Ok, tonight I'll send you a ready-to-burn image, and please, if you burn it with bios savior, try to write your experience. I've had a lot of problems using it, and finally, i'm using two flash I get from a local distributor (for free :D), but biosSavior is not working.
Sounds interessting, I want a simialr thing (for private) but didn't start for now.. I bought This Bios-Savior now, - can you provide me a bootable "ready ROM" for a quick test?
Regards, -Ingo
-----Ursprüngliche Nachricht----- Von: Ignacio Verona [mailto:nacho@estudio-verona.com] Gesendet: Montag, 17. Mai 2004 13:05 An: Baab, Ingo Cc: linuxbios@clustermatic.org Betreff: AW: LinuxBios now working on Epia MII-10000
Ingo: I've been working on linuxbios for 2 weeks or so (Delayed by BiosSavior not working properly :( ) and what I have now is (as I've said in subject, Epia mII-10000 but I think almost everything should work on epia-m as well):
LinuxBios booting, from hw detection to linux login on serial console, with on-board ethernet. I haven't tested sound so far, my main goal was to boot with linuxbios.
what I do not have is: VGA working (It seems to detect, but monitor doesn't show anything). PCMCIA/CF slot. If I boot with them on board linuxbios will reboot forever.
More about car-pc: Is my final course proyect, and I will do an interface for controlling mp3/video playing, maybe a modification to GiantDisc, but I'm still not sure.
If u want to know anything else, please, let me know.
Hello Ignacio, I want to start also a in-car-project, can you inform me about the state of your project? How far are you, what is working ;))? Thank You, -Ingo from Germany
-----Urspr¨¹ngliche Nachricht----- Von: Ignacio Verona [mailto:nacho@estudio-verona.com] Gesendet: Samstag, 15. Mai 2004 17:10 An: linuxbios@clustermatic.org Betreff: LinuxBios now working on Epia MII-10000
At least, I've linuxbios booting my kernel with filo. Now I've a few questions:
- When booting, it stops about 2 o 3 secs on "Jumping to entry point".
Is this normal? Can't I reduce this time? (My main purpouse of using LB is for getting as small boot time as possible for my in-car PC)
- Can I get acpi to work on Epia? I mean, halt and power-off the
system?
thanks!! _______________________________________________ Linuxbios mailing list Linuxbios@clustermatic.org http://www.clustermatic.org/mailman/listinfo/linuxbios
Diese E-Mail enthaelt vertrauliche und/oder rechtlich geschuetzte Informationen. Wenn Sie nicht der richtige Adressat sind oder diese E-Mail irrtuemlich erhalten haben, informieren Sie bitte sofort den Absender und loeschen Sie diese Mail. Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieser Mail ist nicht gestattet.
This e-mail may contain confidential and/or privileged information. If you are not the intended recipient (or have received this e-mail in error)
please notify the sender immediately and delete this e-mail. Any unauthorized copying, disclosure or distribution of the contents in this e-mail is strictly forbidden.
Diese E-Mail enthaelt vertrauliche und/oder rechtlich geschuetzte Informationen. Wenn Sie nicht der richtige Adressat sind oder diese E-Mail irrtuemlich erhalten haben, informieren Sie bitte sofort den Absender und loeschen Sie diese Mail. Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieser Mail ist nicht gestattet.
This e-mail may contain confidential and/or privileged information. If you are not the intended recipient (or have received this e-mail in error) please notify the sender immediately and delete this e-mail. Any unauthorized copying, disclosure or distribution of the contents in this e-mail is strictly forbidden.