-----Original Message----- From: coreboot-bounces+joe=settoplinux.org@coreboot.org [mailto:coreboot- bounces+joe=settoplinux.org@coreboot.org] On Behalf Of Uwe Hermann Sent: Friday, May 16, 2008 4:50 PM To: Joseph Smith Cc: 'Stefan Reinauer'; coreboot@coreboot.org Subject: Re: [coreboot] v2[PATCH] Initial support for the Thomson IP1000
On Fri, May 16, 2008 at 03:49:39PM -0400, Joseph Smith wrote:
IRQ handler type mismatch for IRQ 6 current handler: uhci_hcd:usb3 [<c045abd0>] setup_irq+0x194/0x1ac [<c41ef2de>] floppy_hardint+0x0/0xd8 [floppy] [<c045ad82>] request_irq+0xc7/0xe5 [<c417d665>] init_module+0x536/0xe33 [floppy] [<c061bfb6>] cond_resched+0x26/0x31 [<c044917d>] __link_module+0x0/0x10 [<c044917d>] __link_module+0x0/0x10 [<c044a80f>] sys_init_module+0x1361/0x14a5 [<c04e812c>] blk_init_queue+0x0/0x8 [<c040518a>] syscall_call+0x7/0xb [<c0610000>] xfrm_send_policy_notify+0x35c/0x4fd ======================= floppy0: Unable to grab IRQ6 for the floppy driver
This doesn't look too good(?)
Not sure why this happens. You do disable floppy in Config.lb via "device pnp 2e.0 off" (but maybe the stuff between that line and the corresponding "end" has to be dropped? Not sure...
Yeh this started when I updated the kernel there is no floppy and it is disabled so not sure either... maybe a gpio setting?
Can you post 'superiotool -dV' from BIOS and coreboot for comparison?
Sure, will do.
Also, your PIRQ table is the same as for RCA RM4100, is that really the case? I.e. have you compared the getpir output of both?
It should be the same except as Corey said there is a PCI slot that
needs to
be added. Linux was never able to run on this box until now, so I don't really have any way to run getpir with the original bios.
Very nice! So for this box coreboot is not only an alternative to a vendor BIOS, it's the _only_ way to run Linux? Make sure to mention this in the wiki page.
Yes, the guys Set-Top-Linux are very excited about this! It originally comes with a proprietary bios that only boots a windows CE image (nk.bin). So yes, this is milestone for this box.
Thanks, Joseph Smith Set-Top-Linux www.settoplinux.org