The board-status you submitted relies on local changes. Can you send output of 'git log --oneline db945ff860' so we have better record of what you had done to make it boot again?
Yes, sure.
db945ff860 amd/bettong: Enable SATA controller 492898593f southbridge/amd/pi/hudson : Revert partially commit bfb5c807e720761f4457d5106bb919f2aacb5535 2a6f9b229d New PCI ID for FCH SATA Controller (AHCI Mode) for AMD driver. 3a39f67087 New PCI ID for Family 15h (Models 60h-6fh) I/O Memory Management Unit 5193b19f4d domain_acpi_name function missing in 00660F01 northbridge. 73303655d8 New PCI ID for FCH SATA Controller (AHCI Mode) bcdba6ec30 Revert commit bfb5c807e720761f4457d5106bb919f2aacb5535 binaryPI: Drop PSP Secure OS from build ac6c12dcd1 {northbridge,soc,southbridge}: Don't use both of _ADR and _HID f77f2c79c2 pcengines/apu2: Switch away from BINARYPI_LEGACY_WRAPPER
from here is what you can get from the master repo.
You need to replicate [1] for NORTHBRIDGE_AMD_PI_00660F01 and [2] for mb/amd/bettong. AGESA blobs were sometimes modified in unpredictable ways, so it probably will not work out-of-the-box.
These patches could be applied onto my current branch? Or I have to use the master branch?
Regards, Jorge