I followed this howto: http://www.linuxbios.org/developer/portguides/M810LR/ but used the config for the m758lmr+
I am running debian woody and I used 2.4.19 for the kernel. It looked like it flashed the diskonchip ok, here is the output: rmmod: module docprobe is not loaded rmmod: module doc2001 is not loaded rmmod: module docecc is not loaded 16+1 records in 17+0 records out 0+1 records in 1+0 records out Erase Total 1024 Units 1+0 records in 1+0 records out 1+0 records in 1+0 records out 126+0 records in 126+0 records out 2176+0 records in 2176+0 records out docecc: Device or resource busy
The modules weren't unloaded though - here is lsmod: Module Size Used by Not tainted doc2000 10756 0 (autoclean) nand_ids 920 0 [doc2000] mtdcore 2592 1 [doc2000] docecc 3680 0 [doc2000]
So I rebooted and nothing. I connected a serial cable and nothing. Any ideas for me? Perhaps I am not using minicom correctly? I set it to use /dev/ttyS0 with 115200 8N1 do I need to do anything else?
Sorry for the beginner questions - please educate me! -DS