After make the linuxbios rom i have this problem, the machine is look on boot, and this is the log of the serial port.
PCI devices initialized Enabled in SIS 503 regs 0x40 and 0x45 handle_superio start, s 0000b040 nsuperio 1 s->super 0000b318 handle_superio Pass 1, check #0, s 0000b040 s->super 0000b318 handle_superio: Pass 1, Superio SiS 950 handle_superio port 0x2e, defaultport 0x2e handle_superio Using port 0x2e handle_superio Pass 1, done #0 handle_superio done PCCHIPS M810LMR (and similar)...Entering the initregs process Southbridge fixup done for SIS 503 handle_superio start, s 0000b040 nsuperio 1 s->super 0000b318 handle_superio Pass 2, check #0, s 0000b040 s->super 0000b318 handle_superio: Pass 2, Superio SiS 950 handle_superio port 0x2e, defaultport 0x2e handle_superio Using port 0x2e Call finishup handle_superio Pass 2, done #0 handle_superio done Copying IRQ routing tables to 0xf0000...done. Wrote linuxbios table at: 00000500 - 0000066c checksum ba14
Welcome to elfboot, the open sourced starter. January 2002, Eric Biederman. Version 1.2
37:init_bytes() - zkernel_start:0xfffc0000 zkernel_mask:0x0000ffff Found ELF candiate at offset 0 New segment addr 0x400000 size 0xcba0 offset 0x60 filesize 0x8789 (cleaned up) New segment addr 0x400000 size 0xcba0 offset 0x60 filesize 0x8789 Loading Segment: addr: 0x0000000000400000 memsz: 0x000000000000cba0 filesz: 0x0000000000008789 Clearing Segment: addr: 0x0000000000408789 memsz: 0x0000000000004417 Jumping to boot code ROM segment 0x0000 length 0x0000 reloc 0x0000 Etherboot 5.0.6 (GPL) ELF for [SIS900] Boot from (N)etwork or from (L)ocal? clocks_per_tick = 784576 N I am now initializing the ide system init_drive sectors_per_track = [0], num_heads = [0],num_cylinders=[0], num_sectors = [0] CHS mode...
Boot: (hd0,0)/kernel
The machine is stalled with this messagges.
Tnx Serafino