Re: [coreboot] Checking support for Anaheim2A motherboard

[Corey Osgood]

On Sat, Feb 23, 2008 at 1:59 PM, Ken Chiang  wrote:
> Hello,
> I new to the list and would like to contribute to this
> project if possible.  To get things started, I am
> wondering if the motherboard specified below is
> currently supported?
>
> Thanks!

Not completely. The northbridge and southbridge are supported, the Super IO
is not, but it may be similar to other ite Super IOs, and serial console
should work. The motherboard isn't supported yet, but that should be as
simple as copying the asus/mew-am stuff, modifying any config options, and
creating your own pirq tables. Also note that onboard video doesn't
currently work, but a PCI/AGP video card should.

-Corey

================specs==================
> CPU:  Intel Celeron 533Mhz
> northbridge: Intel 82810
> southbridge: Intel 82801AA
> mainboard: Anaheim2A
> BIOs chip: ANA 2A (EM) v.1.03
>
> lspci output:
> 00:00.0 Host bridge: Intel Corporation 82810 GMCH
> [Graphics Memory Controller Hub] (rev 03)
> 00:01.0 VGA compatible controller: Intel Corporation
> 82810 CGC [Chipset Graphics Controller] (rev 03)
> 00:1e.0 PCI bridge: Intel Corporation 82801AA PCI
> Bridge (rev 02)
> 00:1f.0 ISA bridge: Intel Corporation 82801AA ISA
> Bridge (LPC) (rev 02)
> 00:1f.1 IDE interface: Intel Corporation 82801AA IDE
> (rev 02)
> 00:1f.2 USB Controller: Intel Corporation 82801AA USB
> (rev 02)
> 00:1f.3 SMBus: Intel Corporation 82801AA SMBus (rev
> 02)
> 01:09.0 Multimedia audio controller: Cirrus Logic
> Crystal CS4281 PCI Audio (rev 01)
> 01:0b.0 Ethernet controller: D-Link System Inc RTL8139
> Ethernet (rev 10)
> 01:0d.0 USB Controller: NEC Corporation USB (rev 41)
> 01:0d.1 USB Controller: NEC Corporation USB (rev 41)
> 01:0d.2 USB Controller: NEC Corporation USB 2.0 (rev
> 02)
> 01:0e.0 Communication controller: Conexant HSF 56k
> Data/Fax Modem (rev 01)
>
> superio chip:  model number on actual chip  ITE
> IT8702F-A
> superiotool output:
> superiotool r
> Found ITE IT8702F (id=0x8702, rev=0x3) at 0x2e
> No dump available for this Super I/O
>
> Type of BIOS device: soldered PLCC
>
> Looking for last minute shopping deals?
> Find them fast with Yahoo! Search.
> http://tools.search.yahoo.com/newsearch/category.php?category=shopping