Hello Mike,
thank you for the verbose anwser, as always.
The board is not in my possession yet.
I ordered it as upgrade for my Fileserver.
I will investigate it, after i have it up running.
Kinky greetings.
Am 25.05.19 um 10:15 schrieb Mike Banon:
ASUS KGPE-D16 is using a "microcode update infrastructure" ( which IMHO has some shortcomings, hopefully this will be discussed here - [1] ) which extracts a microcode from a container - and I haven't checked yet if my recently merged "15h microcodes" patch 28273 ([2]) brings any benefit for your board , since this "microcode update infrastructure" might replace this new microcode hardcoded into C file by an older version extracted later from a binary container. If this really happens, we could either wait for a new container released by AMD at linux-firmware.git , or if it takes too long - I could try to make such a container by myself, looking at how a current container is done, and submit for a review.
Please, could you run " cat /proc/cpuinfo | grep microcode " command and tell its' output? Hope it gives "microcode : 0x600111f".
[1] - https://review.coreboot.org/c/coreboot/+/29272/2#message-771016d7aa4633189e2...
[2] - https://review.coreboot.org/c/coreboot/+/28273/6#message-cbbdcce72362a39ad3e...
Best regards, Mike Banon
On Fri, May 24, 2019 at 11:04 PM Kinky Nekoboi kinky_nekoboi@nekoboi.moe wrote:
Hello fellow corebooters,
i have succesfully build an rom for the asus kgpe-d16, with microcode (FAM15h) enabled.
Does anybody has experience with this systemboard.
Is the current included ucode working with Opteron 63XX processors?
best regards _______________________________________________ coreboot mailing list -- coreboot@coreboot.org To unsubscribe send an email to coreboot-leave@coreboot.org
coreboot mailing list -- coreboot@coreboot.org To unsubscribe send an email to coreboot-leave@coreboot.org