config.lb 9 uses HARD_RESET_BUS ./mainboard/tyan/s2882/Config.lb 10 uses HARD_RESET_DEVICE ./mainboard/tyan/s2882/Config.lb 11 uses HARD_RESET_FUNCTION ./mainboard/tyan/s2882/Config.lb 1 uses HAVE_MP_TABLE ./mainboard/tyan/s2882/Config.lb 2 uses HAVE_PIRQ_TABLE ./mainboard/tyan/s2882/Config.lb 3 uses USE_FALLBACK_IMAGE ./mainboard/tyan/s2882/Config.lb 4 uses LB_CKS_RANGE_START ./mainboard/tyan/s2882/Config.lb 5 uses LB_CKS_RANGE_END ./mainboard/tyan/s2882/Config.lb 6 uses LB_CKS_LOC ./mainboard/tyan/s2882/Config.lb 7 uses MAINBOARD ./mainboard/tyan/s2882/Config.lb 8 uses ARCH ./mainboard/tyan/s2882/Config.lb 9 uses HARD_RESET_BUS ./mainboard/tyan/s2885/Config.lb 10 uses HARD_RESET_DEVICE ./mainboard/tyan/s2885/Config.lb 11 uses HARD_RESET_FUNCTION ./mainboard/tyan/s2885/Config.lb 1 uses HAVE_MP_TABLE ./mainboard/tyan/s2885/Config.lb 2 uses HAVE_PIRQ_TABLE ./mainboard/tyan/s2885/Config.lb 3 uses USE_FALLBACK_IMAGE ./mainboard/tyan/s2885/Config.lb 4 uses LB_CKS_RANGE_START ./mainboard/tyan/s2885/Config.lb 5 uses LB_CKS_RANGE_END ./mainboard/tyan/s2885/Config.lb 6 uses LB_CKS_LOC ./mainboard/tyan/s2885/Config.lb 7 uses MAINBOARD ./mainboard/tyan/s2885/Config.lb 8 uses ARCH ./mainboard/tyan/s2885/Config.lb 9 uses HARD_RESET_BUS ./mainboard/tyan/s4880/Config.lb 10 uses HARD_RESET_DEVICE ./mainboard/tyan/s4880/Config.lb 11 uses HARD_RESET_FUNCTION ./mainboard/tyan/s4880/Config.lb 1 uses HAVE_MP_TABLE ./mainboard/tyan/s4880/Config.lb 2 uses HAVE_PIRQ_TABLE ./mainboard/tyan/s4880/Config.lb 3 uses USE_FALLBACK_IMAGE ./mainboard/tyan/s4880/Config.lb 4 uses LB_CKS_RANGE_START ./mainboard/tyan/s4880/Config.lb 5 uses LB_CKS_RANGE_END ./mainboard/tyan/s4880/Config.lb 6 uses LB_CKS_LOC ./mainboard/tyan/s4880/Config.lb 7 uses MAINBOARD ./mainboard/tyan/s4880/Config.lb 8 uses ARCH ./mainboard/tyan/s4880/Config.lb 9 uses HARD_RESET_BUS ./mainboard/tyan/s4882/Config.lb 10 uses HARD_RESET_DEVICE ./mainboard/tyan/s4882/Config.lb 11 uses HARD_RESET_FUNCTION ./mainboard/tyan/s4882/Config.lb 1 uses HAVE_MP_TABLE ./mainboard/tyan/s4882/Config.lb 2 uses HAVE_PIRQ_TABLE ./mainboard/tyan/s4882/Config.lb 3 uses USE_FALLBACK_IMAGE ./mainboard/tyan/s4882/Config.lb 4 uses LB_CKS_RANGE_START ./mainboard/tyan/s4882/Config.lb 5 uses LB_CKS_RANGE_END ./mainboard/tyan/s4882/Config.lb 6 uses LB_CKS_LOC ./mainboard/tyan/s4882/Config.lb 7 uses MAINBOARD ./mainboard/tyan/s4882/Config.lb 8 uses ARCH ./mainboard/tyan/s4882/Config.lb 9 uses HARD_RESET_BUS ./mainboard/via/epia/Config.lb 10 uses HAVE_FALLBACK_BOOT ./mainboard/via/epia/Config.lb 11 uses HAVE_HARD_RESET ./mainboard/via/epia/Config.lb 12 uses HAVE_OPTION_TABLE ./mainboard/via/epia/Config.lb 13 uses USE_OPTION_TABLE ./mainboard/via/epia/Config.lb 14 uses CONFIG_ROM_STREAM ./mainboard/via/epia/Config.lb 15 uses IRQ_SLOT_COUNT ./mainboard/via/epia/Config.lb 16 uses MAINBOARD ./mainboard/via/epia/Config.lb 17 uses ARCH ./mainboard/via/epia/Config.lb 18 uses FALLBACK_SIZE ./mainboard/via/epia/Config.lb 19 uses STACK_SIZE ./mainboard/via/epia/Config.lb 20 uses HEAP_SIZE ./mainboard/via/epia/Config.lb 21 uses ROM_SIZE ./mainboard/via/epia/Config.lb 22 uses ROM_SECTION_SIZE ./mainboard/via/epia/Config.lb 23 uses ROM_IMAGE_SIZE ./mainboard/via/epia/Config.lb 24 uses ROM_SECTION_SIZE ./mainboard/via/epia/Config.lb 25 uses ROM_SECTION_OFFSET ./mainboard/via/epia/Config.lb 26 uses CONFIG_ROM_STREAM_START ./mainboard/via/epia/Config.lb 27 uses PAYLOAD_SIZE ./mainboard/via/epia/Config.lb 28 uses _ROMBASE ./mainboard/via/epia/Config.lb 29 uses XIP_ROM_SIZE ./mainboard/via/epia/Config.lb 30 uses XIP_ROM_BASE ./mainboard/via/epia/Config.lb 31 uses HAVE_MP_TABLE ./mainboard/via/epia/Config.lb 7 uses HAVE_MP_TABLE ./mainboard/via/epia/Config.lb 8 uses HAVE_PIRQ_TABLE ./mainboard/via/epia/Config.lb 9 uses USE_FALLBACK_IMAGE ./pc80/Config.lb 1 uses CONFIG_IDE ./pc80/Config.lb 2 uses CONFIG_LEGACY_VGABIOS ./stream/Config.lb 1 uses CONFIG_ROM_STREAM ./stream/Config.lb 2 uses CONFIG_IDE_STREAM ./stream/Config.lb 3 uses CONFIG_FS_STREAM ./stream/Config.lb 4 uses CONFIG_IDE ./stream/fs/Config.lb 1 uses CONFIG_FS_EXT2 ./stream/fs/Config.lb 2 uses CONFIG_FS_ISO9660 ./stream/fs/Config.lb 3 uses CONFIG_FS_FAT