I don't know if I'm stupid or what, but it just won't work for me :(
First of. I can't have my harddisk connected as hdb1 and my cdrom as hda1, ( which is out of the box for my setup ) because the IDE-disk will not be recognized by LB if its secondary. ( ??? )
So I put the hd as hda1 and create my LinuxBIOS as follows:
Get a proper vga-bios
# dd if=/dev/mem of=video.bios.bin bs=1 count=65536 skip=786432
Get the filo-0.5 change Config
Remove grub stuff set AUTOBOOT_FILE = "hda1:/vmlinuz.elf"
make copy filo.elf to /
# svn co svn://openbios.org/repos/trunk/LinuxBIOSv2 # cd LinuxBIOSv2/targets # ./buildtarget via/epia-m # cd via/epia-m/epia-m/ # vi Makefile
edit so video.bios.bin is cat'ed before linuxbios.rom
# make
create a kernel/initrd with
# mkelfImage --kernel=/vmlinuz-2.6.16-1.2111_FC5 \ --output=/vmlinuz.elf \ --initrd=/initrd-2.6.16-1.2111_FC5.img \ --command-line="ro root=LABEL=/ rhgb quiet console=tty0 console=ttyS0,115200"
flash the BIOS verify the BIOS
repeat above until verify
reboot
logged startup follows:
---8<--------------------------------------------------------------
0
LinuxBIOS-1.1.8.0Fallback Wed May 31 13:15:25 CEST 2006 starting... Enabling mainboard devices Enabling shadow ram vt8623 init starting Detecting Memory Number of Banks 04 Number of Rows 0d Priamry DRAM width08 No Columns 0a MA type e0 Bank 0 (*16 Mb) 10 No Physical Banks 02 Total Memory (*16 Mb) 20 CAS Supported 2 2.5 Cycle time at CL X (nS)75 Cycle time at CL X-0.5 (nS)a0 Cycle time at CL X-1 (nS)00 Starting at CAS 2.5 tRP 50 tRCD 50 tRAS 30 Low Bond 04 High Bondd7 Setting DQS delay90vt8623 done 00:06 11 23 31 06 00 30 22 00 00 00 06 00 00 00 00 10:08 00 00 d0 00 00 00 00 00 00 00 00 00 00 00 00 20:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30:00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00 40:00 18 88 80 82 44 00 00 18 99 88 80 82 44 00 00 50:c8 de cf 88 e0 07 00 00 e0 00 10 20 20 20 00 00 60:02 ff 00 30 e6 32 01 20 42 2d 43 58 84 55 00 00 70:82 48 00 01 01 08 50 00 01 00 00 00 00 00 02 12 80:0f 64 00 00 80 00 00 00 02 00 00 00 00 00 00 00 90:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0:02 c0 20 00 07 02 00 1f 04 00 00 00 2f 02 04 00 b0:00 00 00 00 c0 00 00 00 c8 00 00 04 00 00 00 00 c0:01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 d0:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0:00 dd 00 01 00 00 01 00 40 00 00 00 00 00 00 00 f0:00 00 00 00 00 00 12 13 00 00 00 00 00 00 00 00 AGP Doing MTRR init. Copying LinuxBIOS to ram. Jumping to LinuxBIOS. LinuxBIOS-1.1.8.0Fallback Wed May 31 13:44:49 CEST 2006 booting... clocks_per_usec: 2412 Enumerating buses... Finding PCI configuration type. PCI: Using configuration type 1 PCI_DOMAIN: 0000 enabled APIC_CLUSTER: 0 enabled PCI: pci_scan_bus for bus 0 PCI: 00:00.0 [1106/3123] enabled PCI: 00:01.0 [1106/b091] enabled PCI: 00:0a.0 [1180/0476] enabled PCI: 00:0a.1 [1180/0476] enabled PCI: 00:0d.0 [1106/3044] enabled In vt8235_enable 1106 3038. PCI: 00:10.0 [1106/3038] enabled In vt8235_enable 1106 3038. PCI: 00:10.1 [1106/3038] enabled In vt8235_enable 1106 3038. PCI: 00:10.2 [1106/3038] enabled In vt8235_enable 1106 3104. PCI: 00:10.3 [1106/3104] enabled In vt8235_enable 1106 3177. Initialising Devices PCI: 00:11.0 [1106/3177] enabled In vt8235_enable 1106 0571. PCI: 00:11.1 [1106/0571] enabled In vt8235_enable 1106 3059. PCI: 00:11.5 [1106/3059] enabled In vt8235_enable ffff ffff. In vt8235_enable 1106 3065. PCI: 00:12.0 [1106/3065] enabled PCI: pci_scan_bus for bus 1 PCI: 01:00.0 [1106/3122] enabled PCI: pci_scan_bus returning with max=01 PCI: pci_scan_bus for bus 2 PCI: pci_scan_bus returning with max=02 PCI: pci_scan_bus for bus 3 PCI: pci_scan_bus returning with max=03 vt1211 enabling PNP devices. PNP: 002e.0 enabled vt1211 enabling PNP devices. PNP: 002e.1 enabled vt1211 enabling PNP devices. PNP: 002e.2 enabled vt1211 enabling PNP devices. PNP: 002e.3 enabled vt1211 enabling PNP devices. PNP: 002e.b enabled PCI: pci_scan_bus returning with max=03 done Allocating resources... Reading resources... Done reading resources. Setting resources... I would set ram size to 0x80000 Kbytes PCI: 00:0a.0 In set resources PCI: 00:0a.0 10 <- [0x00febfa000 - 0x00febfafff] mem PCI: 00:0a.0 2c <- [0x00000018f0 - 0x00000028ef] io PCI: 00:0a.0 34 <- [0x00000028f0 - 0x00000038ef] io PCI: 00:0a.0 1c <- [0x00f6bfa000 - 0x00f8bf9fff] prefmem PCI: 00:0a.0 24 <- [0x00f8bfa000 - 0x00fabf9fff] mem PCI: 00:0a.1 In set resources PCI: 00:0a.1 1 ==> febfb000 PCI: 00:0a.1 10 <- [0x00febfc000 - 0x00febfcfff] mem PCI: 00:0a.1 2c <- [0x00000038f0 - 0x00000048ef] io PCI: 00:0a.1 34 <- [0x00000048f0 - 0x00000058ef] io PCI: 00:0a.1 1c <- [0x00fabfa000 - 0x00fcbf9fff] prefmem PCI: 00:0a.1 24 <- [0x00fcbfa000 - 0x00febf9fff] mem PCI: 00:0d.0 10 <- [0x00febfd000 - 0x00febfd7ff] mem PCI: 00:0d.0 14 <- [0x0000001800 - 0x000000187f] io PCI: 00:10.0 20 <- [0x0000001880 - 0x000000189f] io PCI: 00:10.1 20 <- [0x00000018a0 - 0x00000018bf] io PCI: 00:10.2 20 <- [0x00000018c0 - 0x00000018df] io PCI: 00:10.3 10 <- [0x00febfe000 - 0x00febfe0ff] mem PNP: 002e.0 60 <- [0x00000003f0 - 0x00000003f7] io PNP: 002e.0 70 <- [0x0000000006 - 0x0000000006] irq PNP: 002e.0 74 <- [0x0000000002 - 0x0000000002] drq PNP: 002e.1 60 <- [0x0000000378 - 0x000000037f] io PNP: 002e.1 70 <- [0x0000000007 - 0x0000000007] irq PNP: 002e.1 74 <- [0x0000000003 - 0x0000000003] drq PNP: 002e.2 60 <- [0x00000003f8 - 0x00000003ff] io PNP: 002e.2 70 <- [0x0000000004 - 0x0000000004] irq PNP: 002e.3 60 <- [0x00000002f8 - 0x00000002ff] io PNP: 002e.3 70 <- [0x0000000003 - 0x0000000003] irq PNP: 002e.b 60 <- [0x000000ec00 - 0x000000ecff] io PCI: 00:11.1 20 <- [0x00000018e0 - 0x00000018ef] io PCI: 00:11.5 10 <- [0x0000001000 - 0x00000010ff] io PCI: 00:12.0 10 <- [0x0000001400 - 0x00000014ff] io PCI: 00:12.0 14 <- [0x00febff000 - 0x00febff0ff] mem Done setting resources. Done allocating resources. Enabling resources... PCI: 00:00.0 cmd <- 146 PCI: 00:01.0 bridge ctrl <- 000f PCI: 00:01.0 cmd <- 147 PCI: 01:00.0 cmd <- 140 PCI: 00:0a.0 bridge ctrl <- 0503 PCI: 00:0a.0 cmd <- 143 PCI: 00:0a.1 bridge ctrl <- 0503 PCI: 00:0a.1 cmd <- 143 PCI: 00:0d.0 cmd <- 1c3 PCI: 00:10.0 subsystem <- 00/00 PCI: 00:10.0 cmd <- 141 PCI: 00:10.1 subsystem <- 00/00 PCI: 00:10.1 cmd <- 141 PCI: 00:10.2 subsystem <- 00/00 PCI: 00:10.2 cmd <- 141 PCI: 00:10.3 subsystem <- 00/00 PCI: 00:10.3 cmd <- 142 PCI: 00:11.0 cmd <- 147 PNP: 002e.0 - enabling PNP: 002e.1 - enabling PNP: 002e.2 - enabling PNP: 002e.3 - enabling PNP: 002e.b - enabling PCI: 00:11.1 cmd <- 147 PCI: 00:11.5 subsystem <- 00/00 PCI: 00:11.5 cmd <- 141 PCI: 00:12.0 cmd <- 1c3 done. Initializing devices... Root Device init PCI: 00:10.0 init PCI: 00:10.1 init PCI: 00:10.2 init PCI: 00:10.3 init PCI: 00:11.0 init vt8235 init RTC Init Invalid CMOS LB checksum pci_routing_fixup: dev is 000102a0 setting firewire Assigning IRQ 9 to 0:d.0 Readback = 9 setting usb Assigning IRQ 5 to 0:10.0 Readback = 5 pci_level_irq: lower order bits are wrong: want 0x0, got 0x20 Assigning IRQ 9 to 0:10.1 Readback = 9 pci_level_irq: lower order bits are wrong: want 0x0, got 0x20 Assigning IRQ 9 to 0:10.2 Readback = 9 pci_level_irq: lower order bits are wrong: want 0x0, got 0x20 Assigning IRQ 5 to 0:10.3 Readback = 5 pci_level_irq: lower order bits are wrong: want 0x0, got 0x20 setting vt8235 Assigning IRQ 5 to 0:11.1 Readback = 5 pci_level_irq: lower order bits are wrong: want 0x0, got 0x20 Assigning IRQ 9 to 0:11.5 Readback = 9 pci_level_irq: lower order bits are wrong: want 0x0, got 0x20 setting ethernet Assigning IRQ 5 to 0:12.0 Readback = 5 pci_level_irq: lower order bits are wrong: want 0x0, got 0x20 setting vga Assigning IRQ 5 to 1:0.0 Readback = 5 pci_level_irq: lower order bits are wrong: want 0x0, got 0x20 setting pci slot setting cardbus slot Assigning IRQ 5 to 0:a.0 Readback = 5 pci_level_irq: lower order bits are wrong: want 0x0, got 0x20 Assigning IRQ 5 to 0:a.1 Readback = 5 pci_level_irq: lower order bits are wrong: want 0x0, got 0x20 setting riser slot PNP: 002e.0 init PNP: 002e.1 init PNP: 002e.2 init PNP: 002e.3 init PNP: 002e.b init PCI: 00:11.1 init Enabling VIA IDE. ide_init: enabling compatibility IDE addresses enables in reg 0x42 0x0 enables in reg 0x42 read back as 0x0 enables in reg 0x40 0x13 enables in reg 0x40 read back as 0x13 enables in reg 0x9 0x8a enables in reg 0x9 read back as 0x8a command in reg 0x4 0x7 command in reg 0x4 reads back as 0x7 PCI: 00:11.5 init PCI: 00:12.0 init Configuring VIA Rhine LAN PCI: 00:0a.0 init rl5c476 init CF Base = febfb000 PCI: 00:0a.1 init rl5c476 init CF Base = febfb000 CF Config = ff APIC_CLUSTER: 0 init Initializing CPU #0 CPU: vendor Centaur device 698 Enabling cache
Setting fixed MTRRs(0-88) type: UC Setting fixed MTRRs(0-16) Type: WB Setting fixed MTRRs(24-88) Type: WB DONE fixed MTRRs Setting variable MTRR 0, base: 0MB, range: 256MB, type WB Setting variable MTRR 1, base: 256MB, range: 128MB, type WB Setting variable MTRR 2, base: 384MB, range: 64MB, type WB Setting variable MTRR 3, base: 448MB, range: 32MB, type WB DONE variable MTRRs Clear out the extra MTRR's
MTRR check Fixed MTRRs : Enabled Variable MTRRs: Enabled
Disabling local apic...done. CPU #0 Initialized PCI: 00:00.0 init VT8623 random fixup ... Frame buffer at d0000000 PCI: 00:01.0 init VT8623 AGP random fixup ... PCI: 00:0d.0 init PCI: 01:00.0 init VGA random fixup ... INSTALL REAL-MODE IDT DO THE VGA BIOS found VGA: vid=1106, did=3122 rom base, size: fffc0000 write_protect_vgabios bus/devfn = 0x100 biosint: INT# 0x15 biosint: eax 0x5f00 ebx 0x187d4 ecx 0x17fa0 edx 0xa biosint: ebp 0x17f70 esp 0xff2 edi 0xed30 esi 0x187d4 biosint: ip 0x641c cs 0xc000 flags 0x46 biosint: INT# 0x1a biosint: eax 0xb108 ebx 0x10000 ecx 0x10000 edx 0x3d5 biosint: ebp 0x17f70 esp 0xfcc edi 0xf6 esi 0x1c01b biosint: ip 0x40f0 cs 0xc000 flags 0x46 0xb108: bus 0 devfn 0x0 reg 0xf6 val 0x12 biosint: INT# 0x15 biosint: eax 0x5f02 ebx 0x187d4 ecx 0x7f01 edx 0x3d5 biosint: ebp 0x17f70 esp 0xfdc edi 0x44 esi 0x1c01b biosint: ip 0x6468 cs 0xc000 flags 0x46 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0x10c01 ecx 0x401 edx 0x112 biosint: ebp 0x17f70 esp 0xfa4 edi 0x44 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x46 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0x10c01 ecx 0x401 edx 0x112 biosint: ebp 0x17f70 esp 0xfa4 edi 0x44 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x46 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0x10c01 ecx 0x401 edx 0x112 biosint: ebp 0x17f70 esp 0xf92 edi 0x44 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x46 biosint: INT# 0x15 biosint: eax 0x5f02 ebx 0x10002 ecx 0x401 edx 0x0 biosint: ebp 0x17f70 esp 0xfb8 edi 0x44 esi 0x1c01b biosint: ip 0x6468 cs 0xc000 flags 0x46 biosint: INT# 0x15 biosint: eax 0x5f02 ebx 0x10002 ecx 0x401 edx 0x0 biosint: ebp 0x17f70 esp 0xfb8 edi 0x44 esi 0x1c01b biosint: ip 0x6468 cs 0xc000 flags 0x46 biosint: INT# 0x15 biosint: eax 0x5f02 ebx 0x10002 ecx 0x401 edx 0x0 biosint: ebp 0x17f70 esp 0xfb8 edi 0x44 esi 0x1c01b biosint: ip 0x6468 cs 0xc000 flags 0x46 biosint: INT# 0x15 biosint: eax 0x5f0f ebx 0x187d4 ecx 0x7fa0 edx 0x3d5 biosint: ebp 0x17f70 esp 0xfee edi 0x44 esi 0x187d4 biosint: ip 0x651b cs 0xc000 flags 0x6 biosint: INT# 0x15 biosint: eax 0x5f02 ebx 0x187d4 ecx 0x7f01 edx 0x3d5 biosint: ebp 0x17f70 esp 0xfdc edi 0x44 esi 0x187d4 biosint: ip 0x6468 cs 0xc000 flags 0x46 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0x10c01 ecx 0x700 edx 0x112 biosint: ebp 0x10fca esp 0xf8e edi 0xac51 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x46 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0x10c01 ecx 0x700 edx 0x112 biosint: ebp 0x10fca esp 0xf7e edi 0xb880 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x246 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0x10c01 ecx 0x101 edx 0x112 biosint: ebp 0x10fca esp 0xf7e edi 0xb880 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x246 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0x10c01 ecx 0x7a0 edx 0x112 biosint: ebp 0x10fca esp 0xf88 edi 0xb880 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x246 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0x10c01 ecx 0x700 edx 0x112 biosint: ebp 0x10fca esp 0xf7e edi 0xb880 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x246 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0x10c01 ecx 0x700 edx 0x112 biosint: ebp 0x10fca esp 0xf90 edi 0xb880 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x246 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0x10c01 ecx 0x701 edx 0x112 biosint: ebp 0x10fca esp 0xf90 edi 0xb880 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x246 biosint: INT# 0x15 biosint: eax 0x5f18 ebx 0x187d4 ecx 0x7f01 edx 0x3d5 biosint: ebp 0x17f70 esp 0xfde edi 0x44 esi 0x187d4 biosint: ip 0x6533 cs 0xc000 flags 0x46 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0xc01 ecx 0x300 edx 0x112 biosint: ebp 0x10fc8 esp 0xf8c edi 0xac49 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x46 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0xc01 ecx 0x300 edx 0x112 biosint: ebp 0x10fc8 esp 0xf7c edi 0xb840 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x246 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0xc01 ecx 0x101 edx 0x112 biosint: ebp 0x10fc8 esp 0xf7c edi 0xb840 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x246 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0xc01 ecx 0x3a0 edx 0x112 biosint: ebp 0x10fc8 esp 0xf86 edi 0xb840 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x246 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0xc01 ecx 0x300 edx 0x112 biosint: ebp 0x10fc8 esp 0xf7c edi 0xb840 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x246 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0xc01 ecx 0x300 edx 0x112 biosint: ebp 0x10fc8 esp 0xf8e edi 0xb840 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x246 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0xc01 ecx 0x301 edx 0x112 biosint: ebp 0x10fc8 esp 0xf8e edi 0xb840 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x246 biosint: INT# 0x15 biosint: eax 0x5f06 ebx 0x18001 ecx 0x80010001 edx 0x0 biosint: ebp 0x10fd6 esp 0xfb4 edi 0x0 esi 0x146a7 biosint: ip 0x6479 cs 0xc000 flags 0x246 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0x10c01 ecx 0x80010000 edx 0x112 biosint: ebp 0x10fd6 esp 0xf88 edi 0x0 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x246 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0x10c01 ecx 0x80010000 edx 0x112 biosint: ebp 0x10fd6 esp 0xf78 edi 0x0 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x246 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0x10c01 ecx 0x80010101 edx 0x112 biosint: ebp 0x10fd6 esp 0xf78 edi 0x0 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x246 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0x10c01 ecx 0x80010001 edx 0x112 biosint: ebp 0x10fd6 esp 0xf82 edi 0x0 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x246 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0x10c01 ecx 0x80010000 edx 0x112 biosint: ebp 0x10fd6 esp 0xf78 edi 0x0 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x246 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0x10c01 ecx 0x80010000 edx 0x112 biosint: ebp 0x10fd6 esp 0xf8a edi 0x0 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x246 biosint: INT# 0x15 biosint: eax 0x5f01 ebx 0x10c01 ecx 0x80010001 edx 0x112 biosint: ebp 0x10fd6 esp 0xf8a edi 0x0 esi 0x1aacd biosint: ip 0x6448 cs 0xc000 flags 0x246 biosint: INT# 0x15 biosint: eax 0x5f08 ebx 0x18001 ecx 0x80010001 edx 0x0 biosint: ebp 0x10fd6 esp 0xfb4 edi 0x0 esi 0x146a7 biosint: ip 0x6485 cs 0xc000 flags 0x202 Devices initialized Copying IRQ routing tables to 0xf0000...done. Verifing copy of IRQ routing tables at 0xf0000...done Checking IRQ routing table consistency... check_pirq_routing_table() - irq_routing_table located at: 0x000f0000 done. ACPI: Writing ACPI tables at f0400... ACPI: * FACS ACPI: * DSDT @ 000f049e Length 3f0 ACPI: * FADT ACPI: added table 1/5 Length now 40 ACPI: done. Moving GDT to 0x500...ok Wrote linuxbios table at: 00000530 - 00000b70 checksum 5477
Welcome to elfboot, the open sourced starter. January 2002, Eric Biederman. Version 1.3
rom_stream: 0xfffd0000 - 0xfffeffff Found ELF candiate at offset 0 New segment addr 0x100000 size 0x31080 offset 0xc0 filesize 0xbde8 (cleaned up) New segment addr 0x100000 size 0x31080 offset 0xc0 filesize 0xbde8 New segment addr 0x131080 size 0x48 offset 0xbec0 filesize 0x48 (cleaned up) New segment addr 0x131080 size 0x48 offset 0xbec0 filesize 0x48 Dropping non PT_LOAD segment Dropping non PT_LOAD segment Loading Segment: addr: 0x0000000000100000 memsz: 0x0000000000031080 filesz: 0x000000000000bde8 Clearing Segment: addr: 0x000000000010bde8 memsz: 0x0000000000025298 Loading Segment: addr: 0x0000000000131080 memsz: 0x0000000000000048 filesz: 0x0000000000000048 Jumping to boot code at 0x109ad4 FILO version 0.5 (root@mm.int.mmtab.se) Wed May 31 13:44:15 CEST 2006 Press <Enter> for default boot, or <Esc> for boot prompt... boot: hda1:/vmlinuz-FC5.elf find_ide_controller: found PCI IDE controller 1106:0571 prog_if=0x8a find_ide_controller: primary channel: compatibility mode find_ide_controller: cmd_base=0x1f0 ctrl_base=0x3f4 ide_software_reset: Waiting for ide0 to become ready for reset... ok init_drive: Testing for hda init_drive: Probing for hda init_drive: LBA mode, sectors=268435455 init_drive: LBA48 mode, sectors=321672960 init_drive: Init device params... ok hda: LBA48 164GB: HDS722516VLAT80 Mounted ext2fs Loading Linux version 2.6.16-1.2111_FC5 (bhcompile@hs20-bc1-3.build.redhat.com) #1 Thu May 4 21:16:58 EDT 2006... Jumping to entry point... 0
LinuxBIOS-1.1.8.0Fallback Wed May 31 13:15:25 CEST 2006 starting... Enabling mainboard devices Enabling shadow ram vt8623 init starting ---8<--------------------------------------------------------------
Then it keeps restarting ???
Any hints someone??
Per
n Wed, 31 May 2006 07:56:44 -0600, Myles Watson wrote
I used the stock FC4 kernel with the same command line as you used. My autoboot was just hdb1:/linux_2.6.16.elf (I have a CD-ROM as hda)
Good luck,
Myles
-----Original Message----- From: linuxbios-bounces@linuxbios.org [mailto:linuxbios-bounces@linuxbios.org] On Behalf Of Per Mellander Sent: Wednesday, May 31, 2006 6:53 AM To: myles@mouselemur.cs.byu.edu Cc: linuxbios@linuxbios.org Subject: Re: [LinuxBIOS] EPIA-MII 12000, almost there. ( newbie )
Now I get so far that the kernel is identified and loaded but then it breaks :(
I created an elf with mkelfImage:
# mkelfImage --kernel=/vmlinuz-2.6.16-1.2111_FC5 --output=/vmlinuz.elf --initrd=/initrd-2.6.16-1.2111_FC5.img --command-line="ro root=LABEL=/ rhgb quiet console=ttyS0 console=ttyS0,115200"
----8<-------------------------------------------------------------
Jumping to boot code at 0x109ad4 FILO version 0.5 (root@mm.int.mmtab.se) Wed May 31 13:44:15 CEST 2006 Press <Enter> for default boot, or <Esc> for boot prompt... timed out boot: hda1:/vmlinuz.elf find_ide_controller: found PCI IDE controller 1106:0571 prog_if=0x8a find_ide_controller: primary channel: compatibility mode find_ide_controller: cmd_base=0x1f0 ctrl_base=0x3f4 ide_software_reset: Waiting for ide0 to become ready for reset... ok init_drive: Testing for hda init_drive: Probing for hda init_drive: LBA mode, sectors=268435455 init_drive: LBA48 mode, sectors=321672960 init_drive: Init device params... ok hda: LBA48 164GB: HDS722516VLAT80 Mounted ext2fs Loading Linux version 2.6.16-1.2111_FC5 (bhcompile@hs20-bc1-3.build.redhat.com) #1 Thu May 4 21:16:58 EDT 2006... Jumping to entry point... 0
LinuxBIOS-1.1.8.0Fallback Wed May 31 13:15:25 CEST 2006 starting... Enabling mainboard devices Enabling shadow ram
----8<-------------------------------------------------------------
I get the same result when I try,
AUTOBOOT_FILE = "hda1:/vmlinuz initrd=/initrd.img root=/dev/hda1 console=tty0 console=ttyS0,115200"
so the problem is not in the elf image.
Could you please send me a snippet from your AUTOBOOT or similar?
Btw. Do I have to make a 'special' kernel to make this work or should the stock FC5 work?
/Per
On Tue, 30 May 2006 08:38:53 -0600, Myles Watson wrote
Did you try using mkelfImage from ftp://ftp.lnxi.com/pub/mkelfImage ? It combines the vmlinuz & initrd files into one.
To get my machine to boot I used the same kernel parameters as I found in grub, set up by Fedora.
-- linuxbios mailing list linuxbios@linuxbios.org http://www.openbios.org/mailman/listinfo/linuxbios
-- linuxbios mailing list linuxbios@linuxbios.org http://www.openbios.org/mailman/listinfo/linuxbios