[forwarding to the mailing list]
On Tue, Jul 15, 2008 at 09:20:47PM +0200, Hannes Hegewald wrote:
Hey, I applied the patch, built a new 2.6.26 kernel an ran getpir again. Two things changed: /* IRQs devoted exclusively to PCI usage */ and the /* u8 checksum. The new file is attached. I also have already tried the new irq_tables.c file by placing it in src/mainboard/asi/mb_5blgp and running the ./buildtarget script again. unfortunately nothing changed.
Thanks, Hannes
/* This file was generated by getpir.c, do not modify!
- (but if you do, please run checkpir on it to verify)
- Contains the IRQ Routing Table dumped directly from your
- memory, which BIOS sets up.
- Documentation at: http://www.microsoft.com/whdc/archive/pciirq.mspx
*/
#ifdef GETPIR #include "pirq_routing.h" #else #include <arch/pirq_routing.h> #endif
const struct irq_routing_table intel_irq_routing_table = { PIRQ_SIGNATURE, /* u32 signature */ PIRQ_VERSION, /* u16 version */ 32+16*3, /* There can be total 3 devices on the bus */ 0x00, /* Where the interrupt router lies (bus) */ (0x12<<3)|0x0, /* Where the interrupt router lies (dev) */ 0x8c00, /* IRQs devoted exclusively to PCI usage */ 0x1078, /* Vendor */ 0x2, /* Device */ 0, /* Crap (miniport) */ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ 0x92, /* u8 checksum. This has to be set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ { /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ {0x00,(0x07<<3)|0x0, {{0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x04, 0xdeb8}, {0x01, 0x0deb8}}, 0x1, 0x0}, {0x00,(0x0f<<3)|0x0, {{0x03, 0xdeb8}, {0x04, 0xdeb8}, {0x01, 0xdeb8}, {0x02, 0x0deb8}}, 0x2, 0x0}, {0x00,(0x13<<3)|0x0, {{0x01, 0xdeb8}, {0x00, 0xdeb8}, {0x00, 0xdeb8}, {0x00, 0x0deb8}}, 0x0, 0x0}, } };
unsigned long write_pirq_routing_table(unsigned long addr) { return copy_pirq_routing_table(addr); }
Uwe.