Applied.
* Carl-Daniel U. Hailfinger c-d.hailfinger.devel.2006@gmx.net [060731 16:45]:
With the following (whitespace-damaged) patch
Index: flash.h
--- flash.h (Revision 2350) +++ flash.h (Arbeitskopie) @@ -59,6 +59,7 @@ #define W_29C011 0xC1 /* Winbond w29c011 device code */ #define W_29C020C 0x45 /* Winbond w29c020c device code */ #define W_39V040A 0x3D /* Winbond w39v040a device code */ +#define W_39V040B 0x54 /* Winbond w39v040b device code */ #define W_49F002U 0x0B /* Winbond w49F002u device code */ #define W_49V002A 0xB0 /* Winbond W49V002A device code */ #define W_49V002FA 0x32 /* Winbond W49V002FA device code */ Index: flash_enable.c =================================================================== --- flash_enable.c (Revision 2350) +++ flash_enable.c (Arbeitskopie) @@ -396,6 +396,7 @@ {0x1022, 0x7468, "AMD8111", enable_flash_amd8111}, // this fallthrough looks broken. {0x10de, 0x0050, "NVIDIA CK804", enable_flash_ck804}, // LPC
{0x10de, 0x0261, "NVIDIA C51", enable_flash_ck804}, {0x10de, 0x0051, "NVIDIA CK804", enable_flash_ck804}, // Pro {0x10de, 0x00d3, "NVIDIA CK804", enable_flash_ck804}, // Slave, should not be here, to fix known bug for A01. {0x1002, 0x4377, "ATI SB400", enable_flash_sb400}, // ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80)Index: flashchips.c
--- flashchips.c (Revision 2350) +++ flashchips.c (Arbeitskopie) @@ -88,6 +88,8 @@ probe_jedec, erase_chip_jedec, write_49f002, NULL}, {"W39V040A", WINBOND_ID, W_39V040A, NULL, 512, 64*1024, probe_jedec, erase_chip_jedec, write_39sf020, NULL},
{"W39V040B", WINBOND_ID, W_39V040B, NULL, 512, 64*1024,probe_jedec, erase_chip_jedec, write_39sf020, NULL}, {"M29F040B", ST_ID, ST_M29F040B, NULL, 512, 64 * 1024, probe_29f040b, erase_29f040b, write_29f040b, NULL}, {"M29F400BT", ST_ID, ST_M29F400BT, NULL, 512, 64 * 1024,I get this result: # LinuxBIOSv2/util/flashrom/flashrom Calibrating delay loop... ok No LinuxBIOS table found. Enabling flash write on NVIDIA C51...OK W39V040B found at physical address: 0xfff80000 Flash part is W39V040B OK, only ENABLING flash write, but NOT FLASHING.
There is one small problem: I depend on this board very much since my laptop is in repair. So I can't test whether writing would work. The only difference between W39V040B (new) and W39V040A (supported) ist that W39V040B is a LPC chip instead of FWH. I don't know whether that matters for flashing.
Regards, Carl-Daniel --
Echte DSL-Flatrate dauerhaft für 0,- Euro*. Nur noch kurze Zeit! "Feel free" mit GMX DSL: http://www.gmx.net/de/go/dsl