Sounds good, any HOWTOs you can produce should be an interesting read.
If you have any difficulty with AGP, let us know. We've tested the S2885 with a GeForce FX 5600 card with nVidia's driver and Linux AGPGART and have been rather pleased with the results.
On Thu, 15 Jul 2004, David Aubin wrote:
Current status is this:
- Boot with linux bios on Tyan MB with 2885 chipset
- Linux bios payload is my custom (static ip support) etherboot with
filo 3. etherboot then remotely retrieves elf image of a 2.6 kernel and initrd A. filo with usb does not work for some reason with my setup, it is something I want/need 4. Then USB stick is mounted with custom initrd to USB support 5. Home made 2.6 linux boots up 6. inside boot.local I have the call to enable Nvidia bios ./testbios -s 65536 -d 0x200 -t --abseg /dev/mem ./vgabios 7. Then I have currently xf86config configured to use old nv driver(#18?) for x windows. A. I'm in the process now of integrating the new Nvidia driver and that is my goal.
Appendix: A. I can log in via serial console or remotely with (tftp, rlogin, ssh for debugging)
On Thu, 2004-07-15 at 15:50, Hendricks David W. wrote:
So what's your current status, anyway? You boot with LinuxBIOS and FILO/Etherboot, then log in remotely (Serial or ethernet?) and run the testbios, then start X? Are you using framebuffering or anything for console support?
On Thu, 15 Jul 2004, David Aubin wrote:
Hi Ron,
It is good to give. I think I will, just please don't hold your breath on this.
Thanks, Dave On Thu, 2004-07-15 at 15:15, ron minnich wrote:
On Thu, 15 Jul 2004, David Aubin wrote:
Yeah, its works:)
GREAT!
Wanna write a howto and FAQ?
ron