yes, it is looking at address 0xfe000000, not at your bios image. Are you talking about onboard graphics or a pci expansion card now?
This board has a cs5530 southbridge, this bridge has an internal graphic engine, but this item is not used.
Also the board has a cyberpro 5000 graphic (onboard) chip located on the PCI BUS There a two onboard graphic engines, one is used the other isn't
It is possible, that the kalhua cs5530 graphic chip is normally used for a LVDS connector, but this board revision doesn't have this connector and also a few other items like resistors and so on. I will try that later :D
In which case?
In the wiki text.
what lines?
device pci 9.0 on driver .....
end
If your linuxbios image is 256kbyte and your graphics bios image is at the very beginning of the linuxbios image, the address is 0xfffc0000. If your LinuxBIOS image is 512k the address would be 0xfff80000. And so on.
shit I have had a few tests, always with the wrong addresses I will try this.
chris
Stefan