Do most normal motherboards supply +5V on pin 7 of their SATA connectors to make this work?
Are you using them on an off-the-shelf motherboard?
This looks like something intended for an embedded design, where you make your connector a non-standard pinout to support it.
On Mon, Jan 12, 2009 at 4:03 PM, Dan Lykowski engineerguy3737@yahoo.com wrote:
I would suggest this part: http://www.innodisk.com/flashstorage_specification.jsp?flashid=29 They plug right in to the SATA port. They have a minor quirk where you have to 'force.libata=1:1.5g' to get them to work under Linux but that is the only negative I have run across so far.
Dan Lykowski
--- On Mon, 1/12/09, Peter Stuge peter@stuge.se wrote:
From: Peter Stuge peter@stuge.se Subject: Re: [coreboot] SCALE To: coreboot@coreboot.org Date: Monday, January 12, 2009, 2:55 PM
-----Inline Attachment Follows-----
ron minnich wrote:
I'd like to have the 5 second "boot to X" demo at the table. If somebody can help direct me to getting that set up, I'd appreciate it.
If you don't want to cram everything into a 16Mbit flash chip, which could be tight, you need some ATA flash to store apps on.
Since the dbm690 has an LPC PLCC socket you can use the dongle and my adapter plug though, that way you have 32Mbit which is already more roomy.
Maybe the dongle occupied for the ALIX already?
//Peter
-- coreboot mailing list: coreboot@coreboot.org http://www.coreboot.org/mailman/listinfo/coreboot
-- coreboot mailing list: coreboot@coreboot.org http://www.coreboot.org/mailman/listinfo/coreboot