On 28.09.2007 21:14, Robert Millan wrote:
On Thu, Sep 27, 2007 at 03:56:20PM +0200, Carl-Daniel Hailfinger wrote:
Please provide a diff between dmesg under LB and proprietary BIOS. I suspect some keyboard init is done differently.
Here.
There's quite some stuff broken. Comments below.
--- dmesg_lb 2007-09-28 21:13:12.000000000 +0200 +++ dmesg_bios 2007-09-28 21:13:12.000000000 +0200 @@ -1,50 +1,76 @@ Linux version 2.6.22-2-686 (Debian 2.6.22-4) (waldi@debian.org) (gcc version 4.1.3 20070812 (prerelease) (Debian 4.1.2-15)) #1 SMP Fri Aug 31 00:24:01 UTC 2007 BIOS-provided physical RAM map:
- BIOS-e820: 0000000000001000 - 00000000000a0000 (usable)
- BIOS-e820: 0000000000100000 - 0000000060000000 (usable)
-640MB HIGHMEM available.
- BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
- BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
- BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
- BIOS-e820: 0000000000100000 - 000000005fff0000 (usable)
- BIOS-e820: 000000005fff0000 - 000000005fff3000 (ACPI NVS)
- BIOS-e820: 000000005fff3000 - 0000000060000000 (ACPI data)
- BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
- BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
+639MB HIGHMEM available. 896MB LOWMEM available. -found SMP MP-table at 00000010 -Entering add_active_range(0, 0, 393216) 0 entries of 256 used +found SMP MP-table at 000f5650 +Entering add_active_range(0, 0, 393200) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376
- HighMem 229376 -> 393216
- HighMem 229376 -> 393200
early_node_map[1] active PFN ranges
- 0: 0 -> 393216
-On node 0 totalpages: 393216
- 0: 0 -> 393200
+On node 0 totalpages: 393200 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31
- HighMem zone: 1280 pages used for memmap
- HighMem zone: 162560 pages, LIFO batch:31
-DMI not present or invalid.
- HighMem zone: 1279 pages used for memmap
- HighMem zone: 162545 pages, LIFO batch:31
+DMI 2.3 present. +ACPI: RSDP 000F76C0, 0014 (r0 Nvidia) +ACPI: RSDT 5FFF3040, 0034 (r1 Nvidia AWRDACPI 42302E31 AWRD 0) +ACPI: FACP 5FFF30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0) +ACPI: DSDT 5FFF3180, 6264 (r1 NVIDIA AWRDACPI 1000 MSFT 100000E) +ACPI: FACS 5FFF0000, 0040 +ACPI: SRAT 5FFF9500, 0090 (r1 AMD HAMMER 1 AMD 1) +ACPI: MCFG 5FFF9600, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD 0) +ACPI: APIC 5FFF9440, 007C (r1 Nvidia AWRDACPI 42302E31 AWRD 0) Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override -Intel MultiProcessor Specification v1.4
- Virtual Wire compatibility mode.
-OEM ID: ASUS Product ID: A8NE APIC at: 0xFEE00000 +ACPI: PM-Timer IO Port: 0x4008 +ACPI: Local APIC address 0xfee00000 +ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:15 APIC version 16 -I/O APIC #1 Version 17 at 0xFC900000. +ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) +ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) +ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) +ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) +IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 +ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) +ACPI: BIOS IRQ0 pin2 override ignored. +ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) +ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) +ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) +ACPI: IRQ9 used by override. +ACPI: IRQ14 used by override. +ACPI: IRQ15 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs -Processors: 1 -Allocating PCI resources starting at 70000000 (gap: 60000000:a0000000) -Built 1 zonelists. Total pages: 390144 -Kernel command line: root=/dev/hda3 ro +Using ACPI (MADT) for SMP configuration information +Allocating PCI resources starting at 68000000 (gap: 60000000:80000000) +Built 1 zonelists. Total pages: 390129 +Kernel command line: root=/dev/hda3 ro mapped APIC to ffffd000 (fee00000) -mapped IOAPIC to ffffc000 (fc900000) +mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) -Detected 2211.367 MHz processor. +Detected 2211.369 MHz processor. spurious 8259A interrupt: IRQ7. Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) -Memory: 1550348k/1572864k available (1688k kernel code, 21364k reserved, 653k data, 244k init, 655360k highmem) +Memory: 1550220k/1572800k available (1688k kernel code, 21368k reserved, 653k data, 244k init, 655296k highmem) virtual kernel memory layout: fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) @@ -54,7 +80,7 @@ .data : 0xc02a62bf - 0xc03497e4 ( 653 kB) .text : 0xc0100000 - 0xc02a62bf (1688 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. -Calibrating delay using timer specific routine.. 4429.03 BogoMIPS (lpj=8858066) +Calibrating delay using timer specific routine.. 4425.47 BogoMIPS (lpj=8850948) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized @@ -70,50 +96,86 @@ SMP alternatives: switching to UP code Freeing SMP alternatives: 11k freed ACPI: Core revision 20070126 -ACPI Exception (tbxface-0618): AE_NO_ACPI_TABLES, While loading namespace from ACPI tables [20070126] -ACPI: Unable to load the System Description Tables CPU0: AMD Athlon(tm) 64 Processor 3500+ stepping 02 -Total of 1 processors activated (4429.03 BogoMIPS). +Total of 1 processors activated (4425.47 BogoMIPS). ENABLING IO-APIC IRQs -..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0 -..MP-BIOS bug: 8254 timer not connected to IO-APIC
Bad. Can we perform that work in LB?
-...trying to set up timer (IRQ0) through the 8259A ... -..... (found pin 0) ...works. +..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1 Brought up 1 CPUs Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 -PCI: Using configuration type 1 +ACPI: bus type pci registered +PCI: Using MMCONFIG +PCI: No mmconfig possible on device 00:18 Setting up standard PCI resources -ACPI: Interpreter disabled. -Linux Plug and Play Support v0.97 (c) Adam Belay -pnp: PnP ACPI: disabled -PnPBIOS: Scanning system for PnP BIOS support... -PnPBIOS: PnP BIOS support was not detected. -PCI: Probing PCI hardware +ACPI: Interpreter enabled +ACPI: (supports S0 S1 S3 S4 S5) +ACPI: Using IOAPIC for interrupt routing +ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: Transparent bridge - 0000:00:09.0 -PCI: Unable to handle 64-bit address space for bridge 0000:00:0b.0 -PCI: Unable to handle 64-bit address space for bridge 0000:00:0c.0 -PCI: Unable to handle 64-bit address space for bridge 0000:00:0d.0 -PCI: Unable to handle 64-bit address space for bridge 0000:00:0e.0
This is not 64bit space, but a ranges going backwards. Not keyboard related.
-PCI: Using IRQ router default [10de/005c] at 0000:00:09.0 -PCI->APIC IRQ transform: 0000:00:01.1[A] -> IRQ 10 -PCI->APIC IRQ transform: 0000:00:02.0[A] -> IRQ 21 -PCI->APIC IRQ transform: 0000:00:02.1[B] -> IRQ 20 -PCI->APIC IRQ transform: 0000:00:07.0[A] -> IRQ 23 -PCI->APIC IRQ transform: 0000:00:08.0[A] -> IRQ 22 -PCI->APIC IRQ transform: 0000:00:0a.0[A] -> IRQ 23 -PCI BIOS passed nonexistent PCI bus 1!
Must fix, but also not keyboard related.
-PCI: Cannot allocate resource region 5 of device 0000:00:01.1 +ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT] +ACPI: PCI Interrupt Routing Table [_SB_.PCI0.HUB0._PRT] +ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 7 9 10 11 12 14 15) +ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. +ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. +ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. +ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. +ACPI: PCI Interrupt Link [LUBA] (IRQs *3 4 5 7 9 10 11 12 14 15) +ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. +ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 *5 7 9 10 11 12 14 15) +ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 10 *11 12 14 15) +ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. +ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 7 9 10 11 12 14 15) +ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 *11 12 14 15) +ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. +ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15) +ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 *5 7 9 10 11 12 14 15) +ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. +ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0 +ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. +ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. +ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. +ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. +ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 +ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. +ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 +ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0 +ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. +ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 +ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 +ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. +ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 +ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 +ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. +Linux Plug and Play Support v0.97 (c) Adam Belay +pnp: PnP ACPI init +ACPI: bus type pnp registered +pnp: PnP ACPI: found 15 devices +ACPI: ACPI bus type pnp unregistered +PnPBIOS: Disabled by ACPI PNP +PCI: Using ACPI for IRQ routing +PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NET: Registered protocol family 8 NET: Registered protocol family 20 +ACPI: RTC can wake from S4 +pnp: 00:01: ioport range 0x4000-0x407f has been reserved +pnp: 00:01: ioport range 0x4080-0x40ff has been reserved +pnp: 00:01: ioport range 0x4400-0x447f has been reserved +pnp: 00:01: ioport range 0x4480-0x44ff has been reserved +pnp: 00:01: ioport range 0x4800-0x487f has been reserved +pnp: 00:01: ioport range 0x4880-0x48ff has been reserved +pnp: 00:0d: iomem range 0xe0000000-0xefffffff could not be reserved +pnp: 00:0e: iomem range 0xf0000-0xf3fff could not be reserved +pnp: 00:0e: iomem range 0xf4000-0xf7fff could not be reserved +pnp: 00:0e: iomem range 0xf8000-0xfbfff could not be reserved +pnp: 00:0e: iomem range 0xfc000-0xfffff could not be reserved +Time: tsc clocksource has been installed. PCI: Bridge: 0000:00:09.0 IO window: disabled.
- MEM window: fc000000-fc8fffff
- PREFETCH window: 70000000-700fffff
- MEM window: d0000000-d1ffffff
- PREFETCH window: 68000000-680fffff
PCI: Bridge: 0000:00:0b.0 IO window: disabled. -Time: tsc clocksource has been installed. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0c.0 @@ -142,7 +204,7 @@ checking if image is initramfs... it is Freeing initrd memory: 5286k freed audit: initializing netlink socket (disabled) -audit(1191006556.256:1): initialized +audit(1191006861.244:1): initialized highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) @@ -151,121 +213,149 @@ io scheduler deadline registered io scheduler cfq registered (default) PCI: Found disabled HT MSI Mapping on 0000:00:0b.0 -PCI: Found disabled HT MSI Mapping on 0000:00:00.0 -PCI: MSI quirk detected. MSI disabled on chipset 0000:00:0b.0.
Why not enable HT MSI?
+PCI: Found enabled HT MSI Mapping on 0000:00:00.0 +PCI: Linking AER extended capability on 0000:00:0b.0 PCI: Found disabled HT MSI Mapping on 0000:00:0c.0 -PCI: Found disabled HT MSI Mapping on 0000:00:00.0 -PCI: MSI quirk detected. MSI disabled on chipset 0000:00:0c.0. +PCI: Found enabled HT MSI Mapping on 0000:00:00.0 +PCI: Linking AER extended capability on 0000:00:0c.0 PCI: Found disabled HT MSI Mapping on 0000:00:0d.0 -PCI: Found disabled HT MSI Mapping on 0000:00:00.0 -PCI: MSI quirk detected. MSI disabled on chipset 0000:00:0d.0. +PCI: Found enabled HT MSI Mapping on 0000:00:00.0 +PCI: Linking AER extended capability on 0000:00:0d.0 PCI: Found disabled HT MSI Mapping on 0000:00:0e.0 -PCI: Found disabled HT MSI Mapping on 0000:00:00.0 -PCI: MSI quirk detected. MSI disabled on chipset 0000:00:0e.0. -Boot video device is 0000:01:06.0
Look at the boot video device.
+PCI: Found enabled HT MSI Mapping on 0000:00:00.0 +PCI: Linking AER extended capability on 0000:00:0e.0 +Boot video device is 0000:05:06.0
The bus numbering difference can probably be explained.
PCI: Setting latency timer of device 0000:00:0b.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0b.0:pcie00] +Allocate Port Service[0000:00:0b.0:pcie03] PCI: Setting latency timer of device 0000:00:0c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0c.0:pcie00] +Allocate Port Service[0000:00:0c.0:pcie03] PCI: Setting latency timer of device 0000:00:0d.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0d.0:pcie00] +Allocate Port Service[0000:00:0d.0:pcie03] PCI: Setting latency timer of device 0000:00:0e.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0e.0:pcie00] +Allocate Port Service[0000:00:0e.0:pcie03] isapnp: Scanning for PnP cards... +Switched to high resolution mode on CPU 0 isapnp: No Plug & Play device found Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A +00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize -PNP: No PS/2 controller found. Probing ports directly. -i8042.c: Can't read CTR while initializing i8042. -i8042: probe of i8042 failed with error -5
Now that one is really really bad. You could try to make sure port 0x60,0x64 irq 1 are used as default ports in probing.
+PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 +PNP: PS/2 controller doesn't have AUX irq; using default 12 +serio: i8042 KBD port at 0x60,0x64 irq 1 +serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode Freeing unused kernel memory: 244k freed -thermal: Unknown symbol acpi_processor_set_thermal_limit -Clocksource tsc unstable (delta = 504074564 ns) -Time: pit clocksource has been installed.
And that's the missing PM timer.
/proc/interrups /proc/ioports /proc/iomem would also be useful to compare.
Carl-Daniel