Re: [coreboot] [PATCH] superiotool: Add register dump map for NSC PC8739x

[Corey Osgood]

2008/12/20 Michał Mirosław
> This adds register map based on NSC PC87392 datasheet. LDN#2 can be
> used for a SIR/FIR device.
>
> Signed-off-by: Michał Mirosław 
> Acked-by: Ulf Jordan

Thanks, r3827

-Corey
> Index: util/superiotool/nsc.c
>
> --- util/superiotool/nsc.c      (wersja 3825)
> +++ util/superiotool/nsc.c      (kopia robocza)
> @@ -308,6 +308,42 @@
>    /* SID[7..0]: family, SRID[7..5]: ID, SRID[4..0]: rev. */
>    {0xea, "PC8739x", {
>           {NOLDN, NULL,
>                   {0x20,0x21,0x22,0x23,0x24,0x25,0x26,0x27,0x28,0x29,
>                    0x2a,0x2b,0x2c,0x2d,0x2e,0x2f,EOT},
>                   {0xea,0x11,MISC,MISC,MISC,0x80,0x00,NANA,0x00,MISC,
>                    0x37,RSVD,RSVD,RSVD,RSVD,RSVD,EOT}},
>           {0x0, "Floppy",
>                   {0x30,0x60,0x61,0x70,0x71,0x74,0x75,0xf0,0xf1,EOT},
>
> {0x00,0x03,0xf2,0x06,0x03,0x02,0x04,0x24,0x00,EOT}},
>           {0x1, "Parallel port",
>                   {0x30,0x60,0x61,0x70,0x71,0x74,0x75,0xf0,EOT},
>                   {0x00,0x02,0x78,0x07,0x02,0x04,0x04,0xf2,EOT}},
>           {0x2, "COM2 / FIR",
>                   {0x30,0x60,0x61,0x70,0x71,0x74,0x75,0xf0,EOT},
>                   {0x00,0x02,0xf8,0x03,0x03,0x04,0x04,0x02,EOT}},
>           {0x3, "COM1",
>                   {0x30,0x60,0x61,0x70,0x71,0x74,0x75,0xf0,EOT},
>                   {0x00,0x03,0xf8,0x04,0x03,0x04,0x04,0x02,EOT}},
>           {0x7, "GPIO",
>                   {0x30,0x60,0x61,0x70,0x71,0x74,0x75,0xf0,0xf1,0xf2,
>                    EOT},
>                   {0x00,0x00,0x00,0x00,0x03,0x04,0x04,0x00,0x44,0x01,
>                    EOT}},
>           {0xa, "Watchdog timer (WDT)",
>                   {0x30,0x60,0x61,0x70,0x71,0x74,0x75,0xf0,EOT},
>                   {0x00,0x00,0x00,0x00,0x03,0x04,0x04,0x02,EOT}},
>           {0xb, "Game port",
>                   {0x30,0x60,0x61,0x70,0x71,0x74,0x75,0xf0,EOT},
>                   {0x00,0x02,0x01,0x00,0x03,0x04,0x04,0x00,EOT}},
>           {0xc, "MIDI port",
>                   {0x30,0x60,0x61,0x70,0x71,0x74,0x75,0xf0,EOT},
>                   {0x00,0x03,0x30,0x00,0x03,0x04,0x04,0x00,EOT}},
>           {0xf, "X-Bus",
>                   {0x30,0x60,0x61,0x70,0x71,0x74,0x75,0xf0,0xf1,0xf2,
>                    0xf3,0xf4,0xf5,0xf6,0xf7,0xf8,0xf9,EOT},
>                   {0x00,0x00,0x00,0x00,0x00,0x04,0x04,0x00,0x00,0x00,
>                    0x00,0x00,0x00,0x00,0x00,0x00,0x00,EOT}},
>          {EOT}}},
>  {0xec, "PC87591x", {
>          /* SRID[7..5]: 000=PC87591E, 001=PC87591S, 100=PC87591L */